From 0da744b7b012d7890a2289bfa53147384a7f4078 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 24 Mar 2016 23:19:46 -0700 Subject: [PATCH] Further cleanup of comments, partial Doxygen-style Following up on #3231 --- Marlin/Conditionals.h | 4 +- Marlin/Configuration.h | 29 +++++-- Marlin/Configuration_adv.h | 12 ++- Marlin/Default_Version.h | 4 +- Marlin/M100_Free_Mem_Chk.cpp | 39 ++++----- Marlin/Marlin.h | 2 +- Marlin/Marlin.ino | 4 +- Marlin/MarlinSerial.cpp | 4 +- Marlin/MarlinSerial.h | 4 +- Marlin/Marlin_main.cpp | 10 +-- Marlin/SanityCheck.h | 2 +- Marlin/Sd2Card.cpp | 4 +- Marlin/Sd2Card.h | 4 +- Marlin/Sd2PinMap.h | 4 +- Marlin/SdBaseFile.cpp | 4 +- Marlin/SdBaseFile.h | 4 +- Marlin/SdFatConfig.h | 4 +- Marlin/SdFatStructs.h | 6 +- Marlin/SdFatUtil.cpp | 4 +- Marlin/SdFatUtil.h | 4 +- Marlin/SdFile.cpp | 4 +- Marlin/SdFile.h | 4 +- Marlin/SdInfo.h | 4 +- Marlin/SdVolume.cpp | 4 +- Marlin/SdVolume.h | 4 +- Marlin/blinkm.cpp | 4 +- Marlin/blinkm.h | 4 +- Marlin/boards.h | 2 +- Marlin/buzzer.cpp | 2 +- Marlin/buzzer.h | 2 +- Marlin/cardreader.cpp | 4 +- Marlin/cardreader.h | 2 +- Marlin/configuration_store.cpp | 4 +- Marlin/configuration_store.h | 2 +- Marlin/dac_mcp4728.cpp | 72 ++++++++-------- Marlin/dac_mcp4728.h | 4 +- Marlin/digipot_mcp4451.cpp | 2 +- Marlin/dogm_bitmaps.h | 4 +- Marlin/dogm_font_data_6x9_marlin.h | 4 +- Marlin/dogm_font_data_HD44780_C.h | 4 +- Marlin/dogm_font_data_HD44780_J.h | 4 +- Marlin/dogm_font_data_HD44780_W.h | 4 +- Marlin/dogm_font_data_ISO10646_1.h | 4 +- Marlin/dogm_font_data_ISO10646_5_Cyrillic.h | 4 +- Marlin/dogm_font_data_ISO10646_CN.h | 4 +- Marlin/dogm_font_data_ISO10646_Kana.h | 4 +- Marlin/dogm_font_data_Marlin_symbols.h | 4 +- Marlin/dogm_lcd_implementation.h | 2 +- .../Felix/Configuration.h | 29 +++++-- .../Felix/Configuration_DUAL.h | 29 +++++-- .../Felix/Configuration_adv.h | 12 ++- .../Hephestos/Configuration.h | 29 +++++-- .../Hephestos/Configuration_adv.h | 12 ++- .../Hephestos_2/Configuration.h | 29 +++++-- .../Hephestos_2/Configuration_adv.h | 12 ++- .../K8200/Configuration.h | 39 ++++++--- .../K8200/Configuration_adv.h | 13 ++- .../RepRapWorld/Megatronics/Configuration.h | 29 +++++-- .../RigidBot/Configuration.h | 29 +++++-- .../RigidBot/Configuration_adv.h | 12 ++- .../SCARA/Configuration.h | 29 +++++-- .../SCARA/Configuration_adv.h | 12 ++- .../TAZ4/Configuration.h | 29 +++++-- .../TAZ4/Configuration_adv.h | 12 ++- .../WITBOX/Configuration.h | 29 +++++-- .../WITBOX/Configuration_adv.h | 12 ++- .../adafruit/ST7565/Configuration.h | 29 +++++-- .../delta/biv2.5/Configuration.h | 29 +++++-- .../delta/biv2.5/Configuration_adv.h | 12 ++- .../delta/generic/Configuration.h | 29 +++++-- .../delta/generic/Configuration_adv.h | 12 ++- .../delta/kossel_mini/Configuration.h | 29 +++++-- .../delta/kossel_mini/Configuration_adv.h | 12 ++- .../delta/kossel_pro/Configuration.h | 37 ++++++--- .../delta/kossel_pro/Configuration_adv.h | 13 ++- .../delta/kossel_xl/Configuration.h | 29 +++++-- .../delta/kossel_xl/Configuration_adv.h | 12 ++- .../makibox/Configuration.h | 29 +++++-- .../makibox/Configuration_adv.h | 12 ++- .../tvrrug/Round2/Configuration.h | 29 +++++-- .../tvrrug/Round2/Configuration_adv.h | 12 ++- Marlin/fastio.h | 22 ++--- Marlin/language.h | 2 +- Marlin/language_an.h | 2 +- Marlin/language_bg.h | 2 +- Marlin/language_ca.h | 2 +- Marlin/language_cn.h | 2 +- Marlin/language_cz.h | 2 +- Marlin/language_da.h | 2 +- Marlin/language_de.h | 2 +- Marlin/language_en.h | 2 +- Marlin/language_es.h | 2 +- Marlin/language_eu.h | 2 +- Marlin/language_fi.h | 2 +- Marlin/language_fr.h | 2 +- Marlin/language_gl.h | 2 +- Marlin/language_it.h | 2 +- Marlin/language_kana.h | 2 +- Marlin/language_kana_utf8.h | 2 +- Marlin/language_nl.h | 2 +- Marlin/language_pl.h | 2 +- Marlin/language_pt-br.h | 2 +- Marlin/language_pt-br_utf8.h | 2 +- Marlin/language_pt.h | 2 +- Marlin/language_pt_utf8.h | 2 +- Marlin/language_ru.h | 2 +- Marlin/language_test.h | 2 +- Marlin/macros.h | 2 +- Marlin/mesh_bed_leveling.cpp | 2 +- Marlin/mesh_bed_leveling.h | 2 +- Marlin/pins.h | 2 +- Marlin/pins_3DRAG.h | 2 +- Marlin/pins_5DPRINT.h | 2 +- Marlin/pins_99.h | 2 +- Marlin/pins_A4JP.h | 2 +- Marlin/pins_AZTEEG_X1.h | 2 +- Marlin/pins_AZTEEG_X3.h | 2 +- Marlin/pins_AZTEEG_X3_PRO.h | 2 +- Marlin/pins_BAM_DICE_DUE.h | 2 +- Marlin/pins_BQ_ZUM_MEGA_3D.h | 2 +- Marlin/pins_BRAINWAVE.h | 2 +- Marlin/pins_BRAINWAVE_PRO.h | 2 +- Marlin/pins_CHEAPTRONIC.h | 2 +- Marlin/pins_ELEFU_3.h | 2 +- Marlin/pins_FELIX2.h | 2 +- Marlin/pins_GEN3_MONOLITHIC.h | 2 +- Marlin/pins_GEN3_PLUS.h | 2 +- Marlin/pins_GEN6.h | 2 +- Marlin/pins_GEN6_DELUXE.h | 2 +- Marlin/pins_GEN7_12.h | 2 +- Marlin/pins_GEN7_13.h | 2 +- Marlin/pins_GEN7_14.h | 2 +- Marlin/pins_GEN7_CUSTOM.h | 2 +- Marlin/pins_K8200.h | 2 +- Marlin/pins_LEAPFROG.h | 2 +- Marlin/pins_MEGACONTROLLER.h | 2 +- Marlin/pins_MEGATRONICS.h | 2 +- Marlin/pins_MEGATRONICS_2.h | 2 +- Marlin/pins_MEGATRONICS_3.h | 2 +- Marlin/pins_MELZI.h | 2 +- Marlin/pins_MELZI_MAKR3D.h | 2 +- Marlin/pins_MINIRAMBO.h | 2 +- Marlin/pins_MINITRONICS.h | 2 +- Marlin/pins_MKS_BASE.h | 2 +- Marlin/pins_OMCA.h | 2 +- Marlin/pins_OMCA_A.h | 2 +- Marlin/pins_PRINTRBOARD.h | 2 +- Marlin/pins_PRINTRBOARD_REVF.h | 2 +- Marlin/pins_RAMBO.h | 2 +- Marlin/pins_RAMPS_13.h | 2 +- Marlin/pins_RAMPS_13_EFB.h | 2 +- Marlin/pins_RAMPS_14.h | 2 +- Marlin/pins_RAMPS_14_EFB.h | 2 +- Marlin/pins_RAMPS_OLD.h | 2 +- Marlin/pins_RIGIDBOARD.h | 2 +- Marlin/pins_RUMBA.h | 2 +- Marlin/pins_SANGUINOLOLU_11.h | 2 +- Marlin/pins_SANGUINOLOLU_12.h | 2 +- Marlin/pins_SAV_MKI.h | 2 +- Marlin/pins_SETHI.h | 2 +- Marlin/pins_STB_11.h | 2 +- Marlin/pins_TEENSY2.h | 2 +- Marlin/pins_TEENSYLU.h | 2 +- Marlin/pins_ULTIMAIN_2.h | 2 +- Marlin/pins_ULTIMAKER.h | 2 +- Marlin/pins_ULTIMAKER_OLD.h | 2 +- Marlin/planner.cpp | 4 +- Marlin/planner.h | 4 +- Marlin/qr_solve.cpp | 82 +++++++++---------- Marlin/qr_solve.h | 2 +- Marlin/servo.cpp | 6 +- Marlin/servo.h | 8 +- Marlin/speed_lookuptable.h | 2 +- Marlin/stepper.cpp | 2 +- Marlin/stepper.h | 4 +- Marlin/stepper_dac.cpp | 4 +- Marlin/stepper_dac.h | 4 +- Marlin/stepper_indirection.cpp | 4 +- Marlin/stepper_indirection.h | 4 +- Marlin/temperature.cpp | 10 +-- Marlin/temperature.h | 4 +- Marlin/thermistortables.h | 2 +- Marlin/ultralcd.cpp | 2 +- Marlin/ultralcd.h | 2 +- .../ultralcd_implementation_hitachi_HD44780.h | 4 +- Marlin/ultralcd_st7920_u8glib_rrd.h | 2 +- Marlin/utf_mapper.h | 2 +- Marlin/vector_3.cpp | 4 +- Marlin/vector_3.h | 4 +- Marlin/watchdog.cpp | 2 +- Marlin/watchdog.h | 2 +- 191 files changed, 904 insertions(+), 496 deletions(-) diff --git a/Marlin/Conditionals.h b/Marlin/Conditionals.h index bea1cc772..376946ab7 100644 --- a/Marlin/Conditionals.h +++ b/Marlin/Conditionals.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Conditionals.h * Defines that depend on configuration but are not editable. */ diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f8470b92e..0ded36209 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index cc1902633..d137169d1 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/Default_Version.h b/Marlin/Default_Version.h index 39b1fcbd2..f8259b40c 100644 --- a/Marlin/Default_Version.h +++ b/Marlin/Default_Version.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * This file is a placeholder for a file which could be distributed in an archive * It takes the place of an automatically created "_Version.h" which is generated during the build process */ diff --git a/Marlin/M100_Free_Mem_Chk.cpp b/Marlin/M100_Free_Mem_Chk.cpp index bc096f144..f7900a0f3 100644 --- a/Marlin/M100_Free_Mem_Chk.cpp +++ b/Marlin/M100_Free_Mem_Chk.