include /* [STL element to export] */ //Coque haut - Top shell TShell = 1;// [0:No, 1:Yes] //Coque bas- Bottom shell BShell = 1;// [0:No, 1:Yes] //Panneau arrière - Rear panel BPanel = 1;// [0:No, 1:Yes] //Panneau avant - Front panel FPanel = 1;// [0:No, 1:Yes] // Font color: at height 2.7: M600; change filament // button pins Pins = 1; // button pins //Texte façade - Front text Text = 1;// [0:No, 1:Yes] // multicolor front panel /* ;BEFORE_LAYER_CHANGE ;2.7 M600 ; Pause print to change filament */ /*////////////////////////////////////////////////////////////////// - mjesečno po svojem parkir FB Aka Heartman/Hearty 2016 - - http://heartygfx.blogspot.com - - OpenScad Parametric Box - - CC BY-NC 3.0 License - //////////////////////////////////////////////////////////////////// 12/02/2016 - Fixed minor bug 28/02/2016 - Added holes ventilation option 09/03/2016 - Added PCB feet support, fixed the shell artefact on export mode. */////////////////////////// - Info - ////////////////////////////// // All coordinates are starting as integrated circuit pins. // From the top view : // CoordD <--- CoordC // ^ // ^ // ^ // CoordA ---> CoordB //////////////////////////////////////////////////////////////////// ////////// - Paramètres de la boite - Box parameters - ///////////// /* [PCB_Feet--TheBoard_Will_NotBeExported) ] */ //All dimensions are from the center foot axis // - Coin bas gauche - Low left corner X position PCBPosX = 0; // - Coin bas gauche - Low left corner Y position PCBPosY = 0; // - Longueur PCB - PCB Length PCBLength = 30*2.54; // - Largeur PCB - PCB Width PCBWidth = 17*2.54; // Thickness of PCB PCBThick = 1.8; // - Heuteur pied - Feet height FootHeight = 7; // - Diamètre pied - Foot diameter FootDia = 6; // - Diamètre trou - Hole diameter FootHole = 1.8; // - 3-foot mode, one foot width-asymmetric, 0 for normal 4-foot mode Foot3Width = 0*2.54; // those clearances should be larger than // the PCB edge to hole centers distances FootClrX = 10; // foot center to panel clearance 25 for DB-9, 10 for tight FootClrY = 10-3; // foot center to shell wall clearance FootmvY = 3; // move foot out of center y direction // - Epaisseur - Wall thickness Thick = 2;//[2:5] /* [Box dimensions] */ // - Longueur - Length Length = PCBLength+2*(2*Thick+FootClrX); // - Largeur - Width Width = PCBWidth+2*(Thick+FootClrY); // - Hauteur - Height Height = 26; /* [Box options] */ // Pieds PCB - PCB feet (x4) PCBFeet = 1;// [0:No, 1:Yes] // - Decorations to ventilation holes Vent = 0;// [0:No, 1:Yes] // - Decoration-Holes width (in mm) Vent_width = 1.5; // - Text you want txt = "ULX3S"; // - Font size TxtSize = 6; // - Font Police ="Arial Black"; // - Diamètre Coin arrondi - Filet diameter Filet = 2;//[0.1:12] // - lissage de l'arrondi - Filet smoothness Resolution = 20;//[1:100] // - Tolérance - Tolerance (Panel/rails gap) m = 0.8; mz = 1.5; // panels height tolerance // mounting legs clearance MountClearance = 0.1; // clearance between Top and Bottom shell ShellClearance = 0.0; // mounting hole diameters MountOuterHole = 2.5; MountInnerHole = 1.8; // fixation leg size MountLegSize = 0; // 10 // fixation hole z-position from center MountHolePos = 2.5; // distance of leg to the edge MountLegEdge = 0*MountLegSize; /* [Hidden] */ // - Couleur coque - Shell color Couleur1 = "Orange"; // - Couleur panneaux - Panels color Couleur2 = "OrangeRed"; // Thick X 2 - making decorations thicker if it is a vent to make sure they go through shell Dec_Thick = Vent ? Thick*2 : Thick; // - Depth decoration Dec_size = Vent ? Thick*2 : 0.8; //////////////////// Oversize PCB limitation -Actually disabled - //////////////////// //PCBL= PCBLength+PCBPosX>Length-(Thick*2+7) ? Length-(Thick*3+20+PCBPosX) : PCBLength; //PCBW= PCBWidth+PCBPosY>Width-(Thick*2+10) ? Width-(Thick*2+12+PCBPosY) : PCBWidth; PCBL=PCBLength; PCBW=PCBWidth; //echo (" PCBWidth = ",PCBW); ///////////////////////////////////// - Main - /////////////////////////////////////// // mounting hole xy-position Footx = 2*Thick+FootClrX; Footy = Thick+FootClrY+FootmvY; Fh = 17.5; // top feet height // foot xy positions Fxy = [ [Footx, Footy, 0], [Footx+PCBLength, Footy, 0], [Footx, Footy+PCBWidth, 0], [Footx+PCBLength, Footy+PCBWidth, 0] ]; module connector_cut() { // mounting hole x-position //footx = 2*Thick+FootClrX; //footy = Thick+FootClrY; cy = 60-8; translate([Footx,Footy,0]) { // cut off for WiFi translate([24-10,-10,6]) cube([21,3,3],center=true); // cut off for HDMI translate([42.3,cy,12]) cube([22,10,13],center=true); // cut off for AUDIO translate([21.47,cy,11]) rotate([90,0,0]) cylinder(d=13.5,h=10,$fn=32,center=true); // cut off for 2.5/3.3V jumper translate([27.07+2.54,cy,11]) cube([13,10,7],center=true); // cut off for USB1 translate([8.89,cy,9.5]) cube([13,10,9],center=true); // cut off for USB2 translate([67.31,cy,9.5]) cube([13,10,9],center=true); } } // xyz positions of all buttons // relative to feet button_pos = [ [68.58,34.29,0], // btn0 [2.54,19.05,0], // btn1 [13.97,19.05,0], // btn2 [57.15,8.89,0], // btn3 [57.15,0,0], // btn4 [45.72,0,0], // btn5 [68.58,0,0] // btn6 ]; // addition to top shell - button tubes module top_add() { // mounting hole xy-position //footx = 2*Thick+FootClrX; //footy = Thick+FootClrY; tube_h=Height/2-3; tube_od=9; // tube outer diameter translate([Footx,Footy,Height-tube_h/2]) { // btn hole for(i = [0:6]) translate(button_pos[i]) cylinder(d=tube_od,h=tube_h,$fn=12,center=true); } for(i = [0:3]) { translate([0,0,Height-Fh/2]) translate(Fxy[i]) { cylinder(d=6,h=Fh,$fn=12,center=true); // small in-hole centering cylinders translate([0,0,-Fh/2-(PCBThick-0.1-0.001)]) cylinder(d=3,h=PCBThick-0.1,$fn=32); } } } module button_pins() { pin_d1=6; // top dia pin_h=Height/2+2; // total height pin_d2=8; // button touch dia pin_h2=2; // button touch h //footx = 2*Thick+FootClrX; //footy = Thick+FootClrY; translate([Footx,Footy,Height/2+0.5]) for(i = [0:6]) translate(button_pos[i]) union() { cylinder(d=pin_d1,h=pin_h,$fn=32); cylinder(d=pin_d2,h=pin_h2,$fn=32); } } module top_cut() { // mounting hole xy-position //footx = 2*Thick+FootClrX; //footy = Thick+FootClrY; tube_h=Height/2-3; tube_id=7; // button tube inner diameter translate([Footx,Footy,Height]) { // 8-led view slit