You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
411 lines
15 KiB
411 lines
15 KiB
/*//////////////////////////////////////////////////////////////////
|
|
- FB Aka Heartman/Hearty 2016 -
|
|
- http://heartygfx.blogspot.com -
|
|
- OpenScad Parametric Box -
|
|
- CC BY-NC 3.0 License -
|
|
////////////////////////////////////////////////////////////////////
|
|
12/02/2016 - Fixed minor bug
|
|
28/02/2016 - Added holes ventilation option
|
|
09/03/2016 - Added PCB feet support, fixed the shell artefact on export mode.
|
|
25/01/2018 - emard: separate upbox file to be included and customization
|
|
|
|
*/////////////////////////// - Info - //////////////////////////////
|
|
|
|
// All coordinates are starting as integrated circuit pins.
|
|
// From the top view :
|
|
|
|
// CoordD <--- CoordC
|
|
// ^
|
|
// ^
|
|
// ^
|
|
// CoordA ---> CoordB
|
|
|
|
|
|
////////////////////////////////////////////////////////////////////
|
|
|
|
|
|
////////// - Paramètres de la boite - Box parameters - /////////////
|
|
|
|
/* [PCB_Feet--TheBoard_Will_NotBeExported) ] */
|
|
//All dimensions are from the center foot axis
|
|
// - Coin bas gauche - Low left corner X position
|
|
//PCBPosX = 0;
|
|
// - Coin bas gauche - Low left corner Y position
|
|
//PCBPosY = 0;
|
|
// - Longueur PCB - PCB Length
|
|
//PCBLength = 15*2.54;
|
|
// - Largeur PCB - PCB Width
|
|
//PCBWidth = 18*2.54;
|
|
// - Heuteur pied - Feet height
|
|
//FootHeight = 6;
|
|
// - Diamètre pied - Foot diameter
|
|
//FootDia = 7;
|
|
// - Diamètre trou - Hole diameter
|
|
//FootHole = 1.8;
|
|
// - 3-foot mode, one foot width-asymmetric, 0 for normal 4-foot mode
|
|
//Foot3Width = 0;
|
|
|
|
// those clearances should be larger than
|
|
// the PCB edge to hole centers distances
|
|
//FootClrX = 7; // foot center to panel clearance
|
|
//FootClrY = 6; // foot center to shell wall clearance
|
|
|
|
// - Epaisseur - Wall thickness
|
|
//Thick = 2;//[2:5]
|
|
|
|
|
|
/* [Box dimensions] */
|
|
// - Longueur - Length
|
|
// Length = PCBLength+2*(2*Thick+FootClrX);
|
|
// - Largeur - Width
|
|
// Width = PCBWidth+2*(Thick+FootClrY);
|
|
// - Hauteur - Height
|
|
// Height = 29;
|
|
|
|
/* [Box options] */
|
|
// Pieds PCB - PCB feet (x4)
|
|
// PCBFeet = 1;// [0:No, 1:Yes]
|
|
// - Decorations to ventilation holes
|
|
// Vent = 0;// [0:No, 1:Yes]
|
|
// - Decoration-Holes width (in mm)
|
|
// Vent_width = 1.5;
|
|
// - Text you want
|
|
// txt = "Name";
|
|
// - Font size
|
|
// TxtSize = 5;
|
|
// - Font
|
|
// Police ="Arial Black";
|
|
// - Diamètre Coin arrondi - Filet diameter
|
|
// Filet = 2;//[0.1:12]
|
|
// - lissage de l'arrondi - Filet smoothness
|
|
// Resolution = 20;//[1:100]
|
|
// - Tolérance - Tolerance (Panel/rails gap)
|
|
// m = 1.5;
|
|
// mounting legs clearance
|
|
// MountClearance = 0.1;
|
|
// clearance between Top and Bottom shell
|
|
// ShellClearance = 0.1;
|
|
|
|
|
|
