|
|
%
|
|
|
% Firewall-opnsense.tex
|
|
|
%
|
|
|
% Fork Sand IT Manual
|
|
|
%
|
|
|
% Copyright (C) 2018, Fork Sand, Inc.
|
|
|
% Issued by Oleksandr Papevis
|
|
|
%
|
|
|
% This document is licensed under the Creative Commons Attribution 4.0
|
|
|
% International Public License (CC BY-SA 4.0) by Fork Sand, Inc.
|
|
|
%
|
|
|
|
|
|
\section{Hardware Overview}
|
|
|
|
|
|
\begin{itemize}
|
|
|
\item OPNsense is based on FreeBSD \\ \url{https://opnsense.org/}
|
|
|
\\ \url{https://wiki.opnsense.org/index.html}
|
|
|
\item Iris FW1100 datasheet \\ \url{https://www.supermicro.com/products/system/1U/1018/SYS-1018D-FRN8T.cfm}
|
|
|
\end{itemize}
|
|
|
|
|
|
The Supermicro SuperServer 1018D-FRN8T is a 1U server with front I/O.
|
|
|
That means that both the rear I/O ports as well as the I/O expansion
|
|
|
ports are found along the front side of the rack. In many cases this
|
|
|
is a desirable configuration as it can make cabling very simple.
|
|
|
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ss-front.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T Front}
|
|
|
\label{fig:supermicroSSfront}
|
|
|
\end{figure}
|
|
|
|
|
|
The rear of the unit has a redundant 400W power supply. Rated at 80
|
|
|
Plus Platinum the power supplies are efficient as well. The remainder
|
|
|
of the rear is simply a bezel for fans.
|
|
|
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ss-rear.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T Rear}
|
|
|
\label{fig:supermicroSSrear}
|
|
|
\end{figure}
|
|
|
|
|
|
The onboard I/O is plentiful. There are two USB 3.0 ports along with
|
|
|
a VGA port for KVM carts. Above the USB ports there is a RJ-45
|
|
|
Ethernet port for out-0f-band management that can be directly
|
|
|
connected to a dedicated management network.
|
|
|
%-------------------
|
|
|
Furthermore there are
|
|
|
six 1GbE ports connected to two Intel i210-at controllers and an
|
|
|
Intel i350-am4 controller. The two SFP+ ports are controlled by the
|
|
|
Xeon D’s Intel X552 NIC. For \glspl{firewall} and other appliances, this is
|
|
|
a very strong configuration.
|
|
|
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/iris-fw1100-front.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T interfaces}
|
|
|
\label{fig:supermicroSSinterfaces}
|
|
|
\end{figure}
|
|
|
|
|
|
Inside the system we see a redundant set of fans near the PSU bezel
|
|
|
and a very small motherboard inside. One can see our two stacks of
|
|
|
Seagate Enterprise Capacity V3 1TB 7200rpm drives as well. We removed
|
|
|
the PCIe riser and the airflow shroud from this picture to show off
|
|
|
the internals better.
|
|
|
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ss-noshroud.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T Internal no shroud}
|
|
|
\label{fig:supermicroSSnoshroud}
|
|
|
\end{figure}
|
|
|
|
|
|
\subsection{Remote Management}
|
|
|
|
|
|
Supermicro’s IPMI and KVM-over-IP enables deployment flexibility.
|
|
|
One can do remote power up, power down, and reset of the server in
|
|
|
the event that it becomes unresponsive.
|
|
|
|
|
|
\begin{itemize}
|
|
|
\item fan speeds, chassis intrusion sensors, thermal sensors,
|
|
|
and etc. can be monitored remotely
|
|
|
\item remote power control. One can do remote power up, power
|
|
|
down, and reset of the server in the event that it becomes
|
|
|
unresponsive.
|
|
|
\item alerts can be setup to notify the admins of issues.
|
|
|
\item remotely mount CD images and floppy images to the machine
|
|
|
over the dedicated management Ethernet controller. This keeps
|
|
|
maintenance traffic off of the primary Intel NICs.
