diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index 105c78690..b6cd3e1e9 100644 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -88,17 +88,6 @@ * * L # Layer Layer height. (Height of nozzle above bed) If not specified .20mm will be used. * - * Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and - * un-retraction is at 1.2mm These numbers will be scaled by the specified amount - * - * M # Random Randomize the order that the circles are drawn on the bed. The search for the closest - * undrawn cicle is still done. But the distance to the location for each circle has a - * random number of the size specified added to it. Specifying R50 will give an interesting - * deviation from the normal behaviour on a 10 x 10 Mesh. - - * N # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed. - * 'n' can be used instead if your host program does not appreciate you using 'N'. - * * O # Ooooze How much your nozzle will Ooooze filament while getting in position to print. This * is over kill, but using this parameter will let you get the very first 'circle' perfect * so you have a trophy to peel off of the bed and hang up to show how perfectly you have your @@ -111,10 +100,20 @@ * printing the Mesh. You can carefully remove the spent filament with a needle nose * pliers while holding the LCD Click wheel in a depressed state. * + * Q # Multiplier Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and + * un-retraction is at 1.2mm These numbers will be scaled by the specified amount + * * R # Repeat Prints the number of patterns given as a parameter, starting at the current location. * If a parameter isn't given, every point will be printed unless G26 is interrupted. * This works the same way that the UBL G29 P4 R parameter works. * + * S # Nozzle Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed. + * + * U # Random Randomize the order that the circles are drawn on the bed. The search for the closest + * undrawn cicle is still done. But the distance to the location for each circle has a + * random number of the size specified added to it. Specifying S50 will give an interesting + * deviation from the normal behaviour on a 10 x 10 Mesh. + * * X # X Coord. Specify the starting location of the drawing activity. * * Y # Y Coord. Specify the starting location of the drawing activity. @@ -686,7 +685,7 @@ } } - if (code_seen('N') || code_seen('n')) { // Warning! Use of 'N' / lowercase flouts established standards. + if (code_seen('S')) { nozzle = code_value_float(); if (!WITHIN(nozzle, 0.1, 1.0)) { SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible."); @@ -728,9 +727,8 @@ } } - if (code_seen('M')) { // Warning! Use of 'M' flouts established standards. + if (code_seen('U')) { randomSeed(millis()); - // This setting will persist for the next G26 random_deviation = code_has_value() ? code_value_float() : 50.0; } diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 3269de46a..70d5f36e6 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -5761,7 +5761,7 @@ inline void gcode_M31() { /** * M32: Select file and start SD Print */ - inline void gcode_M32() { + inline void gcode_M32() { // Why is M32 allowed to flout the sacred GCode standard? if (card.sdprinting) stepper.synchronize(); diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 0259be69b..629eaaae0 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -116,8 +116,7 @@ * invalidate. * * J # Grid * Perform a Grid Based Leveling of the current Mesh using a grid with n points on a side. - * - * j EEPROM Dump This function probably goes away after debug is complete. + * Not specifying a grid size will invoke the 3-Point leveling function. * * K # Kompare Kompare current Mesh with stored Mesh # replacing current Mesh with the result. This * command literally performs a diff between two Meshes. @@ -264,8 +263,6 @@ * at a later date. The GCode output can be saved and later replayed by the host software * to reconstruct the current mesh on another machine. * - * T 3-Point Perform a 3 Point Bed Leveling on the current Mesh - * * U Unlevel Perform a probe of the outer perimeter to assist in physically leveling unlevel beds. * Only used for G29 P1 O U It will speed up the probing of the edge of the bed. This * is useful when the entire bed does not need to be probed because it will be adjusted. @@ -276,12 +273,6 @@ * * Y # * * Y Location for this line of commands * - * Z Zero * Probes to set the Z Height of the nozzle. The entire Mesh can be raised or lowered - * by just doing a G29 Z - * - * Z # Zero * The entire Mesh can be raised or lowered to conform with the specified difference. - * zprobe_zoffset is added to the calculation. - * * * Release Notes: * You MUST do M502, M500 to initialize the storage. Failure to do this will cause all @@ -329,7 +320,7 @@ } // Don't allow auto-leveling without homing first - if (!