From 1116e13f5a5c153a2b4e1995a9154434992695cd Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 17 May 2015 05:00:09 -0700 Subject: [PATCH] Further optimization of command parser --- Marlin/Marlin_main.cpp | 169 ++++++++++++++++++++--------------------- 1 file changed, 82 insertions(+), 87 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 52571fc8e..80e865f0e 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -141,7 +141,7 @@ * M112 - Emergency stop * M114 - Output current position to serial port * M115 - Capabilities string - * M117 - display message + * M117 - Display a message on the controller screen * M119 - Output Endstop status to serial port * M120 - Enable endstop detection * M121 - Disable endstop detection @@ -266,7 +266,7 @@ static bool relative_mode = false; //Determines Absolute or Relative Coordinate static char serial_char; static int serial_count = 0; static boolean comment_mode = false; -static char *strchr_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) +static char *seen_pointer; ///< A pointer to find chars in the command string (X, Y, Z, E, etc.) const char* queued_commands_P= NULL; /* pointer to the current line in the active sequence of commands, or NULL when none */ const int sensitive_pins[] = SENSITIVE_PINS; ///< Sensitive pin list for M42 // Inactivity shutdown @@ -786,21 +786,20 @@ void get_command() { fromsd[cmd_queue_index_w] = false; #endif - if (strchr(command, 'N') != NULL) { - strchr_pointer = strchr(command, 'N'); - gcode_N = (strtol(strchr_pointer + 1, NULL, 10)); + char *npos = strchr(command, 'N'); + char *apos = strchr(command, '*'); + if (npos) { + gcode_N = strtol(npos + 1, NULL, 10); if (gcode_N != gcode_LastN + 1 && strstr_P(command, PSTR("M110")) == NULL) { gcode_line_error(PSTR(MSG_ERR_LINE_NO)); return; } - if (strchr(command, '*') != NULL) { - byte checksum = 0; - byte count = 0; + if (apos) { + byte checksum = 0, count = 0; while (command[count] != '*') checksum ^= command[count++]; - strchr_pointer = strchr(command, '*'); - if (strtol(strchr_pointer + 1, NULL, 10) != checksum) { + if (strtol(apos + 1, NULL, 10) != checksum) { gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH)); return; } @@ -814,28 +813,26 @@ void get_command() { gcode_LastN = gcode_N; // if no errors, continue parsing } - else { // if we don't receive 'N' but still see '*' - if ((strchr(command, '*') != NULL)) { - gcode_line_error(PSTR(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM), false); - return; - } + else if (apos) { // No '*' without 'N' + gcode_line_error(PSTR(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM), false); + return; } - if (strchr(command, 'G') != NULL) { - strchr_pointer = strchr(command, 'G'); - switch (strtol(strchr_pointer + 1, NULL, 10)) { - case 0: - case 1: - case 2: - case 3: - if (IsStopped()) { + // Movement commands alert when stopped + if (IsStopped()) { + char *gpos = strchr(command, 'G'); + if (gpos) { + int codenum = strtol(gpos + 1, NULL, 10); + switch (codenum) { + case 0: + case 1: + case 2: + case 3: SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); LCD_MESSAGEPGM(MSG_STOPPED); - } - break; - default: - break; - } + break; + } + } } // If command was e-stop process now @@ -917,32 +914,32 @@ void get_command() { bool code_has_value() { int i = 1; - char c = strchr_pointer[i]; - if (c == '-' || c == '+') c = strchr_pointer[++i]; - if (c == '.') c = strchr_pointer[++i]; + char c = seen_pointer[i]; + if (c == '-' || c == '+') c = seen_pointer[++i]; + if (c == '.') c = seen_pointer[++i]; return (c >= '0' && c <= '9'); } float code_value() { float ret; - char *e = strchr(strchr_pointer, 'E'); + char *e = strchr(seen_pointer, 