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,29 +20,26 @@ * */ +/** + * M100 Free Memory Watcher + * + * This code watches the free memory block between the bottom of the heap and the top of the stack. + * This memory block is initialized and watched via the M100 command. + * + * M100 I Initializes the free memory block and prints vitals statistics about the area + * M100 F Identifies how much of the free memory block remains free and unused. It also + * detects and reports any corruption within the free memory block that may have + * happened due to errant firmware. + * M100 D Does a hex display of the free memory block along with a flag for any errant + * data that does not match the expected value. + * M100 C x Corrupts x locations within the free memory block. This is useful to check the + * correctness of the M100 F and M100 D commands. + * + * Initial version by Roxy-3DPrintBoard + */ #define M100_FREE_MEMORY_DUMPER // Comment out to remove Dump sub-command #define M100_FREE_MEMORY_CORRUPTOR // Comment out to remove Corrupt sub-command - -// M100 Free Memory Watcher -// -// This code watches the free memory block between the bottom of the heap and the top of the stack. -// This memory block is initialized and watched via the M100 command. -// -// M100 I Initializes the free memory block and prints vitals statistics about the area -// M100 F Identifies how much of the free memory block remains free and unused. It also -// detects and reports any corruption within the free memory block that may have -// happened due to errant firmware. -// M100 D Does a hex display of the free memory block along with a flag for any errant -// data that does not match the expected value. -// M100 C x Corrupts x locations within the free memory block. This is useful to check the -// correctness of the M100 F and M100 D commands. -// -// Initial version by Roxy-3DPrintBoard -// -// - - #include "Marlin.h" #if ENABLED(M100_FREE_MEMORY_WATCHER) diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index 4cdea5949..8819b3fb8 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino index 5648e47fa..7c4dd9301 100644 --- a/Marlin/Marlin.ino +++ b/Marlin/Marlin.ino @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * About Marlin * * This firmware is a mashup between Sprinter and grbl. diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp index 2800cb04f..e6362fc7c 100644 --- a/Marlin/MarlinSerial.cpp +++ b/Marlin/MarlinSerial.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** HardwareSerial.cpp - Hardware serial library for Wiring Copyright (c) 2006 Nicholas Zambetti. All right reserved. diff --git a/Marlin/MarlinSerial.h b/Marlin/MarlinSerial.h index b884f242a..6af14557e 100644 --- a/Marlin/MarlinSerial.h +++ b/Marlin/MarlinSerial.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** HardwareSerial.h - Hardware serial library for Wiring Copyright (c) 2006 Nicholas Zambetti. All right reserved. diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index f9707daf1..edc36914c 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * * About Marlin * @@ -6618,7 +6618,7 @@ void clamp_to_software_endstops(float target[3]) { - sq(delta_tower3_x - cartesian[X_AXIS]) - sq(delta_tower3_y - cartesian[Y_AXIS]) ) + cartesian[Z_AXIS]; - /* + /** SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); @@ -6653,7 +6653,7 @@ void clamp_to_software_endstops(float target[3]) { delta[Y_AXIS] += offset; delta[Z_AXIS] += offset; - /* + /** SERIAL_ECHOPGM("grid_x="); SERIAL_ECHO(grid_x); SERIAL_ECHOPGM(" grid_y="); SERIAL_ECHO(grid_y); SERIAL_ECHOPGM(" floor_x="); SERIAL_ECHO(floor_x); @@ -7145,7 +7145,7 @@ void plan_arc( delta[Y_AXIS] = (SCARA_theta + SCARA_psi) * SCARA_RAD2DEG; // - equal to sub arm angle (inverted motor) delta[Z_AXIS] = cartesian[Z_AXIS]; - /* + /** SERIAL_ECHOPGM("cartesian x="); SERIAL_ECHO(cartesian[X_AXIS]); SERIAL_ECHOPGM(" y="); SERIAL_ECHO(cartesian[Y_AXIS]); SERIAL_ECHOPGM(" z="); SERIAL_ECHOLN(cartesian[Z_AXIS]); diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 5204fce59..16df8fbbf 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp index a97315c71..53935feb1 100644 --- a/Marlin/Sd2Card.cpp +++ b/Marlin/Sd2Card.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino Sd2Card Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/Sd2Card.h b/Marlin/Sd2Card.h index 5cc4c540c..106890fef 100644 --- a/Marlin/Sd2Card.h +++ b/Marlin/Sd2Card.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino Sd2Card Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/Sd2PinMap.h b/Marlin/Sd2PinMap.h index 0287bb187..698e1c224 100644 --- a/Marlin/Sd2PinMap.h +++ b/Marlin/Sd2PinMap.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2010 by William Greiman * diff --git a/Marlin/SdBaseFile.cpp b/Marlin/SdBaseFile.cpp index 0e5db7bea..472a60a56 100644 --- a/Marlin/SdBaseFile.cpp +++ b/Marlin/SdBaseFile.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdBaseFile.h b/Marlin/SdBaseFile.h index ef98535f7..2b912d2ed 100644 --- a/Marlin/SdBaseFile.h +++ b/Marlin/SdBaseFile.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdFatConfig.h b/Marlin/SdFatConfig.h index d496ffd4f..f9cb9fe14 100644 --- a/Marlin/SdFatConfig.h +++ b/Marlin/SdFatConfig.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdFatStructs.h b/Marlin/SdFatStructs.h index c7a761c4f..3e989dea9 100644 --- a/Marlin/SdFatStructs.h +++ b/Marlin/SdFatStructs.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * @@ -37,7 +37,7 @@ * \file * \brief FAT file structures */ -/* +/** * mostly from Microsoft document fatgen103.doc * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx */ diff --git a/Marlin/SdFatUtil.cpp b/Marlin/SdFatUtil.cpp index ba31299ea..48d91df68 100644 --- a/Marlin/SdFatUtil.cpp +++ b/Marlin/SdFatUtil.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2008 by William Greiman * diff --git a/Marlin/SdFatUtil.h b/Marlin/SdFatUtil.h index af4f45f8d..93c633ca8 100644 --- a/Marlin/SdFatUtil.h +++ b/Marlin/SdFatUtil.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2008 by William Greiman * diff --git a/Marlin/SdFile.cpp b/Marlin/SdFile.cpp index 81f63a4f4..d5748efe2 100644 --- a/Marlin/SdFile.cpp +++ b/Marlin/SdFile.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdFile.h b/Marlin/SdFile.h index c15b210b4..53f38255c 100644 --- a/Marlin/SdFile.h +++ b/Marlin/SdFile.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdInfo.h b/Marlin/SdInfo.h index 74cf65f26..f07dd6c01 100644 --- a/Marlin/SdInfo.h +++ b/Marlin/SdInfo.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino Sd2Card Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdVolume.cpp b/Marlin/SdVolume.cpp index c488f7519..e9c69dfc9 100644 --- a/Marlin/SdVolume.cpp +++ b/Marlin/SdVolume.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/SdVolume.h b/Marlin/SdVolume.h index 296d9955b..990248d6a 100644 --- a/Marlin/SdVolume.h +++ b/Marlin/SdVolume.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino SdFat Library * Copyright (C) 2009 by William Greiman * diff --git a/Marlin/blinkm.cpp b/Marlin/blinkm.cpp index c8d1c747a..c495a5deb 100644 --- a/Marlin/blinkm.cpp +++ b/Marlin/blinkm.