# ifndef LANGUAGE_H
# define LANGUAGE_H
// NOTE: IF YOU CHANGE THIS FILE / MERGE THIS FILE WITH CHANGES
//
// ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
// ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
// Languages
// 1 English
// 2 Polish
// 3 French (awaiting translation!)
// 4 German
// 5 Spanish
// 6 Russian
// 7 Italian
// 8 Portuguese
# define LANGUAGE_CHOICE 1 // Pick your language from the list above
# define PROTOCOL_VERSION "1.0"
# if MOTHERBOARD == 7 || MOTHERBOARD == 71
# define MACHINE_NAME "Ultimaker"
# define FIRMWARE_URL "http: //firmware.ultimaker.com"
# else
# define MACHINE_NAME "Mendel"
# define FIRMWARE_URL "http: //www.mendel-parts.com"
# endif
# define STRINGIFY_(n) #n
# define STRINGIFY(n) STRINGIFY_(n)
# if LANGUAGE_CHOICE == 1
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Ready."
# define MSG_SD_INSERTED "Card inserted"
# define MSG_SD_REMOVED "Card removed"
# define MSG_MAIN " Main \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Disable Steppers"
# define MSG_AUTO_HOME " Auto Home"
# define MSG_SET_ORIGIN " Set Origin"
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_PLA_SETTINGS " Preheat PLA Setting"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_PREHEAT_ABS_SETTINGS " Preheat ABS Setting"
# define MSG_COOLDOWN " Cooldown"
# define MSG_EXTRUDE " Extrude"
# define MSG_RETRACT " Retract"
# define MSG_PREHEAT_PLA " Preheat PLA"
# define MSG_PREHEAT_ABS " Preheat ABS"
# define MSG_MOVE_AXIS " Move Axis \x7E"
# define MSG_SPEED " Speed:"
# define MSG_NOZZLE " \002Nozzle:"
# define MSG_NOZZLE1 " \002Nozzle2:"
# define MSG_NOZZLE2 " \002Nozzle3:"
# define MSG_BED " \002Bed:"
# define MSG_FAN_SPEED " Fan speed:"
# define MSG_FLOW " Flow:"
# define MSG_CONTROL " Control \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-retract:"
# define MSG_XSTEPS " Xsteps / mm:"
# define MSG_YSTEPS " Ysteps / mm:"
# define MSG_ZSTEPS " Zsteps / mm:"
# define MSG_ESTEPS " Esteps / mm:"
# define MSG_MAIN_WIDE " Main \003"
# define MSG_RECTRACT_WIDE " Rectract \x7E"
# define MSG_TEMPERATURE_WIDE " Temperature \x7E"
# define MSG_TEMPERATURE_RTN " Temperature \003"
# define MSG_MOTION_WIDE " Motion \x7E"
# define MSG_STORE_EPROM " Store memory"
# define MSG_LOAD_EPROM " Load memory"
# define MSG_RESTORE_FAILSAFE " Restore Failsafe"
# define MSG_REFRESH "\004Refresh"
# define MSG_WATCH " Watch \003"
# define MSG_PREPARE " Prepare \x7E"
# define MSG_PREPARE_ALT " Prepare \003"
# define MSG_CONTROL_ARROW " Control \x7E"
# define MSG_RETRACT_ARROW " Retract \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_PAUSE_PRINT " Pause Print \x7E"
# define MSG_RESUME_PRINT " Resume Print \x7E"
# define MSG_STOP_PRINT " Stop Print \x7E"
# define MSG_CARD_MENU " Card Menu \x7E"
# define MSG_NO_CARD " No Card"
# define MSG_DWELL "Sleep..."
# define MSG_USERWAIT "Wait for user..."
# define MSG_NO_MOVE "No move."
# define MSG_PART_RELEASE "Partial Release"
# define MSG_KILLED "KILLED. "
# define MSG_STOPPED "STOPPED. "
# define MSG_STEPPER_RELEASED "Released."
# define MSG_CONTROL_RETRACT " Retract mm:"
# define MSG_CONTROL_RETRACTF " Retract F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
# define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " External Reset"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Last Updated: "
# define MSG_FREE_MEMORY " Free Memory: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Done saving file."
# define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: "
# define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
# define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: "
# define MSG_FILE_PRINTED "Done printing file"
# define MSG_BEGIN_FILE_LIST "Begin file list"
# define MSG_END_FILE_LIST "End file list"
# define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
# define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
# define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
# define MSG_HEATING "Heating..."
# define MSG_HEATING_COMPLETE "Heating done."
# define MSG_BED_HEATING "Bed Heating."
# define MSG_BED_DONE "Bed done."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Count X: "
# define MSG_ERR_KILLED "Printer halted. kill() called!"
# define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
# define MSG_RESEND "Resend: "
# define MSG_UNKNOWN_COMMAND "Unknown command: \""
# define MSG_ACTIVE_EXTRUDER "Active Extruder: "
# define MSG_INVALID_EXTRUDER "Invalid extruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Reporting endstop status"
# define MSG_ENDSTOP_HIT "TRIGGERED"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened: "
# define MSG_SD_SIZE " Size: "
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
# define MSG_STEPPER_TO_HIGH "Steprate to high: "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
# endif
# if LANGUAGE_CHOICE == 2
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Gotowe."
