marlin-lulzbot-laser/Marlin/pins_LEAPFROG.h

/**
 * Marlin 3D Printer Firmware
 * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

/**
 * Leapfrog Driver board pin assignments
 */

#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
  #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
#endif

#define BOARD_NAME         "Leapfrog"

//
// Limit Switches
//
#define X_MIN_PIN          47
#define X_MAX_PIN           2
#define Y_MIN_PIN          48
#define Y_MAX_PIN          15
#define Z_MIN_PIN          49
#define Z_MAX_PIN          -1

//
// Steppers
//
#define X_STEP_PIN         28
#define X_DIR_PIN          63
#define X_ENABLE_PIN       29

#define Y_STEP_PIN         14 // A6
#define Y_DIR_PIN          15 // A0
#define Y_ENABLE_PIN       39

#define Z_STEP_PIN         31 // A2
#define Z_DIR_PIN          32 // A6
#define Z_ENABLE_PIN       30 // A1

#define E0_STEP_PIN        34 // 34
#define E0_DIR_PIN         35 // 35
#define E0_ENABLE_PIN      33 // 33

#define E1_STEP_PIN        37 // 37
#define E1_DIR_PIN         40 // 40
#define E1_ENABLE_PIN      36 // 36

//
// Temperature Sensors
//
#define TEMP_0_PIN         13   // Analog Input (D27)
#define TEMP_1_PIN         15   // Analog Input (1)
#define TEMP_BED_PIN       14   // Analog Input (1,2 or I2C)

//
// Heaters / Fans
//
#define HEATER_0_PIN        9
#define HEATER_1_PIN        8 // 12
#define HEATER_2_PIN       11 // 13
#define HEATER_BED_PIN     10 // 14/15

#define FAN_PIN             7

//
// Misc. Functions
//
#define SDSS               11
#define LED_PIN            13
#define SOL1_PIN           16
#define SOL2_PIN           17

/*  Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31)  */
Further cleanup of comments, partial Doxygen-style Following up on #3231 9 years ago			`/**`
Added gplv3 header to all Marlin files 9 years ago			`* Marlin 3D Printer Firmware`
			`* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]`
			`*`
			`* Based on Sprinter and grbl.`
			`* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm`
			`*`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 3 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`*`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*`
			`*/`

Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`/**`
			`* Leapfrog Driver board pin assignments`
			`*/`

			`#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)`
Enclose all #error strings with apostrophes 9 years ago			`#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#endif`

Add "About Printer" information menu. Includes: firmware version / branch / date. extruder count board information (name, serial details, power supply type) thermistors (names, min/max temperatures) *printer statistics (PRINTCOUNTER details) Thanks to @thinkyhead for contributions. 8 years ago			`#define BOARD_NAME "Leapfrog"`

Consistent order/formatting of pins files 8 years ago			`//`
			`// Limit Switches`
			`//`
			`#define X_MIN_PIN 47`
			`#define X_MAX_PIN 2`
			`#define Y_MIN_PIN 48`
			`#define Y_MAX_PIN 15`
			`#define Z_MIN_PIN 49`
			`#define Z_MAX_PIN -1`

			`//`
			`// Steppers`
			`//`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago			`#define X_STEP_PIN 28`
			`#define X_DIR_PIN 63`
			`#define X_ENABLE_PIN 29`

			`#define Y_STEP_PIN 14 // A6`
			`#define Y_DIR_PIN 15 // A0`
			`#define Y_ENABLE_PIN 39`

			`#define Z_STEP_PIN 31 // A2`
			`#define Z_DIR_PIN 32 // A6`
			`#define Z_ENABLE_PIN 30 // A1`

Consistent order/formatting of pins files 8 years ago			`#define E0_STEP_PIN 34 // 34`
			`#define E0_DIR_PIN 35 // 35`
			`#define E0_ENABLE_PIN 33 // 33`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago
Consistent order/formatting of pins files 8 years ago			`#define E1_STEP_PIN 37 // 37`
			`#define E1_DIR_PIN 40 // 40`
			`#define E1_ENABLE_PIN 36 // 36`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago
Consistent order/formatting of pins files 8 years ago			`//`
			`// Temperature Sensors`
			`//`
Label analog pins in a similar way Some other pins formatting also 8 years ago			`#define TEMP_0_PIN 13 // Analog Input (D27)`
			`#define TEMP_1_PIN 15 // Analog Input (1)`
			`#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C)`
Consistent order/formatting of pins files 8 years ago
			`//`
			`// Heaters / Fans`
			`//`
			`#define HEATER_0_PIN 9`
			`#define HEATER_1_PIN 8 // 12`
			`#define HEATER_2_PIN 11 // 13`
			`#define HEATER_BED_PIN 10 // 14/15`

			`#define FAN_PIN 7`

Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 8 years ago			`//`
			`// Misc. Functions`
			`//`
			`#define SDSS 11`
			`#define LED_PIN 13`
			`#define SOL1_PIN 16`
			`#define SOL2_PIN 17`
Split up pins to make it more manageable Hopefully this is helpful to organization and future expansion…. 10 years ago
Follow-up the PR #4955, etc ・More ANALOG NUMBERING to Analog Input ・Add comment header to all the section of all the pins files ・Sort sections as follows: 1. Some special definitions (USBCON, LARGE_FLASH, etc) 2. Servos 3. Limit Switches 4. Z Probe 5. Steppers 6. Temperature Sensors 7. Heaters / Fans 8. Misc. Functions 9. LCD / Controller ・Move MAX6675_SS into "Temperature Sensors" section ・Adjust spacing 8 years ago			`/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */`