Robert F-C
11 years ago
commit
0d4a9444c4
@ -0,0 +1,339 @@
|
||||
/*
|
||||
Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
|
||||
Copyright (c) 2009 Michael Margolis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
|
||||
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
|
||||
The servos are pulsed in the background using the value most recently written using the write() method
|
||||
|
||||
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
|
||||
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
|
||||
|
||||
The methods are:
|
||||
|
||||
Servo - Class for manipulating servo motors connected to Arduino pins.
|
||||
|
||||
attach(pin ) - Attaches a servo motor to an i/o pin.
|
||||
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
|
||||
default min is 544, max is 2400
|
||||
|
||||
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
|
||||
writeMicroseconds() - Sets the servo pulse width in microseconds
|
||||
read() - Gets the last written servo pulse width as an angle between 0 and 180.
|
||||
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
|
||||
attached() - Returns true if there is a servo attached.
|
||||
detach() - Stops an attached servos from pulsing its i/o pin.
|
||||
|
||||
*/
|
||||
#ifdef NUM_SERVOS
|
||||
#include <avr/interrupt.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
#include "Servo.h"
|
||||
|
||||
#define usToTicks(_us) (( clockCyclesPerMicrosecond()* _us) / 8) // converts microseconds to tick (assumes prescale of 8) // 12 Aug 2009
|
||||
#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds
|
||||
|
||||
|
||||
#define TRIM_DURATION 2 // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009
|
||||
|
||||
//#define NBR_TIMERS (MAX_SERVOS / SERVOS_PER_TIMER)
|
||||
|
||||
static servo_t servos[MAX_SERVOS]; // static array of servo structures
|
||||
static volatile int8_t Channel[_Nbr_16timers ]; // counter for the servo being pulsed for each timer (or -1 if refresh interval)
|
||||
|
||||
uint8_t ServoCount = 0; // the total number of attached servos
|
||||
|
||||
|
||||
// convenience macros
|
||||
#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / SERVOS_PER_TIMER)) // returns the timer controlling this servo
|
||||
#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % SERVOS_PER_TIMER) // returns the index of the servo on this timer
|
||||
#define SERVO_INDEX(_timer,_channel) ((_timer*SERVOS_PER_TIMER) + _channel) // macro to access servo index by timer and channel
|
||||
#define SERVO(_timer,_channel) (servos[SERVO_INDEX(_timer,_channel)]) // macro to access servo class by timer and channel
|
||||
|
||||
#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4) // minimum value in uS for this servo
|
||||
#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4) // maximum value in uS for this servo
|
||||
|
||||
/************ static functions common to all instances ***********************/
|
||||
|
||||
static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t *TCNTn, volatile uint16_t* OCRnA)
|
||||
{
|
||||
if( Channel[timer] < 0 )
|
||||
*TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
|
||||
else{
|
||||
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && SERVO(timer,Channel[timer]).Pin.isActive == true )
|
||||
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,LOW); // pulse this channel low if activated
|
||||
}
|
||||
|
||||
Channel[timer]++; // increment to the next channel
|
||||
if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
|
||||
*OCRnA = *TCNTn + SERVO(timer,Channel[timer]).ticks;
|
||||
if(SERVO(timer,Channel[timer]).Pin.isActive == true) // check if activated
|
||||
digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,HIGH); // its an active channel so pulse it high
|
||||
}
|
||||
else {
|
||||
// finished all channels so wait for the refresh period to expire before starting over
|
||||
if( ((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL) ) // allow a few ticks to ensure the next OCR1A not missed
|
||||
*OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL);
|
||||
else
|
||||
*OCRnA = *TCNTn + 4; // at least REFRESH_INTERVAL has elapsed
|
||||
Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
|
||||
}
|
||||
}
|
||||
|
||||
#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
|
||||
// Interrupt handlers for Arduino
|
||||
#if defined(_useTimer1)
|
||||
SIGNAL (TIMER1_COMPA_vect)
|
||||
{
|
||||
handle_interrupts(_timer1, &TCNT1, &OCR1A);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(_useTimer3)
|
||||
SIGNAL (TIMER3_COMPA_vect)
|
||||
{
|
||||
handle_interrupts(_timer3, &TCNT3, &OCR3A);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(_useTimer4)
|
||||
SIGNAL (TIMER4_COMPA_vect)
|
||||
{
|
||||
handle_interrupts(_timer4, &TCNT4, &OCR4A);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(_useTimer5)
|
||||
SIGNAL (TIMER5_COMPA_vect)
|
||||
{
|
||||
handle_interrupts(_timer5, &TCNT5, &OCR5A);
|
||||
}
|
||||
#endif
|
||||
|
||||
#elif defined WIRING
|
||||
// Interrupt handlers for Wiring
|
||||
#if defined(_useTimer1)
|
||||
void Timer1Service()
|
||||
{
|
||||
handle_interrupts(_timer1, &TCNT1, &OCR1A);
|
||||
}
|
||||
#endif
|
||||
#if defined(_useTimer3)
|
||||
void Timer3Service()
|
||||
{
|
||||
handle_interrupts(_timer3, &TCNT3, &OCR3A);
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
||||
static void initISR(timer16_Sequence_t timer)
|
||||
{
|
||||
#if defined (_useTimer1)
|
||||
if(timer == _timer1) {
|
||||
TCCR1A = 0; // normal counting mode
|
||||
TCCR1B = _BV(CS11); // set prescaler of 8
|
||||
TCNT1 = 0; // clear the timer count
|
||||
#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
|
||||
TIFR |= _BV(OCF1A); // clear any pending interrupts;
|
||||
TIMSK |= _BV(OCIE1A) ; // enable the output compare interrupt
|
||||
#else
|
||||
// here if not ATmega8 or ATmega128
|
||||
TIFR1 |= _BV(OCF1A); // clear any pending interrupts;
|
||||
TIMSK1 |= _BV(OCIE1A) ; // enable the output compare interrupt
|
||||
