80 Commits (5384b84706a674cfc82e8cf4282402f61ff7289e)

Author	SHA1	Message	Date
Emard	ac07b63744	footprint sdram pin pitch increased 0.8 mm -> 0.8077 mm ... Physical chips have total pin center spacing of 21 mm while at 0.8 mm pitch it would be 20.8 mm, 0.2 mm different at the side.	7 years ago
Emard	9fff92f938	footprint: SOA008 SPI flash, cypress version of SOIC-8 150mil	7 years ago
Emard	e7fc939612	footprint: I2C SM8 updated, pin1 marked rectangular others oval	7 years ago
Emard	53358189b8	footprint SOT96-1, updated with precise pads location and ... pad1 rectangular, other pads oval	7 years ago
Emard	05306dbed2	footprint SD card: proper rotation about exact 0,0 origin	7 years ago
Emard	3ea8206f48	Revert "footprint: SD card slot oriented according to physical tape and reel appearance." ... This reverts commit 8df4be2ab6. Origin of rotation wasn't properly set to 0,0	7 years ago
Emard	bae399b4ca	hdmi oriented according to tape and reel	7 years ago
Emard	8df4be2ab6	footprint: SD card slot oriented according to physical tape and reel appearance.	7 years ago
Emard	00e0f7da15	footprint audio jack dimensions and orientation adjusted ... according to datasheet. Center position not sure, tape and reel information not found.	7 years ago
Emard	55f4a44ee5	I2C SM8 footprint properly oriented from TI tape and reel datasheet	7 years ago
Emard	820064c65e	NXP RTC SOT96-1 package, same as SOIC-8 but oriented with pin 1 ... in upper left quadrant, according to NXP SOT96-1 tape and reel datasheet	7 years ago
Emard	afa3ace80b	esp-32 3D model	7 years ago
Emard	702be2aa9e	FPGA chip bank 0: swap sides A9<->B10 (true-complement was wrong)	7 years ago
Emard	35b3a8b3dd	changing to 45F which is production device now ... schem symbol 45F fixed typo T8->T7 (GND) and SERDES	7 years ago
Emard	ba4c8e8d22	PCB v1.6 SDRAM fully reworked	7 years ago
davor	9d8be27731	logo "HRVATSKI PROIZVOD" enlarged and moved towards audio connector	7 years ago
davor	220f575442	schematic "power" sheet and footprint cosmetics	7 years ago
davor	1ea88bda53	Adding pins to schematic symbols for all chips in unit "H" (SERDES) ... Non-serdes chips need GND connection on unit "H". "power" sheet now connects GND's at unit "H".	7 years ago
davor	8f452e4d43	filling up serdes block 50,51 for UM85F, halway done. ... VCC are also planned to be moved to that block	7 years ago
davor	fffde2cf88	Additional GND for 85F chips	7 years ago
davor	6c23919a2d	Schematic symbol for 12F. Currently just a copy of 25F ... and checked bank0 pinout, and randomly power bank seems to fit at first glance.	7 years ago
davor	e4fc99887e	moving GND and VCC on schematics symbols to ... common locations for planned PCB which supports upgrade path for example 12F->25F->45F->85F and if possible ECP5U->ECP5UM	7 years ago
Emard	151cf46186	added missing jumper footprint	7 years ago
davor	77b35c7bd2	battery, remove silkscreen printing from the pad ... and other small silkscreen updates	7 years ago
Emard	b6f388d228	ESP-32S footprint changed to avoid ... silkscreen writing over the pads, small cosmetics around	7 years ago
Emard	cf8da0d984	Logos EMARD, RADIONA, RIZ, FER, HRVATSKI PROIZVOD ... Gerbers update	7 years ago
Emard	a913ffb675	Micro SD outline moved to correct layer (b.mask->f.fab)	7 years ago
Emard	ae1aee7f5e	Micro SD contacts were OK for SCHD3A100. ... Readme update. Silkscreen outline drawn.	7 years ago
davor	52c02d540c	Footprint ALPS SCHD3A0100 (obsolete but traditionally good)	7 years ago
davor	cb69b2cc9a	ECP5 85E schematic footprint	7 years ago
davor	3aac13deb4	footprint for ECP5: ... fix 25E device, small pin naming swapping BANK0 one pin A/B new 45E device, modified pin names to fit (needs more review) new 85E device but pin names are wrong (need more work)	7 years ago
davor	732323094c	BGA footprint: silkscreen ticks for verification ... of relative alignment between BGA silkscreen and the pads	7 years ago
Emard	d463d17f18	32768Hz crystal ABS25 footprint now correct	7 years ago
davor	eaf4c2402a	Fab layer, moving values to avoid overlap writings ... GPDI footprint edited to remove some unneeded lines Gerbers update	7 years ago
davor	5a2eb8220f	silkscreen on top layer: avoiding writing on solder pads	7 years ago
Emard	e15ab7d84f	removing battery circle from the sikscreen ... (changing footprint)	7 years ago
Emard	7569433437	removing OLED outline from the silkscreen ... (footprint changed)	7 years ago
davor	6b9a07a7ab	BGA footprint with double squares for manual alignment	7 years ago
davor	ee20b46f6d	connecting ADC substrate pad to GND	7 years ago
davor	2153a220a0	schematic symbol for ADC MAX11123 ... small PCB traces cleanup ADC chip placed on PCB but connected only to GND	7 years ago
davor	eb3fc2ec70	connecting some GNDs and GNDing unnamed shield pads on USB connectors	8 years ago
Davor	a4b74230d3	fixing errors in schem symbol BANK6	8 years ago
Davor	af58a36fbd	delete old FPGA schem. symbol component from the library	8 years ago
Davor	e5f97e1897	schematic symbol FPGA: mark bank physical location ... on the floorplan	8 years ago
davor	4a26254f9a	correcting schematic symbol of FPGA	8 years ago
davor	01d1cad2ec	add missing pins in schematic symbol for BANK3	8 years ago
Davor	d0791b1e47	correcting few pin numbering errors in FPGA schematic symbols	8 years ago
Davor	40aef19979	FPGA schematic symbol add mssing PR41A, PR41B to BANK3	8 years ago
davor	75e4f9b564	correct footprint for crystal oscillator 25 MHz	8 years ago
davor	9570c1137b	small edits	8 years ago