|
|
|
At the same time it removes the need for an optical disk to
|
|
|
be connected to the Supermicro motherboard.
|
|
|
\end{itemize}
|
|
|
|
|
|
Supermicro's BIOS has a feature: the BMC IP address shows
|
|
|
up on the post screen!
|
|
|
If you have a KVM cart hooked up to the system, it gives an
|
|
|
indicator of which machine one is connected to during post.
|
|
|
|
|
|
Supermicro does include KVM-over-IP functionality with the motherboard.
|
|
|
|
|
|
\begin{itemize}
|
|
|
\item Default IPMI connection is in cleartext http.
|
|
|
\item SSL certificate for Supermicro IPMI is bad (like all of them).
|
|
|
\item Can't change password on IPMI.
|
|
|
%\item Root password for server and IPMI is sent via email.
|
|
|
%\item There is an attack window between their machine imaging and first login.
|
|
|
%\item Customer should control timing of first power on.
|
|
|
%\item System is also possibly vuln during the ISP's initial power up and commissioning period.
|
|
|
%\item First reboot, the system hung (.png XXX).
|
|
|
%\item Hard reset, lots of DHCP queries at boot.
|
|
|
%\item A \texttt{debian} user was on the system, password unknown. Check \texttt{/home}!
|
|
|
%\item They block NTP to prevent DDoS, so you have to use their time server
|
|
|
% \texttt{time.sharktech.net}
|
|
|
\end{itemize}
|
|
|
|
|
|
\subsection{Supermicro Setup over IPMI bios}
|
|
|
{{\grenewcommand{\currentColor}{secondary-brown}}}
|
|
|
{{\grenewcommand{\currentTextColor}{ao-black}}}
|
|
|
\providecommand{\sharkIPConfigItem}[4]{}
|
|
|
\renewcommand{\sharkIPConfigItem}[4]{
|
|
|
\rowcolor{\currentColor} \vspace{-1pt}
|
|
|
\rule[-0.3em]{0pt}{-0.5em} \vspace{-1pt}
|
|
|
\small{\textcolor{\currentTextColor}{#1}} & \vspace{-1pt}
|
|
|
\small{\textcolor{\currentTextColor}{#2}} \\
|
|
|
}
|
|
|
\providecommand{\sharkIPConfigLastItem}[4]{}
|
|
|
\renewcommand{\sharkIPConfigLastItem}[4]{
|
|
|
\rowcolor{\currentColor} \vspace{-1pt}
|
|
|
\rule[-1.0em]{0pt}{1em} \vspace{-1pt}
|
|
|
\small{\textcolor{\currentTextColor}{#1}} & \vspace{-1pt}
|
|
|
\small{\textcolor{\currentTextColor}{#2}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
}
|
|
|
\providecommand{\SIPCCwidth}{3.5cm}
|
|
|
\renewcommand{\SIPCCwidth}{5cm}
|
|
|
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-ipmi-init.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T PEI-IPMI Initialization}
|
|
|
\label{fig:supermicroSSCIpmiInit}
|
|
|
\end{figure}
|
|
|
|
|
|
Before IPMI Initialization, choose in Boot Agent GE an entry PXE
|
|
|
(Preboot eXecution Environment)
|
|
|
|
|
|
In Aptio Setup Utility set the following Boot Features:
|
|
|
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw BIOS configs}% \label{tab:sharkNodeIPConfig}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Boot Feature}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { SMCBiosActionFlag }{ \char`[0\char`] }{}{}
|
|
|
\sharkIPConfigItem { SumBbsSupportFlag }{ 48 }{}{}
|
|
|
\sharkIPConfigLastItem{ Bridge ports }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigItem { SumBbsSupportFlag }{ \char`[Force BIOS\char`] }{}{}
|
|
|
\sharkIPConfigItem { SumBbsSupportFlag }{ \char`[On\char`] }{}{}
|
|
|
\sharkIPConfigItem { SumBbsSupportFlag }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigItem { SumBbsSupportFlag }{ \char`[Immediate\char`] }{}{}
|
|
|
\sharkIPConfigLastItem{ Subnet mask }{ \char`[Disabled\char`] }{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
Set system Date/Time
|
|
|
|
|
|
\newpage
|
|
|
\subsection*{\textcolor{ao-white}{ Supermicro Setup over IPMI bios1}}