#endif
|
||||
#if defined(WIRING)
|
||||
timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined (_useTimer3)
|
||||
if(timer == _timer3) {
|
||||
TCCR3A = 0; // normal counting mode
|
||||
TCCR3B = _BV(CS31); // set prescaler of 8
|
||||
TCNT3 = 0; // clear the timer count
|
||||
#if defined(__AVR_ATmega128__)
|
||||
TIFR |= _BV(OCF3A); // clear any pending interrupts;
|
||||
ETIMSK |= _BV(OCIE3A); // enable the output compare interrupt
|
||||
#else
|
||||
TIFR3 = _BV(OCF3A); // clear any pending interrupts;
|
||||
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
|
||||
#endif
|
||||
#if defined(WIRING)
|
||||
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined (_useTimer4)
|
||||
if(timer == _timer4) {
|
||||
TCCR4A = 0; // normal counting mode
|
||||
TCCR4B = _BV(CS41); // set prescaler of 8
|
||||
TCNT4 = 0; // clear the timer count
|
||||
TIFR4 = _BV(OCF4A); // clear any pending interrupts;
|
||||
TIMSK4 = _BV(OCIE4A) ; // enable the output compare interrupt
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined (_useTimer5)
|
||||
if(timer == _timer5) {
|
||||
TCCR5A = 0; // normal counting mode
|
||||
TCCR5B = _BV(CS51); // set prescaler of 8
|
||||
TCNT5 = 0; // clear the timer count
|
||||
TIFR5 = _BV(OCF5A); // clear any pending interrupts;
|
||||
TIMSK5 = _BV(OCIE5A) ; // enable the output compare interrupt
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
static void finISR(timer16_Sequence_t timer)
|
||||
{
|
||||
//disable use of the given timer
|
||||
#if defined WIRING // Wiring
|
||||
if(timer == _timer1) {
|
||||
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
|
||||
TIMSK1 &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
|
||||
#else
|
||||
TIMSK &= ~_BV(OCIE1A) ; // disable timer 1 output compare interrupt
|
||||
#endif
|
||||
timerDetach(TIMER1OUTCOMPAREA_INT);
|
||||
}
|
||||
else if(timer == _timer3) {
|
||||
#if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
|
||||
TIMSK3 &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
|
||||
#else
|
||||
ETIMSK &= ~_BV(OCIE3A); // disable the timer3 output compare A interrupt
|
||||
#endif
|
||||
timerDetach(TIMER3OUTCOMPAREA_INT);
|
||||
}
|
||||
#else
|
||||
//For arduino - in future: call here to a currently undefined function to reset the timer
|
||||
#endif
|
||||
}
|
||||
|
||||
static boolean isTimerActive(timer16_Sequence_t timer)
|
||||
{
|
||||
// returns true if any servo is active on this timer
|
||||
for(uint8_t channel=0; channel < SERVOS_PER_TIMER; channel++) {
|
||||
if(SERVO(timer,channel).Pin.isActive == true)
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
|
||||
/****************** end of static functions ******************************/
|
||||
|
||||
Servo::Servo()
|
||||
{
|
||||
if( ServoCount < MAX_SERVOS) {
|
||||
this->servoIndex = ServoCount++; // assign a servo index to this instance
|
||||
servos[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH); // store default values - 12 Aug 2009
|
||||
}
|
||||
else
|
||||
this->servoIndex = INVALID_SERVO ; // too many servos
|
||||
}
|
||||
|
||||
uint8_t Servo::attach(int pin)
|
||||
{
|
||||
return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
|
||||
}
|
||||
|
||||
uint8_t Servo::attach(int pin, int min, int max)
|
||||
{
|
||||
if(this->servoIndex < MAX_SERVOS ) {
|
||||
pinMode( pin, OUTPUT) ; // set servo pin to output
|
||||
servos[this->servoIndex].Pin.nbr = pin;
|
||||
// todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128
|
||||
this->min = (MIN_PULSE_WIDTH - min)/4; //resolution of min/max is 4 uS
|
||||
this->max = (MAX_PULSE_WIDTH - max)/4;
|
||||
// initialize the timer if it has not already been initialized
|
||||
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
|
||||
if(isTimerActive(timer) == false)
|
||||
initISR(timer);
|
||||
servos[this->servoIndex].Pin.isActive = true; // this must be set after the check for isTimerActive
|
||||
}
|
||||
return this->servoIndex ;
|
||||
}
|
||||
|
||||
void Servo::detach()
|
||||
{
|
||||
servos[this->servoIndex].Pin.isActive = false;
|
||||
timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
|
||||
if(isTimerActive(timer) == false) {
|
||||
finISR(timer);
|
||||
}
|
||||
}
|
||||
|
||||
void Servo::write(int value)
|
||||
{
|
||||
if(value < MIN_PULSE_WIDTH)
|
||||
{ // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
|
||||
if(value < 0) value = 0;
|
||||
if(value > 180) value = 180;
|
||||
value = map(value, 0, 180, SERVO_MIN(), SERVO_MAX());
|
||||
}
|
||||
this->writeMicroseconds(value);
|
||||
}
|
||||
|
||||
void Servo::writeMicroseconds(int value)
|
||||
{
|
||||
// calculate and store the values for the given channel
|
||||
byte channel = this->servoIndex;
|
||||
if( (channel < MAX_SERVOS) ) // ensure channel is valid
|
||||
{
|
||||
if( value < SERVO_MIN() ) // ensure pulse width is valid
|
||||
value = SERVO_MIN();
|
||||
else if( value > SERVO_MAX() )
|
||||
value = SERVO_MAX();
|
||||
|
||||
value = value - TRIM_DURATION;
|
||||
value = usToTicks(value); // convert to ticks after compensating for interrupt overhead - 12 Aug 2009
|
||||
|
||||
uint8_t oldSREG = SREG;
|
||||
cli();
|
||||
servos[channel].ticks = value;
|
||||
SREG = oldSREG;
|
||||
}
|
||||
}
|
||||
|
||||
int Servo::read() // return the value as degrees
|
||||
{
|
||||
return map( this->readMicroseconds()+1, SERVO_MIN(), SERVO_MAX(), 0, 180);
|
||||
}
|
||||
|
||||
int Servo::readMicroseconds()
|
||||
{
|
||||
unsigned int pulsewidth;
|
||||
if( this->servoIndex != INVALID_SERVO )
|
||||
pulsewidth = ticksToUs(servos[this->servoIndex].ticks) + TRIM_DURATION ; // 12 aug 2009
|
||||
else
|
||||
pulsewidth = 0;
|
||||
|
||||
return pulsewidth;
|
||||
}
|
||||
|
||||
bool Servo::attached()
|
||||
{
|
||||
return servos[this->servoIndex].Pin.isActive ;
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -0,0 +1,132 @@
|
||||
/*
|
||||
Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
|
||||
Copyright (c) 2009 Michael Margolis. All right reserved.
