From c28b6c7126a507f0fd32f8646a74074c6922a612 Mon Sep 17 00:00:00 2001 From: Emard Date: Wed, 20 Sep 2017 13:17:37 +0200 Subject: [PATCH] readme update todo list --- README.md | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 1eda3c0..799fe97 100644 --- a/README.md +++ b/README.md @@ -61,7 +61,12 @@ section (thicker power lines, separately routed feedback) [ ] Silkscreen Double outline for BGA chip [ ] Do not write silkscreen over the pads + [ ] Silkscreen BGA names on ESP32 placeholder + [ ] Thinner copper, more spacing to SDRAM-FPGA + [ ] physically sprinkle VCC blocator capacitors under BGA [ ] Values on silkscreen + [ ] Dedicated antenna pin + [ ] onboard 433 antenna (lower side, remove GND infill) [x] Resistors for LEDs [x] Move USB LEDs from bottom to top side [ ] Improve SDRAM routing - use VIAs for closest pins @@ -77,13 +82,10 @@ section (thicker power lines, separately routed feedback) [ ] Move WiFi Disable jumper above the buttons [x] Sprinkle 2.2uF capacitors on power lines [ ] Spice simulation of power-up/shutdown network - [ ] Dedicated antenna pin - [ ] onboard 433 antenna [x] 27ohm D+/D- to FT231XS [x] DIP switch (4 switches) [x] MAX11123 ADC SPI [x] I2C for RTC - [ ] physically sprinkle VCC blocator capacitors [x] main usb connector on top side [ ] space screw to other parts [x] move battery away from screw hole