diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 084b6290b..fe77dd00e 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 2f5c5d911..dc529897f 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1591,7 +1591,7 @@ static void set_axis_is_at_home(AxisEnum axis) {
 /**
  * Some planner shorthand inline functions
  */
-inline float set_homing_bump_feedrate(AxisEnum axis) {
+inline float get_homing_bump_feedrate(AxisEnum axis) {
   const int homing_bump_divisor[] = HOMING_BUMP_DIVISOR;
   int hbd = homing_bump_divisor[axis];
   if (hbd < 1) {
@@ -1599,8 +1599,7 @@ inline float set_homing_bump_feedrate(AxisEnum axis) {
     SERIAL_ECHO_START;
     SERIAL_ECHOLNPGM("Warning: Homing Bump Divisor < 1");
   }
-  feedrate_mm_m = homing_feedrate_mm_m[axis] / hbd;
-  return feedrate_mm_m;
+  return homing_feedrate_mm_m[axis] / hbd;
 }
 //
 // line_to_current_position
@@ -1620,7 +1619,7 @@ inline void line_to_axis_pos(AxisEnum axis, float where, float fr_mm_m = 0.0) {
   current_position[axis] = where;
   feedrate_mm_m = (fr_mm_m != 0.0) ? fr_mm_m : homing_feedrate_mm_m[axis];
   planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], MMM_TO_MMS(feedrate_mm_m), active_extruder);
-  stepper.synchronize(); // The lost one
+  stepper.synchronize();
   feedrate_mm_m = old_feedrate_mm_m;
 }
 
@@ -2068,85 +2067,35 @@ static void clean_up_after_endstop_or_probe_move() {
   // at the height where the probe triggered.
   static float run_z_probe() {
 
-    float old_feedrate_mm_m = feedrate_mm_m;
-
     // Prevent stepper_inactive_time from running out and EXTRUDER_RUNOUT_PREVENT from extruding
     refresh_cmd_timeout();
 
-    #if ENABLED(DELTA)
-
-      float start_z = current_position[Z_AXIS];
-      long start_steps = stepper.position(Z_AXIS);
-
-      #if ENABLED(DEBUG_LEVELING_FEATURE)
-        if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe (DELTA) 1", current_position);
-      #endif
-
-      // move down slowly until you find the bed
-      feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS] / 4;
-      destination[Z_AXIS] = -10;
-      prepare_move_to_destination_raw(); // this will also set_current_to_destination
-      stepper.synchronize();
-      endstops.hit_on_purpose(); // clear endstop hit flags
-
-      /**
-       * We have to let the planner know where we are right now as it
-       * is not where we said to go.
-       */
-      long stop_steps = stepper.position(Z_AXIS);
-      float mm = start_z - float(start_steps - stop_steps) / planner.axis_steps_per_mm[Z_AXIS];
-      current_position[Z_AXIS] = mm;
-
-      #if ENABLED(DEBUG_LEVELING_FEATURE)
-        if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe (DELTA) 2", current_position);
-      #endif
-
-    #else // !DELTA
-
-      #if ENABLED(AUTO_BED_LEVELING_FEATURE)
-        planner.bed_level_matrix.set_to_identity();
-      #endif
-
-      feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS];
-
-      // Move down until the Z probe (or endstop?) is triggered
-      float zPosition = -(Z_MAX_LENGTH + 10);
-      line_to_z(zPosition);
-      stepper.synchronize();
-
-      // Tell the planner where we ended up - Get this from the stepper handler
-      zPosition = stepper.get_axis_position_mm(Z_AXIS);
-      planner.set_position_mm(
-        current_position[X_AXIS], current_position[Y_AXIS], zPosition,
-        current_position[E_AXIS]
-      );
-
-      // move up the retract distance
-      zPosition += home_bump_mm(Z_AXIS);
-      line_to_z(zPosition);
-      stepper.synchronize();
-      endstops.hit_on_purpose(); // clear endstop hit flags
-
-      // move back down slowly to find bed
-      set_homing_bump_feedrate(Z_AXIS);
-
-      zPosition -= home_bump_mm(Z_AXIS) * 2;
-      line_to_z(zPosition);
-      stepper.synchronize();
-      endstops.hit_on_purpose(); // clear endstop hit flags
-
-      // Get the current stepper position after bumping an endstop
-      current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
+    #if ENABLED(AUTO_BED_LEVELING_FEATURE)
+      planner.bed_level_matrix.set_to_identity();
+    #endif
 
