Merge MegaController & MINIPANEL (PR#2508)

9 years ago · 0a7f2a8be7
parent a0120a533c 932f1c109e
commit 0a7f2a8be7
19 changed files with 202 additions and 2 deletions
--- a/Marlin/Conditionals.h
+++ b/Marlin/Conditionals.h
@ -75,6 +75,14 @@
    #define NEWPANEL
  #endif

+  #ifdef MINIPANEL
+   #define DOGLCD
+   #define SDSUPPORT
+   #define ULTIPANEL
+   #define NEWPANEL
+   #define DEFAULT_LCD_CONTRAST 17
+  #endif
+
  /**
   * I2C PANELS
   */
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -694,6 +694,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/boards.h
+++ b/Marlin/boards.h
@ -49,6 +49,7 @@
 #define BOARD_OMCA              91   // Final OMCA board
 #define BOARD_RAMBO             301  // Rambo
 #define BOARD_MINIRAMBO         302  // Mini-Rambo
+#define BOARD_MEGACONTROLLER    310  // Mega controller
 #define BOARD_ELEFU_3           21   // Elefu Ra Board (v3)
 #define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
 #define BOARD_LEAPFROG          999  // Leapfrog
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@ -694,6 +694,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@ -128,6 +128,9 @@
 #elif defined U8GLIB_SSD1306
  // Generic support for SSD1306 OLED I2C LCDs
  U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);
+#elif defined(MINIPANEL)
+  // The MINIPanel display
+  U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
 #else
  // for regular DOGM128 display with HW-SPI
  U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);  // HW-SPI Com: CS, A0
@ -201,8 +204,9 @@ static void lcd_implementation_init() {
    pinMode(LCD_PIN_RESET, OUTPUT);           
    digitalWrite(LCD_PIN_RESET, HIGH);
  #endif
-
-  u8g.setContrast(lcd_contrast);	
+  #ifndef MINIPANEL//setContrast not working for Mini Panel
+    u8g.setContrast(lcd_contrast);	
+  #endif
 	// FIXME: remove this workaround
  // Uncomment this if you have the first generation (V1.10) of STBs board
  // pinMode(17, OUTPUT);	// Enable LCD backlight
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -677,6 +677,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/Felix/Configuration_DUAL.h
+++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h
@ -638,6 +638,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -686,6 +686,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@ -682,6 +682,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -694,6 +694,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -702,6 +702,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -686,6 +686,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -694,6 +694,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -821,6 +821,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 // in ultralcd.cpp@lcd_delta_calibrate_menu()
 // #define DELTA_CALIBRATION_MENU

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -697,6 +697,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -688,6 +688,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic
 // REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL

+// The MakerLab Mini Panel with graphic controller and SD support
+// http://reprap.org/wiki/Mini_panel
+// #define MINIPANEL
+
 /**
 * I2C Panels
 */
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@ -118,6 +118,8 @@
  #include "pins_MKS_BASE.h"
 #elif MB(RIGIDBOARD)
  #include "pins_RIGIDBOARD.h"
+#elif MB(MEGACONTROLLER)
+  #include "pins_MEGACONTROLLER.h"
 #elif MB(99)
  #include "pins_99.h"
 #else
--- a/Marlin/pins_MEGACONTROLLER.h
+++ b/Marlin/pins_MEGACONTROLLER.h
@ -0,0 +1,112 @@
+/**
+ * Mega controller pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+  #error Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
+#endif
+
+#if EXTRUDERS > 2
+  #error Mega Controller supports up to 2 extruders. Comment this line to keep going.
+#endif
+
+#ifdef NUM_SERVOS
+   #define SERVO0_PIN         30
+   #if NUM_SERVOS > 1
+     #define SERVO1_PIN       31
+     #if NUM_SERVOS > 2
+       #define SERVO2_PIN     32
+       #if NUM_SERVOS > 3
+         #define SERVO3_PIN   33
+       #endif
+     #endif
+   #endif
+#endif // NUM_SERVOS
+
+#define X_STEP_PIN 62//A8
+#define X_DIR_PIN 63//A9
+#define X_ENABLE_PIN 61//A7
+#define X_MIN_PIN 43
+#define X_MAX_PIN 42 //Max endstops default to disabled "-1", set to commented value to enable.
+
+#define Y_STEP_PIN 65 // A11
+#define Y_DIR_PIN 66 // A12
+#define Y_ENABLE_PIN 64//A10
+#define Y_MIN_PIN 38
+#define Y_MAX_PIN 41 
+
+#define Z_STEP_PIN 68 // A14
+#define Z_DIR_PIN 69 // A15
+#define Z_ENABLE_PIN 67 // A13
+#define Z_MIN_PIN 40
+#define Z_MAX_PIN 37
+
+#define E0_STEP_PIN 23
+#define E0_DIR_PIN 24
+#define E0_ENABLE_PIN 22
+
+#define E1_STEP_PIN 26
+#define E1_DIR_PIN 27
+#define E1_ENABLE_PIN 25
+
+#define SDPOWER -1
+#define SDSS 53
+#define LED_PIN 13
+
+#define FAN_PIN 39
+#define FAN1_PIN 35
+#define FAN2_PIN 36
+#define FAN_SOFT_PWM
+#define CONTROLLERFAN_PIN 36
+#define PS_ON_PIN -1
+#define KILL_PIN -1
+
+#define HEATER_0_PIN 29 // EXTRUDER 1
+#define HEATER_1_PIN 34 // EXTRUDER 2
+#define HEATER_2_PIN -1
+
+#if TEMP_SENSOR_0 == -1
+  #define TEMP_0_PIN 4 // ANALOG NUMBERING
+#else
+  #define TEMP_0_PIN 0 // ANALOG NUMBERING
+#endif
+
+
+#if TEMP_SENSOR_1 == -1
+  #define TEMP_1_PIN 5 // ANALOG NUMBERING
+#else
+  #define TEMP_1_PIN 2 // ANALOG NUMBERING
+#endif
+
+#define TEMP_2_PIN 3 // ANALOG NUMBERING
+
+#define HEATER_BED_PIN 28 // BED
+
+#if TEMP_SENSOR_BED == -1
+  #define TEMP_BED_PIN 6 // ANALOG NUMBERING
+#else
+  #define TEMP_BED_PIN 1 // ANALOG NUMBERING
+#endif
+
+#ifdef MINIPANEL
+    #define BEEPER 46
+    // Pins for DOGM SPI LCD Support
+    #define DOGLCD_A0  47
+    #define DOGLCD_CS  45
+    #define LCD_PIN_BL 44  // backlight LED on PA3
+    
+    #define KILL_PIN 12
+    // GLCD features
+    //#define LCD_CONTRAST 190
+    // Uncomment screen orientation
+      // #define LCD_SCREEN_ROT_90
+      // #define LCD_SCREEN_ROT_180
+      // #define LCD_SCREEN_ROT_270
+    //The encoder and click button
+    #define BTN_EN1 48
+    #define BTN_EN2 11
+    #define BTN_ENC 10  //the click switch
+    //not connected to a pin
+    #define SDCARDDETECT 49
+#endif //Minipanel
+
--- a/Marlin/pins_RAMPS_13.h
+++ b/Marlin/pins_RAMPS_13.h
@ -191,6 +191,27 @@
      #define DOGLCD_CS 29
      #define DOGLCD_A0 27
      #define LCD_PIN_BL 33
+    #elif defined(MINIPANEL)
+       #define BEEPER 42
+       // Pins for DOGM SPI LCD Support
+       #define DOGLCD_A0  44
+       #define DOGLCD_CS  66
+       #define LCD_PIN_BL	65	// backlight LED on A11/D65
+       #define SDSS   53
+       
+       #define KILL_PIN 64
+       // GLCD features
+       //#define LCD_CONTRAST 190
+       // Uncomment screen orientation
+         // #define LCD_SCREEN_ROT_90
+         // #define LCD_SCREEN_ROT_180
+         // #define LCD_SCREEN_ROT_270
+       //The encoder and click button
+       #define BTN_EN1 40
+       #define BTN_EN2 63
+       #define BTN_ENC 59  //the click switch
+       //not connected to a pin
+       #define SDCARDDETECT 49
    #else
      // arduino pin which triggers an piezzo beeper
      #define BEEPER 33  // Beeper on AUX-4