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * blinkm.cpp - Library for controlling a BlinkM over i2c * Created by Tim Koster, August 21 2013. */ diff --git a/Marlin/blinkm.h b/Marlin/blinkm.h index 0ecc44170..ed2ad79bb 100644 --- a/Marlin/blinkm.h +++ b/Marlin/blinkm.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * blinkm.h - Library for controlling a BlinkM over i2c * Created by Tim Koster, August 21 2013. */ diff --git a/Marlin/boards.h b/Marlin/boards.h index 4395984ea..6b297fcad 100644 --- a/Marlin/boards.h +++ b/Marlin/boards.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/buzzer.cpp b/Marlin/buzzer.cpp index a53858cda..776ea4dfa 100644 --- a/Marlin/buzzer.cpp +++ b/Marlin/buzzer.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/buzzer.h b/Marlin/buzzer.h index 307b18c9d..ec568ecd8 100644 --- a/Marlin/buzzer.h +++ b/Marlin/buzzer.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp index 9eea93f53..bb2d6e1dd 100644 --- a/Marlin/cardreader.cpp +++ b/Marlin/cardreader.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -245,7 +245,7 @@ void CardReader::initsd() { } workDir = root; curDir = &root; - /* + /** if (!workDir.openRoot(&volume)) { SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL); } diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h index cc8064ec5..8bd53e551 100644 --- a/Marlin/cardreader.h +++ b/Marlin/cardreader.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 240cac91d..d9929e10a 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * configuration_store.cpp * * Configuration and EEPROM storage diff --git a/Marlin/configuration_store.h b/Marlin/configuration_store.h index 1c68a323f..2b2680607 100644 --- a/Marlin/configuration_store.h +++ b/Marlin/configuration_store.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/dac_mcp4728.cpp b/Marlin/dac_mcp4728.cpp index e58772c2b..3060e6e18 100644 --- a/Marlin/dac_mcp4728.cpp +++ b/Marlin/dac_mcp4728.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter * * For implementation details, please take a look at the datasheet: @@ -30,18 +30,15 @@ * http://arduino.cc/forum/index.php/topic,51842.0.html */ - -/* _____PROJECT INCLUDES_____________________________________________________ */ #include "dac_mcp4728.h" #if ENABLED(DAC_STEPPER_CURRENT) -// Used Global variables uint16_t mcp4728_values[4]; -/* -Begin I2C, get current values (input register and eeprom) of mcp4728 -*/ +/** + * Begin I2C, get current values (input register and eeprom) of mcp4728 + */ void mcp4728_init() { Wire.begin(); Wire.requestFrom(int(DAC_DEV_ADDRESS), 24); @@ -58,19 +55,19 @@ void mcp4728_init() { } } -/* -Write input resister value to specified channel using fastwrite method. -Channel : 0-3, Values : 0-4095 -*/ +/** + * Write input resister value to specified channel using fastwrite method. + * Channel : 0-3, Values : 0-4095 + */ uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) { mcp4728_values[channel] = value; return mcp4728_fastWrite(); } -/* -Write all input resistor values to EEPROM using SequencialWrite method. -This will update both input register and EEPROM value -This will also write current Vref, PowerDown, Gain settings to EEPROM -*/ +/** + * Write all input resistor values to EEPROM using SequencialWrite method. + * This will update both input register and EEPROM value + * This will also write current Vref, PowerDown, Gain settings to EEPROM + */ uint8_t mcp4728_eepromWrite() { Wire.beginTransmission(DAC_DEV_ADDRESS); Wire.send(SEQWRITE); @@ -81,31 +78,32 @@ uint8_t mcp4728_eepromWrite() { return Wire.endTransmission(); } -/* - Write Voltage reference setting to all input regiters -*/ +/** + * Write Voltage reference setting to all input regiters + */ uint8_t mcp4728_setVref_all(uint8_t value) { Wire.beginTransmission(DAC_DEV_ADDRESS); Wire.send(VREFWRITE | value << 3 | value << 2 | value << 1 | value); return Wire.endTransmission(); } -/* - Write Gain setting to all input regiters -*/ +/** + * Write Gain setting to all input regiters + */ uint8_t mcp4728_setGain_all(uint8_t value) { Wire.beginTransmission(DAC_DEV_ADDRESS); Wire.send(GAINWRITE | value << 3 | value << 2 | value << 1 | value); return Wire.endTransmission(); } -/* - Return Input Regiter value -*/ +/** + * Return Input Regiter value + */ uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; } -/* -// Steph: Might be useful in the future -// Return Vout +/** + * Steph: Might be useful in the future + * Return Vout + * uint16_t mcp4728_getVout(uint8_t channel) { uint32_t vref = 2048; uint32_t vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096; @@ -114,11 +112,11 @@ uint16_t mcp4728_getVout(uint8_t channel) { } */ -/* -FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1 -DAC Input and PowerDown bits update. -No EEPROM update -*/ +/** + * FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1 + * DAC Input and PowerDown bits update. + * No EEPROM update + */ uint8_t mcp4728_fastWrite() { Wire.beginTransmission(DAC_DEV_ADDRESS); for (uint8_t channel=0; channel <= 3; channel++) { @@ -128,9 +126,9 @@ uint8_t mcp4728_fastWrite() { return Wire.endTransmission(); } -/* -Common function for simple general commands -*/ +/** + * Common function for simple general commands + */ uint8_t mcp4728_simpleCommand(byte simpleCommand) { Wire.beginTransmission(GENERALCALL); Wire.send(simpleCommand); diff --git a/Marlin/dac_mcp4728.h b/Marlin/dac_mcp4728.h index 9dbe3299a..e1739c563 100644 --- a/Marlin/dac_mcp4728.h +++ b/Marlin/dac_mcp4728.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * Arduino library for MicroChip MCP4728 I2C D/A converter. */ diff --git a/Marlin/digipot_mcp4451.cpp b/Marlin/digipot_mcp4451.cpp index b32a4c3ac..771581341 100644 --- a/Marlin/digipot_mcp4451.cpp +++ b/Marlin/digipot_mcp4451.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/dogm_bitmaps.h b/Marlin/dogm_bitmaps.h index bf8e8e35c..db55a46a3 100644 --- a/Marlin/dogm_bitmaps.h +++ b/Marlin/dogm_bitmaps.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** * BitMap for splashscreen * Generated with: http://www.digole.com/tools/PicturetoC_Hex_converter.php * Please note that using the high-res version takes 402Bytes of PROGMEM. diff --git a/Marlin/dogm_font_data_6x9_marlin.h b/Marlin/dogm_font_data_6x9_marlin.h index 91a7d06a2..f298a6ac7 100644 --- a/Marlin/dogm_font_data_6x9_marlin.h +++ b/Marlin/dogm_font_data_6x9_marlin.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1 Copyright: Public domain font. Share and enjoy. Capital A Height: 6, '1' Height: 6 diff --git a/Marlin/dogm_font_data_HD44780_C.h b/Marlin/dogm_font_data_HD44780_C.h index e2c8f7848..21d4aaabe 100644 --- a/Marlin/dogm_font_data_HD44780_C.h +++ b/Marlin/dogm_font_data_HD44780_C.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: HD44780_C v1.2 Copyright: A. Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_HD44780_J.h b/Marlin/dogm_font_data_HD44780_J.h index a4f22f760..8b1b19847 100644 --- a/Marlin/dogm_font_data_HD44780_J.h +++ b/Marlin/dogm_font_data_HD44780_J.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: HD44780_J Copyright: A. Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_HD44780_W.h b/Marlin/dogm_font_data_HD44780_W.h index 35852959a..86b4bf4bf 100644 --- a/Marlin/dogm_font_data_HD44780_W.h +++ b/Marlin/dogm_font_data_HD44780_W.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: HD44780_W Copyright: A.Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_ISO10646_1.h b/Marlin/dogm_font_data_ISO10646_1.h index 0a47dd5e7..8ff40d054 100644 --- a/Marlin/dogm_font_data_ISO10646_1.h +++ b/Marlin/dogm_font_data_ISO10646_1.