Ultimate ECP5 Board. Fork Sand fork of https://github.com/daveshah1/TrellisBoard
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
Go to file
David Shah e078793157
hardware.mainboard: Fixes from PCB import
6 years ago
hardware hardware.mainboard: Fixes from PCB import 6 years ago
.gitmodules hardware: Add PKL as git submodule 6 years ago
README.md Update README with spec changes 6 years ago

README.md

Ultimate ECP5 Board

Key Features

  • Largest ECP5; LFE5UM5G-85F
  • PCIe 2.0 x2 card edge connector on two SERDES channels
  • Remaining two SERDES channels on SATA connectors
  • 1GByte x32 DDR3 chips
  • Dedicated HDMI output, probably using TFP410 serialiser
  • 1000BASE-T GbE connector with RGMII PHY
  • USB-A 2.0 host connector with ULPI PHY
  • 2nd USB-A connector directly connected to FPGA
  • FT2232H for debug JTAG and UART/FIFO with micro-B connector
  • PCIe or external 12V power input
  • 12 user LEDs, 4 user buttons, 8 user DIP switches
  • 128Mbit QSPI flash for boot and data
  • microSD card connector
  • Audio I/O with I2S codec
  • Dual PMOD connector
  • As many remaining IO as possible on high speed FFC connectors with a differential optimised pinout (4x 24 IO + ...). Selectable 1.8V/2.5V/3.3V

Layout

  • PCIe card form factor
  • At least Ethernet, USB-A, micro-USB debug and HDMI out
  • Other connectors probably would have to be on other sides. FFC connectors probably on top so they can loop over to another card to form a 2-slot card (e.g. with ADCs/DACs for SDR/DAQ)

Possible accessories using high-speed FFC connectors

  • MIPI DSI smartphone-style LCDs
  • MIPI CSI-2 cameras
  • High speed ADC/DAC
  • HDMI in/out, direct or using serialiser chip
  • LVDS video in/out for LCDs or block cameras
  • Breakout board to dual or triple PMOD