You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24 lines
951 B
24 lines
951 B
(Superfly cycle for tormach CNC)
|
|
(Removes thickness in 0.5mm steps in straight lines across part)
|
|
(Assumes 0 at back left top of part)
|
|
(Adjust X/Y values as noted)
|
|
(Can be used by itself, or pasted into beginning of generated code using only lines between comments noting what to copy)
|
|
G21 (set machine to metric)
|
|
G90 (absolute mode)
|
|
G17 (x/y plane)
|
|
(begin section to copy for FreeCAD programs)
|
|
M6 T3 G43 H3 (change tool to superfly)
|
|
M8 (coolant on)
|
|
M3 S3000 (spindle on, speed 3000RPM)
|
|
G0 Z10 (rapid move above part)
|
|
G0 X-45 Y-38.1 (rapid move to left center of part)(adjust Y to -1/2 of part width)
|
|
G0 Z0 (rapid to 0 height of part)
|
|
G1 X131 F200 (pass across to right side, and set feed to 200mm/m)(adjust x to part width +45)
|
|
G1 Z-0.5 (lower Z 0.5mm to -0.5mm)
|
|
G1 X-45 (pass across to left side)
|
|
G0 Z10 (raise cutter to safe location above part)
|
|
M9 (coolant off)
|
|
M5 (turn spindle off)
|
|
(end of section to copy for FreeCAD programs)
|
|
M2 (end program)
|