You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Emard 00e0f7da15 footprint audio jack dimensions and orientation adjusted ... according to datasheet. Center position not sure, tape and reel information not found.		7 years ago
..
adc/max1112x	connecting ADC substrate pad to GND	7 years ago
battery/Keystone_3000_1x12mm-CoinCell.pretty	battery, remove silkscreen printing from the pad	7 years ago
crystal	32768Hz crystal ABS25 footprint now correct	7 years ago
dcdc_converter	add DC-DC converter to power sheet	8 years ago
esp32	esp-32 3D model	7 years ago
esp8266	Uploading initial kicad project for ULX3S	9 years ago
i2c/SM8.pretty	I2C SM8 footprint properly oriented from TI tape and reel datasheet	7 years ago
jumpers/jumper.pretty	added missing jumper footprint	7 years ago
lattice	FPGA chip bank 0: swap sides A9<->B10 (true-complement was wrong)	7 years ago
logo	logo "HRVATSKI PROIZVOD" enlarged and moved towards audio connector	7 years ago
micro-hdmi-d	Fab layer, moving values to avoid overlap writings	7 years ago
micro-sd	Micro SD outline moved to correct layer (b.mask->f.fab)	7 years ago
oled	removing OLED outline from the silkscreen	7 years ago
rtc/SOT96-1.pretty	NXP RTC SOT96-1 package, same as SOIC-8 but oriented with pin 1	7 years ago
sdram	PCB v1.6 SDRAM fully reworked	7 years ago
usb_otg	connecting some GNDs and GNDing unnamed shield pads on USB connectors	8 years ago
usbserial	add footprint for several ftdi usbserial chip	8 years ago