# define MSG_SD_INSERTED "Karta wlozona"
# define MSG_SD_REMOVED "Karta usunieta"
# define MSG_MAIN " Menu \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Wylacz silniki"
# define MSG_AUTO_HOME " Auto. poz. zerowa"
# define MSG_SET_ORIGIN " Ustaw punkt zerowy"
# define MSG_PREHEAT_PLA " Rozgrzej PLA"
# define MSG_PREHEAT_PLA_SETTINGS " Ustawienia roz. PLA"
# define MSG_PREHEAT_ABS " Rozgrzej ABS"
# define MSG_PREHEAT_ABS_SETTINGS " Ustawienia roz. ABS"
# define MSG_COOLDOWN " Chlodzenie"
# define MSG_EXTRUDE " Ekstruzja"
# define MSG_RETRACT " Cofanie"
# define MSG_MOVE_AXIS " Ruch osi \x7E"
# define MSG_SPEED " Predkosc:"
# define MSG_NOZZLE " \002Dysza:"
# define MSG_NOZZLE1 " \002Dysza2:"
# define MSG_NOZZLE2 " \002Dysza3:"
# define MSG_BED " \002Loze:"
# define MSG_FAN_SPEED " Obroty wiatraka:"
# define MSG_FLOW " Przeplyw:"
# define MSG_CONTROL " Kontrola \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Mnoznik:"
# define MSG_AUTOTEMP " Auto. temp.:"
# define MSG_ON "Wl. "
# define MSG_OFF "Wyl."
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Zryw Vxy: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " Vskok min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-wycofanie:"
# define MSG_XSTEPS " krokiX / mm:"
# define MSG_YSTEPS " krokiY / mm:"
# define MSG_ZSTEPS " krokiZ / mm:"
# define MSG_ESTEPS " krokiE / mm:"
# define MSG_MAIN_WIDE " Menu \003"
# define MSG_RECTRACT_WIDE " Wycofanie \x7E"
# define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
# define MSG_TEMPERATURE_RTN " Temperatura \003"
# define MSG_MOTION_WIDE " Ruch \x7E"
# define MSG_STORE_EPROM " Zapisz w pamieci"
# define MSG_LOAD_EPROM " Wczytaj z pamieci"
# define MSG_RESTORE_FAILSAFE " Ustawienia fabryczne"
# define MSG_REFRESH "\004Odswiez"
# define MSG_WATCH " Obserwuj \003"
# define MSG_PREPARE " Przygotuj \x7E"
# define MSG_PREPARE_ALT " Przygotuj \003"
# define MSG_CONTROL_ARROW " Kontroluj \x7E"
# define MSG_RETRACT_ARROW " Wycofaj \x7E"
# define MSG_TUNE "Strojenie\x7E"
# define MSG_PAUSE_PRINT " Pauza \x7E"
# define MSG_RESUME_PRINT " Wznowienie \x7E"
# define MSG_STOP_PRINT " Stop \x7E"
# define MSG_CARD_MENU " Menu SDCard \x7E"
# define MSG_NO_CARD " Brak karty"
# define MSG_DWELL "Uspij..."
# define MSG_USERWAIT "Czekaj na uzytkownika..."
# define MSG_NO_MOVE "Brak ruchu."
# define MSG_PART_RELEASE "Czesciowe zwolnienie"
# define MSG_KILLED "Ubity. "
# define MSG_STOPPED "Zatrzymany. "
# define MSG_STEPPER_RELEASED "Zwolniony."
# define MSG_CONTROL_RETRACT " Wycofaj mm:"
# define MSG_CONTROL_RETRACTF " Wycofaj F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Skok Z mm:"
# define MSG_CONTROL_RETRACT_RECOVER " Cof. wycof. +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " Cof. wycof. F:"
# define MSG_AUTORETRACT " Auto. wycofanie:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Cos jest nie tak ze struktura menu."
// Serial Console Messages
# define MSG_Enqueing "Kolejkowanie \""
# define MSG_POWERUP "Zasilanie wlaczone"
# define MSG_EXTERNAL_RESET " Reset (zewnetrzny)"
# define MSG_BROWNOUT_RESET " Reset (spadek napiecia)"
# define MSG_WATCHDOG_RESET " Reset (watchdog)"
# define MSG_SOFTWARE_RESET " Reset (programowy)"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Ostatnia aktualizacja: "
# define MSG_FREE_MEMORY " Wolna pamiec: "
# define MSG_PLANNER_BUFFER_BYTES " Bufor planisty krokow (w bajtach): "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Plik zapisany."
# define MSG_ERR_LINE_NO "Numer linijki nie jest ostatnim numerem linijki+1; ostatnia linijka:"
# define MSG_ERR_CHECKSUM_MISMATCH "Niezgodna suma kontrolna; ostatnia linijka: "
# define MSG_ERR_NO_CHECKSUM "Brak sumy kontrolnej w linijce; ostatnia linijka:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Brak numery linijki przy sumie kontrolnej; ostatnia linijka:"
# define MSG_FILE_PRINTED "Ukonczono wydruk z pliku"
# define MSG_BEGIN_FILE_LIST "Start listy plikow"
# define MSG_END_FILE_LIST "Koniec listy plikow"
# define MSG_M104_INVALID_EXTRUDER "M104 Niepoprawny ekstruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Niepoprawny ekstruder "
