diff --git a/.travis.yml b/.travis.yml
index 954bcefe1..710bd364a 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -121,7 +121,7 @@ script:
   - opt_enable NUM_SERVOS Z_ENDSTOP_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
   - opt_set NUM_SERVOS 1
   - opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
-  - opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
+  - opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
   - build_marlin
   #
   # Test MESH_BED_LEVELING feature, with LCD
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 0f7234d6a..8803004f7 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 25e6fe95a..e423474af 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -8446,92 +8446,107 @@ inline void gcode_M114() {
 /**
  * M115: Capabilities string
  */
+
+#if ENABLED(EXTENDED_CAPABILITIES_REPORT)
+  static void cap_line(const char * const name, bool ena=false) {
+    SERIAL_PROTOCOLPGM("Cap:");
+    serialprintPGM(name);
+    SERIAL_PROTOCOLLN(int(ena ? 1 : 0));
+  }
+#endif
+
 inline void gcode_M115() {
   SERIAL_PROTOCOLLNPGM(MSG_M115_REPORT);
 
   #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
 
     // SERIAL_XON_XOFF
-    #if ENABLED(SERIAL_XON_XOFF)
-      SERIAL_PROTOCOLLNPGM("Cap:SERIAL_XON_XOFF:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:SERIAL_XON_XOFF:0");
-    #endif
+    cap_line(PSTR("SERIAL_XON_XOFF")
+      #if ENABLED(SERIAL_XON_XOFF)
+        , true
+      #endif
+    );
 
     // EEPROM (M500, M501)
-    #if ENABLED(EEPROM_SETTINGS)
-      SERIAL_PROTOCOLLNPGM("Cap:EEPROM:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:EEPROM:0");
-    #endif
+    cap_line(PSTR("EEPROM")
+      #if ENABLED(EEPROM_SETTINGS)
+        , true
+      #endif
+    );
+
+    // Volumetric Extrusion (M200)
+    cap_line(PSTR("VOLUMETRIC")
+      #if DISABLED(NO_VOLUMETRICS)
+        , true
+      #endif
+    );
 
     // AUTOREPORT_TEMP (M155)
-    #if ENABLED(AUTO_REPORT_TEMPERATURES)
-      SERIAL_PROTOCOLLNPGM("Cap:AUTOREPORT_TEMP:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:AUTOREPORT_TEMP:0");
-    #endif
+    cap_line(PSTR("AUTOREPORT_TEMP")
+      #if ENABLED(AUTO_REPORT_TEMPERATURES)
+        , true
+      #endif
+    );
 
     // PROGRESS (M530 S L, M531 <file>, M532 X L)
-    SERIAL_PROTOCOLLNPGM("Cap:PROGRESS:0");
+    cap_line(PSTR("PROGRESS"));
 
     // Print Job timer M75, M76, M77
-    SERIAL_PROTOCOLLNPGM("Cap:PRINT_JOB:1");
+    cap_line(PSTR("PRINT_JOB"), true);
 
     // AUTOLEVEL (G29)
-    #if HAS_ABL
-      SERIAL_PROTOCOLLNPGM("Cap:AUTOLEVEL:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:AUTOLEVEL:0");
-    #endif
+    cap_line(PSTR("AUTOLEVEL")
+      #if HAS_AUTOLEVEL
+        , true
+      #endif
+    );
 
     // Z_PROBE (G30)
-    #if HAS_BED_PROBE
-      SERIAL_PROTOCOLLNPGM("Cap:Z_PROBE:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:Z_PROBE:0");
-    #endif
+    cap_line(PSTR("Z_PROBE")
+      #if HAS_BED_PROBE
+        , true
+      #endif
+    );
 
     // MESH_REPORT (M420 V)
-    #if HAS_LEVELING
-      SERIAL_PROTOCOLLNPGM("Cap:LEVELING_DATA:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:LEVELING_DATA:0");
-    #endif
+    cap_line(PSTR("LEVELING_DATA")
+      #if HAS_LEVELING
+        , true
+      #endif
+    );
 
     // BUILD_PERCENT (M73)
-    #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
-      SERIAL_PROTOCOLLNPGM("Cap:BUILD_PERCENT:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:BUILD_PERCENT:0");
-    #endif
+    cap_line(PSTR("BUILD_PERCENT")
+      #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+        , true
+      #endif
+    );
 
     // SOFTWARE_POWER (M80, M81)
-    #if HAS_POWER_SWITCH
-      SERIAL_PROTOCOLLNPGM("Cap:SOFTWARE_POWER:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:SOFTWARE_POWER:0");
-    #endif
+    cap_line(PSTR("SOFTWARE_POWER")
+      #if HAS_POWER_SWITCH
+        , true
+      #endif
+    );
 
     // CASE LIGHTS (M355)
-    #if HAS_CASE_LIGHT
-      SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:1");
-      if (USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) {
-        SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:1");
-      }
-      else
-        SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:0");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:TOGGLE_LIGHTS:0");
-      SERIAL_PROTOCOLLNPGM("Cap:CASE_LIGHT_BRIGHTNESS:0");
-    #endif
+    cap_line(PSTR("TOGGLE_LIGHTS")
+      #if HAS_CASE_LIGHT
+        , true
+      #endif
+    );
+    cap_line(PSTR("CASE_LIGHT_BRIGHTNESS")
+      #if HAS_CASE_LIGHT
+        , USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)
+      #endif
+    );
 
