PCB for ULX3S FPGA R&D board. Fork Sand fork of https://github.com/emard/ulx3s https://www.forksand.com/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
davor 9afb686693
using connectors 2x32 for general purpose and 2x15 for 2 PMODs
8 years ago
doc Uploading initial kicad project for ULX3S 9 years ago
footprints Uploading initial kicad project for ULX3S 9 years ago
pic using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
README.md readme todo updated 9 years ago
fp-lib-table Uploading initial kicad project for ULX3S 9 years ago
gpio.bak using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
gpio.sch using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s-cache.lib using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s.bak using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s.kicad_pcb using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s.kicad_pcb-bak using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s.net using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago
ulx3s.pro Departing from RPI-0 size to a 56x106 mm board 8 years ago
ulx3s.sch using connectors 2x32 for general purpose and 2x15 for 2 PMODs 8 years ago

README.md

ULX3S PCB

This is work-in-progress place for putting some wishes of a small FPGA board, RPI-0 size.

Instead of describing in written, it is better explained when drawn in kicad.

Currently PCB is not routed. Only some footprintes are being collected and some are incomplete,

Here are just so get some insight how will it all physically fit and look.

From production of this, we are far, far away :)

TODO

3.5 mm jack footprint

Completing FPGA shcematics blocks and checking fitness for the footprint

Switching voltage regulators

Check SD card slot footprint

USB and HDMI footprints without thru-holes

SPI OLED placeholder (thru hole probably)

2.54 mm external JTAG header

FTDI usb-jtag chip

Oscillators (25/50/100 MHz)

SPI flash chip for fpga configuration

SDRAM chip 32MB

LEDs: 8 blinkleds, 1 usb led

PushButtons: 5-6 cursor style