|
||||
|
||||
This library is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU Lesser General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2.1 of the License, or (at your option) any later version.
|
||||
|
||||
This library is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||||
Lesser General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU Lesser General Public
|
||||
License along with this library; if not, write to the Free Software
|
||||
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
/*
|
||||
|
||||
A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
|
||||
The servos are pulsed in the background using the value most recently written using the write() method
|
||||
|
||||
Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
|
||||
Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
|
||||
The sequence used to sieze timers is defined in timers.h
|
||||
|
||||
The methods are:
|
||||
|
||||
Servo - Class for manipulating servo motors connected to Arduino pins.
|
||||
|
||||
attach(pin ) - Attaches a servo motor to an i/o pin.
|
||||
attach(pin, min, max ) - Attaches to a pin setting min and max values in microseconds
|
||||
default min is 544, max is 2400
|
||||
|
||||
write() - Sets the servo angle in degrees. (invalid angle that is valid as pulse in microseconds is treated as microseconds)
|
||||
writeMicroseconds() - Sets the servo pulse width in microseconds
|
||||
read() - Gets the last written servo pulse width as an angle between 0 and 180.
|
||||
readMicroseconds() - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
|
||||
attached() - Returns true if there is a servo attached.
|
||||
detach() - Stops an attached servos from pulsing its i/o pin.
|
||||
*/
|
||||
|
||||
#ifndef Servo_h
|
||||
#define Servo_h
|
||||
|
||||
#include <inttypes.h>
|
||||
|
||||
/*
|
||||
* Defines for 16 bit timers used with Servo library
|
||||
*
|
||||
* If _useTimerX is defined then TimerX is a 16 bit timer on the curent board
|
||||
* timer16_Sequence_t enumerates the sequence that the timers should be allocated
|
||||
* _Nbr_16timers indicates how many 16 bit timers are available.
|
||||
*
|
||||
*/
|
||||
|
||||
// Say which 16 bit timers can be used and in what order
|
||||
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||
#define _useTimer5
|
||||
//#define _useTimer1
|
||||
#define _useTimer3
|
||||
#define _useTimer4
|
||||
//typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
|
||||
typedef enum { _timer5, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
|
||||
|
||||
#elif defined(__AVR_ATmega32U4__)
|
||||
//#define _useTimer1
|
||||
#define _useTimer3
|
||||
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
||||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
|
||||
|
||||
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
||||
#define _useTimer3
|
||||
//#define _useTimer1
|
||||
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
||||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
|
||||
|
||||
#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
|
||||
#define _useTimer3
|
||||
//#define _useTimer1
|
||||
//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
||||
typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
|
||||
|
||||
#else // everything else
|
||||
//#define _useTimer1
|
||||
//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
|
||||
typedef enum { _Nbr_16timers } timer16_Sequence_t ;
|
||||
#endif
|
||||
|
||||
#define Servo_VERSION 2 // software version of this library
|
||||
|
||||
#define MIN_PULSE_WIDTH 544 // the shortest pulse sent to a servo
|
||||
#define MAX_PULSE_WIDTH 2400 // the longest pulse sent to a servo
|
||||
#define DEFAULT_PULSE_WIDTH 1500 // default pulse width when servo is attached
|
||||
#define REFRESH_INTERVAL 20000 // minumim time to refresh servos in microseconds
|
||||
|
||||
#define SERVOS_PER_TIMER 12 // the maximum number of servos controlled by one timer
|
||||
#define MAX_SERVOS (_Nbr_16timers * SERVOS_PER_TIMER)
|
||||
|
||||
#define INVALID_SERVO 255 // flag indicating an invalid servo index
|
||||
|
||||
typedef struct {
|
||||
uint8_t nbr :6 ; // a pin number from 0 to 63
|
||||
uint8_t isActive :1 ; // true if this channel is enabled, pin not pulsed if false
|
||||
} ServoPin_t ;
|
||||
|
||||
typedef struct {
|
||||
ServoPin_t Pin;
|
||||
unsigned int ticks;
|
||||
} servo_t;
|
||||
|
||||
class Servo
|
||||
{
|
||||
public:
|
||||
Servo();
|
||||
uint8_t attach(int pin); // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
|
||||
uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
|
||||
void detach();
|
||||
void write(int value); // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds
|
||||
void writeMicroseconds(int value); // Write pulse width in microseconds
|
||||
int read(); // returns current pulse width as an angle between 0 and 180 degrees
|
||||
int readMicroseconds(); // returns current pulse width in microseconds for this servo (was read_us() in first release)
|
||||
bool attached(); // return true if this servo is attached, otherwise false
|
||||
private:
|
||||
uint8_t servoIndex; // index into the channel data for this servo
|
||||
int8_t min; // minimum is this value times 4 added to MIN_PULSE_WIDTH
|
||||
int8_t max; // maximum is this value times 4 added to MAX_PULSE_WIDTH
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -1,515 +1,748 @@
|
||||
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
|
||||
/**
|
||||
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
||||
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
||||
**/
|
||||
|
||||
#if LANGUAGE_CHOICE == 6
|
||||
#include "LiquidCrystalRus.h"
|
||||
#define LCD_CLASS LiquidCrystalRus
|
||||
#else
|
||||
#include <LiquidCrystal.h>
|
||||
#define LCD_CLASS LiquidCrystal
|
||||
#endif
|
||||
|
||||
/* Custom characters defined in the first 8 characters of the LCD */
|
||||
#define LCD_STR_BEDTEMP "\x00"
|
||||
#define LCD_STR_DEGREE "\x01"
|
||||
#define LCD_STR_THERMOMETER "\x02"
|
||||
#define LCD_STR_UPLEVEL "\x03"
|
||||
#define LCD_STR_REFRESH "\x04"
|
||||
#define LCD_STR_FOLDER "\x05"
|
||||
#define LCD_STR_FEEDRATE "\x06"
|
||||
#define LCD_STR_CLOCK "\x07"
|
||||
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
||||
|
||||
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||
static void lcd_implementation_init()
|
||||
{
|
||||
byte bedTemp[8] =
|
||||
{
|
||||
B00000,
|
||||
B11111,
|
||||
B10101,
|
||||
B10001,
|
||||
B10101,
|
||||
B11111,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
byte degree[8] =
|
||||
{
|
||||
B01100,
|
||||
B10010,
|
||||
B10010,
|
||||
B01100,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000
|
||||
};
|
||||
byte thermometer[8] =
|
||||
{
|