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-ipmi-boot1.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T Bios prompt for boot-menu}
|
|
|
\label{fig:supermicroSSCIpmiBoot1}
|
|
|
\end{figure}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw BIOS configs continued}% \label{tab:sharkNodeIPConfig}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Boot Feature}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Power Configuration }{}{}{}
|
|
|
\sharkIPConfigItem { Watch Dog Function }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigItem { Power button Function }{ \char`[4 Seconds Override\char`] }{}{}
|
|
|
\sharkIPConfigLastItem{ Subnet mask }{ \char`[Power On\char`] }{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-ipmi-boot2.png}
|
|
|
\caption{Supermicro SuperServer 1018D-FRN8T Bootstrap loader}
|
|
|
\label{fig:supermicroSSCIpmiBoot2}
|
|
|
\end{figure}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw BIOS configs continued}% \label{tab:sharkNodeIPConfig}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Boot Feature}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Onboard LAN1 OPROM }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigItem { Onboard LAN2 OPROM }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigLastItem{ Onboard LAN3 - LAN8 OPROM }{ \char`[Disabled\char`] }{}{}
|
|
|
\sharkIPConfigItem { Legacy Boot Order \char`#1}{ \char`[USB Key:Virtual Disk\char`] }{}{}
|
|
|
\sharkIPConfigLastItem{ Legacy Boot Order \char`#2 - \char`#7}{ \char`[Disabled\char`] }{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-ipmi-opnsense-boot1.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Boot variant}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseBoot1}
|
|
|
\end{figure}
|
|
|
Let default option 5 execute.
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw LSI Corp Config Utility}% \label{tab:sharkNodeIPConfig}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Adapter }{LSI2116-IT}{}{}
|
|
|
\sharkIPConfigItem { PCI Slot }{0B}{}{}
|
|
|
\sharkIPConfigItem { PCI Address(Bus/Dev) }{02:00}{}{}
|
|
|
\sharkIPConfigItem { MPT Firmware Revision }{20.00.07.00-IT}{}{}
|
|
|
\sharkIPConfigItem { SAS Address }{50030480:1E300A01}{}{}
|
|
|
\sharkIPConfigItem { NVDATA Version }{14.01.40.00}{}{}
|
|
|
\sharkIPConfigItem { Status }{Disabled}{}{}
|
|
|
\sharkIPConfigItem { Boot Order}{0}{}{}
|
|
|
\sharkIPConfigLastItem{ Boot Support}{ \char`[Disabled\char`] }{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\subsection{Configurate with OPNsense Dashboard}
|
|
|
{{\grenewcommand{\currentColor}{primary-blue}}}
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash1.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash1}
|
|
|
\end{figure}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw LSI Corp Config Utility}% \label{tab:sharkNodeIPConfig}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Hostname }{sf-fw1}{}{}
|
|
|
\sharkIPConfigItem { Domain }{forksand.com}{}{}
|
|
|
\sharkIPConfigItem { Language }{English}{}{}
|
|
|
\sharkIPConfigItem { Primary DNS Server }{216.146.35.35}{}{}
|
|
|
\sharkIPConfigItem { Secondary DNS Server }{208.67.222.222}{}{}
|
|
|
\sharkIPConfigLastItem{ Override DNS }{unchecked}{}{}
|
|
|
\sharkIPConfigLastItem{ Enable Resolver}{checked}{}{}
|
|
|
\sharkIPConfigLastItem{ Others }{leave unchecked}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\begin{itemize}
|
|
|
\item Set server time information
|
|
|
\item Configure WAN interface, DHCP, subnet masks /32, Block .. Flags checked, others empty
|
|
|
\item Configure WAN interface, IP 192.168.1.1 change to 192.168.110.21, subnet mask /24
|
|
|
\item Set Web GUI Password
|
|
|
\item Reload to apply changes
|
|
|
\item Finished initial configuration, click a href "continue to the dashboard"
|
|
|
\item Configure console appears, refer to table
|
|
|
\ref{tab:supermicroSSCIpmiOpnsenseDash2} on p. \pageref{tab:supermicroSSCIpmiOpnsenseDash2}
|
|
|
\item Set root password and reboot
|
|
|
\item Re-enter Aptio Setup Utility Boot tab
|
|
|
\item Switch Legacy Boot Order \char`#1 \char` to [Hard Disk: SATADOM-...\char`]
|
|
|
\item Start the boot
|
|
|
\item OPNsense: Let default option 5 execute
|
|
|
\end{itemize}
|
|
|
{{\grenewcommand{\currentColor}{secondary-brown}}}
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash2.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Continued}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash2}
|
|
|
\end{figure}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw LSI Corp Config Utility} \label{tab:supermicroSSCIpmiOpnsenseDash2}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Configure Console }{Accept these Settings}{}{}
|
|
|
\sharkIPConfigItem { Select task }{Guided installation}{}{}
|
|
|
\sharkIPConfigItem { Select a disk }{ada0: 600.00MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)}{}{}
|
|
|
\sharkIPConfigItem { Select install mode }{GPT/UEFI mode}{}{}
|
|
|
\sharkIPConfigItem { Swap Partition }{yes}{}{}
|
|
|
\sharkIPConfigLastItem{ Enable Resolver}{checked}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
{{\grenewcommand{\currentColor}{primary-blue}}}
|
|
|
\subsection{Update OPNsense Firmware using Dashboard}
|
|
|
\begin{itemize}
|
|
|
\item Enter OPNsense dashboard and make a backup, System -> Configuration -> Backups, save the XML
|
|
|
\item Execute update firmware, refer to figure
|
|
|
\ref{fig:supermicroSSCIpmiOpnsenseDash3} on p. \pageref{fig:supermicroSSCIpmiOpnsenseDash3}
|
|
|
\end{itemize}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash3-update.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Update Firmware}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash3}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Standby until updating finished, refer to figure
|
|
|
\ref{fig:supermicroSSCIpmiOpnsenseDash4} on p. \pageref{fig:supermicroSSCIpmiOpnsenseDash4}
|
|
|
\item Switch to tab Settings, refer to figure
|
|
|
\ref{fig:supermicroSSCIpmiOpnsenseDash5} on p. \pageref{fig:supermicroSSCIpmiOpnsenseDash5}
|
|
|
\end{itemize}
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash4-update.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Update Firmware Continued}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash4}
|
|
|
\end{figure}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash5-fw.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Firmware Settings}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash5}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Set mirror to LeaseWeb (San Francisco, US)
|
|
|
\item Set Flavour to LibreSSL
|
|
|
\item Set Release Type to Production
|
|
|
\item Click save and return to Updates tab.
|
|
|
\end{itemize}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash6-fw-updates.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Firmware Pending Updates}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash6}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Click Update now.
|
|
|
\item Standby until Update is completed.