# define MSG_ERR_NO_THERMISTORS "Brak termistorow - brak temperatury :("
# define MSG_M109_INVALID_EXTRUDER "M109 Niepoprawny ekstruder "
# define MSG_HEATING "Nagrzewanie ekstrudera..."
# define MSG_HEATING_COMPLETE "Nagrzewanie ekstrudera zakonczone."
# define MSG_BED_HEATING "Nagrzewanie loza..."
# define MSG_BED_DONE "Nagrzewanie loza zakonczone."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Liczenie X: "
# define MSG_ERR_KILLED "Drukarka zatrzymana. Wywolano kill()"
# define MSG_ERR_STOPPED "Drukarka zatrzymana z powodu bledu. Usun problem i zrestartuj drukartke komenda M999. (temperatura zostala zresetowana; ustaw temperature po restarcie)"
# define MSG_RESEND "Wyslij ponownie: "
# define MSG_UNKNOWN_COMMAND "Nieznane polecenie: \""
# define MSG_ACTIVE_EXTRUDER "Aktywny ekstruder: "
# define MSG_INVALID_EXTRUDER "Niepoprawny ekstruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Zgloszenie statusu wylacznikow krancowych"
# define MSG_ENDSTOP_HIT "WYZWOLONY"
# define MSG_ENDSTOP_OPEN "otwarty"
# define MSG_SD_CANT_OPEN_SUBDIR "Nie mozna otworzyc podkatalogu"
# define MSG_SD_INIT_FAIL "Blad inicjalizacji karty SD"
# define MSG_SD_VOL_INIT_FAIL "Blad inizjalizacji wolumenu"
# define MSG_SD_OPENROOT_FAIL "Blad odczytywania katalogu glownego"
# define MSG_SD_CARD_OK "Karta SD zainicjalizowana"
# define MSG_SD_WORKDIR_FAIL "Blad odczytywania katalogu roboczego"
# define MSG_SD_OPEN_FILE_FAIL "Nie mozna otworzyc pliku: "
# define MSG_SD_FILE_OPENED "Otwarto plik:"
# define MSG_SD_SIZE " Rozmiar:"
# define MSG_SD_FILE_SELECTED "Wybrano plik"
# define MSG_SD_WRITE_TO_FILE "Zapisywanie do pliku: "
# define MSG_SD_PRINTING_BYTE "Drukowanie z karty SD, bajt "
# define MSG_SD_NOT_PRINTING "Nie trwa drukowanie z karty SD"
# define MSG_SD_ERR_WRITE_TO_FILE "blad podczas zapisu do pliku"
# define MSG_SD_CANT_ENTER_SUBDIR "Nie mozna odczytac podkatalogu: "
# define MSG_STEPPER_TO_HIGH "Za duza czestotliwosc krokow: "
# define MSG_ENDSTOPS_HIT "Wylacznik krancowy zostal wyzwolony na pozycji: "
# define MSG_ERR_COLD_EXTRUDE_STOP " uniemozliwiono zimna ekstruzje"
# define MSG_ERR_LONG_EXTRUDE_STOP " uniemozliwiono zbyt dluga ekstruzje"
# endif
# if LANGUAGE_CHOICE == 3
# error "There is no French translation available yet. Can you help? (you need to choose a different language in order to compile Marlin)"
# endif
# if LANGUAGE_CHOICE == 4
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Bereit."
# define MSG_SD_INSERTED "SDKarte erkannt"
# define MSG_SD_REMOVED "SDKarte entfernt"
# define MSG_MAIN " Hauptmneü \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Stepper abschalten"
# define MSG_AUTO_HOME " Auto Nullpunkt"
# define MSG_SET_ORIGIN " Setze Nullpunkt"
# define MSG_PREHEAT_PLA " Vorwärmen PLA"
# define MSG_PREHEAT_PLA_SETTINGS " Vorwärmen PLA Einstellungen"
# define MSG_PREHEAT_ABS " Vorwärmen ABS"
# define MSG_PREHEAT_ABS_SETTINGS " Vorwärmen ABS Einstellungen"
# define MSG_COOLDOWN " Abkühlen"
# define MSG_EXTRUDE " Extrude"
# define MSG_RETRACT " Retract"
# define MSG_MOVE_AXIS " Achsen bewegen\x7E"
# define MSG_SPEED " Geschw:"
# define MSG_NOZZLE " \002Düse:"
# define MSG_NOZZLE1 " \002Düse2:"
# define MSG_NOZZLE2 " \002Düse3:"
# define MSG_BED " \002Bett:"
# define MSG_FAN_SPEED " Lüftergeschw.:"
# define MSG_FLOW " Fluß:"
# define MSG_CONTROL " Einstellungen \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Faktor:"
# define MSG_AUTOTEMP " AutoTemp:"
# define MSG_ON "Ein "
# define MSG_OFF "Aus "
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-Retract:"
# define MSG_XSTEPS " Xsteps / mm:"
# define MSG_YSTEPS " Ysteps / mm:"
# define MSG_ZSTEPS " Zsteps / mm:"
# define MSG_ESTEPS " Esteps / mm:"
# define MSG_MAIN_WIDE " Hauptmenü \003"
# define MSG_RECTRACT_WIDE " Rectract \x7E"
# define MSG_WATCH " Beobachten \003"
# define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
# define MSG_TEMPERATURE_RTN " Temperatur \003"
# define MSG_MOTION_WIDE " Bewegung \x7E"
# define MSG_STORE_EPROM " EPROM speichern"
# define MSG_LOAD_EPROM " EPROM laden"
# define MSG_RESTORE_FAILSAFE " Standardkonfig."
# define MSG_REFRESH "\004Aktualisieren"
# define MSG_PREPARE " Vorbereitung \x7E"
# define MSG_PREPARE_ALT " Vorbereitung \003"
# define MSG_CONTROL_ARROW " Einstellungen \x7E"
# define MSG_TUNE " Justierung \x7E"
# define MSG_PAUSE_PRINT " Druck anhalten\x7E"
# define MSG_RESUME_PRINT " Druck fortsetz\x7E"
# define MSG_STOP_PRINT " Druck stoppen \x7E"
# define MSG_CARD_MENU " SDKarten Menü \x7E"
# define MSG_NO_CARD " Keine SDKarte"
# define MSG_DWELL "Warten..."
# define MSG_USERWAIT "Warte auf Nutzer..."
# define MSG_NO_MOVE "Kein Zug."
# define MSG_PART_RELEASE "Stepper tlw frei"
# define MSG_KILLED "KILLED"
# define MSG_STOPPED "GESTOPPT"
# define MSG_STEPPER_RELEASED "Stepper frei"
# define MSG_CONTROL_RETRACT " Retract mm:"
# define MSG_CONTROL_RETRACTF " Retract F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
# define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in Menüstruktur."
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " External Reset"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_MARLIN "Marlin: "
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Last Updated: "
# define MSG_FREE_MEMORY " Free Memory: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Done saving file."
# define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
# define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
# define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
# define MSG_FILE_PRINTED "Done printing file"
# define MSG_BEGIN_FILE_LIST "Begin file list"
# define MSG_END_FILE_LIST "End file list"
# define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
# define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
# define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
# define MSG_HEATING "Heating..."
# define MSG_HEATING_COMPLETE "Heating done."
# define MSG_BED_HEATING "Bed Heating."
# define MSG_BED_DONE "Bed done."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Count X:"
# define MSG_ERR_KILLED "Printer halted. kill() called !!"
# define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
# define MSG_RESEND "Resend:"
# define MSG_UNKNOWN_COMMAND "Unknown command:\""
# define MSG_ACTIVE_EXTRUDER "Active Extruder: "
# define MSG_INVALID_EXTRUDER "Invalid extruder"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Reporting endstop status"
# define MSG_ENDSTOP_HIT "TRIGGERED"
# define MSG_ENDSTOP_OPEN "open"
# define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
# define MSG_SD_INIT_FAIL "SD init fail"
# define MSG_SD_VOL_INIT_FAIL "volume.init failed"
# define MSG_SD_OPENROOT_FAIL "openRoot failed"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "workDir open failed"
# define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
# define MSG_SD_FILE_OPENED "File opened:"
# define MSG_SD_SIZE " Size:"
# define MSG_SD_FILE_SELECTED "File selected"
# define MSG_SD_WRITE_TO_FILE "Writing to file: "
# define MSG_SD_PRINTING_BYTE "SD printing byte "
# define MSG_SD_NOT_PRINTING "Not SD printing"
# define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
# define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
# define MSG_STEPPER_TO_HIGH "Steprate to high : "
# define MSG_ENDSTOPS_HIT "endstops hit: "
# define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
# define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
# endif
# if LANGUAGE_CHOICE == 5
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Lista."