||||
B00100,
|
||||
B01010,
|
||||
B01010,
|
||||
B01010,
|
||||
B01010,
|
||||
B10001,
|
||||
B10001,
|
||||
B01110
|
||||
};
|
||||
byte uplevel[8]={
|
||||
B00100,
|
||||
B01110,
|
||||
B11111,
|
||||
B00100,
|
||||
B11100,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks joris
|
||||
byte refresh[8]={
|
||||
B00000,
|
||||
B00110,
|
||||
B11001,
|
||||
B11000,
|
||||
B00011,
|
||||
B10011,
|
||||
B01100,
|
||||
B00000,
|
||||
}; //thanks joris
|
||||
byte folder [8]={
|
||||
B00000,
|
||||
B11100,
|
||||
B11111,
|
||||
B10001,
|
||||
B10001,
|
||||
B11111,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks joris
|
||||
byte feedrate [8]={
|
||||
B11100,
|
||||
B10000,
|
||||
B11000,
|
||||
B10111,
|
||||
B00101,
|
||||
B00110,
|
||||
B00101,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
byte clock [8]={
|
||||
B00000,
|
||||
B01110,
|
||||
B10011,
|
||||
B10101,
|
||||
B10001,
|
||||
B01110,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
||||
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
||||
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
||||
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
||||
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
||||
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
||||
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
||||
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
||||
lcd.clear();
|
||||
}
|
||||
static void lcd_implementation_clear()
|
||||
{
|
||||
lcd.clear();
|
||||
}
|
||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||
static void lcd_printPGM(const char* str)
|
||||
{
|
||||
char c;
|
||||
while((c = pgm_read_byte(str++)) != '\0')
|
||||
{
|
||||
lcd.write(c);
|
||||
}
|
||||
}
|
||||
/*
|
||||
Possible status screens:
|
||||
16x2 |0123456789012345|
|
||||
|000/000 B000/000|
|
||||
|Status line.....|
|
||||
|
||||
16x4 |0123456789012345|
|
||||
|000/000 B000/000|
|
||||
|SD100% Z000.0|
|
||||
|F100% T--:--|
|
||||
|Status line.....|
|
||||
|
||||
20x2 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|Status line.........|
|
||||
|
||||
20x4 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|X+000.0 Y+000.0 Z+000.0|
|
||||
|F100% SD100% T--:--|
|
||||
|Status line.........|
|
||||
|
||||
20x4 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|T000/000D Z000.0|
|
||||
|F100% SD100% T--:--|
|
||||
|Status line.........|
|
||||
*/
|
||||
static void lcd_implementation_status_screen()
|
||||
{
|
||||
int tHotend=int(degHotend(0) + 0.5);
|
||||
int tTarget=int(degTargetHotend(0) + 0.5);
|
||||
|
||||
#if LCD_WIDTH < 20
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
|
||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||
lcd.setCursor(8, 0);
|
||||
# if EXTRUDERS > 1
|
||||
tHotend = int(degHotend(1) + 0.5);
|
||||
tTarget = int(degTargetHotend(1) + 0.5);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
# else//Heated bed
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
# endif
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
|
||||
#else//LCD_WIDTH > 19
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
|
||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||
lcd.setCursor(10, 0);
|
||||
# if EXTRUDERS > 1
|
||||
tHotend = int(degHotend(1) + 0.5);
|
||||
tTarget = int(degTargetHotend(1) + 0.5);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
# else//Heated bed
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
# endif
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
#endif//LCD_WIDTH > 19
|
||||
|
||||
#if LCD_HEIGHT > 2
|
||||
//Lines 2 for 4 line LCD
|
||||
# if LCD_WIDTH < 20
|
||||
# ifdef SDSUPPORT
|
||||
lcd.setCursor(0, 2);
|
||||
lcd_printPGM(PSTR("SD"));
|
||||
if (IS_SD_PRINTING)
|
||||
lcd.print(itostr3(card.percentDone()));
|
||||
else
|
||||
lcd_printPGM(PSTR("---"));
|
||||
lcd.print('%');
|
||||
# endif//SDSUPPORT
|
||||
# else//LCD_WIDTH > 19
|
||||
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
||||
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
|
||||
lcd.setCursor(0, 1);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
# else
|
||||
lcd.setCursor(0,1);
|
||||
lcd.print('X');
|
||||
lcd.print(ftostr3(current_position[X_AXIS]));
|
||||
lcd_printPGM(PSTR(" Y"));
|
||||
lcd.print(ftostr3(current_position[Y_AXIS]));
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
# endif//LCD_WIDTH > 19
|
||||
lcd.setCursor(LCD_WIDTH - 8, 1);
|
||||
lcd.print('Z');
|
||||
lcd.print(ftostr32(current_position[Z_AXIS]));
|
||||
#endif//LCD_HEIGHT > 2
|
||||
|
||||
#if LCD_HEIGHT > 3
|
||||
lcd.setCursor(0, 2);
|
||||
lcd.print(LCD_STR_FEEDRATE[0]);
|
||||
lcd.print(itostr3(feedmultiply));
|
||||
lcd.print('%');
|
||||
# if LCD_WIDTH > 19
|
||||
# ifdef SDSUPPORT
|
||||
lcd.setCursor(7, 2);
|
||||
lcd_printPGM(PSTR("SD"));
|
||||
if (IS_SD_PRINTING)
|
||||
lcd.print(itostr3(card.percentDone()));
|
||||
else
|
||||
lcd_printPGM(PSTR("---"));
|
||||
lcd.print('%');
|
||||
# endif//SDSUPPORT
|
||||
# endif//LCD_WIDTH > 19
|
||||
lcd.setCursor(LCD_WIDTH - 6, 2);
|
||||
lcd.print(LCD_STR_CLOCK[0]);
|
||||
if(starttime != 0)
|
||||
{
|
||||
uint16_t time = millis()/60000 - starttime/60000;
|
||||
lcd.print(itostr2(time/60));
|
||||
lcd.print(':');
|
||||
lcd.print(itostr2(time%60));
|
||||
}else{
|
||||
lcd_printPGM(PSTR("--:--"));
|
||||
}
|
||||
#endif
|
||||
|
||||
//Status message line on the last line
|
||||
lcd.setCursor(0, LCD_HEIGHT - 1);
|
||||
lcd.print(lcd_status_message);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1;
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd.print(post_char);
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd.print(data);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd_printPGM(data);
|
||||
}
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
//Add version for callback functions
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||
{
|
||||
lcd.setCursor(1, 1);
|
||||
lcd_printPGM(pstr);
|
||||
lcd.print(':');
|
||||
#if LCD_WIDTH < 20
|
||||
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
||||
#else
|
||||
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
||||
#endif
|
||||
lcd.print(value);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
|
||||
static void lcd_implementation_quick_feedback()
|
||||
{
|
||||
#if BEEPER > -1
|
||||
SET_OUTPUT(BEEPER);
|
||||
for(int8_t i=0;i<10;i++)
|
||||
{
|
||||
WRITE(BEEPER,HIGH);
|
||||
delay(3);
|
||||
WRITE(BEEPER,LOW);
|
||||
delay(3);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
#ifndef ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
#define ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
|
||||
/**
|
||||
* Implementation of the LCD display routines for a hitachi HD44780 display. These are common LCD character displays.