// mounting hole diameters
|
|
//MountOuterHole = 2.5;
|
|
//MountInnerHole = 1.8;
|
|
|
|
// fixation leg size
|
|
//MountLegSize = 16;
|
|
// fixation hole position from center
|
|
//MountHolePos = 2.5;
|
|
|
|
|
|
|
|
|
|
/* [Hidden] */
|
|
// - Couleur coque - Shell color
|
|
//Couleur1 = "Orange";
|
|
// - Couleur panneaux - Panels color
|
|
//Couleur2 = "OrangeRed";
|
|
// Thick X 2 - making decorations thicker if it is a vent to make sure they go through shell
|
|
//Dec_Thick = Vent ? Thick*2 : Thick;
|
|
// - Depth decoration
|
|
//Dec_size = Vent ? Thick*2 : 0.8;
|
|
|
|
//////////////////// Oversize PCB limitation -Actually disabled - ////////////////////
|
|
//PCBL= PCBLength+PCBPosX>Length-(Thick*2+7) ? Length-(Thick*3+20+PCBPosX) : PCBLength;
|
|
//PCBW= PCBWidth+PCBPosY>Width-(Thick*2+10) ? Width-(Thick*2+12+PCBPosY) : PCBWidth;
|
|
//PCBL=PCBLength;
|
|
//PCBW=PCBWidth;
|
|
//echo (" PCBWidth = ",PCBW);
|
|
|
|
|
|
|
|
/////////// - Boitier générique bord arrondis - Generic Fileted box - //////////
|
|
|
|
module RoundBox($a=Length, $b=Width, $c=Height){// Cube bords arrondis
|
|
$fn=Resolution;
|
|
translate([0,Filet,Filet]){
|
|
minkowski (){
|
|
cube ([$a-(Length/2),$b-(2*Filet),$c-(2*Filet)], center = false);
|
|
rotate([0,90,0]){
|
|
cylinder(r=Filet,h=Length/2, center = false);
|
|
}
|
|
}
|
|
}
|
|
}// End of RoundBox Module
|
|
|
|
|
|
////////////////////////////////// - Module Coque/Shell - //////////////////////////////////
|
|
|
|
module Coque(top=0){//Coque - Shell
|
|
Thick = Thick*2;
|
|
difference(){
|
|
difference(){//sides decoration
|
|
union(){
|
|
difference() {//soustraction de la forme centrale - Substraction Fileted box
|
|
|
|
difference(){//soustraction cube median - Median cube slicer
|
|
union() {//union
|
|
difference(){//Coque
|
|
RoundBox();
|
|
translate([Thick/2,Thick/2,Thick/2]){
|
|
RoundBox($a=Length-Thick, $b=Width-Thick, $c=Height-Thick);
|
|
}
|
|
}//Fin diff Coque
|
|
difference(){//largeur Rails
|
|
translate([Thick+m,Thick/2,Thick/2]){// Rails
|
|
RoundBox($a=Length-((2*Thick)+(2*m)), $b=Width-Thick, $c=Height-(Thick*2));
|
|
}//fin Rails
|
|
translate([((Thick+m/2)*1.55),Thick/2,Thick/2+0.1]){ // +0.1 added to avoid the artefact
|
|
RoundBox($a=Length-((Thick*3)+2*m), $b=Width-Thick, $c=Height-Thick);
|
|
}
|
|
}//Fin largeur Rails
|
|
}//Fin union
|
|
translate([-Thick,-Thick,Height/2]){// Cube à soustraire
|
|
cube ([Length+100, Width+100, Height], center=false);
|
|
}
|
|
}//fin soustraction cube median - End Median cube slicer
|
|
translate([-Thick/2,Thick,Thick]){// Forme de soustraction centrale
|
|
RoundBox($a=Length+Thick, $b=Width-Thick*2, $c=Height-Thick);
|
|
}
|
|
}
|
|
|
|
if(top < 0.5)
|
|
for(i = [0:1])
|
|
difference(){// Fixation box legs
|
|
union(){
|
|
translate([i*(Length-6*Thick-2*MountLegEdge)+3*Thick+MountLegEdge,Thick,Height/2]){
|
|
rotate([90,0,0]){
|
|
$fn=6;
|
|