# define MSG_SD_INSERTED "Tarjeta SD Colocada"
# define MSG_SD_REMOVED "Tarjeta SD Retirada"
# define MSG_MAIN " Menu Principal \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Apagar Motores"
# define MSG_AUTO_HOME " Llevar Ejes al Cero"
# define MSG_SET_ORIGIN " Establecer Cero"
# define MSG_COOLDOWN " Enfriar"
# define MSG_EXTRUDE " Extruir"
# define MSG_RETRACT " Retraer"
# define MSG_PREHEAT_PLA " Precalentar PLA"
# define MSG_PREHEAT_PLA_SETTINGS " Ajustar temp. PLA"
# define MSG_PREHEAT_ABS " Precalentar ABS"
# define MSG_PREHEAT_ABS_SETTINGS " Ajustar temp. ABS"
# define MSG_MOVE_AXIS " Mover Ejes \x7E"
# define MSG_SPEED " Velocidad:"
# define MSG_NOZZLE " \002Nozzle:"
# define MSG_NOZZLE1 " \002Nozzle2:"
# define MSG_NOZZLE2 " \002Nozzle3:"
# define MSG_BED " \002Base:"
# define MSG_FAN_SPEED " Ventilador:"
# define MSG_FLOW " Flujo:"
# define MSG_CONTROL " Control \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-retrac.:"
# define MSG_XSTEPS " Xpasos / mm:"
# define MSG_YSTEPS " Ypasos / mm:"
# define MSG_ZSTEPS " Zpasos / mm:"
# define MSG_ESTEPS " Epasos / mm:"
# define MSG_MAIN_WIDE " Menu Principal \003"
# define MSG_RECTRACT_WIDE " Retraer \x7E"
# define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
# define MSG_TEMPERATURE_RTN " Temperatura \003"
# define MSG_MOTION_WIDE " Movimiento \x7E"
# define MSG_STORE_EPROM " Guardar Memoria"
# define MSG_LOAD_EPROM " Cargar Memoria"
# define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
# define MSG_REFRESH "\004Volver a cargar"
# define MSG_WATCH " Monitorizar \003"
# define MSG_PREPARE " Preparar \x7E"
# define MSG_PREPARE_ALT " Preparar \003"
# define MSG_CONTROL_ARROW " Control \x7E"
# define MSG_RETRACT_ARROW " Retraer \x7E"
# define MSG_TUNE " Ajustar \x7E"
# define MSG_PAUSE_PRINT " Pausar Impresion \x7E"
# define MSG_RESUME_PRINT " Reanudar Impresion \x7E"
# define MSG_STOP_PRINT " Detener Impresion \x7E"
# define MSG_CARD_MENU " Menu de SD \x7E"
# define MSG_NO_CARD " No hay Tarjeta SD"
# define MSG_DWELL "Reposo..."
# define MSG_USERWAIT "Esperando Ordenes..."
# define MSG_NO_MOVE "Sin movimiento"
# define MSG_PART_RELEASE "Desacople Parcial"
# define MSG_KILLED "PARADA DE EMERGENCIA. "
# define MSG_STOPPED "PARADA. "
# define MSG_STEPPER_RELEASED "Desacoplada."
# define MSG_CONTROL_RETRACT " Retraer mm:"
# define MSG_CONTROL_RETRACTF " Retraer F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
# define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
// Serial Console Messages
# define MSG_Enqueing "En cola \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
# define MSG_WATCHDOG_RESET " Reset por Bloqueo"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Autor: "
# define MSG_CONFIGURATION_VER " Ultima actualizacion: "
# define MSG_FREE_MEMORY " Memoria libre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardado."
# define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
# define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
# define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
# define MSG_FILE_PRINTED "Impresion terminada"
# define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
# define MSG_END_FILE_LIST "Fin de la lista de archivos"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
# define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
# define MSG_HEATING "Calentando..."
# define MSG_HEATING_COMPLETE "Calentamiento Hecho."
# define MSG_BED_HEATING "Calentando la base."
# define MSG_BED_DONE "Base Caliente."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Cuenta X:"
# define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
# define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
# define MSG_RESEND "Reenviar:"
# define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
# define MSG_INVALID_EXTRUDER "Extrusor Invalido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_M119_REPORT "Comprobando fines de carrera."
# define MSG_ENDSTOP_HIT "PULSADO"
# define MSG_ENDSTOP_OPEN "abierto"
# define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
# define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
# define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
# define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
# define MSG_SD_CARD_OK "Tarjeta SD OK"
# define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
# define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
# define MSG_SD_FILE_OPENED "Archivo abierto:"
# define MSG_SD_SIZE " Tamaño:"
# define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
# define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
# define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
# define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
# define MSG_SD_CANT_ENTER_SUBDIR "No se puede abrir la carpeta:"
# define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
# define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
# define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
# define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
# endif
# if LANGUAGE_CHOICE == 6
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Готов."