|
||||
* When selecting the rusian language, a slightly different LCD implementation is used to handle UTF8 characters.
|
||||
**/
|
||||
|
||||
#ifndef REPRAPWORLD_KEYPAD
|
||||
extern volatile uint8_t buttons; //the last checked buttons in a bit array.
|
||||
#else
|
||||
extern volatile uint16_t buttons; //an extended version of the last checked buttons in a bit array.
|
||||
#endif
|
||||
|
||||
////////////////////////////////////
|
||||
// Setup button and encode mappings for each panel (into 'buttons' variable)
|
||||
//
|
||||
// This is just to map common functions (across different panels) onto the same
|
||||
// macro name. The mapping is independent of whether the button is directly connected or
|
||||
// via a shift/i2c register.
|
||||
|
||||
#ifdef ULTIPANEL
|
||||
// All Ultipanels might have an encoder - so this is always be mapped onto first two bits
|
||||
#define BLEN_B 1
|
||||
#define BLEN_A 0
|
||||
|
||||
#define EN_B (1<<BLEN_B) // The two encoder pins are connected through BTN_EN1 and BTN_EN2
|
||||
#define EN_A (1<<BLEN_A)
|
||||
|
||||
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||
// encoder click is directly connected
|
||||
#define BLEN_C 2
|
||||
#define EN_C (1<<BLEN_C)
|
||||
#endif
|
||||
|
||||
//
|
||||
// Setup other button mappings of each panel
|
||||
//
|
||||
#if defined(LCD_I2C_VIKI)
|
||||
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||
|
||||
// button and encoder bit positions within 'buttons'
|
||||
#define B_LE (BUTTON_LEFT<<B_I2C_BTN_OFFSET) // The remaining normalized buttons are all read via I2C
|
||||
#define B_UP (BUTTON_UP<<B_I2C_BTN_OFFSET)
|
||||
#define B_MI (BUTTON_SELECT<<B_I2C_BTN_OFFSET)
|
||||
#define B_DW (BUTTON_DOWN<<B_I2C_BTN_OFFSET)
|
||||
#define B_RI (BUTTON_RIGHT<<B_I2C_BTN_OFFSET)
|
||||
|
||||
#if defined(BTN_ENC) && BTN_ENC > -1
|
||||
// the pause/stop/restart button is connected to BTN_ENC when used
|
||||
#define B_ST (EN_C) // Map the pause/stop/resume button into its normalized functional name
|
||||
#define LCD_CLICKED (buttons&(B_MI|B_RI|B_ST)) // pause/stop button also acts as click until we implement proper pause/stop.
|
||||
#else
|
||||
#define LCD_CLICKED (buttons&(B_MI|B_RI))
|
||||
#endif
|
||||
|
||||
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||
#define LCD_HAS_SLOW_BUTTONS
|
||||
|
||||
#elif defined(LCD_I2C_PANELOLU2)
|
||||
// encoder click can be read through I2C if not directly connected
|
||||
#if BTN_ENC <= 0
|
||||
#define B_I2C_BTN_OFFSET 3 // (the first three bit positions reserved for EN_A, EN_B, EN_C)
|
||||
|
||||
#define B_MI (PANELOLU2_ENCODER_C<<B_I2C_BTN_OFFSET) // requires LiquidTWI2 library v1.2.3 or later
|
||||
|
||||
#define LCD_CLICKED (buttons&B_MI)
|
||||
|
||||
// I2C buttons take too long to read inside an interrupt context and so we read them during lcd_update
|
||||
#define LCD_HAS_SLOW_BUTTONS
|
||||
#else
|
||||
#define LCD_CLICKED (buttons&EN_C)
|
||||
#endif
|
||||
|
||||
#elif defined(REPRAPWORLD_KEYPAD)
|
||||
// define register bit values, don't change it
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_F3 0
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_F2 1
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_F1 2
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_UP 3
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_RIGHT 4
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_MIDDLE 5
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_DOWN 6
|
||||
#define BLEN_REPRAPWORLD_KEYPAD_LEFT 7
|
||||
|
||||
#define REPRAPWORLD_BTN_OFFSET 3 // bit offset into buttons for shift register values
|
||||
|
||||
#define EN_REPRAPWORLD_KEYPAD_F3 (1<<(BLEN_REPRAPWORLD_KEYPAD_F3+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_F2 (1<<(BLEN_REPRAPWORLD_KEYPAD_F2+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_F1 (1<<(BLEN_REPRAPWORLD_KEYPAD_F1+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_UP (1<<(BLEN_REPRAPWORLD_KEYPAD_UP+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_RIGHT (1<<(BLEN_REPRAPWORLD_KEYPAD_RIGHT+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_MIDDLE (1<<(BLEN_REPRAPWORLD_KEYPAD_MIDDLE+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_DOWN (1<<(BLEN_REPRAPWORLD_KEYPAD_DOWN+REPRAPWORLD_BTN_OFFSET))
|
||||
#define EN_REPRAPWORLD_KEYPAD_LEFT (1<<(BLEN_REPRAPWORLD_KEYPAD_LEFT+REPRAPWORLD_BTN_OFFSET))
|
||||
|
||||
#define LCD_CLICKED ((buttons&EN_C) || (buttons&EN_REPRAPWORLD_KEYPAD_F1))
|
||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_DOWN (buttons&EN_REPRAPWORLD_KEYPAD_DOWN)
|
||||
#define REPRAPWORLD_KEYPAD_MOVE_Y_UP (buttons&EN_REPRAPWORLD_KEYPAD_UP)
|
||||
#define REPRAPWORLD_KEYPAD_MOVE_HOME (buttons&EN_REPRAPWORLD_KEYPAD_MIDDLE)
|
||||
|
||||
#elif defined(NEWPANEL)
|
||||
#define LCD_CLICKED (buttons&EN_C)