cylinder(d=MountLegSize,Thick/2);
|
|
}
|
|
}
|
|
|
|
|
|
translate([i*(Length-6*Thick-2*MountLegEdge)+3*Thick+MountLegEdge,Width-Thick,Height/2]){
|
|
rotate([-90,0,0]){
|
|
$fn=6;
|
|
cylinder(d=MountLegSize,Thick/2);
|
|
}
|
|
}
|
|
|
|
}
|
|
// angular cut 45 deg
|
|
translate([4,Thick+Filet,Height/2-57]){
|
|
rotate([45,0,0]){
|
|
cube([Length,40,40]);
|
|
}
|
|
}
|
|
// angular cut 45 deg
|
|
translate([4,Width-(Thick+Filet),Height/2-57]){
|
|
rotate([45,0,0]){
|
|
cube([Length,40,40]);
|
|
}
|
|
}
|
|
// clearance cut
|
|
translate([0,-(Thick*1.5-MountClearance),Height/2]){
|
|
cube([Length,Thick*2,10]);
|
|
}
|
|
// clearance cut
|
|
translate([0,Width-Thick*2+(Thick*1.5-MountClearance),Height/2]){
|
|
rotate([0,0,0])
|
|
cube([Length,Thick*2,10]);
|
|
}
|
|
} //Fin fixation box legs
|
|
}
|
|
|
|
union(){// outbox sides decorations
|
|
//if(Thick==1){Thick=2;
|
|
for(i=[0:Thick:Length/4]){
|
|
|
|
// Ventilation holes part code submitted by Ettie - Thanks ;)
|
|
translate([10+i,-Dec_Thick+Dec_size,1]){
|
|
cube([Vent_width,Dec_Thick,Height/4]);
|
|
}
|
|
translate([(Length-10) - i,-Dec_Thick+Dec_size,1]){
|
|
cube([Vent_width,Dec_Thick,Height/4]);
|
|
}
|
|
translate([(Length-10) - i,Width-Dec_size,1]){
|
|
cube([Vent_width,Dec_Thick,Height/4]);
|
|
}
|
|
translate([10+i,Width-Dec_size,1]){
|
|
cube([Vent_width,Dec_Thick,Height/4]);
|
|
}
|
|
|
|
|
|
}// fin de for
|
|
// }
|
|
}//fin union decoration
|
|
}//fin difference decoration
|
|
|
|
if(MountLegSize > 0.001)
|
|
if(top < 0.5)
|
|
for(i = [0:1])
|
|
union(){ //sides inner holes
|
|
$fn=20;
|
|
translate([i*(Length - 6*Thick-2*MountLegEdge) + 3*Thick+MountLegEdge,20,Height/2+MountHolePos]){
|
|
rotate([90,0,0]){
|
|
cylinder(d=MountInnerHole,20);
|
|
}
|
|
}
|
|
translate([i*(Length - 6*Thick-2*MountLegEdge) + 3*Thick+MountLegEdge,Width-20,Height/2+MountHolePos]){
|
|
rotate([-90,0,0]){
|
|
cylinder(d=MountInnerHole,20);
|
|
}
|
|
}
|
|
}
|
|
if(MountLegSize > 0.001)
|
|
if(top > 0.5)
|
|
for(i = [0:1])
|
|
union() // sides outer holes
|
|
{
|
|
$fn=20;
|
|
translate([i*(Length - 6*Thick-2*MountLegEdge) + 3*Thick+MountLegEdge,5,Height/2-MountHolePos+ShellClearance]){
|
|
rotate([90,0,0]){
|
|
cylinder(d=MountOuterHole,20);
|
|
}
|
|
}
|
|
translate([i*(Length - 6*Thick-2*MountLegEdge) + 3*Thick+MountLegEdge,Width+5,Height/2-MountHolePos+ShellClearance]){
|
|
rotate([90,0,0]){
|
|
cylinder(d=MountOuterHole,20);
|
|
}
|
|
}
|
|
}//fin de sides holes
|
|
|
|
}//fin de difference holes
|
|
}// fin coque
|
|
|
|
////////////////////////////// - Experiment - ///////////////////////////////////////////
|
|
|
|
|
|
///////////////////////////////// - Module Front/Back Panels - //////////////////////////
|
|
|
|
module Panels(){//Panels
|
|
color(Couleur2){
|
|
translate([Thick+m,m/2,mz/2]){
|
|
difference(){
|
|
translate([0,Thick,Thick]){
|
|
RoundBox(Length,Width-((Thick*2)+m),Height-((Thick*2)+mz));}
|
|