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: ISO10646-1 Copyright: A.Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h b/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h index b54c5cb37..75e779fd0 100644 --- a/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h +++ b/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: ISO10646_5_Cyrillic Copyright: A. Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_ISO10646_CN.h b/Marlin/dogm_font_data_ISO10646_CN.h index 7c10372b3..11fdb2240 100644 --- a/Marlin/dogm_font_data_ISO10646_CN.h +++ b/Marlin/dogm_font_data_ISO10646_CN.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: ISO10646_CN Copyright: A. Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_ISO10646_Kana.h b/Marlin/dogm_font_data_ISO10646_Kana.h index 39feaf40a..372412cf0 100644 --- a/Marlin/dogm_font_data_ISO10646_Kana.h +++ b/Marlin/dogm_font_data_ISO10646_Kana.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: ISO10646_Kana Copyright: A. Hardtung, public domain Capital A Height: 7, '1' Height: 7 diff --git a/Marlin/dogm_font_data_Marlin_symbols.h b/Marlin/dogm_font_data_Marlin_symbols.h index 976d3d240..ad9b983b2 100644 --- a/Marlin/dogm_font_data_Marlin_symbols.h +++ b/Marlin/dogm_font_data_Marlin_symbols.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** Fontname: Marlin_symbols Copyright: Created with Fony 1.4.7 Capital A Height: 0, '1' Height: 0 diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h index 1637d20d7..107b8608f 100644 --- a/Marlin/dogm_lcd_implementation.h +++ b/Marlin/dogm_lcd_implementation.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 597014d69..e7c7a30b6 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/Felix/Configuration_DUAL.h b/Marlin/example_configurations/Felix/Configuration_DUAL.h index e219face8..9ef89040c 100644 --- a/Marlin/example_configurations/Felix/Configuration_DUAL.h +++ b/Marlin/example_configurations/Felix/Configuration_DUAL.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 9e95fe5c2..216d16415 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 65918ea89..3f90aa4ec 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index f828f184e..2bd84d0b4 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 94c6c3138..5b56789d4 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h index fc8567724..c3ac27d7d 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 06c7ca085..1c6090c00 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,11 +20,28 @@ * */ -// Sample configuration file for Vellemann K8200 -// tested on K8200 with VM8201 (Display) -// and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21 -// https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip +/** + * Sample configuration file for Vellemann K8200 + * tested on K8200 with VM8201 (Display) + * and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21 + * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip + */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -34,8 +51,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -43,11 +62,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index c90c93ff0..3a58710a5 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -25,6 +25,17 @@ // and Arduino 1.6.8 (Mac) by @CONSULitAS, 2016-02-21 // https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-02-21.zip + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 0ed470257..b2fb63a2b 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index caea2418e..824175933 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 316881e75..23233e510 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 6eb99c15f..2e8bd5c7b 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index ecf4b6503..a8ee979d2 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 0515ebca6..fc4c0c757 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index 6a64d03ad..70d7db610 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 5db9f2142..5a0a5ec3a 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index f828f184e..2bd84d0b4 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index ba7c699a1..3dc5017fa 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 2f339cbfa..3c77b9cf0 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h index e0f3e04b7..ea7d782e2 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 687f9b0b0..42452f513 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 7b21d4551..c50f7e8bd 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 41132655d..21a50d3f5 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 702a1a377..436d8c228 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index ea8696163..3e533a4a4 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,10 +20,27 @@ * */ -// Example configuration file for OpenBeam Kossel Pro -// tested on 2015-05-19 by @Wackerbarth -// using Arduino 1.6.5 (Mac) +/** + * Example configuration file for OpenBeam Kossel Pro + * tested on 2015-05-19 by @Wackerbarth + * using Arduino 1.6.5 (Mac) + */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -33,8 +50,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -42,11 +61,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 58e0c710b..f7cb980b4 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -24,6 +24,17 @@ // tested on 2015-05-19 by @Wackerbarth // using Arduino 1.6.5 (Mac) + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 9a508859a..ae8cdf6fe 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 137875541..8fd808419 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 5854acd99..7ce56ede0 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 1d4bc409f..8ec4d870a 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 8ababd37c..b1d212b6c 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,21 @@ * */ +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ #ifndef CONFIGURATION_H #define CONFIGURATION_H @@ -29,8 +44,10 @@ //=========================================================================== //============================= Getting Started ============================= //=========================================================================== -/* -Here are some standard links for getting your machine calibrated: + +/** + * Here are some standard links for getting your machine calibrated: + * * http://reprap.org/wiki/Calibration * http://youtu.be/wAL9d7FgInk * http://calculator.josefprusa.cz @@ -38,11 +55,7 @@ Here are some standard links for getting your machine calibrated: * http://www.thingiverse.com/thing:5573 * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap * http://www.thingiverse.com/thing:298812 -*/ - -// This configuration file contains the basic settings. -// Advanced settings can be found in Configuration_adv.h -// BASIC SETTINGS: select your board type, temperature sensor type, axis scaling, and endstop configuration + */ //=========================================================================== //============================= DELTA Printer =============================== diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 0409216da..f8630f0ae 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,6 +20,16 @@ * */ +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H diff --git a/Marlin/fastio.h b/Marlin/fastio.h index 053113f99..fe8fa70e9 100644 --- a/Marlin/fastio.h +++ b/Marlin/fastio.