(code_seen('N') && code_value_bool()) && axis_unhomed_error()) // Warning! Use of 'N' flouts established standards. + if (axis_unhomed_error()) home_all_axes(); if (g29_parameter_parsing()) return; // abort if parsing the simple parameters causes a problem, @@ -353,13 +344,16 @@ } if (code_seen('Q')) { - const int test_pattern = code_has_value() ? code_value_int() : -1; - if (!WITHIN(test_pattern, 0, 2)) { + const int test_pattern = code_has_value() ? code_value_int() : -99; + if (!WITHIN(test_pattern, -1, 2)) { SERIAL_PROTOCOLLNPGM("Invalid test_pattern value. (0-2)\n"); return; } SERIAL_PROTOCOLLNPGM("Loading test_pattern values.\n"); switch (test_pattern) { + case -1: + g29_eeprom_dump(); + break; case 0: for (uint8_t x = 0; x < GRID_MAX_POINTS_X; x++) { // Create a bowl shape - similar to for (uint8_t y = 0; y < GRID_MAX_POINTS_Y; y++) { // a poorly calibrated Delta. @@ -385,9 +379,33 @@ } if (code_seen('J')) { - ubl.save_ubl_active_state_and_disable(); - ubl.tilt_mesh_based_on_probed_grid(code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards. - ubl.restore_ubl_active_state_and_leave(); + if (grid_size!=0) { // if not 0 it is a normal n x n grid being probed + ubl.save_ubl_active_state_and_disable(); + ubl.tilt_mesh_based_on_probed_grid(code_seen('O')); + ubl.restore_ubl_active_state_and_leave(); + } else { // grid_size==0 which means a 3-Point leveling has been requested + float z1 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y), false, g29_verbose_level), + z2 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y), false, g29_verbose_level), + z3 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y), true, g29_verbose_level); + + if ( isnan(z1) || isnan(z2) || isnan(z3)) { // probe_pt will return NAN if unreachable + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM("Attempt to probe off the bed."); + goto LEAVE; + } + + // We need to adjust z1, z2, z3 by the Mesh Height at these points. Just because they are non-zero doesn't mean + // the Mesh is tilted! (We need to compensate each probe point by what the Mesh says that location's height is) + + ubl.save_ubl_active_state_and_disable(); + z1 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y)) /* + zprobe_zoffset */ ; + z2 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y)) /* + zprobe_zoffset */ ; + z3 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y)) /* + zprobe_zoffset */ ; + + do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y))); + ubl.tilt_mesh_based_on_3pts(z1, z2, z3); + ubl.restore_ubl_active_state_and_leave(); + } } if (code_seen('P')) { @@ -420,7 +438,7 @@ SERIAL_PROTOCOLLNPGM(").\n"); } ubl.probe_entire_mesh(x_pos + X_PROBE_OFFSET_FROM_EXTRUDER, y_pos + Y_PROBE_OFFSET_FROM_EXTRUDER, - code_seen('O') || code_seen('M'), code_seen('E'), code_seen('U')); // Warning! Use of 'M' flouts established standards. + code_seen('O'), code_seen('E'), code_seen('U')); break; case 2: { @@ -469,7 +487,7 @@ return; } - manually_probe_remaining_mesh(x_pos, y_pos, height, card_thickness, code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards. + manually_probe_remaining_mesh(x_pos, y_pos, height, card_thickness, code_seen('O')); SERIAL_PROTOCOLLNPGM("G29 P2 finished."); } break; @@ -505,7 +523,7 @@ // // Fine Tune (i.e., Edit) the Mesh // - fine_tune_mesh(x_pos, y_pos, code_seen('O') || code_seen('M')); // Warning! Use of 'M' flouts established standards. + fine_tune_mesh(x_pos, y_pos, code_seen('O')); break; case 5: ubl.find_mean_mesh_height(); break; @@ -515,43 +533,12 @@ } - if (code_seen('T')) { - - float z1 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y), false, g29_verbose_level), - z2 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y), false, g29_verbose_level), - z3 = probe_pt(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y), true, g29_verbose_level); - - if ( isnan(z1) || isnan(z2) || isnan(z3)) { // probe_pt will return NAN if unreachable - SERIAL_ERROR_START; - SERIAL_ERRORLNPGM("Attempt to probe off the bed."); - goto LEAVE; - } - - // We need to adjust z1, z2, z3 by the Mesh Height at these points. Just because they are non-zero doesn't mean - // the Mesh is tilted! (We need to compensate each probe point by what the Mesh says that location's height is) - - ubl.save_ubl_active_state_and_disable(); - z1 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_1_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_1_Y)) /* + zprobe_zoffset */ ; - z2 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y)) /* + zprobe_zoffset */ ; - z3 -= ubl.get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y)) /* + zprobe_zoffset */ ; - - do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y))); - ubl.tilt_mesh_based_on_3pts(z1, z2, z3); - ubl.restore_ubl_active_state_and_leave(); - } - // // Much of the 'What?' command can be eliminated. But until we are fully debugged, it is // good to have the extra information. Soon... we prune this to just a few items // if (code_seen('W')) ubl.g29_what_command(); - // - // When we are fully debugged, the EEPROM dump command will get deleted also. But - // right now, it is good to have the extra information. Soon... we prune this. - // - if (code_seen('j')) g29_eeprom_dump(); // Warning! Use of lowercase flouts established standards. - // // When we are fully debugged, this may go away. But there are some valid // use cases for the users. So we can wait and see what to do with it. @@ -614,9 +601,12 @@ SERIAL_PROTOCOLLNPGM("Done.