Config files cleanup

7 years ago · 1855534f20
parent 2f5e934a19
commit 1855534f20
19 changed files with 0 additions and 19 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@ -720,7 +720,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@ -719,7 +719,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 1
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@ -703,7 +703,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@ -703,7 +703,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@ -711,7 +711,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@ -714,7 +714,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -2
 #define Z_PROBE_OFFSET_RANGE_MAX  0

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@ -720,7 +720,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@ -720,7 +720,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@ -720,7 +720,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@ -719,7 +719,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@ -735,7 +735,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@ -740,7 +740,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@ -711,7 +711,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@ -720,7 +720,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@ -822,7 +822,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@ -817,7 +817,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@ -833,7 +833,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@ -723,7 +723,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@ -716,7 +716,6 @@
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20

-
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 1