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** This code contributed by Triffid_Hunter and modified by Kliment why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html */ @@ -30,7 +30,7 @@ #include -/* +/** utility functions */ @@ -38,7 +38,7 @@ #define MASK(PIN) (1 << PIN) #endif -/* +/** magic I/O routines now you can simply SET_OUTPUT(STEP); WRITE(STEP, 1); WRITE(STEP, 0); */ @@ -107,7 +107,7 @@ // Shorthand #define OUT_WRITE(IO, v) { SET_OUTPUT(IO); WRITE(IO, v); } -/* +/** ports and functions added as necessary or if I feel like it- not a comprehensive list! @@ -138,7 +138,7 @@ #define DEBUG_LED AIO5 - /* + /** pins */ @@ -477,7 +477,7 @@ #define OC2B DIO14 #define DEBUG_LED DIO0 - /* + /** pins */ @@ -986,7 +986,7 @@ // change for your board #define DEBUG_LED DIO21 - /* + /** pins */ #define DIO0_PIN PINE0 @@ -2056,7 +2056,7 @@ // change for your board #define DEBUG_LED DIO31 /* led D5 red */ - /* + /** pins */ @@ -2698,7 +2698,7 @@ #else // AT90USBxx_TEENSYPP_ASSIGNMENTS -- Use Teensyduino Teensy++2.0 assignments. - /* + /** AT90USB 51 50 49 48 47 46 45 44 10 11 12 13 14 15 16 17 35 36 37 38 39 40 41 42 25 26 27 28 29 30 31 32 33 34 43 09 18 19 01 02 61 60 59 58 57 56 55 54 Port A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 @@ -3373,7 +3373,7 @@ // change for your board #define DEBUG_LED DIO46 - /* + /** pins */ #define DIO0_PIN PINE0 diff --git a/Marlin/language.h b/Marlin/language.h index f3ca13f39..1b82ec314 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_an.h b/Marlin/language_an.h index cf7a8a9e5..ab93671dc 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index fadef863c..c6007dba3 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index d7db26d32..f08e29e32 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index ed386493c..e6a0ccf0a 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index f7464d221..6555aa01e 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_da.h b/Marlin/language_da.h index da0d6bdc6..e47fd1c8f 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_de.h b/Marlin/language_de.h index 254034665..3d791e2d3 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 38cc8957e..b4eb6d5cd 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_es.h b/Marlin/language_es.h index 2401e618d..a8c4fc803 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index 0223f144c..28e0e0c03 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index 8d23775c5..b6f7de6fd 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index be4fce765..11aaf9575 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h index c26e19c32..2a1593530 100644 --- a/Marlin/language_gl.h +++ b/Marlin/language_gl.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_it.h b/Marlin/language_it.h index 1056554c1..23ad7c6c5 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index 40bfd96ef..fca13e929 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index 75763318a..4ca47a8e7 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 34a23510a..27aefee01 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index f5d63a8d0..37586f53a 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h index 8a6567bbf..3e882635f 100644 --- a/Marlin/language_pt-br.h +++ b/Marlin/language_pt-br.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_pt-br_utf8.h b/Marlin/language_pt-br_utf8.h index 5f08e846e..7b6639bd0 100644 --- a/Marlin/language_pt-br_utf8.h +++ b/Marlin/language_pt-br_utf8.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index eb3cb9dd8..5070c93ea 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_pt_utf8.h b/Marlin/language_pt_utf8.h index 2cc7cc2db..64da9645d 100644 --- a/Marlin/language_pt_utf8.h +++ b/Marlin/language_pt_utf8.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index d2076b3a7..fe04c03aa 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/language_test.h b/Marlin/language_test.h index f8ebacaa9..3444ee502 100644 --- a/Marlin/language_test.h +++ b/Marlin/language_test.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/macros.h b/Marlin/macros.h index 4318a4dda..966fc48d0 100644 --- a/Marlin/macros.h +++ b/Marlin/macros.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/mesh_bed_leveling.cpp b/Marlin/mesh_bed_leveling.cpp index c6d168ae3..462c6c686 100644 --- a/Marlin/mesh_bed_leveling.cpp +++ b/Marlin/mesh_bed_leveling.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/mesh_bed_leveling.h b/Marlin/mesh_bed_leveling.h index f9a8e7274..d531ff516 100644 --- a/Marlin/mesh_bed_leveling.h +++ b/Marlin/mesh_bed_leveling.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins.h b/Marlin/pins.h index b4f1c3978..b11636462 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_3DRAG.h b/Marlin/pins_3DRAG.h index 1c8997ace..e3175a240 100644 --- a/Marlin/pins_3DRAG.h +++ b/Marlin/pins_3DRAG.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_5DPRINT.h b/Marlin/pins_5DPRINT.h index 425f46ced..14a5d4d7d 100644 --- a/Marlin/pins_5DPRINT.h +++ b/Marlin/pins_5DPRINT.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_99.h b/Marlin/pins_99.h index 4ac464b80..1b050573f 100644 --- a/Marlin/pins_99.h +++ b/Marlin/pins_99.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_A4JP.h b/Marlin/pins_A4JP.h index 19c3a96a3..2e36db595 100644 --- a/Marlin/pins_A4JP.h +++ b/Marlin/pins_A4JP.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_AZTEEG_X1.h b/Marlin/pins_AZTEEG_X1.h index 12bb7caf9..21bb491f5 100644 --- a/Marlin/pins_AZTEEG_X1.h +++ b/Marlin/pins_AZTEEG_X1.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h index fe9bcadf1..2668d0913 100644 --- a/Marlin/pins_AZTEEG_X3.h +++ b/Marlin/pins_AZTEEG_X3.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_AZTEEG_X3_PRO.h b/Marlin/pins_AZTEEG_X3_PRO.h index 2a6b2fa79..a184ec2b9 100644 --- a/Marlin/pins_AZTEEG_X3_PRO.h +++ b/Marlin/pins_AZTEEG_X3_PRO.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_BAM_DICE_DUE.h b/Marlin/pins_BAM_DICE_DUE.h index 3f28f232c..355daf5c1 100644 --- a/Marlin/pins_BAM_DICE_DUE.h +++ b/Marlin/pins_BAM_DICE_DUE.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_BQ_ZUM_MEGA_3D.h b/Marlin/pins_BQ_ZUM_MEGA_3D.h index f73375ed9..d8ea11461 100644 --- a/Marlin/pins_BQ_ZUM_MEGA_3D.h +++ b/Marlin/pins_BQ_ZUM_MEGA_3D.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_BRAINWAVE.h b/Marlin/pins_BRAINWAVE.h index 03acdaf59..a02b6515f 100644 --- a/Marlin/pins_BRAINWAVE.h +++ b/Marlin/pins_BRAINWAVE.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_BRAINWAVE_PRO.h b/Marlin/pins_BRAINWAVE_PRO.h index 27cdb780c..c79f04eb6 100644 --- a/Marlin/pins_BRAINWAVE_PRO.h +++ b/Marlin/pins_BRAINWAVE_PRO.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_CHEAPTRONIC.h b/Marlin/pins_CHEAPTRONIC.h index 270297f14..1bbd97952 100644 --- a/Marlin/pins_CHEAPTRONIC.h +++ b/Marlin/pins_CHEAPTRONIC.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_ELEFU_3.h b/Marlin/pins_ELEFU_3.h index 45444aa9c..23f8b944f 100644 --- a/Marlin/pins_ELEFU_3.h +++ b/Marlin/pins_ELEFU_3.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_FELIX2.h b/Marlin/pins_FELIX2.h index 9287fbd41..79d8332ad 100644 --- a/Marlin/pins_FELIX2.h +++ b/Marlin/pins_FELIX2.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN3_MONOLITHIC.h b/Marlin/pins_GEN3_MONOLITHIC.h index ca876ff80..ba61fd2a6 100644 --- a/Marlin/pins_GEN3_MONOLITHIC.h +++ b/Marlin/pins_GEN3_MONOLITHIC.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN3_PLUS.h b/Marlin/pins_GEN3_PLUS.h index eb3a7f158..15241bfb5 100644 --- a/Marlin/pins_GEN3_PLUS.h +++ b/Marlin/pins_GEN3_PLUS.