-      #if ENABLED(DEBUG_LEVELING_FEATURE)
-        if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe", current_position);
-      #endif
+    current_position[Z_AXIS] = -(Z_MAX_LENGTH + 10);
+    do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_FAST);
+    endstops.hit_on_purpose(); // clear endstop hit flags
+    // Get the current stepper position after bumping an endstop
+    current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
+    SYNC_PLAN_POSITION_KINEMATIC(); // tell the planner where we are      feedrate_mm_m = homing_feedrate_mm_m[Z_AXIS];
 
-    #endif // !DELTA
+    // move up the retract distance
+    current_position[Z_AXIS] += home_bump_mm(Z_AXIS);
+    do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_FAST);
 
-    SYNC_PLAN_POSITION_KINEMATIC();
+    // move back down slowly to find bed
+    current_position[Z_AXIS] -= home_bump_mm(Z_AXIS) * 2;
+    do_blocking_move_to_z(current_position[Z_AXIS], Z_PROBE_SPEED_SLOW);
+    endstops.hit_on_purpose(); // clear endstop hit flags
+    // Get the current stepper position after bumping an endstop
+    current_position[Z_AXIS] = stepper.get_axis_position_mm(Z_AXIS);
+    SYNC_PLAN_POSITION_KINEMATIC(); // tell the planner where we are
 
-    feedrate_mm_m = old_feedrate_mm_m;
+    #if ENABLED(DEBUG_LEVELING_FEATURE)
+      if (DEBUGGING(LEVELING)) DEBUG_POS("run_z_probe", current_position);
+    #endif
 
     return current_position[Z_AXIS];
   }
@@ -2431,7 +2380,7 @@ static void homeaxis(AxisEnum axis) {
   line_to_axis_pos(axis, -home_bump_mm(axis) * axis_home_dir);
 
   // Move slowly towards the endstop until triggered
-  line_to_axis_pos(axis, 2 * home_bump_mm(axis) * axis_home_dir, set_homing_bump_feedrate(axis));
+  line_to_axis_pos(axis, 2 * home_bump_mm(axis) * axis_home_dir, get_homing_bump_feedrate(axis));
 
   #if ENABLED(DEBUG_LEVELING_FEATURE)
     if (DEBUGGING(LEVELING)) DEBUG_POS("> TRIGGER ENDSTOP", current_position);
diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h
index db188b82e..c0e1d3369 100644
--- a/Marlin/example_configurations/Cartesio/Configuration.h
+++ b/Marlin/example_configurations/Cartesio/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index d486589a1..a70ee1340 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -481,6 +481,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h
index b751dee80..fe9068244 100644
--- a/Marlin/example_configurations/Felix/DUAL/Configuration.h
+++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h
@@ -479,6 +479,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index 96a4287cc..5013b505b 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -491,6 +491,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h
index 9027007c8..98d2d4ffa 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration.h
@@ -493,6 +493,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index f0b30f861..f562b8a78 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -516,6 +516,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h
index c9c649a66..bc106ea47 100644
--- a/Marlin/example_configurations/K8400/Configuration.h
+++ b/Marlin/example_configurations/K8400/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
index 4212cddc8..e49bac657 100644
--- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h
+++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
index 38c1d546c..93331357a 100644
--- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h
index 540b3f696..b3a35bf11 100644
--- a/Marlin/example_configurations/RigidBot/Configuration.h
+++ b/Marlin/example_configurations/RigidBot/Configuration.h
@@ -496,6 +496,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 3d534f72e..d9fa05ae2 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -507,6 +507,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h
index 9e56cdd3c..fbcd5e77b 100644
--- a/Marlin/example_configurations/TAZ4/Configuration.h
+++ b/Marlin/example_configurations/TAZ4/Configuration.h
@@ -520,6 +520,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index 650a21c01..014f85fc8 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -491,6 +491,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
index 179cbb999..a5718d6e1 100644
--- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h
+++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h
@@ -499,6 +499,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h
index ff70e8ce9..b745d4f80 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h
@@ -541,6 +541,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index a623e984c..4db009181 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -541,6 +541,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index 3f35411f4..8599d74bb 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -541,6 +541,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 4000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
index 7dc141227..8cfd21994 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h
@@ -532,6 +532,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
index 939210591..97e656aeb 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h
@@ -539,6 +539,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe
 // Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN.
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index d26549afb..693c95119 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -502,6 +502,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index 9d3f10201..f516ff978 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -489,6 +489,10 @@
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
+// Speed for the first approach when probing
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+// Speed for the second approach when probing
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 //
 // Allen Key Probe is defined in the Delta example configurations.