# this supports ulx3s

interface ft232r
#ft232r_device_desc "ulx3s"
ft232r_vid_pid 0x0403 0x6015
# ULX3S specific GPIO setting
ft232r_tck_num DSR
ft232r_tms_num DCD
ft232r_tdi_num RI
ft232r_tdo_num CTS
# trst/srst are not used but must have different values than above
ft232r_trst_num RTS
ft232r_srst_num DTR
# default speed
adapter_khz 1000

# JTAG TAPs - lfe5u12, lfe5u25, lfe5u45, lfe5u85
#jtag newtap lfe5u12 tap -expected-id 0x21111043 -irlen 8 -irmask 0xFF -ircapture 0x5
#jtag newtap lfe5u25 tap -expected-id 0x41111043 -irlen 8 -irmask 0xFF -ircapture 0x5
#jtag newtap lfe5u45 tap -expected-id 0x41112043 -irlen 8 -irmask 0xFF -ircapture 0x5


#
jtag newtap lfe5um85 tap -expected-id 0x41113043 -irlen 8 -irmask 0xFF -ircapture 0x5
#Error: tdo check error at line 51
#Error:     READ = 0x1113043
#Error:     WANT = 0x41113043
#Error:     MASK = 0xffffffff
#Error: fail to run command at line 12527
#Error: tdo check error at line 51
#Error:     READ = 0x1113043
#Error:     WANT = 0x41113043
#Error:     MASK = 0xffffffff



#
#jtag newtap lfe5um85 tap -expected-id 0x1113043 -irlen 8 -irmask 0xFF -ircapture 0x5
#Error: tdo check error at line 51
#Error:     READ = 0x1113043
#Error:     WANT = 0x41113043
#Error:     MASK = 0xffffffff
#Error: fail to run command at line 12527
#Error: tdo check error at line 51
#Error:     READ = 0x1113043
#Error:     WANT = 0x41113043
#Error:     MASK = 0xffffffff