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN6.h b/Marlin/pins_GEN6.h index 042095e48..6d1ce468d 100644 --- a/Marlin/pins_GEN6.h +++ b/Marlin/pins_GEN6.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN6_DELUXE.h b/Marlin/pins_GEN6_DELUXE.h index 647dcd20e..718f517c6 100644 --- a/Marlin/pins_GEN6_DELUXE.h +++ b/Marlin/pins_GEN6_DELUXE.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN7_12.h b/Marlin/pins_GEN7_12.h index 488f6402c..0c23c0648 100644 --- a/Marlin/pins_GEN7_12.h +++ b/Marlin/pins_GEN7_12.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN7_13.h b/Marlin/pins_GEN7_13.h index 9a721e21d..5887aeca8 100644 --- a/Marlin/pins_GEN7_13.h +++ b/Marlin/pins_GEN7_13.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN7_14.h b/Marlin/pins_GEN7_14.h index 697bd806b..04a4fce1a 100644 --- a/Marlin/pins_GEN7_14.h +++ b/Marlin/pins_GEN7_14.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_GEN7_CUSTOM.h b/Marlin/pins_GEN7_CUSTOM.h index dcaa3264e..9150a41b9 100644 --- a/Marlin/pins_GEN7_CUSTOM.h +++ b/Marlin/pins_GEN7_CUSTOM.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_K8200.h b/Marlin/pins_K8200.h index e6d7ba436..6aab9caed 100644 --- a/Marlin/pins_K8200.h +++ b/Marlin/pins_K8200.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_LEAPFROG.h b/Marlin/pins_LEAPFROG.h index 8366b6971..8d1a2401a 100644 --- a/Marlin/pins_LEAPFROG.h +++ b/Marlin/pins_LEAPFROG.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MEGACONTROLLER.h b/Marlin/pins_MEGACONTROLLER.h index c58a28d65..61cd91be0 100644 --- a/Marlin/pins_MEGACONTROLLER.h +++ b/Marlin/pins_MEGACONTROLLER.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MEGATRONICS.h b/Marlin/pins_MEGATRONICS.h index 99d87b0a0..e25cf8a55 100644 --- a/Marlin/pins_MEGATRONICS.h +++ b/Marlin/pins_MEGATRONICS.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MEGATRONICS_2.h b/Marlin/pins_MEGATRONICS_2.h index ea1683d6e..186f15427 100644 --- a/Marlin/pins_MEGATRONICS_2.h +++ b/Marlin/pins_MEGATRONICS_2.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MEGATRONICS_3.h b/Marlin/pins_MEGATRONICS_3.h index 3a7c37889..c60f3c633 100644 --- a/Marlin/pins_MEGATRONICS_3.h +++ b/Marlin/pins_MEGATRONICS_3.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MELZI.h b/Marlin/pins_MELZI.h index 96de98b23..dae033bf8 100644 --- a/Marlin/pins_MELZI.h +++ b/Marlin/pins_MELZI.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MELZI_MAKR3D.h b/Marlin/pins_MELZI_MAKR3D.h index d878f6f4e..fe77e27bc 100644 --- a/Marlin/pins_MELZI_MAKR3D.h +++ b/Marlin/pins_MELZI_MAKR3D.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h index 2a96d5ec9..a67dd9c3a 100644 --- a/Marlin/pins_MINIRAMBO.h +++ b/Marlin/pins_MINIRAMBO.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MINITRONICS.h b/Marlin/pins_MINITRONICS.h index 5e4d12249..8bd7b5fc1 100644 --- a/Marlin/pins_MINITRONICS.h +++ b/Marlin/pins_MINITRONICS.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_MKS_BASE.h b/Marlin/pins_MKS_BASE.h index fa2bfb60e..5ca8e05b9 100644 --- a/Marlin/pins_MKS_BASE.h +++ b/Marlin/pins_MKS_BASE.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_OMCA.h b/Marlin/pins_OMCA.h index 02d3b7c24..e98439608 100644 --- a/Marlin/pins_OMCA.h +++ b/Marlin/pins_OMCA.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_OMCA_A.h b/Marlin/pins_OMCA_A.h index 49405edcf..147006de7 100644 --- a/Marlin/pins_OMCA_A.h +++ b/Marlin/pins_OMCA_A.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_PRINTRBOARD.h b/Marlin/pins_PRINTRBOARD.h index 72f73b533..893351710 100644 --- a/Marlin/pins_PRINTRBOARD.h +++ b/Marlin/pins_PRINTRBOARD.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_PRINTRBOARD_REVF.h b/Marlin/pins_PRINTRBOARD_REVF.h index 3b3dab579..d0c6fdb9e 100644 --- a/Marlin/pins_PRINTRBOARD_REVF.h +++ b/Marlin/pins_PRINTRBOARD_REVF.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMBO.h b/Marlin/pins_RAMBO.h index bb2d283ae..b74869316 100644 --- a/Marlin/pins_RAMBO.h +++ b/Marlin/pins_RAMBO.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMPS_13.h b/Marlin/pins_RAMPS_13.h index f4b10da0f..5655f35a1 100644 --- a/Marlin/pins_RAMPS_13.h +++ b/Marlin/pins_RAMPS_13.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMPS_13_EFB.h b/Marlin/pins_RAMPS_13_EFB.h index 9ba72ef55..e0bea37e7 100644 --- a/Marlin/pins_RAMPS_13_EFB.h +++ b/Marlin/pins_RAMPS_13_EFB.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMPS_14.h b/Marlin/pins_RAMPS_14.h index cfd900d10..9354cc245 100644 --- a/Marlin/pins_RAMPS_14.h +++ b/Marlin/pins_RAMPS_14.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMPS_14_EFB.h b/Marlin/pins_RAMPS_14_EFB.h index ccfda8e9f..a43e4d227 100644 --- a/Marlin/pins_RAMPS_14_EFB.h +++ b/Marlin/pins_RAMPS_14_EFB.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RAMPS_OLD.h b/Marlin/pins_RAMPS_OLD.h index 7f7bf3ed4..25193c8ed 100644 --- a/Marlin/pins_RAMPS_OLD.h +++ b/Marlin/pins_RAMPS_OLD.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RIGIDBOARD.h b/Marlin/pins_RIGIDBOARD.h index 411a2884a..69ce67d87 100644 --- a/Marlin/pins_RIGIDBOARD.h +++ b/Marlin/pins_RIGIDBOARD.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h index a594fbd89..e2d1e209f 100644 --- a/Marlin/pins_RUMBA.h +++ b/Marlin/pins_RUMBA.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_SANGUINOLOLU_11.h b/Marlin/pins_SANGUINOLOLU_11.h index b219566ec..d84854878 100644 --- a/Marlin/pins_SANGUINOLOLU_11.h +++ b/Marlin/pins_SANGUINOLOLU_11.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_SANGUINOLOLU_12.h b/Marlin/pins_SANGUINOLOLU_12.h index 2a25ad110..84d86275e 100644 --- a/Marlin/pins_SANGUINOLOLU_12.h +++ b/Marlin/pins_SANGUINOLOLU_12.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_SAV_MKI.h b/Marlin/pins_SAV_MKI.h index 3807dc25b..4c14fa6e2 100644 --- a/Marlin/pins_SAV_MKI.h +++ b/Marlin/pins_SAV_MKI.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_SETHI.h b/Marlin/pins_SETHI.h index 353e1a2be..e16b45cea 100644 --- a/Marlin/pins_SETHI.h +++ b/Marlin/pins_SETHI.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_STB_11.h b/Marlin/pins_STB_11.h index 487c73453..9ca93a3f7 100644 --- a/Marlin/pins_STB_11.h +++ b/Marlin/pins_STB_11.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_TEENSY2.h b/Marlin/pins_TEENSY2.h index b75606871..eb27ae97d 100644 --- a/Marlin/pins_TEENSY2.h +++ b/Marlin/pins_TEENSY2.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h index 0538fb95b..ea1492429 100644 --- a/Marlin/pins_TEENSYLU.h +++ b/Marlin/pins_TEENSYLU.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_ULTIMAIN_2.h b/Marlin/pins_ULTIMAIN_2.h index 62b601ff8..f4635b398 100644 --- a/Marlin/pins_ULTIMAIN_2.h +++ b/Marlin/pins_ULTIMAIN_2.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h index 259fca9fc..36feb6e02 100644 --- a/Marlin/pins_ULTIMAKER.h +++ b/Marlin/pins_ULTIMAKER.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/pins_ULTIMAKER_OLD.h b/Marlin/pins_ULTIMAKER_OLD.h index 7b7b8d9f8..d08b5bd27 100644 --- a/Marlin/pins_ULTIMAKER_OLD.h +++ b/Marlin/pins_ULTIMAKER_OLD.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index b14903c29..6bc35627a 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -1062,7 +1062,7 @@ float junction_deviation = 0.1; block->advance = advance; block->advance_rate = acc_dist ? advance / (float)acc_dist : 0; } - /* + /** SERIAL_ECHO_START; SERIAL_ECHOPGM("advance :"); SERIAL_ECHO(block->advance/256.0); diff --git a/Marlin/planner.h b/Marlin/planner.h index eca553554..dd724424b 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** planner.h - buffers movement commands and manages the acceleration profile plan Part of Grbl diff --git a/Marlin/qr_solve.cpp b/Marlin/qr_solve.cpp index 202de7ce7..ddafb005e 100644 --- a/Marlin/qr_solve.cpp +++ b/Marlin/qr_solve.