|
||||
|
||||
#else // old style ULTIPANEL
|
||||
//bits in the shift register that carry the buttons for:
|
||||
// left up center down right red(stop)
|
||||
#define BL_LE 7
|
||||
#define BL_UP 6
|
||||
#define BL_MI 5
|
||||
#define BL_DW 4
|
||||
#define BL_RI 3
|
||||
#define BL_ST 2
|
||||
|
||||
//automatic, do not change
|
||||
#define B_LE (1<<BL_LE)
|
||||
#define B_UP (1<<BL_UP)
|
||||
#define B_MI (1<<BL_MI)
|
||||
#define B_DW (1<<BL_DW)
|
||||
#define B_RI (1<<BL_RI)
|
||||
#define B_ST (1<<BL_ST)
|
||||
|
||||
#define LCD_CLICKED (buttons&(B_MI|B_ST))
|
||||
#endif
|
||||
|
||||
////////////////////////
|
||||
// Setup Rotary Encoder Bit Values (for two pin encoders to indicate movement)
|
||||
// These values are independent of which pins are used for EN_A and EN_B indications
|
||||
// The rotary encoder part is also independent to the chipset used for the LCD
|
||||
#if defined(EN_A) && defined(EN_B)
|
||||
#ifndef ULTIMAKERCONTROLLER
|
||||
#define encrot0 0
|
||||
#define encrot1 2
|
||||
#define encrot2 3
|
||||
#define encrot3 1
|
||||
#else
|
||||
#define encrot0 0
|
||||
#define encrot1 1
|
||||
#define encrot2 3
|
||||
#define encrot3 2
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif //ULTIPANEL
|
||||
|
||||
////////////////////////////////////
|
||||
// Create LCD class instance and chipset-specific information
|
||||
#if defined(LCD_I2C_TYPE_PCF8575)
|
||||
// note: these are register mapped pins on the PCF8575 controller not Arduino pins
|
||||
#define LCD_I2C_PIN_BL 3
|
||||
#define LCD_I2C_PIN_EN 2
|
||||
#define LCD_I2C_PIN_RW 1
|
||||
#define LCD_I2C_PIN_RS 0
|
||||
#define LCD_I2C_PIN_D4 4
|
||||
#define LCD_I2C_PIN_D5 5
|
||||
#define LCD_I2C_PIN_D6 6
|
||||
#define LCD_I2C_PIN_D7 7
|
||||
|
||||
#include <Wire.h>
|
||||
#include <LCD.h>
|
||||
#include <LiquidCrystal_I2C.h>
|
||||
#define LCD_CLASS LiquidCrystal_I2C
|
||||
LCD_CLASS lcd(LCD_I2C_ADDRESS,LCD_I2C_PIN_EN,LCD_I2C_PIN_RW,LCD_I2C_PIN_RS,LCD_I2C_PIN_D4,LCD_I2C_PIN_D5,LCD_I2C_PIN_D6,LCD_I2C_PIN_D7);
|
||||
|
||||
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||
//for the LED indicators (which maybe mapped to different things in lcd_implementation_update_indicators())
|
||||
#define LED_A 0x04 //100
|
||||
#define LED_B 0x02 //010
|
||||
#define LED_C 0x01 //001
|
||||
|
||||
#define LCD_HAS_STATUS_INDICATORS
|
||||
|
||||
#include <Wire.h>
|
||||
#include <LiquidTWI2.h>
|
||||
#define LCD_CLASS LiquidTWI2
|
||||
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||
|
||||
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||
#include <Wire.h>
|
||||
#include <LiquidTWI2.h>
|
||||
#define LCD_CLASS LiquidTWI2
|
||||
LCD_CLASS lcd(LCD_I2C_ADDRESS);
|
||||
|
||||
#else
|
||||
// Standard directly connected LCD implementations
|
||||
#if LANGUAGE_CHOICE == 6
|
||||
#include "LiquidCrystalRus.h"
|
||||
#define LCD_CLASS LiquidCrystalRus
|
||||
#else
|
||||
#include <LiquidCrystal.h>
|
||||
#define LCD_CLASS LiquidCrystal
|
||||
#endif
|
||||
LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7); //RS,Enable,D4,D5,D6,D7
|
||||
#endif
|
||||
|
||||
/* Custom characters defined in the first 8 characters of the LCD */
|
||||
#define LCD_STR_BEDTEMP "\x00"
|
||||
#define LCD_STR_DEGREE "\x01"
|
||||
#define LCD_STR_THERMOMETER "\x02"
|
||||
#define LCD_STR_UPLEVEL "\x03"
|
||||
#define LCD_STR_REFRESH "\x04"
|
||||
#define LCD_STR_FOLDER "\x05"
|
||||
#define LCD_STR_FEEDRATE "\x06"
|
||||
#define LCD_STR_CLOCK "\x07"
|
||||
#define LCD_STR_ARROW_RIGHT "\x7E" /* from the default character set */
|
||||
|
||||
static void lcd_implementation_init()
|
||||
{
|
||||
byte bedTemp[8] =
|
||||
{
|
||||
B00000,
|
||||
B11111,
|
||||
B10101,
|
||||
B10001,
|
||||
B10101,
|
||||
B11111,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
byte degree[8] =
|
||||
{
|
||||
B01100,
|
||||
B10010,
|
||||
B10010,
|
||||
B01100,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000
|
||||
};
|
||||
byte thermometer[8] =
|
||||
{
|
||||
B00100,
|
||||
B01010,
|
||||
B01010,
|
||||
B01010,
|
||||
B01010,
|
||||
B10001,
|
||||
B10001,
|
||||
B01110
|
||||
};
|
||||
byte uplevel[8]={
|
||||
B00100,
|
||||
B01110,
|
||||
B11111,
|
||||
B00100,
|
||||
B11100,
|
||||
B00000,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks joris
|
||||
byte refresh[8]={
|
||||
B00000,
|
||||
B00110,
|
||||
B11001,
|
||||
B11000,
|
||||
B00011,
|
||||
B10011,
|
||||
B01100,
|
||||
B00000,
|
||||
}; //thanks joris
|
||||
byte folder [8]={
|
||||
B00000,
|
||||
B11100,
|
||||
B11111,
|
||||
B10001,
|
||||
B10001,
|
||||
B11111,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks joris
|
||||
byte feedrate [8]={
|
||||
B11100,
|
||||
B10000,
|
||||
B11000,
|
||||
B10111,
|
||||
B00101,
|
||||
B00110,
|
||||
B00101,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
