From a5212bf277a4b880a3f90974ff79ff4351cc42c0 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 24 Jul 2016 13:36:00 -0700 Subject: [PATCH 1/2] Sanity check for too many temp sensors --- Marlin/SanityCheck.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 5eea066a6..299a7cc76 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -564,8 +564,20 @@ #elif !PIN_EXISTS(TEMP_3) #error "TEMP_3_PIN not defined for this board." #endif + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 3 extruders." #endif - #endif + #elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 2 extruders." + #elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 2 extruders." + #endif +#elif TEMP_SENSOR_1 != 0 && DISABLED(TEMP_SENSOR_1_AS_REDUNDANT) + #error "TEMP_SENSOR_1 shouldn't be set with only 1 extruder." +#elif TEMP_SENSOR_2 != 0 + #error "TEMP_SENSOR_2 shouldn't be set with only 1 extruder." +#elif TEMP_SENSOR_3 != 0 + #error "TEMP_SENSOR_3 shouldn't be set with only 1 extruder." #endif #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT) && TEMP_SENSOR_1 == 0 From bedda3be61c2033dab7a055c154ca281f0815120 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 24 Jul 2016 15:24:40 -0700 Subject: [PATCH 2/2] Patch generic delta error caught by sanity check --- Marlin/example_configurations/delta/generic/Configuration.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index cb84cb96c..e25730952 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -239,7 +239,7 @@ //#define DUMMY_THERMISTOR_999_VALUE 100 // :{ '0': "Not used",'1':"100k / 4.7k - EPCOS",'2':"200k / 4.7k - ATC Semitec 204GT-2",'3':"Mendel-parts / 4.7k",'4':"10k !! do not use for a hotend. Bad resolution at high temp. !!",'5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)",'6':"100k / 4.7k EPCOS - Not as accurate as Table 1",'7':"100k / 4.7k Honeywell 135-104LAG-J01",'8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT",'9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1",'10':"100k / 4.7k RS 198-961",'11':"100k / 4.7k beta 3950 1%",'12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)",'13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'",'20':"PT100 (Ultimainboard V2.x)",'51':"100k / 1k - EPCOS",'52':"200k / 1k - ATC Semitec 204GT-2",'55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)",'60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950",'66':"Dyze Design 4.7M High Temperature thermistor",'70':"the 100K thermistor found in the bq Hephestos 2",'71':"100k / 4.7k Honeywell 135-104LAF-J01",'147':"Pt100 / 4.7k",'1047':"Pt1000 / 4.7k",'110':"Pt100 / 1k (non-standard)",'1010':"Pt1000 / 1k (non standard)",'-3':"Thermocouple + MAX31855 (only for sensor 0)",'-2':"Thermocouple + MAX6675 (only for sensor 0)",'-1':"Thermocouple + AD595",'998':"Dummy 1",'999':"Dummy 2" } #define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 -1 +#define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 0