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -32,7 +32,7 @@ int i4_min(int i1, int i2) /******************************************************************************/ -/* +/** Purpose: I4_MIN returns the smaller of two I4's. @@ -62,7 +62,7 @@ int i4_min(int i1, int i2) double r8_epsilon(void) /******************************************************************************/ -/* +/** Purpose: R8_EPSILON returns the R8 round off unit. @@ -99,7 +99,7 @@ double r8_epsilon(void) double r8_max(double x, double y) /******************************************************************************/ -/* +/** Purpose: R8_MAX returns the maximum of two R8's. @@ -129,7 +129,7 @@ double r8_max(double x, double y) double r8_abs(double x) /******************************************************************************/ -/* +/** Purpose: R8_ABS returns the absolute value of an R8. @@ -159,7 +159,7 @@ double r8_abs(double x) double r8_sign(double x) /******************************************************************************/ -/* +/** Purpose: R8_SIGN returns the sign of an R8. @@ -189,7 +189,7 @@ double r8_sign(double x) double r8mat_amax(int m, int n, double a[]) /******************************************************************************/ -/* +/** Purpose: R8MAT_AMAX returns the maximum absolute value entry of an R8MAT. @@ -234,7 +234,7 @@ double r8mat_amax(int m, int n, double a[]) void r8mat_copy(double a2[], int m, int n, double a1[]) /******************************************************************************/ -/* +/** Purpose: R8MAT_COPY_NEW copies one R8MAT to a "new" R8MAT. @@ -276,7 +276,7 @@ void r8mat_copy(double a2[], int m, int n, double a1[]) void daxpy(int n, double da, double dx[], int incx, double dy[], int incy) /******************************************************************************/ -/* +/** Purpose: DAXPY computes constant times a vector plus a vector. @@ -328,7 +328,7 @@ void daxpy(int n, double da, double dx[], int incx, double dy[], int incy) if (n <= 0 || da == 0.0) return; int i, ix, iy, m; - /* + /** Code for unequal increments or equal increments not equal to 1. */ @@ -347,7 +347,7 @@ void daxpy(int n, double da, double dx[], int incx, double dy[], int incy) iy = iy + incy; } } - /* + /** Code for both increments equal to 1. */ else { @@ -367,7 +367,7 @@ void daxpy(int n, double da, double dx[], int incx, double dy[], int incy) double ddot(int n, double dx[], int incx, double dy[], int incy) /******************************************************************************/ -/* +/** Purpose: DDOT forms the dot product of two vectors. @@ -422,7 +422,7 @@ double ddot(int n, double dx[], int incx, double dy[], int incy) int i, m; double dtemp = 0.0; - /* + /** Code for unequal increments or equal increments not equal to 1. */ @@ -435,7 +435,7 @@ double ddot(int n, double dx[], int incx, double dy[], int incy) iy = iy + incy; } } - /* + /** Code for both increments equal to 1. */ else { @@ -457,7 +457,7 @@ double ddot(int n, double dx[], int incx, double dy[], int incy) double dnrm2(int n, double x[], int incx) /******************************************************************************/ -/* +/** Purpose: DNRM2 returns the euclidean norm of a vector. @@ -531,7 +531,7 @@ void dqrank(double a[], int lda, int m, int n, double tol, int* kr, int jpvt[], double qraux[]) /******************************************************************************/ -/* +/** Purpose: DQRANK computes the QR factorization of a rectangular matrix. @@ -625,7 +625,7 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], double work[], int job) /******************************************************************************/ -/* +/** Purpose: DQRDC computes the QR factorization of a real rectangular matrix. @@ -709,7 +709,7 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], double maxnrm, nrmxl, t, tt; int pl = 1, pu = 0; - /* + /** If pivoting is requested, rearrange the columns. */ if (job != 0) { @@ -738,19 +738,19 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], } } } - /* + /** Compute the norms of the free columns. */ for (j = pl; j <= pu; j++) qraux[j - 1] = dnrm2(n, a + 0 + (j - 1) * lda, 1); for (j = pl; j <= pu; j++) work[j - 1] = qraux[j - 1]; - /* + /** Perform the Householder reduction of A. */ lup = i4_min(n, p); for (int l = 1; l <= lup; l++) { - /* + /** Bring the column of largest norm into the pivot position. */ if (pl <= l && l < pu) { @@ -771,7 +771,7 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], jpvt[l - 1] = jp; } } - /* + /** Compute the Householder transformation for column L. */ qraux[l - 1] = 0.0; @@ -782,7 +782,7 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], nrmxl = nrmxl * r8_sign(a[l - 1 + (l - 1) * lda]); dscal(n - l + 1, 1.0 / nrmxl, a + l - 1 + (l - 1)*lda, 1); a[l - 1 + (l - 1)*lda] = 1.0 + a[l - 1 + (l - 1) * lda]; - /* + /** Apply the transformation to the remaining columns, updating the norms. */ for (j = l + 1; j <= p; j++) { @@ -804,7 +804,7 @@ void dqrdc(double a[], int lda, int n, int p, double qraux[], int jpvt[], } } } - /* + /** Save the transformation. */ qraux[l - 1] = a[l - 1 + (l - 1) * lda]; @@ -819,7 +819,7 @@ int dqrls(double a[], int lda, int m, int n, double tol, int* kr, double b[], double x[], double rsd[], int jpvt[], double qraux[], int itask) /******************************************************************************/ -/* +/** Purpose: DQRLS factors and solves a linear system in the least squares sense. @@ -949,12 +949,12 @@ int dqrls(double a[], int lda, int m, int n, double tol, int* kr, double b[], } ind = 0; - /* + /** Factor the matrix. */ if (itask == 1) dqrank(a, lda, m, n, tol, kr, jpvt, qraux); - /* + /** Solve the least-squares problem. */ dqrlss(a, lda, m, n, *kr, b, x, rsd, jpvt, qraux); @@ -966,7 +966,7 @@ void dqrlss(double a[], int lda, int m, int n, int kr, double b[], double x[], double rsd[], int jpvt[], double qraux[]) /******************************************************************************/ -/* +/** Purpose: DQRLSS solves a linear system in a least squares sense. @@ -1075,7 +1075,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], double qy[], double qty[], double b[], double rsd[], double ab[], int job) /******************************************************************************/ -/* +/** Purpose: DQRSL computes transformations, projections, and least squares solutions. @@ -1222,12 +1222,12 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], int ju; double t; double temp; - /* + /** Set INFO flag. */ info = 0; - /* + /** Determine what is to be computed. */ cqy = ( job / 10000 != 0); @@ -1237,7 +1237,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], cab = ((job % 10) != 0); ju = i4_min(k, n - 1); - /* + /** Special action when N = 1. */ if (ju == 0) { @@ -1257,7 +1257,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], rsd[0] = 0.0; return info; } - /* + /** Set up to compute QY or QTY. */ if (cqy) { @@ -1268,7 +1268,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], for (i = 1; i <= n; i++) qty[i - 1] = y[i - 1]; } - /* + /** Compute QY. */ if (cqy) { @@ -1283,7 +1283,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], } } } - /* + /** Compute