# define MSG_SD_INSERTED "Карта вставлена"
# define MSG_SD_REMOVED "Карта извлечена"
# define MSG_MAIN " Меню \003"
# define MSG_AUTOSTART " Автостарт "
# define MSG_DISABLE_STEPPERS " Выключить двигатели"
# define MSG_AUTO_HOME " Парковка "
# define MSG_SET_ORIGIN " Запомнить ноль "
# define MSG_PREHEAT_PLA " Преднагрев PLA "
# define MSG_PREHEAT_PLA_SETTINGS " Настр. преднагр.PLA"
# define MSG_PREHEAT_ABS " Преднагрев ABS "
# define MSG_PREHEAT_ABS_SETTINGS " Настр. преднагр.ABS"
# define MSG_COOLDOWN " Охлаждение "
# define MSG_EXTRUDE " Экструзия "
# define MSG_RETRACT " Откат"
# define MSG_MOVE_AXIS " Движение по осям \x7E"
# define MSG_SPEED " Скорость:"
# define MSG_NOZZLE " \002 Фильера:"
# define MSG_NOZZLE1 " \002 Филье р а
# define MSG_NOZZLE2 " \002 Филье р а
# define MSG_BED " \002 Кровать:"
# define MSG_FAN_SPEED " Куллер:"
# define MSG_FLOW " Поток:"
# define MSG_CONTROL " Настройки \003"
# define MSG_MIN " \002 Минимум:"
# define MSG_MAX " \002 Максимум:"
# define MSG_FACTOR " \002 Фактор:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "Вкл. "
# define MSG_OFF "Выкл. "
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-retract:"
# define MSG_XSTEPS " X шаг / mm:"
# define MSG_YSTEPS " Y шаг / mm:"
# define MSG_ZSTEPS " Z шаг / mm:"
# define MSG_ESTEPS " E шаг / mm:"
# define MSG_MAIN_WIDE " Меню \003"
# define MSG_RECTRACT_WIDE " Откат подачи \x7E"
# define MSG_TEMPERATURE_WIDE " Температура \x7E"
# define MSG_TEMPERATURE_RTN " Температура \003"
# define MSG_MOTION_WIDE " Скорости \x7E"
# define MSG_STORE_EPROM " Сохранить настройки"
# define MSG_LOAD_EPROM " Загрузить настройки"
# define MSG_RESTORE_FAILSAFE " С б р о с
# define MSG_REFRESH "\004О б о
# define MSG_WATCH " Обзор \003"
# define MSG_PREPARE " Действия \x7E"
# define MSG_PREPARE_ALT " Действия \003"
# define MSG_CONTROL_ARROW " Настройки \x7E"
# define MSG_RETRACT_ARROW " Настройки отката \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_PAUSE_PRINT " Пауза печати \x7E"
# define MSG_RESUME_PRINT " Продолжить печать \x7E"
# define MSG_STOP_PRINT " Остановить печать \x7E"
# define MSG_CARD_MENU " Меню карты \x7E"
# define MSG_NO_CARD " Нет карты"
# define MSG_DWELL "Сон..."
# define MSG_USERWAIT "Нажмите для продолж."
# define MSG_NO_MOVE "Нет движения. "
# define MSG_PART_RELEASE " Извлечение принта "
# define MSG_KILLED "УБИТО. "
# define MSG_STOPPED "ОСТАНОВЛЕНО. "
# define MSG_STEPPER_RELEASED "Двигатели отключены."
# define MSG_CONTROL_RETRACT " Откат mm:"
# define MSG_CONTROL_RETRACTF " Откат F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Прыжок mm:"
# define MSG_CONTROL_RETRACT_RECOVER " Возврат +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " Возврат F:"
# define MSG_AUTORETRACT " АвтоОткат:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Ошибка в структуре меню."
// Serial Console Messages
# define MSG_Enqueing "Запланировано \""
# define MSG_POWERUP "Включение питания"
# define MSG_EXTERNAL_RESET " Внешний с б р о с
# define MSG_BROWNOUT_RESET " Brown out с б р о с
# define MSG_WATCHDOG_RESET " Watchdog с б р о с
# define MSG_SOFTWARE_RESET " программный с б р о с
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Автор: "
# define MSG_CONFIGURATION_VER " Последнее обновление: "
# define MSG_FREE_MEMORY " Памяти свободно: "
# define MSG_PLANNER_BUFFER_BYTES " Буффер очереди команд Bytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Файл записан."
# define MSG_ERR_LINE_NO "Номен строки это не последняя строка+1, последняя строка:"
# define MSG_ERR_CHECKSUM_MISMATCH "контрольная сумма не совпадает, последняя строка:"
# define MSG_ERR_NO_CHECKSUM "нет контрольной суммы для строки, последняя строка:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "нет строки для контрольной суммы, последняя строка:"
# define MSG_FILE_PRINTED "Печать файла завершена"
# define MSG_BEGIN_FILE_LIST "Список файлов"
# define MSG_END_FILE_LIST "Конец списка файлов"
# define MSG_M104_INVALID_EXTRUDER "M104 ошибка экструдера "
# define MSG_M105_INVALID_EXTRUDER "M105 ошибка экструдера "
# define MSG_ERR_NO_THERMISTORS "Нет термистра - нет температуры"
# define MSG_M109_INVALID_EXTRUDER "M109 ошибка экструдера "
# define MSG_HEATING "Нагрев... "
# define MSG_HEATING_COMPLETE "Наргето. "
# define MSG_BED_HEATING "Нагрев стола... "
# define MSG_BED_DONE "Стол нагрет. "
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Count X:"