translate([Thick,-5,0]){
|
|
cube([Length,Width+10,Height]);}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/////////////////////// - Foot with base filet - /////////////////////////////
|
|
module foot(FootDia,FootHole,FootHeight){
|
|
Filet=2;
|
|
color("Orange")
|
|
translate([0,0,Filet-1.5])
|
|
difference(){
|
|
|
|
difference(){
|
|
//translate ([0,0,-Thick]){
|
|
cylinder(d=FootDia+Filet,FootHeight-Thick, $fn=100);
|
|
//}
|
|
rotate_extrude($fn=100){
|
|
translate([(FootDia+Filet*2)/2,Filet,0]){
|
|
minkowski(){
|
|
square(10);
|
|
circle(Filet, $fn=100);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
cylinder(d=FootHole,FootHeight+1, $fn=100);
|
|
}
|
|
}// Fin module foot
|
|
|
|
module Feet(){
|
|
//////////////////// - PCB only visible in the preview mode - /////////////////////
|
|
translate([2*Thick+2,Thick+5,FootHeight+(Thick/2)-0.5]){
|
|
|
|
if(0)
|
|
{
|
|
%square ([PCBL+10,PCBW+10]);
|
|
translate([PCBL/2,PCBW/2,0.5]){
|
|
color("Olive")
|
|
%text("PCB", halign="center", valign="center", font="Arial black");
|
|
}
|
|
} // Fin PCB
|
|
}
|
|
|
|
////////////////////////////// - 4 Feet - //////////////////////////////////////////
|
|
translate([2*Thick+FootClrX,Thick+FootClrY,Thick/2]){
|
|
foot(FootDia,FootHole,FootHeight);
|
|
}
|
|
translate([2*Thick+FootClrX,(Thick)+PCBW+FootClrY,Thick/2]){
|
|
foot(FootDia,FootHole,FootHeight);
|
|
}
|
|
|
|
if(Foot3Width < 0.001)
|
|
{
|
|
// 4-foot mode
|
|
translate([(2*Thick)+PCBL+FootClrX,(Thick)+PCBW+FootClrY,Thick/2]){
|
|
foot(FootDia,FootHole,FootHeight);
|
|
}
|
|
translate([(2*Thick)+PCBL+FootClrX,Thick+FootClrY,Thick/2]){
|
|
foot(FootDia,FootHole,FootHeight);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
// 3-foot mode
|
|
translate([(2*Thick)+PCBL+FootClrX,(Thick)+Foot3Width+FootClrY,Thick/2]){
|
|
foot(FootDia,FootHole,FootHeight);
|
|
}
|
|
}
|
|
} // Fin du module Feet
|
|
|
|
|
|
///////////////////////////////////// - Main - ///////////////////////////////////////
|
|
|
|
module rear_panel()
|
|
{
|
|
translate([-m/2,0,0])
|
|
Panels();
|
|
}
|
|
|
|
module front_panel()
|
|
{
|
|
rotate([0,0,180])
|
|
translate([-Length-m/2,-Width,0])
|
|
Panels();
|
|
|
|
if(Text==1)
|
|
// Front text
|
|
color(Couleur1){
|
|
translate([Length-(Thick)-m/2,Width/2+Thick*0,(Height/2-(-Thick-m/2+(TxtSize/2)))]){// x,y,z
|
|
rotate([90,0,90]){
|
|
linear_extrude(height = 1.0){
|
|
text(txt, font = Police, size = TxtSize, valign ="center", halign ="center");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
module bottom_shell()
|
|
{
|
|
color(Couleur1){
|
|
Coque(top=0);
|
|
if (PCBFeet==1) // Feet
|
|
translate([PCBPosX,PCBPosY,0])
|
|
Feet();
|
|
}
|
|
}
|
|
|
|
// Coque haut - Top Shell
|
|
module top_shell()
|
|
{
|
|
color( Couleur1,1)
|
|
{
|
|
translate([Length,0,Height+ShellClearance]){
|
|
rotate([0,180,0]){
|
|
Coque(top=1);
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|