Q'*Y. */ if (cqty) { @@ -1297,7 +1297,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], } } } - /* + /** Set up to compute B, RSD, or AB. */ if (cb) { @@ -1320,7 +1320,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], for (i = 1; i <= k; i++) rsd[i - 1] = 0.0; } - /* + /** Compute B. */ if (cb) { @@ -1337,7 +1337,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], } } } - /* + /** Compute RSD or AB as required. */ if (cr || cab) { @@ -1369,7 +1369,7 @@ int dqrsl(double a[], int lda, int n, int k, double qraux[], double y[], void dscal(int n, double sa, double x[], int incx) /******************************************************************************/ -/* +/** Purpose: DSCAL scales a vector by a constant. @@ -1444,7 +1444,7 @@ void dscal(int n, double sa, double x[], int incx) void dswap(int n, double x[], int incx, double y[], int incy) /******************************************************************************/ -/* +/** Purpose: DSWAP interchanges two vectors. @@ -1529,7 +1529,7 @@ void dswap(int n, double x[], int incx, double y[], int incy) void qr_solve(double x[], int m, int n, double a[], double b[]) /******************************************************************************/ -/* +/** Purpose: QR_SOLVE solves a linear system in the least squares sense. diff --git a/Marlin/qr_solve.h b/Marlin/qr_solve.h index 7c6733ebf..b985d622f 100644 --- a/Marlin/qr_solve.h +++ b/Marlin/qr_solve.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/servo.cpp b/Marlin/servo.cpp index 961b39a27..1b8442a0d 100644 --- a/Marlin/servo.cpp +++ b/Marlin/servo.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. @@ -39,7 +39,7 @@ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* +/** A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. The servos are pulsed in the background using the value most recently written using the write() method diff --git a/Marlin/servo.h b/Marlin/servo.h index 410c0719e..13ce9f100 100644 --- a/Marlin/servo.h +++ b/Marlin/servo.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. @@ -39,7 +39,7 @@ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* +/** A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. The servos are pulsed in the background using the value most recently written using the write() method @@ -71,7 +71,7 @@ #include -/* +/** * Defines for 16 bit timers used with Servo library * * If _useTimerX is defined then TimerX is a 16 bit timer on the current board diff --git a/Marlin/speed_lookuptable.h b/Marlin/speed_lookuptable.h index 1ed4a0b7d..08cc4839a 100644 --- a/Marlin/speed_lookuptable.h +++ b/Marlin/speed_lookuptable.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 9c9c19386..32ae37eed 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/stepper.h b/Marlin/stepper.h index f0c3b2d70..aecbf5802 100644 --- a/Marlin/stepper.h +++ b/Marlin/stepper.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** stepper.h - stepper motor driver: executes motion plans of planner.c using the stepper motors Part of Grbl diff --git a/Marlin/stepper_dac.cpp b/Marlin/stepper_dac.cpp index 5830db6e2..2e3248daa 100644 --- a/Marlin/stepper_dac.cpp +++ b/Marlin/stepper_dac.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** stepper_dac.cpp - To set stepper current via DAC Part of Marlin diff --git a/Marlin/stepper_dac.h b/Marlin/stepper_dac.h index a96470426..d80a84670 100644 --- a/Marlin/stepper_dac.h +++ b/Marlin/stepper_dac.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** stepper_dac.h - To set stepper current via DAC Part of Marlin diff --git a/Marlin/stepper_indirection.cpp b/Marlin/stepper_indirection.cpp index e566cd619..0ede05614 100644 --- a/Marlin/stepper_indirection.cpp +++ b/Marlin/stepper_indirection.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** stepper_indirection.c - stepper motor driver indirection to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation Part of Marlin diff --git a/Marlin/stepper_indirection.h b/Marlin/stepper_indirection.h index 264cf7efc..0a534efdd 100644 --- a/Marlin/stepper_indirection.h +++ b/Marlin/stepper_indirection.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** stepper_indirection.h - stepper motor driver indirection macros to allow some stepper functions to be done via SPI/I2c instead of direct pin manipulation Part of Marlin diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index ab538e257..99909204d 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** temperature.cpp - temperature control Part of Marlin @@ -316,7 +316,7 @@ void PID_autotune(float temp, int extruder, int ncycles, bool set_result/*=false SERIAL_PROTOCOLPGM(MSG_KP); SERIAL_PROTOCOLLN(Kp); SERIAL_PROTOCOLPGM(MSG_KI); SERIAL_PROTOCOLLN(Ki); SERIAL_PROTOCOLPGM(MSG_KD); SERIAL_PROTOCOLLN(Kd); - /* + /** Kp = 0.33*Ku; Ki = Kp/Tu; Kd = Kp*Tu/3; @@ -1118,7 +1118,7 @@ void tp_init() { static float tr_target_temperature[EXTRUDERS + 1] = { 0.0 }; - /* + /** SERIAL_ECHO_START; SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: "); if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHOPGM(heater_id); @@ -1435,7 +1435,7 @@ ISR(TIMER0_COMPB_vect) { #else // SLOW_PWM_HEATERS - /* + /** * SLOW PWM HEATERS * * for heaters drived by relay diff --git a/Marlin/temperature.h b/Marlin/temperature.h index 41a611be1..084b6344d 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** temperature.h - temperature controller Part of Marlin diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index 6e3f83be9..aeef2c7f7 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 96b29e311..108ce4bea 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index d725ee185..374310104 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h index 8613918f9..c5c8bd04d 100644 --- a/Marlin/ultralcd_implementation_hitachi_HD44780.h +++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -533,7 +533,7 @@ unsigned lcd_print(char c) { return charset_mapper(c); } #endif // SHOW_BOOTSCREEN -/* +/** Possible status screens: 16x2 |000/000 B000/000| |0123456789012345| diff --git a/Marlin/ultralcd_st7920_u8glib_rrd.h b/Marlin/ultralcd_st7920_u8glib_rrd.h index 261a5b91a..9aa53ceab 100644 --- a/Marlin/ultralcd_st7920_u8glib_rrd.h +++ b/Marlin/ultralcd_st7920_u8glib_rrd.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/utf_mapper.h b/Marlin/utf_mapper.h index 782a36b92..26e97772b 100644 --- a/Marlin/utf_mapper.h +++ b/Marlin/utf_mapper.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/vector_3.cpp b/Marlin/vector_3.cpp index 2bc2e9068..1cca0d9d8 100644 --- a/Marlin/vector_3.cpp +++ b/Marlin/vector_3.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** vector_3.cpp - Vector library for bed leveling Copyright (c) 2012 Lars Brubaker. All right reserved. diff --git a/Marlin/vector_3.h b/Marlin/vector_3.h index 6a40513f8..e76188b04 100644 --- a/Marlin/vector_3.h +++ b/Marlin/vector_3.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * @@ -20,7 +20,7 @@ * */ -/* +/** vector_3.cpp - Vector library for bed leveling Copyright (c) 2012 Lars Brubaker. All right reserved. diff --git a/Marlin/watchdog.cpp b/Marlin/watchdog.cpp index f8de41807..4397ab603 100644 --- a/Marlin/watchdog.cpp +++ b/Marlin/watchdog.cpp @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * diff --git a/Marlin/watchdog.h b/Marlin/watchdog.h index 77e17fa7a..2c04b5897 100644 --- a/Marlin/watchdog.h +++ b/Marlin/watchdog.h @@ -1,4 +1,4 @@ -/* +/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] *