translate([8.89,28.81,0]) cube([20,4,10],center=true); // 3-led view slit translate([27.94,2.54,0]) cube([10,4,10],center=true); // display (screen) if(1) translate([PCBLength/2-1,PCBWidth/2,0]) cube([23,16,10],center=true); // display socket if(0) translate([PCBLength/2,8.5,0]) cube([20,4,10],center=true); // btn hole translate([0,0,-tube_h/2]) for(i = [0:6]) translate(button_pos[i]) cylinder(d=tube_id,h=tube_h+1,$fn=12,center=true); } // screw holes on top legs screwhole_h=10; // depth of the screw hole for(i=[0:3]) translate([0,0,Height-Fh/2]) translate(Fxy[i]) translate([0,0,-screwhole_h/2-PCBThick]) cylinder(d=1.8,h=screwhole_h,$fn=6,center=true); } BFclr = 0.5; // bottom feet clearance // add bottom custom feet module bottom_add() { bfh=Height-Fh-PCBThick-BFclr; // bottom feet height for(i=[0:3]) translate(Fxy[i]) cylinder(d=6.5,h=bfh,$fn=12,center=false); } // cut holes in bottom feet module bottom_cut() { transition=2; bfhole=Height-Fh-PCBThick-BFclr-(Thick+transition/2); for(i=[0:3]) translate([0,0,-0.01]) translate(Fxy[i]) union() { cylinder(d=1.8,h=Height,$fn=12,center=false); // conical transition translate([0,0,bfhole-0.01]) cylinder(d1=5,d2=1.8,h=transition+0.02,$fn=12,center=false); // screw head hole cylinder(d=5,h=bfhole,$fn=12,center=false); } // cut rails for PCB if(1) translate((Fxy[0]+Fxy[3])/2+[0,0,Height/2+(Height-Fh-PCBThick-BFclr)]) cube([99,51.15,Height],center=true); } if(BPanel==1) //Back Panel translate ([-m/2,0,0]){ difference() { union() { Panels(); // screw extenders for(i=[-1:2:1]) translate([Thick*1.5*0+m,25.4/2*i+Width/2,Height/2]) rotate([0,90,0]) cylinder(d=4,h=Thick*2,$fn=32,center=true); } if(1) { // cut off opening for DB-9 connector translate([Thick*1.5+m,Width/2,Height/2]) cube([Thick*2,19,10],center=true); // cut off screw holes for(i=[-1:2:1]) translate([Thick*1.5+m-1.9,25.4/2*i+Width/2,Height/2]) rotate([0,90,0]) cylinder(d=1.8,h=6,$fn=12,center=true); } } } if(FPanel==1) { //Front Panel rotate([0,0,180]) translate([-Length-m/2,-Width,0]) Panels(); if(Text==1) // Front text color(Couleur1) { translate([ Length-(Thick)-m/2, Width/2, Height/2]) {// x,y,z rotate([90,0,90]){ linear_extrude(height = 1.0){ text(txt, font = Police, size = TxtSize, valign ="center", halign ="center"); } } } } } if(BShell==1) // Coque bas - Bottom shell color(Couleur1){ difference() { union() { Coque(top=0); bottom_add(); } connector_cut(); bottom_cut(); } if(0) if (PCBFeet==1) // Feet { footx = 2*Thick+FootClrX; footy = Thick+FootClrY; difference() { union() { translate([PCBPosX,PCBPosY,0]) Feet(); // add centering cylinder for 3.2 mm hole if(0) for(i=[0:1]) for(j=[0:1]) translate([footx+i*PCBLength,footy+j*PCBWidth,FootHeight-Thick+1.5]) cylinder(d=3,h=1.5,$fn=32); } // drill holes 1.8 mm for screws for(i=[0:1]) for(j=[0:1]) translate([footx+i*PCBLength,footy+j*PCBWidth,FootHeight-Thick+1.5-4]) cylinder(d=2.5,h=Height,$fn=32); } } } if(TShell==1) // Coque haut - Top Shell color( Couleur1,1){ difference() { union() { translate([Length,0,Height+ShellClearance]) rotate([0,180,0]) Coque(top=1); top_add(); } connector_cut(); top_cut(); } } if(Pins==1) button_pins();