byte clock [8]={
|
||||
B00000,
|
||||
B01110,
|
||||
B10011,
|
||||
B10101,
|
||||
B10001,
|
||||
B01110,
|
||||
B00000,
|
||||
B00000
|
||||
}; //thanks Sonny Mounicou
|
||||
|
||||
#if defined(LCDI2C_TYPE_PCF8575)
|
||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
#ifdef LCD_I2C_PIN_BL
|
||||
lcd.setBacklightPin(LCD_I2C_PIN_BL,POSITIVE);
|
||||
lcd.setBacklight(HIGH);
|
||||
#endif
|
||||
|
||||
#elif defined(LCD_I2C_TYPE_MCP23017)
|
||||
lcd.setMCPType(LTI_TYPE_MCP23017);
|
||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
lcd.setBacklight(0); //set all the LEDs off to begin with
|
||||
|
||||
#elif defined(LCD_I2C_TYPE_MCP23008)
|
||||
lcd.setMCPType(LTI_TYPE_MCP23008);
|
||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
|
||||
#else
|
||||
lcd.begin(LCD_WIDTH, LCD_HEIGHT);
|
||||
#endif
|
||||
|
||||
lcd.createChar(LCD_STR_BEDTEMP[0], bedTemp);
|
||||
lcd.createChar(LCD_STR_DEGREE[0], degree);
|
||||
lcd.createChar(LCD_STR_THERMOMETER[0], thermometer);
|
||||
lcd.createChar(LCD_STR_UPLEVEL[0], uplevel);
|
||||
lcd.createChar(LCD_STR_REFRESH[0], refresh);
|
||||
lcd.createChar(LCD_STR_FOLDER[0], folder);
|
||||
lcd.createChar(LCD_STR_FEEDRATE[0], feedrate);
|
||||
lcd.createChar(LCD_STR_CLOCK[0], clock);
|
||||
lcd.clear();
|
||||
}
|
||||
static void lcd_implementation_clear()
|
||||
{
|
||||
lcd.clear();
|
||||
}
|
||||
/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
|
||||
static void lcd_printPGM(const char* str)
|
||||
{
|
||||
char c;
|
||||
while((c = pgm_read_byte(str++)) != '\0')
|
||||
{
|
||||
lcd.write(c);
|
||||
}
|
||||
}
|
||||
/*
|
||||
Possible status screens:
|
||||
16x2 |0123456789012345|
|
||||
|000/000 B000/000|
|
||||
|Status line.....|
|
||||
|
||||
16x4 |0123456789012345|
|
||||
|000/000 B000/000|
|
||||
|SD100% Z000.0|
|
||||
|F100% T--:--|
|
||||
|Status line.....|
|
||||
|
||||
20x2 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|Status line.........|
|
||||
|
||||
20x4 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|X+000.0 Y+000.0 Z+000.0|
|
||||
|F100% SD100% T--:--|
|
||||
|Status line.........|
|
||||
|
||||
20x4 |01234567890123456789|
|
||||
|T000/000D B000/000D |
|
||||
|T000/000D Z000.0|
|
||||
|F100% SD100% T--:--|
|
||||
|Status line.........|
|
||||
*/
|
||||
static void lcd_implementation_status_screen()
|
||||
{
|
||||
int tHotend=int(degHotend(0) + 0.5);
|
||||
int tTarget=int(degTargetHotend(0) + 0.5);
|
||||
|
||||
#if LCD_WIDTH < 20
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
|
||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||
lcd.setCursor(8, 0);
|
||||
# if EXTRUDERS > 1
|
||||
tHotend = int(degHotend(1) + 0.5);
|
||||
tTarget = int(degTargetHotend(1) + 0.5);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
# else//Heated bed
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
# endif
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
|
||||
#else//LCD_WIDTH > 19
|
||||
lcd.setCursor(0, 0);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
|
||||
# if EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
//If we have an 2nd extruder or heated bed, show that in the top right corner
|
||||
lcd.setCursor(10, 0);
|
||||
# if EXTRUDERS > 1
|
||||
tHotend = int(degHotend(1) + 0.5);
|
||||
tTarget = int(degTargetHotend(1) + 0.5);
|
||||
lcd.print(LCD_STR_THERMOMETER[0]);
|
||||
# else//Heated bed
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
# endif
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
#endif//LCD_WIDTH > 19
|
||||
|
||||
#if LCD_HEIGHT > 2
|
||||
//Lines 2 for 4 line LCD
|
||||
# if LCD_WIDTH < 20
|
||||
# ifdef SDSUPPORT
|
||||
lcd.setCursor(0, 2);
|
||||
lcd_printPGM(PSTR("SD"));
|
||||
if (IS_SD_PRINTING)
|
||||
lcd.print(itostr3(card.percentDone()));
|
||||
else
|
||||
lcd_printPGM(PSTR("---"));
|
||||
lcd.print('%');
|
||||
# endif//SDSUPPORT
|
||||
# else//LCD_WIDTH > 19
|
||||
# if EXTRUDERS > 1 && TEMP_SENSOR_BED != 0
|
||||
//If we both have a 2nd extruder and a heated bed, show the heated bed temp on the 2nd line on the left, as the first line is filled with extruder temps
|
||||
tHotend=int(degBed() + 0.5);
|
||||
tTarget=int(degTargetBed() + 0.5);
|
||||
|
||||
lcd.setCursor(0, 1);
|
||||
lcd.print(LCD_STR_BEDTEMP[0]);
|
||||
lcd.print(itostr3(tHotend));
|
||||
lcd.print('/');
|
||||
lcd.print(itostr3left(tTarget));
|
||||
lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
|
||||
if (tTarget < 10)
|
||||
lcd.print(' ');
|
||||
# else
|
||||
lcd.setCursor(0,1);
|
||||
lcd.print('X');
|
||||
lcd.print(ftostr3(current_position[X_AXIS]));
|
||||
lcd_printPGM(PSTR(" Y"));
|
||||
lcd.print(ftostr3(current_position[Y_AXIS]));
|
||||
# endif//EXTRUDERS > 1 || TEMP_SENSOR_BED != 0
|
||||
# endif//LCD_WIDTH > 19
|
||||
lcd.setCursor(LCD_WIDTH - 8, 1);
|
||||
