diff --git a/README.md b/README.md
index 112ab55..a3d3dbf 100644
--- a/README.md
+++ b/README.md
@@ -163,9 +163,6 @@ Test the prototype.
     [x] Reconnect WIFI_OFF so that jumper has priority
     [x] 25MHz oscillator: needs clearance from LEDs, move under USB1
     [x] connect SHUTDOWN to FPGA
-    [ ] ESP-32: GPIO12 at boot selects internal flash voltage,
-        it is connected to J1_27+ and wrong pullup/pulldown at boot
-        will prevent ESP32 from booting
     [x] ESP-32: won't boot when SD connected. Don't solder it at PCB v1.7
         It is routed differently in newer release
         Arduino->Examples->ESP32->SD_MMC_Test
@@ -200,6 +197,6 @@ Test the prototype.
     [ ] move GP7,GP8 from gpio bank0 to gpio bank7
     [x] route selected voltage to VCCio0/7
     [x] route selected voltage to J1 PMOD instead of 3.3V fixed
-    [ ] more bank0,1,7 decoupling capacitors
+    [x] more bank0,1,7 decoupling capacitors
     [x] Move Jumper 2.5V/3.3V deeper inside PCB (angled header)
     [x] Selected 2.5/3.3V to J1 header (instead fixed 3.3V)