diff --git a/source/resources/apps/sharkfork-bootstrap/forksand-sf-proxmox b/source/resources/apps/sharkfork-bootstrap/forksand-sf-proxmox
index b84ca72..0b991d2 100755
--- a/source/resources/apps/sharkfork-bootstrap/forksand-sf-proxmox
+++ b/source/resources/apps/sharkfork-bootstrap/forksand-sf-proxmox
@@ -65,14 +65,10 @@ ff02::2 ip6-allrouters
 10.68.68.2      sf-002-migrate
 10.68.68.3      sf-003-migrate
 10.68.68.4      sf-004-migrate
-10.99.1.1       sf-001-file1
-10.99.1.2       sf-002-file1
-10.99.1.3       sf-003-file1
-10.99.1.4       sf-004-file1
-10.99.2.1       sf-001-file2
-10.99.2.2       sf-002-file2
-10.99.2.3       sf-003-file2
-10.99.2.4       sf-004-file2
+10.99.99.1      sf-001-file
+10.99.99.2      sf-002-file
+10.99.99.3      sf-003-file
+10.99.99.4      sf-004-file
 EOF
 
 cd /etc ; git commit -m 'Add hosts' hosts
@@ -144,13 +140,115 @@ pvecm add 10.3.1.1 --ring0_addr 10.3.1.4 --ring1_addr 10.3.2.4 --use_ssh
 pvecm status
 pvecm nodes
 
-# rebootz ?
+cd /etc ; git add . ; git commit -a -m 'Setup Proxmox cluster'
+
 
 # After Cluster is Configured
 # ===========================
 
 # Now you only have to log into one Proxmox node to control them all.
 
+# XXX Ceph
+echo "Testing file pings"
+for i in sf-001-file sf-002-file sf-003-file sf-004-file
+do ping -q -c1 $i
+done
+
+
+# Install Ceph
+# Run this on all nodes:
+pveceph install
+cd /etc ; git add . ; git commit -a -m 'Install Ceph'
+
+# Run this on just sf-001
+pveceph init --network 10.99.99.0/24
+cd /etc ; git add . ; git commit -m 'Ceph init' ceph/ pve/ceph.conf
+
+# on sf-002 sf-003 sf-004
+cd /etc ; git add . ; git commit -m 'Ceph init' pve/ceph.conf
+
+# DONT RUN SIMULTANEOUSLY XXX
+# Run on sf-001
+pveceph createmon
+cd /etc ; git add . ; git commit -m 'Ceph createmon'
+# Do the other ones via web gui
+#
+cd /etc ; git add . ; git commit -m 'Add Ceph mons via web gui'
+
+
+# Looks like this auto creates. Not needed
+#pveceph createmgr
+#cd /etc ; git add . ; git commit -m 'Ceph createmgr'
+
+
+# Create GPT partition table on each Ceph drive, with correct device name:
+# gdisk /dev/sd[X]
+
+# sf-001
+# Then 'w' to write new GPT table
+gdisk /dev/sdb
+gdisk /dev/sdc
+gdisk /dev/sdd
+
+# sf-002
+gdisk /dev/sdb
+gdisk /dev/sdc
+gdisk /dev/sdd
+
+# sf-003
+# Create blank GPT ?
+gdisk /dev/nvme0n1
+gdisk /dev/nvme1n1
+gdisk /dev/nvme2n1
+gdisk /dev/nvme3n1
+
+# sf-004
+gdisk /dev/nvme0n1
+gdisk /dev/nvme1n1
+gdisk /dev/nvme2n1
+gdisk /dev/nvme3n1
+gdisk /dev/nvme4n1
+gdisk /dev/nvme5n1
+
+# Add OSDs
+# Do this via web, not command line.
+cd /etc ; git add . ; git commit -m 'Add Ceph OSDs via web gui'
+
+# Via Web GUI, add pools:
+# Name: sharkpool
+# Size: 3 (default)
+# Min Size: 2 (default)
+# Crush Rule: replicated rule (default)
+# pg_num: 64 (default)  XXX try 256
+# Add storages: unchecked (default)
+cd /etc ; git add . ; git commit -m 'Add Ceph pools via web gui'
+
+
+## Add keyring so it can be PVE ceph client
+# Not needed ???
+## Just on sf-001
+#mkdir /etc/pve/priv/ceph
+#cp /etc/pve/priv/ceph.client.admin.keyring /etc/pve/priv/ceph/my-ceph-storage.keyring
+
+# In web GUI, go to:
+# Datacenter -> storage
+# and add and RDB (PVE) container/images
+
+#
+# XXX
+# Reinstall if things go bad:
+/etc/init.d/ceph stop ; apt -y purge ceph ceph-base ceph-mgr ceph-mon ceph-osd ; apt -y autoremove --purge ; mv /var/lib/ceph/ /var/lib/foobar-ceph ; rm -rf /etc/pve/ceph*  /etc/ceph/ceph.conf /etc/pve/priv/ceph* /etc/systemd/system/ceph-mon.target.wants /etc/systemd/system/ceph-mon.target.wants/ceph-mon@sf-001.service /etc/ceph/ceph.client.admin.keyring
+
+apt -y --reinstall install ceph-common
+# rm stuff that isn't in ceph-common
+find /etc -name "*ceph*"
+pveceph install
+# XXX
+
+
+
+
+# MISC
 # Data Center --> Permissions --> Users
 # Add user with Realm Proxmox VE authentication server.
 # Give user root permissions:  Datacenter --> Permissions --> Add --> User permission.
@@ -166,30 +264,3 @@ pvecm nodes
 # Add servers:
 # 208.67.222.222 208.67.220.220 37.235.1.174
 #
-
-
-# XXX Ceph
-echo "Testing file1 pings"
-for i in sf-001-file1 sf-002-file1 sf-003-file1 sf-004-file1
-do ping -q -c1 $i
-done
-echo "Testing file2 pings"
-for i in sf-001-file2 sf-002-file2 sf-003-file2 sf-004-file2
-do ping -q -c1 $i
-done
-echo "Testing file1 ssh"
-for i in sf-001-file1 sf-002-file1 sf-003-file1 sf-004-file1
-do ssh $i hostname
-done
-echo "Testing file2 ssh"
-for i in sf-001-file2 sf-002-file2 sf-003-file2 sf-004-file2
-do ssh $i hostname
-done
-#echo "Testing file1 ssh by IP"
-#for i in 10.99.1.1 10.99.1.2 10.99.1.3 10.99.1.4
-#do ssh $i hostname
-#done
-#echo "Testing file2 ssh by IP"
-#for i in 10.99.2.1 10.99.2.2 10.99.2.3 10.99.2.4
-#do ssh $i hostname
-#done