Manual: better explained ESP-32 WiFi connection

pull/3/head
Emard 5 years ago
parent 52cd091217
commit f22eaf0d35

@ -254,11 +254,28 @@ Then upload the web page content to ESP-32 FLASH filesystem,
at websvf window click "Tools->ESP32 Sketch Data Upload".
successful upload will finish with same as above.
Connect to ESP-32 WiFi (it will either connect to your
local WiFi or become access point with
default ssid=websvf password=12345678).
ESP32 will try to connect to your local WiFi as client with
default ssid=websvf password=12345678
Insert SD card with file "ulx3s-wifi.conf" in SD root directory:
{
"host_name": "ulx3s",
"ssid": "ulx3s",
"password": "testpass",
"http_username": "user",
"http_password": "pass"
}
By editing this file you can set
ssid and password for connection
to your local WiFi access point.
If client connection is unsuccessful ESP-32 it will become
access point with the same ssid and password, but so far many people
reported unsuccessful connection attempts from PC to ESP-32 in AP mode.
If you want to try, AP mode ESP-32 web address is "http://192.168.4.1"
and internet should not to work in this case :).
In web browser open upload page "http://192.168.4.1".
If ESP-32 connected as a client, IP address will vary depending
on local network. Discover it by using WiFi access
point web interface, ARP, NMAP, or by sniffing it.

Loading…
Cancel
Save