diff --git a/Marlin/Conditionals_LulzBot.h b/Marlin/Conditionals_LulzBot.h
index 62bcc1ef1..92134414e 100644
--- a/Marlin/Conditionals_LulzBot.h
+++ b/Marlin/Conditionals_LulzBot.h
@@ -37,7 +37,7 @@
     #error Must specify model and toolhead. Please see "Configuration_LulzBot.h" for directions.
 #endif
 
-#define LULZBOT_FW_VERSION ".18"
+#define LULZBOT_FW_VERSION ".19"
 
 // Select options based on printer model
 
@@ -354,6 +354,7 @@
      * confusing to users.
      */
     #define LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD
+    #define LULZBOT_HIDE_PID_CONFIG_IN_LCD
 #endif
 
 /*********************************************** COMMON TOOLHEADS PARAMETERS *****************************/
@@ -465,7 +466,7 @@
 #if defined(TOOLHEAD_Javelin_DualExtruder) || defined(TOOLHEAD_Longfin_FlexyDually) || defined(TOOLHEAD_Yellowfin_DualExtruder)
     #define LULZBOT_TOOLHEAD_VER               VERSION_STRING" Dual"
     #define LULZBOT_BUILD_VARIANT              " LulzBot Dual"
-    #define LULZBOT_SWAP_FAN_PINS_6_AND_8      // For backwards compatibility
+    #define LULZBOT_EXTRUDER_FAN_ON_PIN_6      // For backwards compatibility with TAZ 4
     #define DIGIPOT_MOTOR_CURRENT_E            160, 160  // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
     #define LULZBOT_EXTRUDERS                  2
     #define LULZBOT_UUID                       "c5077702-4ecd-4532-beaf-6acf94acc404"
@@ -705,12 +706,6 @@
 #define LULZBOT_BED_PROBE_MIN   -3 // Limit on pushing into the bed
 #define LULZBOT_BED_PROBE_FAIL  -2 // At what point is a failure detected
 
-#if defined(LULZBOT_USE_LCD_DISPLAY)
-    #define LULZBOT_STOP_JOB_CMD card.stopSDPrint();
-#else
-    #define LULZBOT_STOP_JOB_CMD
-#endif
-
 #define LULZBOT_PROBE_Z_WITH_REWIPE(speed) \
     do_probe_move(LULZBOT_BED_PROBE_MIN, speed); /* probe; if we reach limit, the probe failed */ \
     for(int rewipes = 1; current_position[Z_AXIS] < LULZBOT_BED_PROBE_FAIL; rewipes++) { \
@@ -726,9 +721,8 @@
             BUZZ(25, 880); BUZZ(50, 0); \
             BUZZ(25, 880); BUZZ(50, 0); \
             do_blocking_move_to_z(100, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); /* raise head */ \
-            LULZBOT_STOP_JOB_CMD;                     /* stop print job */ \
-            clear_command_queue(); \
-            print_job_timer.stop(); \
+            stop();                                   /* stop print job */ \
+            LCD_MESSAGEPGM(MSG_LEVEL_FAIL);           /* stop changes the message... */ \
             return NAN;                               /* abort the leveling in progress */ \
         } \
     }
diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h
index 0022572df..8e5185532 100644
--- a/Marlin/pins_RAMBO.h
+++ b/Marlin/pins_RAMBO.h
@@ -126,12 +126,12 @@
 #define HEATER_2_PIN        6
 #define HEATER_BED_PIN      3
 
-#ifdef LULZBOT_SWAP_FAN_PINS_6_AND_8
+#if defined(LULZBOT_EXTRUDER_FAN_ON_PIN_6)
   #define FAN_PIN           6
-  #define FAN1_PIN          8
+  //#define FAN1_PIN          8
 #else
   #define FAN_PIN           8
-  #define FAN1_PIN          6
+  //#define FAN1_PIN          6
 #endif
 #define FAN2_PIN            2
 
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 59ad78398..2803ae616 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -2793,7 +2793,9 @@ void kill_screen(const char* lcd_msg) {
 
     MENU_ITEM(submenu, MSG_MOVE_E, lcd_move_get_e_amount);
     #if E_MANUAL > 1
+      #if not defined(LULZBOT_HIDE_ACTIVE_NOZZLE_IN_LCD)
       MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E1, lcd_move_get_e0_amount);
+      #endif
       MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E2, lcd_move_get_e1_amount);
       #if E_MANUAL > 2
         MENU_ITEM(submenu, MSG_MOVE_E MSG_MOVE_E3, lcd_move_get_e2_amount);
@@ -3018,7 +3020,7 @@ void kill_screen(const char* lcd_msg) {
     // PID-P E4, PID-I E4, PID-D E4, PID-C E4, PID Autotune E4
     // PID-P E5, PID-I E5, PID-D E5, PID-C E5, PID Autotune E5
     //
-    #if ENABLED(PIDTEMP)
+    #if ENABLED(PIDTEMP) && not defined(LULZBOT_HIDE_PID_CONFIG_IN_LCD)
 
       #define _PID_BASE_MENU_ITEMS(ELABEL, eindex) \
         raw_Ki = unscalePID_i(PID_PARAM(Ki, eindex)); \