|
|
|
\item Restore configs from XML, refer to figure
|
|
|
\ref{fig:supermicroSSCIpmiOpnsenseDash8} on p. \pageref{fig:supermicroSSCIpmiOpnsenseDash8}
|
|
|
\end{itemize}
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash7-fw-update.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Firmware Update Processing}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash7}
|
|
|
\end{figure}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash8-fw-backupandreboot.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard restore from XML config backup}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash8}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Upload the config and restore
|
|
|
\item Add a user, refer to figure
|
|
|
\ref{fig:supermicroSSCIpmiOpnsenseDash9} on p. \pageref{fig:supermicroSSCIpmiOpnsenseDash9}
|
|
|
using parameters from table
|
|
|
\ref{tab:supermicroSSCIpmiOpnsenseAddUser} on p. \pageref{tab:supermicroSSCIpmiOpnsenseAddUser}
|
|
|
\end{itemize}
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash9-user.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Add User}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash9}
|
|
|
\end{figure}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw OPNsense Dashboard Add User} \label{tab:supermicroSSCIpmiOpnsenseAddUser}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Username }{jebba}{}{}
|
|
|
\sharkIPConfigItem { Disabled }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Full name }{Jeff Moe}{}{}
|
|
|
\sharkIPConfigItem { E-mail }{moe@forksand.com}{}{}
|
|
|
\sharkIPConfigItem { Comment }{}{}{}
|
|
|
\sharkIPConfigItem { Expiration date }{}{}{}
|
|
|
\sharkIPConfigLastItem{ Group Memberships }{Member of admins}{}{}
|
|
|
\sharkIPConfigItem { Certificate }{unchecked}{}{}
|
|
|
\sharkIPConfigLastItem{ OTP seed }{}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash10-dhcpv4.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard DHCPv4}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash10}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Disable DHCPv4
|
|
|
\end{itemize}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw OPNsense Dashboard DHCPv4} \label{tab:supermicroSSCIpmiOpnsenseDhcpv4}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Enable }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Deny unknown clients }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Subnet }{192.168.110.0}{}{}
|
|
|
\sharkIPConfigItem { Subnet mask }{255.255.255.0}{}{}
|
|
|
\sharkIPConfigLastItem{ Range }{192.168.110.10 - 192.168.110.245}{}{}
|
|
|
\sharkIPConfigLastItem{ Others }{leave unchanged}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash11-plugins.png}
|
|
|
\includegraphics[keepaspectratio=true,trim=360mm 190mm 10mm 80mm,clip,width=1.0\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash11-plugins.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard Plugin Installation}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash11}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Make sure os-dyndns plugin installed
|
|
|
\item Install os-acme-client
|
|
|
\end{itemize}
|
|
|
%\begin{table}[!htb]
|
|
|
% \caption{sf-fw OPNsense Dashboard Plugins} \label{tab:supermicroSSCIpmiOpnsensePlugins}
|
|
|
% \begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
% \tabucline[2pt]{1-2}
|
|
|
% \multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
% \multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
% \tabucline[2pt]{1-2}
|
|
|