# define MSG_ERR_KILLED "Принтер остановлен. вызов kill() !!"
# define MSG_ERR_STOPPED "Ошибка принтера, останов. Устраните неисправность и используйте M999 для перезагрузки!. (Температура недоступна. Проверьте датчики)"
# define MSG_RESEND "Переотправка:"
# define MSG_UNKNOWN_COMMAND "Неизвестная команда:\""
# define MSG_ACTIVE_EXTRUDER "Активный экструдер: "
# define MSG_INVALID_EXTRUDER "Ошибка экструдера"
# define MSG_X_MIN "x_min:"
# define MSG_X_MAX "x_max:"
# define MSG_Y_MIN "y_min:"
# define MSG_Y_MAX "y_max:"
# define MSG_Z_MIN "z_min:"
# define MSG_Z_MAX "z_max:"
# define MSG_SD_CANT_OPEN_SUBDIR "Н е
# define MSG_SD_INIT_FAIL "Ошибка инициализации SD"
# define MSG_SD_VOL_INIT_FAIL "Ошибка инициализации раздела"
# define MSG_SD_OPENROOT_FAIL "Н е
# define MSG_SD_CARD_OK "SD карта в порядке"
# define MSG_SD_WORKDIR_FAIL "не открыть рабочую папку"
# define MSG_SD_OPEN_FILE_FAIL "Ошибка чтения, файл: "
# define MSG_SD_FILE_OPENED "Файл открыт:"
# define MSG_SD_SIZE " Размер:"
# define MSG_SD_FILE_SELECTED "Файл выбран"
# define MSG_SD_WRITE_TO_FILE "Запись в файл: "
# define MSG_SD_PRINTING_BYTE "SD печать byte "
# define MSG_SD_NOT_PRINTING "нет SD печати"
# define MSG_SD_ERR_WRITE_TO_FILE "ошибка записи в файл"
# define MSG_SD_CANT_ENTER_SUBDIR "Н е
# define MSG_STEPPER_TO_HIGH "Частота шагов очень высока : "
# define MSG_ENDSTOPS_HIT "концевик сработал: "
# define MSG_ERR_COLD_EXTRUDE_STOP " защита холодной экструзии"
# define MSG_ERR_LONG_EXTRUDE_STOP " защита превышения длинны экструзии"
# define MSG_M119_REPORT "Статус концевиков"
# define MSG_ENDSTOP_HIT "Срабатывание концевика"
# define MSG_ENDSTOP_OPEN "Концевик освобожден"
# endif
# if LANGUAGE_CHOICE == 7
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Pronto."
# define MSG_SD_INSERTED "SD Card inserita"
# define MSG_SD_REMOVED "SD Card rimossa"
# define MSG_MAIN " Menu principale \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Disabilita Motori Passo-Passo"
# define MSG_AUTO_HOME " Auto Home"
# define MSG_SET_ORIGIN " Imposta Origini Assi"
# define MSG_PREHEAT_PLA " Preriscalda PLA"
# define MSG_PREHEAT_PLA_SETTINGS " Impostazioni Preriscaldamento PLA"
# define MSG_PREHEAT_ABS " Preriscalda ABS"
# define MSG_PREHEAT_ABS_SETTINGS " Impostazioni Preriscaldamento ABS"
# define MSG_COOLDOWN " Rafredda"
# define MSG_EXTRUDE " Estrudi"
# define MSG_RETRACT " Ritrai"
# define MSG_MOVE_AXIS " Muovi Asse \x7E"
# define MSG_SPEED " Velcità:"
# define MSG_NOZZLE " \002Ugello:"
# define MSG_NOZZLE1 " \002Ugello2:"
# define MSG_NOZZLE2 " \002Ugello3:"
# define MSG_BED " \002Piatto:"
# define MSG_FAN_SPEED " Velocità Ventola:"
# define MSG_FLOW " Flusso:"
# define MSG_CONTROL " Controllo \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-ritrai:"
# define MSG_XSTEPS " Xpassi / mm:"
# define MSG_YSTEPS " Ypassi / mm:"
# define MSG_ZSTEPS " Zpassi / mm:"
# define MSG_ESTEPS " Epassi / mm:"
# define MSG_MAIN_WIDE " Menu Principale \003"
# define MSG_RECTRACT_WIDE " Ritrai \x7E"
# define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
# define MSG_TEMPERATURE_RTN " Temperatura \003"
# define MSG_MOTION_WIDE " Movimento \x7E"
# define MSG_STORE_EPROM " Salva in memoria"
# define MSG_LOAD_EPROM " Carica dalla memoria"
# define MSG_RESTORE_FAILSAFE " Configurazioni di default"
# define MSG_REFRESH "\004Aggiorna"
# define MSG_WATCH " Guarda \003"
# define MSG_PREPARE " Prepara \x7E"
# define MSG_PREPARE_ALT " Prepara \003"
# define MSG_CONTROL_ARROW " Controllo \x7E"
# define MSG_RETRACT_ARROW " Ritrai \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_PAUSE_PRINT " Metti in Pausa la Stampa \x7E"
# define MSG_RESUME_PRINT " Riprendi Stampa \x7E"
# define MSG_STOP_PRINT " Arresta Stampa \x7E"
# define MSG_CARD_MENU " Card Menu \x7E"
# define MSG_NO_CARD " No Card"
# define MSG_DWELL " Sospensione..."
# define MSG_USERWAIT "Attendi utente..."
# define MSG_NO_MOVE "Nessun movimento."
# define MSG_PART_RELEASE "Rilascio Parziale"
# define MSG_KILLED "UCCISO. "
# define MSG_STOPPED "ARRESTATO. "
# define MSG_STEPPER_RELEASED "Rilasciato."
# define MSG_CONTROL_RETRACT " Ritrai mm:"
# define MSG_CONTROL_RETRACTF " Ritrai F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Salta mm:"
# define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " UnRet F:"
# define MSG_AUTORETRACT " AutoRilascio.:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Qualcosa non va in MenuStructure."
// Serial Console Messages
# define MSG_Enqueing "accodamento \""
# define MSG_POWERUP "Accensione"
# define MSG_EXTERNAL_RESET " Reset Esterno"
# define MSG_BROWNOUT_RESET " Brown out Reset"
# define MSG_WATCHDOG_RESET " Watchdog Reset"
# define MSG_SOFTWARE_RESET " Software Reset"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Autore: "
# define MSG_CONFIGURATION_VER " Ultimo Aggiornamento: "
# define MSG_FREE_MEMORY " Memoria Libera: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "File Salvato."
# define MSG_ERR_LINE_NO "Il Numero della Linea non corrisponde al Numero dell'Ultima Linea+1, Ultima Linea:"
# define MSG_ERR_CHECKSUM_MISMATCH "checksum non corrispondente, Ultima Linea:"
# define MSG_ERR_NO_CHECKSUM "Nessun Checksum con Numero di Linea, Ultima Linea:"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nessun Numero di Linea con Checksum, Ultima Linea:"