\n"); } - if (code_seen('O') || code_seen('M')) // Warning! Use of 'M' flouts established standards. + if (code_seen('O')) ubl.display_map(code_has_value() ? code_value_int() : 0); + /* + * This code may not be needed... Prepare for its removal... + * if (code_seen('Z')) { if (code_has_value()) ubl.state.z_offset = code_value_float(); // do the simple case. Just lock in the specified value @@ -669,6 +659,7 @@ ubl.restore_ubl_active_state_and_leave(); } } + */ LEAVE: @@ -1069,8 +1060,8 @@ } if (code_seen('J')) { - grid_size = code_has_value() ? code_value_int() : 3; - if (!WITHIN(grid_size, 2, 9)) { + grid_size = code_has_value() ? code_value_int() : 0; + if (grid_size!=0 && !WITHIN(grid_size, 2, 9)) { SERIAL_PROTOCOLLNPGM("?Invalid grid size (J) specified (2-9).\n"); err_flag = true; } @@ -1126,43 +1117,9 @@ SERIAL_PROTOCOLLNPGM("Invalid map type.\n"); return UBL_ERR; } - - // Check if a map type was specified - if (code_seen('M')) { // Warning! Use of 'M' flouts established standards. - map_type = code_has_value() ? code_value_int() : 0; - if (!WITHIN(map_type, 0, 1)) { - SERIAL_PROTOCOLLNPGM("Invalid map type.\n"); - return UBL_ERR; - } - } - return UBL_OK; } - /** - * This function goes away after G29 debug is complete. But for right now, it is a handy - * routine to dump binary data structures. - */ - /* - void dump(char * const str, const float &f) { - char *ptr; - - SERIAL_PROTOCOL(str); - SERIAL_PROTOCOL_F(f, 8); - SERIAL_PROTOCOLPGM(" "); - ptr = (char*)&f; - for (uint8_t i = 0; i < 4; i++) - SERIAL_PROTOCOLPAIR(" ", hex_byte(*ptr++)); - SERIAL_PROTOCOLPAIR(" isnan()=", isnan(f)); - SERIAL_PROTOCOLPAIR(" isinf()=", isinf(f)); - - if (f == -INFINITY) - SERIAL_PROTOCOLPGM(" Minus Infinity detected."); - - SERIAL_EOL; - } - //*/ - static int ubl_state_at_invocation = 0, ubl_state_recursion_chk = 0; diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index 1d59e31b9..2cc4767dd 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -55,12 +55,8 @@ dy = current_position[Y_AXIS] - destination[Y_AXIS], xy_dist = HYPOT(dx, dy); - if (xy_dist == 0.0) { - return; - //SERIAL_ECHOPGM(" FPMM="); - //const float fpmm = de / xy_dist; - //SERIAL_PROTOCOL_F(fpmm, 6); - } + if (xy_dist == 0.0) + return; else { SERIAL_ECHOPGM(" fpmm="); const float fpmm = de / xy_dist; @@ -276,16 +272,7 @@ */ if (y != start[Y_AXIS]) { if (!inf_normalized_flag) { - - //on_axis_distance = y - start[Y_AXIS]; on_axis_distance = use_x_dist ? x - start[X_AXIS] : y - start[Y_AXIS]; - - //on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : y - start[Y_AXIS]; - //on_axis_distance = use_x_dist ? x - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS]; - - //on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : y - start[Y_AXIS]; - //on_axis_distance = use_x_dist ? x - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } @@ -350,13 +337,7 @@ */ if (x != start[X_AXIS]) { if (!inf_normalized_flag) { - - //on_axis_distance = x - start[X_AXIS]; on_axis_distance = use_x_dist ? x - start[X_AXIS] : y - start[Y_AXIS]; - - //on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : y - start[Y_AXIS]; - //on_axis_distance = use_x_dist ? x - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; // is based on X or Y because this is a horizontal move z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } @@ -613,20 +594,14 @@ cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1); cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1); - // float x0 = (UBL_MESH_MIN_X) + ((MESH_X_DIST) * cell_xi ); // lower left cell corner - // float y0 = (UBL_MESH_MIN_Y) + ((MESH_Y_DIST) * cell_yi ); // lower left cell corner - // float x1 = x0 + MESH_X_DIST; // upper right cell corner - // float y1 = y0 + MESH_Y_DIST; // upper right cell corner - const float x0 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi ])), // 64 byte table lookup avoids mul+add y0 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi ])), // 64 byte table lookup avoids mul+add x1 = pgm_read_float(&(ubl.mesh_index_to_xpos[cell_xi+1])), // 64 byte table lookup avoids mul+add - y1 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi+1])), // 64 byte table lookup avoids mul+add - - cx = rx - x0, // cell-relative x - cy = ry - y0; // cell-relative y + y1 = pgm_read_float(&(ubl.mesh_index_to_ypos[cell_yi+1])); // 64 byte table lookup avoids mul+add - float z_x0y0 = ubl.z_values[cell_xi ][cell_yi ], // z at lower left corner + float cx = rx - x0, // cell-relative x + cy = ry - y0; // cell-relative y + z_x0y0 = ubl.z_values[cell_xi ][cell_yi ], // z at lower left corner z_x1y0 = ubl.z_values[cell_xi+1][cell_yi ], // z at upper left corner z_x0y1 = ubl.z_values[cell_xi ][cell_yi+1], // z at lower right corner z_x1y1 = ubl.z_values[cell_xi+1][cell_yi+1]; // z at upper right corner