lcd.print('Z');
|
||||
lcd.print(ftostr32(current_position[Z_AXIS]));
|
||||
#endif//LCD_HEIGHT > 2
|
||||
|
||||
#if LCD_HEIGHT > 3
|
||||
lcd.setCursor(0, 2);
|
||||
lcd.print(LCD_STR_FEEDRATE[0]);
|
||||
lcd.print(itostr3(feedmultiply));
|
||||
lcd.print('%');
|
||||
# if LCD_WIDTH > 19
|
||||
# ifdef SDSUPPORT
|
||||
lcd.setCursor(7, 2);
|
||||
lcd_printPGM(PSTR("SD"));
|
||||
if (IS_SD_PRINTING)
|
||||
lcd.print(itostr3(card.percentDone()));
|
||||
else
|
||||
lcd_printPGM(PSTR("---"));
|
||||
lcd.print('%');
|
||||
# endif//SDSUPPORT
|
||||
# endif//LCD_WIDTH > 19
|
||||
lcd.setCursor(LCD_WIDTH - 6, 2);
|
||||
lcd.print(LCD_STR_CLOCK[0]);
|
||||
if(starttime != 0)
|
||||
{
|
||||
uint16_t time = millis()/60000 - starttime/60000;
|
||||
lcd.print(itostr2(time/60));
|
||||
lcd.print(':');
|
||||
lcd.print(itostr2(time%60));
|
||||
}else{
|
||||
lcd_printPGM(PSTR("--:--"));
|
||||
}
|
||||
#endif
|
||||
|
||||
//Status message line on the last line
|
||||
lcd.setCursor(0, LCD_HEIGHT - 1);
|
||||
lcd.print(lcd_status_message);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1;
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2;
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd.print(post_char);
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd.print(data);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
|
||||
{
|
||||
char c;
|
||||
//Use all characters in narrow LCDs
|
||||
#if LCD_WIDTH < 20
|
||||
uint8_t n = LCD_WIDTH - 1 - 1 - strlen_P(data);
|
||||
#else
|
||||
uint8_t n = LCD_WIDTH - 1 - 2 - strlen_P(data);
|
||||
#endif
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(pre_char);
|
||||
while((c = pgm_read_byte(pstr)) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
pstr++;
|
||||
n--;
|
||||
}
|
||||
lcd.print(':');
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
lcd_printPGM(data);
|
||||
}
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
//Add version for callback functions
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
|
||||
|
||||
|
||||
void lcd_implementation_drawedit(const char* pstr, char* value)
|
||||
{
|
||||
lcd.setCursor(1, 1);
|
||||
lcd_printPGM(pstr);
|
||||
lcd.print(':');
|
||||
#if LCD_WIDTH < 20
|
||||
lcd.setCursor(LCD_WIDTH - strlen(value), 1);
|
||||
#else
|
||||
lcd.setCursor(LCD_WIDTH -1 - strlen(value), 1);
|
||||
#endif
|
||||
lcd.print(value);
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 1;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-1] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print('>');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
|
||||
{
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
lcd.setCursor(0, row);
|
||||
lcd.print(' ');
|
||||
lcd.print(LCD_STR_FOLDER[0]);
|
||||
if (longFilename[0] != '\0')
|
||||
{
|
||||
filename = longFilename;
|
||||
longFilename[LCD_WIDTH-2] = '\0';
|
||||
}
|
||||
while((c = *filename) != '\0')
|
||||
{
|
||||
lcd.print(c);
|
||||
filename++;
|
||||
n--;
|
||||
}
|
||||
while(n--)
|
||||
lcd.print(' ');
|
||||
}
|
||||
#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
|
||||
#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
|
||||
#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
|
||||
#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
|
||||
|
||||
static void lcd_implementation_quick_feedback()
|
||||
{
|
||||
#ifdef LCD_USE_I2C_BUZZER
|
||||
lcd.buzz(60,1000/6);
|
||||
#elif defined(BEEPER) && BEEPER > -1
|
||||
SET_OUTPUT(BEEPER);
|
||||
for(int8_t i=0;i<10;i++)
|
||||
{
|
||||
WRITE(BEEPER,HIGH);
|
||||
delay(3);
|
||||
WRITE(BEEPER,LOW);
|
||||
delay(3);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
#ifdef LCD_HAS_STATUS_INDICATORS
|
||||
static void lcd_implementation_update_indicators()
|
||||
{
|
||||
#if defined(LCD_I2C_PANELOLU2) || defined(LCD_I2C_VIKI)
|
||||
//set the LEDS - referred to as backlights by the LiquidTWI2 library
|
||||
static uint8_t ledsprev = 0;
|
||||
uint8_t leds = 0;
|
||||
if (target_temperature_bed > 0) leds |= LED_A;
|
||||
if (target_temperature[0] > 0) leds |= LED_B;
|
||||
if (fanSpeed) leds |= LED_C;
|
||||
#if EXTRUDERS > 1
|
||||
if (target_temperature[1] > 0) leds |= LED_C;
|
||||
#endif
|
||||
if (leds != ledsprev) {
|
||||
lcd.setBacklight(leds);
|
||||
ledsprev = leds;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef LCD_HAS_SLOW_BUTTONS
|
||||
static uint8_t lcd_implementation_read_slow_buttons()
|
||||
{
|
||||
#ifdef LCD_I2C_TYPE_MCP23017
|
||||
// Reading these buttons this is likely to be too slow to call inside interrupt context
|
||||
// so they are called during normal lcd_update
|
||||
return lcd.readButtons() << B_I2C_BTN_OFFSET;
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif//ULTRA_LCD_IMPLEMENTATION_HITACHI_HD44780_H
|
||||
|
||||
Loading…
Reference in new issue