% \sharkIPConfigItem { Enable }{unchecked}{}{}
|
|
|
% \sharkIPConfigItem { Deny unknown clients }{unchecked}{}{}
|
|
|
% \sharkIPConfigItem { Subnet }{192.168.110.0}{}{}
|
|
|
% \sharkIPConfigItem { Subnet mask }{255.255.255.0}{}{}
|
|
|
% \sharkIPConfigLastItem{ Range }{192.168.110.10 - 192.168.110.245}{}{}
|
|
|
% \sharkIPConfigLastItem{ Others }{leave unchanged}{}{}
|
|
|
% \end{tabu}
|
|
|
%\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\begin{figure}[!htb]
|
|
|
\includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
{sf-fw/ssc-opns-dash12-lea.png}
|
|
|
\caption{Supermicro SuperServer OPNsense Dashboard add Let's Encrypt account}
|
|
|
\label{fig:supermicroSSCIpmiOpnsenseDash12}
|
|
|
\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Add Let's Encrypt account
|
|
|
\item Modify global Let's Encrypt settings
|
|
|
\item Apply Let's Encrypt settings
|
|
|
\item Refer to Certificates menu
|
|
|
\end{itemize}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw OPNsense Dashboard Let's Encrypt account and settings} \label{tab:supermicroSSCIpmiOpnsenseLea}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Enable }{checked}{}{}
|
|
|
\sharkIPConfigItem { Name }{sf-fw1}{}{}
|
|
|
\sharkIPConfigItem { Description }{\Gls{sharkfork} \Gls{firewall} 1}{}{}
|
|
|
\sharkIPConfigLastItem{ E-Mail address }{sharkfork@forksand.com}{}{}
|
|
|
\sharkIPConfigItem { Enable Plugin }{checked}{}{}
|
|
|
\sharkIPConfigItem { Auto Renewal }{checked}{}{}
|
|
|
\sharkIPConfigItem { Let's Encrypt Environment }{Production Environment \char`[Default\char`]}{}{}
|
|
|
\sharkIPConfigLastItem{ HAProxy Integration }{unchecked}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
%\begin{figure}[!htb]
|
|
|
% \includegraphics[keepaspectratio=true,height=1.10\textheight,width=1.00\textwidth,angle=0]
|
|
|
% {sf-fw/ssc-opns-dash13-cert.png}
|
|
|
% \caption{Supermicro SuperServer OPNsense Dashboard add Certificate}
|
|
|
% \label{fig:supermicroSSCIpmiOpnsenseDash12}
|
|
|
%\end{figure}
|
|
|
\begin{itemize}
|
|
|
\item Add Validation Method
|
|
|
\item Add Certificate
|
|
|
\item Apply ``Issue/Renew Certificates Now''
|
|
|
\end{itemize}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw OPNsense Dashboard Let's Encrypt validation} \label{tab:supermicroSSCIpmiOpnsenseLeaValid}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Validation Method }{}{}{}
|
|
|
\sharkIPConfigItem { Enable }{checked}{}{}
|
|
|
\sharkIPConfigItem { Name }{sf-fw1-http}{}{}
|
|
|
\sharkIPConfigItem { Description }{\Gls{sharkfork} \Gls{firewall} 1 http validation}{}{}
|
|
|
\sharkIPConfigLastItem{ Challenge Type }{HTTP-01}{}{}
|
|
|
\sharkIPConfigLastItem{ HTTP Service }{OPNsense Web Service (automatic port forward)}{}{}
|
|
|
\sharkIPConfigItem { IP Auto-Discovery }{checked}{}{}
|
|
|
\sharkIPConfigItem { Interface }{WAN}{}{}
|
|
|
\sharkIPConfigLastItem{ IP Addresses }{}{}{}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Certificate }{}{}{}
|
|
|
\sharkIPConfigItem { Enable }{checked}{}{}
|
|
|
\sharkIPConfigItem { Common Name }{sf-fw1.forksand.com}{}{}
|
|
|
\sharkIPConfigItem { Description }{\Gls{sharkfork} \Gls{firewall} 1}{}{}
|
|
|
\sharkIPConfigItem { Alt Names }{}{}{}
|
|
|
\sharkIPConfigItem { LE Account }{sf-fw1}{}{}
|
|
|
\sharkIPConfigItem { Validation Method }{sf-fw1-http}{}{}
|
|
|
\sharkIPConfigItem { Restart Actions }{}{}{}
|
|
|
\sharkIPConfigItem { Auto Renewal }{checked}{}{}
|
|
|
\sharkIPConfigLastItem{ Renewal Interval }{60}{}{}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Interfaces -\char`> Lan }{}{}{}
