You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

121 lines
3.7 KiB

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
stepper_dac.cpp - To set stepper current via DAC
Part of Marlin
Copyright (c) 2016 MarlinFirmware
Marlin is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Marlin is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Marlin. If not, see <http://www.gnu.org/licenses/>.
*/
#include "Marlin.h"
#if ENABLED(DAC_STEPPER_CURRENT)
#include "stepper_dac.h"
bool dac_present = false;
const uint8_t dac_order[NUM_AXIS] = DAC_STEPPER_ORDER;
uint16_t dac_channel_pct[XYZE];
int dac_init() {
#if PIN_EXISTS(DAC_DISABLE)
OUT_WRITE(DAC_DISABLE_PIN, LOW); // set pin low to enable DAC
#endif
mcp4728_init();
if (mcp4728_simpleCommand(RESET)) return -1;
dac_present = true;
mcp4728_setVref_all(DAC_STEPPER_VREF);
mcp4728_setGain_all(DAC_STEPPER_GAIN);
return 0;
}
void dac_current_percent(uint8_t channel, float val) {
if (!dac_present) return;
NOMORE(val, 100);
mcp4728_analogWrite(dac_order[channel], val * 0.01 * (DAC_STEPPER_MAX));
mcp4728_simpleCommand(UPDATE);
}
void dac_current_raw(uint8_t channel, uint16_t val) {
if (!dac_present) return;
NOMORE(val, DAC_STEPPER_MAX);
mcp4728_analogWrite(dac_order[channel], val);
mcp4728_simpleCommand(UPDATE);
}
static float dac_perc(int8_t n) { return 100.0 * mcp4728_getValue(dac_order[n]) * (1.0 / (DAC_STEPPER_MAX)); }
static float dac_amps(int8_t n) { return mcp4728_getDrvPct(dac_order[n]) * (DAC_STEPPER_MAX) * (0.125 * (DAC_STEPPER_SENSE)); }
int16_t dac_current_get_percent(AxisEnum axis) { return mcp4728_getDrvPct(dac_order[axis]); }
void dac_current_set_percents(int16_t pct[XYZE]) {
LOOP_XYZE(i) dac_channel_pct[i] = pct[dac_order[i]];
mcp4728_setDrvPct(dac_channel_pct);
}
void dac_print_values() {
if (!dac_present) return;
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Stepper current values in % (Amps):");
SERIAL_ECHO_START;
SERIAL_ECHOPAIR(" X:", dac_perc(X_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(X_AXIS));
SERIAL_ECHOPAIR(") Y:", dac_perc(Y_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Y_AXIS));
SERIAL_ECHOPAIR(") Z:", dac_perc(Z_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(Z_AXIS));
SERIAL_ECHOPAIR(") E:", dac_perc(E_AXIS));
SERIAL_ECHOPAIR(" (", dac_amps(E_AXIS));
SERIAL_ECHOLN(")");
}
void dac_commit_eeprom() {
if (!dac_present) return;
mcp4728_eepromWrite();
}
#endif // DAC_STEPPER_CURRENT