# define MSG_FILE_PRINTED "File stampato"
# define MSG_BEGIN_FILE_LIST "Inizio Lista File"
# define MSG_END_FILE_LIST "Fine Lista File"
# define MSG_M104_INVALID_EXTRUDER "M104 Estrusore non valido "
# define MSG_M105_INVALID_EXTRUDER "M105 Estrusore non valido "
# define MSG_ERR_NO_THERMISTORS "Nessun Termistore - nessuna temperatura"
# define MSG_M109_INVALID_EXTRUDER "M109 Estrusore non valido "
# define MSG_HEATING "Riscaldamento..."
# define MSG_HEATING_COMPLETE "Riscaldamento concluso."
# define MSG_BED_HEATING "Riscaldamento Piatto."
# define MSG_BED_DONE "Piatto Pronto."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Calcola X:"
# define MSG_ERR_KILLED "Stampante Calda. kill() chiamata !!"
# define MSG_ERR_STOPPED "Stampante fermata a causa di errori. Risolvi l'errore e usa M999 per ripartire!. (Reset temperatura. Impostala prima di ripartire)"
# define MSG_RESEND "Reinviato:"
# define MSG_UNKNOWN_COMMAND "Comando sconosciuto:\""
# define MSG_ACTIVE_EXTRUDER "Attiva Estrusore: "
# define MSG_INVALID_EXTRUDER "Estrusore non valido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Segnalazione stato degli endstop"
# define MSG_ENDSTOP_HIT "INNESCATO"
# define MSG_ENDSTOP_OPEN "aperto"
# define MSG_SD_CANT_OPEN_SUBDIR "Impossibile aprire sottocartella"
# define MSG_SD_INIT_FAIL "Fallita Inizializzazione SD"
# define MSG_SD_VOL_INIT_FAIL "Fallito il montaggio del Volume"
# define MSG_SD_OPENROOT_FAIL "Fallita l'apertura Cartella Principale"
# define MSG_SD_CARD_OK "SD card ok"
# define MSG_SD_WORKDIR_FAIL "Fallita l'apertura Cartella di Lavoro"
# define MSG_SD_OPEN_FILE_FAIL "Fallita l'apertura del File: "
# define MSG_SD_FILE_OPENED "File aperto:"
# define MSG_SD_SIZE " Dimensione:"
# define MSG_SD_FILE_SELECTED "File selezionato"
# define MSG_SD_WRITE_TO_FILE "Scrittura su file: "
# define MSG_SD_PRINTING_BYTE "Si sta scrivendo il byte su SD "
# define MSG_SD_NOT_PRINTING "Non si sta scrivendo su SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Errore nella scrittura su file"