|
|
|
\sharkIPConfigItem { Enable }{checked}{}{}
|
|
|
\sharkIPConfigItem { Lock }{checked}{}{}
|
|
|
\sharkIPConfigItem { Description }{LAN}{}{}
|
|
|
\sharkIPConfigItem { IPv4 Configuration Type }{Static IPv4}{}{}
|
|
|
\sharkIPConfigLastItem{ IPv6 Configuration Type }{none}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
\begin{itemize}
|
|
|
\item Refer to System -\char`> Gateways -\char`> Single -\char`> WAN\char`_DHCP6
|
|
|
\item Set Disabled flag to checked
|
|
|
\item Press Apply changes
|
|
|
\item Modify LAN and WAN interfaces, disable IPv6 at both
|
|
|
\item Modify \Gls{firewall} Rules, disable IPv6
|
|
|
\item Add new rula to \Gls{firewall} Rules WAN
|
|
|
\end{itemize}
|
|
|
\begin{table}[!htb]
|
|
|
\caption{sf-fw OPNsense Dashboard \Gls{firewall} Rules} \label{tab:supermicroSSCIpmiOpnsenseLeaRules}
|
|
|
\begin{tabu}{|[2pt]p{\SIPCCwidth}|[2pt]p{\SIPCCwidth*2}|[2pt]}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\multicolumn {1}{|[2pt]l|[2pt]}{\rule[-0.7em]{0pt}{2em} \cellcolor{\currentColor}{Parameter}}&
|
|
|
\multicolumn {1}{l|[2pt]}{\cellcolor{\currentColor}{Value}} \\
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { Interfaces -\char`> WAN }{}{}{}
|
|
|
\sharkIPConfigItem { Enable }{checked}{}{}
|
|
|
\sharkIPConfigItem { Lock }{checked}{}{}
|
|
|
\sharkIPConfigItem { Description }{WAN}{}{}
|
|
|
\sharkIPConfigItem { IPv4 Configuration Type }{DHCP}{}{}
|
|
|
\sharkIPConfigLastItem{ IPv6 Configuration Type }{none}{}{}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { \Gls{firewall} -\char`> Settings -\char`> Advanced }{}{}{}
|
|
|
\sharkIPConfigLastItem{ Allow IPv6 }{unchecked}{}{}
|
|
|
\tabucline[2pt]{1-2}
|
|
|
\sharkIPConfigItem { \Gls{firewall} -\char`> Rules -\char`> WAN }{}{}{}
|
|
|
\sharkIPConfigItem { Action }{Pass}{}{}
|
|
|
\sharkIPConfigItem { Disabled }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Interface }{WAN}{}{}
|
|
|
\sharkIPConfigItem { TCP/IP Version }{IPv4}{}{}
|
|
|
\sharkIPConfigItem { Protocol }{TCP}{}{}
|
|
|
\sharkIPConfigItem { Source/Invert }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Source }{any}{}{}
|
|
|
\sharkIPConfigItem { Destination/Invert }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Destination }{This \Gls{firewall}}{}{}
|
|
|
\sharkIPConfigItem { Destination port range }{https to https}{}{}
|
|
|
\sharkIPConfigItem { Log }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Category }{}{}{}
|
|
|
\sharkIPConfigItem { Discription }{Enable https to \Gls{firewall}}{}{}
|
|
|
\sharkIPConfigItem { Source OS }{Any}{}{}
|
|
|
\sharkIPConfigItem { No XMLRPC Sync }{unchecked}{}{}
|
|
|
\sharkIPConfigItem { Shedule }{none}{}{}
|
|
|
\sharkIPConfigLastItem{ Gateway }{default}{}{}
|
|
|
\end{tabu}
|
|
|
\end{table}
|
|
|
|
|
|
\newpage
|
|
|
\section{Alternatives Hardware Overview}
|
|
|
Some resellers:
|
|
|
\begin{itemize}
|
|
|
\item \url{https://www.deciso.com/}
|
|
|
\item \url{https://www.pfwhardware.com/}
|
|
|
\item \url{https://www.osnet.eu/}
|
|
|
\end{itemize}
|
|
|
|
|
|
\begin{itemize}
|
|
|
\item (8) 1 gig ethernet ports
|
|
|
Connects to (1) 100M ethernet upstream fiber optic
|
|
|
Connects to (1) 100M ethernet upstream wifi
|
|
|
Various LAN
|
|
|
\item (Hot swap?) Dual Power Supplies
|
|
|
\item (How swap?) RAID (Linux md), with SSD storage.
|
|
|
\item 2.5'' drive bays
|
|
|
\item Total ~8GHz CPU
|
|
|
\item ~8-16 gigs RAM ? Depends on OS.
|
|
|
\item Two servers total, for standby/failover
|
|
|
\end{itemize}
|
|
|
|
