Unify run_z_probe

Unify run_z_probe
Add double touch for DELTAs.
Introduce Z_PROBE_SPEED_FAST and Z_PROBE_SPEED_SLOW
  defaulting to homing_feedrate_mm_m[Z_AXIS] and homing_feedrate_mm_m[Z_AXIS]/2
master
AnHardt 8 years ago committed by Scott Lahteine
parent e6e4d4062d
commit 09a3cc33e6

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -1584,7 +1584,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
/**
* Some planner shorthand inline functions
*/
inline float set_homing_bump_feedrate(AxisEnum axis) {
inline float get_homing_bump_feedrate(AxisEnum axis) {
const int homing_bump_divisor[] = HOMING_BUMP_DIVISOR;
int hbd = homing_bump_divisor[axis];
if (hbd < 1) {
@ -1592,8 +1592,7 @@ inline float set_homing_bump_feedrate(AxisEnum axis) {
SERIAL_ECHO_START;
SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1");
}
feedrate_mm_m = homing_feedrate_mm_m[axis] / hbd;
return feedrate_mm_m;
return homing_feedrate_mm_m[axis] / hbd;
}
//
// line_to_current_position
@ -1613,7 +1612,7 @@ inline void line_to_axis_pos(AxisEnum axis, float where, float fr_mm_m = 0.0) {
current_position[axis] = where;
feedrate_mm_m = (fr_mm_m != 0.0) ? fr_mm_m : homing_feedrate_mm_m[axis];
planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], MMM_TO_MMS(feedrate_mm_m), active_extruder);
stepper.synchronize(); // The lost one
stepper.synchronize();
feedrate_mm_m = old_feedrate_mm_m;
}
@ -2061,85 +2060,35 @@ static void clean_up_after_endstop_or_probe_move() {
// at the height where the probe triggered.
static float run_z_probe() {
float old_feedrate_mm_m = feedrate_mm_m;
// Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
refresh_cmd_timeout();
#if ENABLED(DELTA)
float start_z = current_position[Z_AXIS];
long start_steps = stepper.position(Z_AXIS);
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe (DELTA) 1", current_position);
#endif
// move down slowly until you find the bed
feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS] / 4;
destination[Z_AXIS] = -10;
prepare_move_to_destination_raw(); // this will also set_current_to_destination
stepper.synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
/**
* We have to let the planner know where we are right now as it
* is not where we said to go.
*/
long stop_steps = stepper.position(Z_AXIS);
float mm = start_z - float(start_steps - stop_steps) / planner.axis_steps_per_mm[Z_AXIS];
current_position[Z_AXIS] = mm;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe (DELTA) 2", current_position);
#endif
#else // !DELTA
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
planner.bed_level_matrix.set_to_identity();
#endif
feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS];
// Move down until the Z probe (or endstop?) is triggered
float zPosition = -(Z_MAX_LENGTH + 10);
line_to_z(zPosition);
stepper.synchronize();
// Tell the planner where we ended up - Get this from the stepper handler
zPosition = stepper.get_axis_position_mm(Z_AXIS);
planner.set_position_mm(
current_position[X_AXIS], current_position[Y_AXIS], zPosition,
current_position[E_AXIS]
);
// move up the retract distance
zPosition += home_bump_mm(Z_AXIS);
line_to_z(zPosition);
stepper.synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
// move back down slowly to find bed
set_homing_bump_feedrate(Z_AXIS);
zPosition -= home_bump_mm(Z_AXIS) * 2;
line_to_z(zPosition);
stepper.synchronize();
endstops.hit_on_purpose(); // clear endstop hit flags
// Get the current stepper position after bumping an endstop
current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
planner.bed_level_matrix.set_to_identity();
#endif
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe", current_position);
#endif
current_position[Z_AXIS] = -(Z_MAX_LENGTH + 10);
do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_FAST);
endstops.hit_on_purpose(); // clear endstop hit flags
// Get the current stepper position after bumping an endstop
current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
SYNC_PLAN_POSITION_KINEMATIC(); // tell the planner where we are feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS];
#endif // !DELTA
// move up the retract distance
current_position[Z_AXIS] += home_bump_mm(Z_AXIS);
do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_FAST);
SYNC_PLAN_POSITION_KINEMATIC();
// move back down slowly to find bed
current_position[Z_AXIS] -= home_bump_mm(Z_AXIS) * 2;
do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_SLOW);
endstops.hit_on_purpose(); // clear endstop hit flags
// Get the current stepper position after bumping an endstop
current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
SYNC_PLAN_POSITION_KINEMATIC(); // tell the planner where we are
feedrate_mm_m = old_feedrate_mm_m;
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe", current_position);
#endif
return current_position[Z_AXIS];
}
@ -2424,7 +2373,7 @@ static void homeaxis(AxisEnum axis) {
line_to_axis_pos(axis, -home_bump_mm(axis) * axis_home_dir);
// Move slowly towards the endstop until triggered
line_to_axis_pos(axis, 2 * home_bump_mm(axis) * axis_home_dir, set_homing_bump_feedrate(axis));
line_to_axis_pos(axis, 2 * home_bump_mm(axis) * axis_home_dir, get_homing_bump_feedrate(axis));
#if ENABLED(DEBUG_LEVELING_FEATURE)
if (DEBUGGING(LEVELING)) DEBUG_POS("> TRIGGER ENDSTOP", current_position);

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -481,6 +481,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -479,6 +479,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -491,6 +491,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -493,6 +493,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -516,6 +516,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -496,6 +496,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -507,6 +507,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -520,6 +520,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -491,6 +491,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -499,6 +499,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -541,6 +541,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 4000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

@ -541,6 +541,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 4000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

@ -541,6 +541,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 4000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

@ -532,6 +532,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

@ -539,6 +539,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
// Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
// Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.

@ -502,6 +502,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

@ -489,6 +489,10 @@
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
// Speed for the first approach when probing
#define Z_PROBE_SPEED_FAST (homing_feedrate_mm_m[Z_AXIS])
// Speed for the second approach when probing
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
//
// Allen Key Probe is defined in the Delta example configurations.

Loading…
Cancel
Save