'E'); if (e) { *e = 0; - ret = strtod(strchr_pointer+1, NULL); + ret = strtod(seen_pointer+1, NULL); *e = 'E'; } else - ret = strtod(strchr_pointer+1, NULL); + ret = strtod(seen_pointer+1, NULL); return ret; } -long code_value_long() { return strtol(strchr_pointer + 1, NULL, 10); } +long code_value_long() { return strtol(seen_pointer + 1, NULL, 10); } -int16_t code_value_short() { return (int16_t)strtol(strchr_pointer + 1, NULL, 10); } +int16_t code_value_short() { return (int16_t)strtol(seen_pointer + 1, NULL, 10); } bool code_seen(char code) { - strchr_pointer = strchr(current_command, code); - return (strchr_pointer != NULL); //Return True if a character was found + seen_pointer = strchr(current_command, code); + return (seen_pointer != NULL); //Return True if a character was found } #define DEFINE_PGM_READ_ANY(type, reader) \ @@ -1793,6 +1790,13 @@ void gcode_get_destination() { } } +void unknown_command_error() { + SERIAL_ECHO_START; + SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); + SERIAL_ECHO(current_command); + SERIAL_ECHOPGM("\"\n"); +} + /** * G0, G1: Coordinated movement of X Y Z E axes */ @@ -2844,7 +2848,7 @@ inline void gcode_G92() { * M1: // M1 - Conditional stop - Wait for user button press on LCD */ inline void gcode_M0_M1() { - char *args = strchr_pointer + 3; + char *args = current_command + 3; millis_t codenum = 0; bool hasP = false, hasS = false; @@ -2931,7 +2935,7 @@ inline void gcode_M17() { * M23: Select a file */ inline void gcode_M23() { - card.openFile(strchr_pointer + 4, true); + card.openFile(current_command + 4, true); } /** @@ -2968,7 +2972,7 @@ inline void gcode_M17() { * M28: Start SD Write */ inline void gcode_M28() { - card.openFile(strchr_pointer + 4, false); + card.openFile(current_command + 4, false); } /** @@ -2985,7 +2989,7 @@ inline void gcode_M17() { inline void gcode_M30() { if (card.cardOK) { card.closefile(); - card.removeFile(strchr_pointer + 4); + card.removeFile(current_command + 4); } } @@ -3015,7 +3019,7 @@ inline void gcode_M31() { if (card.sdprinting) st_synchronize(); - char* args = strchr_pointer + 4; + char* args = current_command + 4; char* namestartpos = strchr(args, '!'); // Find ! to indicate filename string start. if (!namestartpos) @@ -3023,12 +3027,12 @@ inline void gcode_M31() { else namestartpos++; //to skip the '!' - bool call_procedure = code_seen('P') && (strchr_pointer < namestartpos); + bool call_procedure = code_seen('P') && (seen_pointer < namestartpos); if (card.cardOK) { card.openFile(namestartpos, true, !call_procedure); - if (code_seen('S') && strchr_pointer < namestartpos) // "S" (must occur _before_ the filename!) + if (code_seen('S') && seen_pointer < namestartpos) // "S" (must occur _before_ the filename!) card.setIndex(code_value_short()); card.startFileprint(); @@ -3041,7 +3045,7 @@ inline void gcode_M31() { * M928: Start SD Write */ inline void gcode_M928() { - card.openLogFile(strchr_pointer + 5); + card.openLogFile(current_command + 5); } #endif // SDSUPPORT @@ -3838,16 +3842,12 @@ inline void gcode_M115() { SERIAL_PROTOCOLPGM(MSG_M115_REPORT); } -#ifdef ULTIPANEL - - /** - * M117: Set LCD Status Message - */ - inline void gcode_M117() { - lcd_setstatus(strchr_pointer + 5); - } - -#endif +/** + * M117: Set LCD Status Message + */ +inline void gcode_M117() { + lcd_setstatus(current_command + 5); +} /** * M119: Output endstop states to serial output @@ -4135,10 +4135,7 @@ inline void gcode_M206() { autoretract_enabled = true; break; default: - SERIAL_ECHO_START; - SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND); - SERIAL_ECHO(current_command); - SERIAL_ECHOLNPGM("\""); + unknown_command_error(); return; } for (int i=0; i