add MINIPANEL defines

Marlin/Conditionals.h

@@ -75,6 +75,14 @@
     #define NEWPANEL
   #endif
 
+  #ifdef MINIPANEL
+   #define DOGLCD
+   #define SDSUPPORT
+   #define ULTIPANEL
+   #define NEWPANEL
+   #define DEFAULT_LCD_CONTRAST 17
+  #endif
+
   /**
    * I2C PANELS
    */

Marlin/Configuration.h

@@ -694,6 +694,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
  * I2C Panels
  */

Marlin/dogm_lcd_implementation.h

@@ -128,6 +128,9 @@
 #elif defined U8GLIB_SSD1306
   // Generic support for SSD1306 OLED I2C LCDs
   U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);
+#elif defined(MINIPANEL)
+  // The MINIPanel display
+  U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
 #else
   // for regular DOGM128 display with HW-SPI
   U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0
@@ -201,8 +204,9 @@ static void lcd_implementation_init() {
     pinMode(LCD_PIN_RESET, OUTPUT);           
     digitalWrite(LCD_PIN_RESET, HIGH);
   #endif
-
-  u8g.setContrast(lcd_contrast);	
+  #ifndef MINIPANEL//setContrast not working for Mini Panel
+    u8g.setContrast(lcd_contrast);	
+  #endif
 	// FIXME: remove this workaround
   // Uncomment this if you have the first generation (V1.10) of STBs board
   // pinMode(17, OUTPUT);	// Enable LCD backlight

Marlin/example_configurations/SCARA/Configuration.h

@@ -702,6 +702,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
  * I2C Panels
  */

Marlin/example_configurations/delta/generic/Configuration.h

@@ -821,6 +821,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 // in ultralcd.cpp@lcd_delta_calibrate_menu()
 // #define DELTA_CALIBRATION_MENU
 
+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
  * I2C Panels
  */

Marlin/pins_RAMPS_13.h

@@ -191,6 +191,27 @@
       #define DOGLCD_CS 29
       #define DOGLCD_A0 27
       #define LCD_PIN_BL 33
+    #elif defined(MINIPANEL)
+       #define BEEPER 42
+       // Pins for DOGM SPI LCD Support
+       #define DOGLCD_A0  44
+       #define DOGLCD_CS  66
+       #define LCD_PIN_BL	65	// backlight LED on A11/D65
+       #define SDSS   53
+       
+       #define KILL_PIN 64
+       // GLCD features
+       //#define LCD_CONTRAST 190
+       // Uncomment screen orientation
+         // #define LCD_SCREEN_ROT_90
+         // #define LCD_SCREEN_ROT_180
+         // #define LCD_SCREEN_ROT_270
+       //The encoder and click button
+       #define BTN_EN1 40
+       #define BTN_EN2 63
+       #define BTN_ENC 59  //the click switch
+       //not connected to a pin
+       #define SDCARDDETECT 49
     #else
       // arduino pin which triggers an piezzo beeper
       #define BEEPER 33  // Beeper on AUX-4