# define MSG_SD_CANT_ENTER_SUBDIR "Impossibile entrare nella sottocartella:"
# define MSG_STEPPER_TO_HIGH "Steprate troppo alto : "
# define MSG_ENDSTOPS_HIT "Raggiunto il fondo carrello: "
# define MSG_ERR_COLD_EXTRUDE_STOP " prevenuta estrusione fredda"
# define MSG_ERR_LONG_EXTRUDE_STOP " prevenuta estrusione troppo lunga"
# endif
# if LANGUAGE_CHOICE == 8
// LCD Menu Messages
# define WELCOME_MSG MACHINE_NAME " Pronta."
# define MSG_SD_INSERTED "Cartao SD inserido"
# define MSG_SD_REMOVED "Cartao SD removido"
# define MSG_MAIN " Menu Principal \003"
# define MSG_AUTOSTART " Autostart"
# define MSG_DISABLE_STEPPERS " Apagar Motores"
# define MSG_AUTO_HOME " Ir para Origen"
# define MSG_SET_ORIGIN " Estabelecer Origen"
# define MSG_PREHEAT_PLA " pre-aquecer PLA"
# define MSG_PREHEAT_PLA_SETTINGS " pre-aquecer PLA Setting"
# define MSG_PREHEAT_ABS " pre-aquecer ABS"
# define MSG_PREHEAT_ABS_SETTINGS " pre-aquecer ABS Setting"
# define MSG_COOLDOWN " Esfriar"
# define MSG_EXTRUDE " Extrudar"
# define MSG_RETRACT " Retrair"
# define MSG_PREHEAT_PLA " pre-aquecer PLA"
# define MSG_PREHEAT_ABS " pre-aquecer ABS"
# define MSG_MOVE_AXIS " Mover eixo \x7E"
# define MSG_SPEED " Velocidade:"
# define MSG_NOZZLE " \002Nozzle:"
# define MSG_NOZZLE1 " \002Nozzle2:"
# define MSG_NOZZLE2 " \002Nozzle3:"
# define MSG_BED " \002Base:"
# define MSG_FAN_SPEED " Velocidade Ventoinha:"
# define MSG_FLOW " Fluxo:"
# define MSG_CONTROL " Controle \003"
# define MSG_MIN " \002 Min:"
# define MSG_MAX " \002 Max:"
# define MSG_FACTOR " \002 Fact:"
# define MSG_AUTOTEMP " Autotemp:"
# define MSG_ON "On "
# define MSG_OFF "Off"
# define MSG_PID_P " PID-P: "
# define MSG_PID_I " PID-I: "
# define MSG_PID_D " PID-D: "
# define MSG_PID_C " PID-C: "
# define MSG_ACC " Acc:"
# define MSG_VXY_JERK " Vxy-jerk: "
# define MSG_VMAX " Vmax "
# define MSG_X "x:"
# define MSG_Y "y:"
# define MSG_Z "z:"
# define MSG_E "e:"
# define MSG_VMIN " Vmin:"
# define MSG_VTRAV_MIN " VTrav min:"
# define MSG_AMAX " Amax "
# define MSG_A_RETRACT " A-retract:"
# define MSG_XSTEPS " Xpasso / mm:"
# define MSG_YSTEPS " Ypasso / mm:"
# define MSG_ZSTEPS " Zpasso / mm:"
# define MSG_ESTEPS " Epasso / mm:"
# define MSG_MAIN_WIDE " Menu Principal \003"
# define MSG_RECTRACT_WIDE " Retrair \x7E"
# define MSG_TEMPERATURE_WIDE " Temperatura \x7E"
# define MSG_TEMPERATURE_RTN " Temperatura \003"
# define MSG_MOTION_WIDE " Movimento \x7E"
# define MSG_STORE_EPROM " Guardar memoria"
# define MSG_LOAD_EPROM " Carregar memoria"
# define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
# define MSG_REFRESH "\004Recarregar"
# define MSG_WATCH " Monitorar \003"
# define MSG_PREPARE " Preparar \x7E"
# define MSG_PREPARE_ALT " Preparar \003"
# define MSG_CONTROL_ARROW " Controle \x7E"
# define MSG_RETRACT_ARROW " Retrair \x7E"
# define MSG_TUNE " Tune \x7E"
# define MSG_PAUSE_PRINT " Pausar Impressao \x7E"
# define MSG_RESUME_PRINT " Resumir Impressao \x7E"
# define MSG_STOP_PRINT " Parar Impressao \x7E"
# define MSG_CARD_MENU " Menu cartao SD \x7E"
# define MSG_NO_CARD " Sem cartao SD"
# define MSG_DWELL "Repouso..."
# define MSG_USERWAIT "Esperando Ordem..."
# define MSG_NO_MOVE "Sem movimento."
# define MSG_PART_RELEASE "Lancamento Parcial"
# define MSG_KILLED "PARADA DE EMERGENCIA. "
# define MSG_STOPPED "PARADA. "
# define MSG_STEPPER_RELEASED "Lancado."
# define MSG_CONTROL_RETRACT " Retrair mm:"
# define MSG_CONTROL_RETRACTF " Retrair F:"
# define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
# define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
# define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
# define MSG_AUTORETRACT " AutoRetr.:"
# define MSG_SERIAL_ERROR_MENU_STRUCTURE "Algo esta errado na estrutura do Menu."
// Serial Console Messages
# define MSG_Enqueing "enqueing \""
# define MSG_POWERUP "PowerUp"
# define MSG_EXTERNAL_RESET " Reset Externo"
# define MSG_BROWNOUT_RESET " Reset por voltagem incorreta"
# define MSG_WATCHDOG_RESET " Reset por Bloqueio"
# define MSG_SOFTWARE_RESET " Reset por Software"
# define MSG_MARLIN "Marlin "
# define MSG_AUTHOR " | Author: "
# define MSG_CONFIGURATION_VER " Ultima atualizacao: "
# define MSG_FREE_MEMORY " memoria Livre: "
# define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
# define MSG_OK "ok"
# define MSG_FILE_SAVED "Guardado."
# define MSG_ERR_LINE_NO "O Numero da linha Nao e igual ao ultimo Numero da linha+1, Ultima linha:"
# define MSG_ERR_CHECKSUM_MISMATCH "O checksum Nao coincide, Ultima linha:"
# define MSG_ERR_NO_CHECKSUM "Nao foi possivel encontrar o checksum com o numero da linha, Ultima linha :"
# define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "Nao ha o numero da linha com o checksum, Ultima linha:"
# define MSG_FILE_PRINTED "Impressao terminada"
# define MSG_BEGIN_FILE_LIST "Começo da lista de arquivos"
# define MSG_END_FILE_LIST "Fim da lista de arquivos"
# define MSG_M104_INVALID_EXTRUDER "M104 Extrusor inválido "
# define MSG_M105_INVALID_EXTRUDER "M105 Extrusor inválido "
# define MSG_ERR_NO_THERMISTORS "Nao ha termistor - no temp"
# define MSG_M109_INVALID_EXTRUDER "M109 Extrusor inválido "
# define MSG_HEATING "Aquecendo..."
# define MSG_HEATING_COMPLETE "Aquecido."
# define MSG_BED_HEATING "Aquecendo a Base."
# define MSG_BED_DONE "Base quente."
# define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter / grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
# define MSG_COUNT_X " Conta X:"
# define MSG_ERR_KILLED "Impressora parada com kill() !!"
# define MSG_ERR_STOPPED "Impressora parada por erros. Coserte o erro e use M999 para recomeçar!. (Temperatura reiniciada. Ajuste antes de recomeçar)"
# define MSG_RESEND "Reenviar:"
# define MSG_UNKNOWN_COMMAND "Comando desconhecido:\""
# define MSG_ACTIVE_EXTRUDER "Extrusor ativo: "
# define MSG_INVALID_EXTRUDER "Extrusor invalido"
# define MSG_X_MIN "x_min: "
# define MSG_X_MAX "x_max: "
# define MSG_Y_MIN "y_min: "
# define MSG_Y_MAX "y_max: "
# define MSG_Z_MIN "z_min: "
# define MSG_Z_MAX "z_max: "
# define MSG_M119_REPORT "Relatando estado do ponto final"
# define MSG_ENDSTOP_HIT "PULSADO"
# define MSG_ENDSTOP_OPEN "Aberto"
# define MSG_SD_CANT_OPEN_SUBDIR "Nao pode abrir sub diretorio"
# define MSG_SD_INIT_FAIL "Falha ao iniciar SD"
# define MSG_SD_VOL_INIT_FAIL "Falha ao montar volume"
# define MSG_SD_OPENROOT_FAIL "Falha ao abrir diretorio raiz"
# define MSG_SD_CARD_OK "cartao SD ok"
# define MSG_SD_WORKDIR_FAIL "Falha ao abrir diretorio de trabalho"
# define MSG_SD_OPEN_FILE_FAIL "Erro ao abrir, Arquivo: "
# define MSG_SD_FILE_OPENED "Arquivo aberto:"
# define MSG_SD_SIZE " Size:"
# define MSG_SD_FILE_SELECTED "Arquivo selecionado"
# define MSG_SD_WRITE_TO_FILE "Escrevendo no arquivo: "
# define MSG_SD_PRINTING_BYTE "SD imprimindo o byte "
# define MSG_SD_NOT_PRINTING "Nao esta se imprimindo com o SD"
# define MSG_SD_ERR_WRITE_TO_FILE "Erro ao escrever no arquivo"
# define MSG_SD_CANT_ENTER_SUBDIR "Nao pode abrir o sub diretorio:"
# define MSG_STEPPER_TO_HIGH "Steprate muito alto : "
# define MSG_ENDSTOPS_HIT "O ponto final foi tocado: "
# define MSG_ERR_COLD_EXTRUDE_STOP " Extrusao a frio evitada"
# define MSG_ERR_LONG_EXTRUDE_STOP " Extrusao muito larga evitada"
# endif
# endif // ifndef LANGUAGE_H
