454 Commits (88f951525fb433df6a85b9162931cc2024153687)

Author SHA1 Message Date
davor f1f0d7ade2 PCB: "inam" logo update
7 years ago
davor 7bdb1880da PCB: larger FER logo (4.6 mm height)
7 years ago
Emard 46ee5bcf86 PCB: KONCAR logo
7 years ago
Emard de076784b4 PCB: update for USB footprint
7 years ago
Emard 0ad4f5d633 PCB v1.8.10
7 years ago
Emard c89e08b31c PCB: revert USB default footprint
7 years ago
davor a1e758b705 PCB: flash chip use combo 150/208 mil footprint
7 years ago
davor 49bf3b64cc PCB: silkscreen cosmetics, moving texts around for visibility
7 years ago
davor 0671e14733 PCB: spacing RV2 RV3 away from 2.54 mm thru-holes
7 years ago
davor d5ec90d78f PCB: separate RV2 RV3 for soldermask to enter inbetween
7 years ago
davor 8f4e6ffc42 PCB: Q1, Q2 non-handsoldering footprint
7 years ago
davor d0275f9cef PCB: USB diodes and jumpers with smaller (non-handsoldering) pads
7 years ago
davor a38926d559 PCB: moving C1, C21, C50 away from J1, J2 connectors
7 years ago
davor 2e357a510c PCB: 3D model of IDC 2.54mm headers
7 years ago
Emard ea89e1c3d9 PCB: battery holder 3D model in place
7 years ago
davor 9196448978 PCB: 3D models for HDMI and audio jack
7 years ago
davor 383913bf97 PCB: trac cosmetix
7 years ago
davor e13cab6d5f PCB: moving US2 VIAs from under the footprint to the front of solder pads.
7 years ago
davor be3ef7a678 PCB v1.8.9
7 years ago
davor 78e398513c PCB: track cosmetix around US2 and copper pour
7 years ago
davor 46709c1772 PCB: 3D view replaced didoes with 0-ohm resistors
7 years ago
davor 00ed12e81d PCB v1.8.8
7 years ago
Emard 9a1ce975d9 PCB v1.8.7: SD card rotated 180 deg
7 years ago
Emard 5263a5dff5 PCB: unclutter silkscreen
7 years ago
davor e452e7a4aa PCB: don't output fabrication layers, they don't look good.
7 years ago
davor 0938c3045e PCB: silkscreen cosmetix around RTC
7 years ago
davor fe37b87904 PCB v1.8.6: fixing RTC time loss issue with RC network
7 years ago
davor 02f9aad964 PCB: v1.8.5
7 years ago
davor 0621a2dc9c PCB: DIP Switch pulled up by 2.5/3.3V line, not fixed 3.3V
7 years ago
davor 4fd3073327 PCB: GPDI1 was missing from fabrication output (attribute now set to "Surface mount")
7 years ago
davor 581f70b0e1 PCB: U2 was missing from fabrication output (attribute now set to "Surface mount")
7 years ago
davor 7e8f9fff2e PCB: Remove R56 RV2 RV3 from fabrication output list (footprint attribute set to "Virtual")
7 years ago
davor db2a1e6d41 PCB: v1.8.4
7 years ago
davor d852596b60 PCB: joining differential track which had separated
7 years ago
davor 73fe099a7c PCB: move 5V track bit away from the edge
7 years ago
davor 7357e8d9a2 PCB: join differential tracks that had separated
7 years ago
davor 268a9fad91 PCB: trac cosmetix around GPDI GND
7 years ago
davor 8727e4feed PCB: redundand routing for buttons
7 years ago
davor 19ebc2bfe1 PCB: trac cosmetix around SDRAM
7 years ago
davor 85c17afe89 PCB: new inductors footprint and trac cosmetix around them
7 years ago
davor ea933eefe7 PCB: remove 3D models from resistors which should not be soldered
7 years ago
davor 8f751545b2 PCB: reloaded with new U11 i2c schematic symbol
7 years ago
davor f3701f7f3e PCB: J2 silkscreen labels
7 years ago
davor 40e7ad7400 PCB: v1.8.3
7 years ago
davor a6d1e66dea PCB: unclutter silkscreen and trac cosmetix
7 years ago
davor cd2c041273 PCB: resistor footprints changed, unclutter silkscreen again
7 years ago
davor 7592c8a448 PCB: unclutter silkscreen (mostly done)
7 years ago
Emard 81e30ee0f2 PCB: unclutter silkscreen (partially done)
7 years ago
davor e51217fa05 PCB: audio DAC resistors moved closer to each other
7 years ago
davor a3cbf3e2cc PCB: re-run DRC
7 years ago