forksand-it-manual/source/resources/apps/sharkfork-bootstrap/forksand-sf-proxmox

#!/bin/bash
# forksand-sf-proxmox
# GPLv3+
# This script does some initial setup and config
# Sets up Proxmox.

# XXX DRAFT XXX

exit 0
# Run this on workstation:
# ssh -N -C -L 18021:localhost:8006 sf-001
# ssh -N -C -L 18022:localhost:8006 sf-002
# ssh -N -C -L 18023:localhost:8006 sf-003
# ssh -N -C -L 18024:localhost:8006 sf-004

# Only logging into one at a time is possible. Session management :|  XXX
# firefox https://localhost:18021
# firefox https://localhost:18022
# firefox https://localhost:18023
# firefox https://localhost:18024
#
# Login as root user via PAM
# Set up Enterprise Key, if used
#
#
cd /etc ; git add . ; git commit -a -m 'Initial Proxmox configuration'
#
#
# XXX Set up vmbr0 via web interface.
#
# Network
# Bridges ? XXX
# Set up static IPs on each interface in Proxmox web gui
#

cd /etc ; git add . ; git commit -a -m 'Configure ethernet addresses'

# Reboot!


# Configure Corosync
# Set up hosts
# XXX MAKE SURE NEW NODES GET ADDED TO EXISTING SERVER /etc/hosts
cat > /etc/hosts <<EOF
127.0.0.1      localhost

# The following lines are desirable for IPv6 capable hosts
::1     localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters

10.22.22.1      sf-001.forksand.com     sf-001
10.22.22.2      sf-002.forksand.com     sf-002
10.22.22.3      sf-003.forksand.com     sf-003
10.22.22.4      sf-004.forksand.com     sf-004
10.3.1.1        sf-001-coro1
10.3.1.2        sf-002-coro1
10.3.1.3        sf-003-coro1
10.3.1.4        sf-004-coro1
10.3.2.1        sf-001-coro2
10.3.2.2        sf-002-coro2
10.3.2.3        sf-003-coro2
10.3.2.4        sf-004-coro2
10.68.68.1      sf-001-migrate
10.68.68.2      sf-002-migrate
10.68.68.3      sf-003-migrate
10.68.68.4      sf-004-migrate
10.99.1.1       sf-001-file1
10.99.1.2       sf-002-file1
10.99.1.3       sf-003-file1
10.99.1.4       sf-004-file1
10.99.2.1       sf-001-file2
10.99.2.2       sf-002-file2
10.99.2.3       sf-003-file2
10.99.2.4       sf-004-file2
EOF

cd /etc ; git commit -m 'Add hosts' hosts

# Test cluster ping
echo "Testing coro1 pings"
for i in sf-001-coro1 sf-002-coro1 sf-003-coro1 sf-004-coro1
do ping -q -c1 $i
done
echo "Testing coro2 pings"
for i in sf-001-coro2 sf-002-coro2 sf-003-coro2 sf-004-coro2
do ping -q -c1 $i
done
echo "Testing migrate pings"
for i in sf-001-migrate sf-002-migrate sf-003-migrate sf-004-migrate
do ping -q -c1 $i
done
echo "Testing DMZ pings"
for i in sf-001 sf-002 sf-003 sf-004
do ping -q -c1 $i
done

# XXX set up ssh keys
# Add them to:
cat /root/.ssh/id_rsa.pub
# /etc/pve/priv/authorized_keys
cd /etc ; git commit -m 'Set up ssh keys' /etc/pve/priv/authorized_keys

# Test ssh
echo "Testing coro1 ssh"
for i in sf-001-coro1 sf-002-coro1 sf-003-coro1 sf-004-coro1
do ssh $i hostname
done
echo "Testing coro2 ssh"
for i in sf-001-coro2 sf-002-coro2 sf-003-coro2 sf-004-coro2
do ssh $i hostname
done
echo "Testing migrate ssh"
for i in sf-001-migrate sf-002-migrate sf-003-migrate sf-004-migrate
do ssh $i hostname
done
# ssh via IP
echo "Testing coro1 ssh by IP"
for i in 10.3.1.1 10.3.1.2 10.3.1.3 10.3.1.4
do ssh $i hostname
done
echo "Testing coro2 ssh by IP"
for i in 10.3.2.1 10.3.2.2 10.3.2.3 10.3.2.4
do ssh $i hostname
done
echo "Testing migrate ssh by IP"
for i in 10.68.68.1 10.68.68.2 10.68.68.3 10.68.68.4
do ssh $i hostname
done



# Run this on JUST ONE NODE, sf-001, to get the cluster started:
pvecm create sharkfork -bindnet0_addr 10.3.1.1 -ring0_addr 10.3.1.1 -bindnet1_addr 10.3.2.1 -ring1_addr 10.3.2.1

# Run on sf-002
pvecm add 10.3.1.1 --ring0_addr 10.3.1.2 --ring1_addr 10.3.2.2 --use_ssh
# Run on sf-003
pvecm add 10.3.1.1 --ring0_addr 10.3.1.3 --ring1_addr 10.3.2.3 --use_ssh
# Run on sf-004
pvecm add 10.3.1.1 --ring0_addr 10.3.1.4 --ring1_addr 10.3.2.4 --use_ssh

# Check status
pvecm status
pvecm nodes

# rebootz ?

# After Cluster is Configured
# ===========================

# Now you only have to log into one Proxmox node to control them all.

# Data Center --> Permissions --> Users
# Add user with Realm Proxmox VE authentication server.
# Give user root permissions:  Datacenter --> Permissions --> Add --> User permission.
#   Path: /  User: j   Role: Administrator
# XXX Or create admin group, add perms to that...
# Permissions --> Authentication. Set Proxmox VE authentication server to default.

# Storage
# Datacenter --> Storage --> Edit local. Enable all content (add VZDump)
#
# DNS
# sf-003 (host) --> System --> DNS
# Add servers:
# 208.67.222.222 208.67.220.220 37.235.1.174
#


# XXX Ceph
echo "Testing file1 pings"
for i in sf-001-file1 sf-002-file1 sf-003-file1 sf-004-file1
do ping -q -c1 $i
done
echo "Testing file2 pings"
for i in sf-001-file2 sf-002-file2 sf-003-file2 sf-004-file2
do ping -q -c1 $i
done
echo "Testing file1 ssh"
for i in sf-001-file1 sf-002-file1 sf-003-file1 sf-004-file1
do ssh $i hostname
done
echo "Testing file2 ssh"
for i in sf-001-file2 sf-002-file2 sf-003-file2 sf-004-file2
do ssh $i hostname
done
#echo "Testing file1 ssh by IP"
#for i in 10.99.1.1 10.99.1.2 10.99.1.3 10.99.1.4
#do ssh $i hostname
#done
#echo "Testing file2 ssh by IP"
#for i in 10.99.2.1 10.99.2.2 10.99.2.3 10.99.2.4
#do ssh $i hostname
#done