     // EMERGENCY_PARSER (M108, M112, M410)
-    #if ENABLED(EMERGENCY_PARSER)
-      SERIAL_PROTOCOLLNPGM("Cap:EMERGENCY_PARSER:1");
-    #else
-      SERIAL_PROTOCOLLNPGM("Cap:EMERGENCY_PARSER:0");
-    #endif
+    cap_line(PSTR("EMERGENCY_PARSER")
+      #if ENABLED(EMERGENCY_PARSER)
+        , true
+      #endif
+    );
 
   #endif // EXTENDED_CAPABILITIES_REPORT
 }
@@ -8669,25 +8684,29 @@ inline void gcode_M121() { endstops.enable_globally(false); }
 
 #endif // HAS_COLOR_LEDS
 
-/**
- * M200: Set filament diameter and set E axis units to cubic units
- *
- *    T<extruder> - Optional extruder number. Current extruder if omitted.
- *    D<linear> - Diameter of the filament. Use "D0" to switch back to linear units on the E axis.
- */
-inline void gcode_M200() {
+#if DISABLED(NO_VOLUMETRICS)
+
+  /**
+   * M200: Set filament diameter and set E axis units to cubic units
+   *
+   *    T<extruder> - Optional extruder number. Current extruder if omitted.
+   *    D<linear> - Diameter of the filament. Use "D0" to switch back to linear units on the E axis.
+   */
+  inline void gcode_M200() {
 
-  if (get_target_extruder_from_command(200)) return;
+    if (get_target_extruder_from_command(200)) return;
 
-  if (parser.seen('D')) {
-    // setting any extruder filament size disables volumetric on the assumption that
-    // slicers either generate in extruder values as cubic mm or as as filament feeds
-    // for all extruders
-    if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0.0)) )
-      planner.set_filament_size(target_extruder, parser.value_linear_units());
+    if (parser.seen('D')) {
+      // setting any extruder filament size disables volumetric on the assumption that
+      // slicers either generate in extruder values as cubic mm or as as filament feeds
+      // for all extruders
+      if ( (parser.volumetric_enabled = (parser.value_linear_units() != 0.0)) )
+        planner.set_filament_size(target_extruder, parser.value_linear_units());
+    }
+    planner.calculate_volumetric_multipliers();
   }
-  planner.calculate_volumetric_multipliers();
-}
+
+#endif // !NO_VOLUMETRICS
 
 /**
  * M201: Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
@@ -12036,9 +12055,12 @@ void process_parsed_command() {
         #endif
       #endif
 
-      case 200: // M200: Set filament diameter, E to cubic units
-        gcode_M200();
-        break;
+      #if DISABLED(NO_VOLUMETRICS)
+        case 200: // M200: Set filament diameter, E to cubic units
+          gcode_M200();
+          break;
+      #endif
+
       case 201: // M201: Set max acceleration for print moves (units/s^2)
         gcode_M201();
         break;
diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h
index 95fd369cb..8002bc039 100644
--- a/Marlin/SanityCheck.h
+++ b/Marlin/SanityCheck.h
@@ -901,8 +901,12 @@ static_assert(1 >= 0
 /**
  * Filament Width Sensor
  */
-#if ENABLED(FILAMENT_WIDTH_SENSOR) && !HAS_FILAMENT_WIDTH_SENSOR
-  #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+  #if !HAS_FILAMENT_WIDTH_SENSOR
+    #error "FILAMENT_WIDTH_SENSOR requires a FILWIDTH_PIN to be defined."
+  #elif ENABLED(NO_VOLUMETRICS)
+    #error "FILAMENT_WIDTH_SENSOR requires NO_VOLUMETRICS to be disabled."
+  #endif
 #endif
 
 /**
diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp
index da01f0549..7710ceb3d 100644
--- a/Marlin/configuration_store.cpp
+++ b/Marlin/configuration_store.cpp
@@ -238,7 +238,9 @@ void MarlinSettings::postprocess() {
     thermalManager.updatePID();
   #endif
 
-  planner.calculate_volumetric_multipliers();
+  #if DISABLED(NO_VOLUMETRICS)
+    planner.calculate_volumetric_multipliers();
+  #endif
 
   #if HAS_HOME_OFFSET || ENABLED(DUAL_X_CARRIAGE)
     // Software endstops depend on home_offset
@@ -566,13 +568,20 @@ void MarlinSettings::postprocess() {
     EEPROM_WRITE(swap_retract_recover_length);
     EEPROM_WRITE(swap_retract_recover_feedrate_mm_s);
 
-    EEPROM_WRITE(parser.volumetric_enabled);
+    //
+    // Volumetric & Filament Size
+    //
+    #if DISABLED(NO_VOLUMETRICS)
 
-    // Save filament sizes
-    for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
-      if (q < COUNT(planner.filament_size)) dummy = planner.filament_size[q];
-      EEPROM_WRITE(dummy);
-    }
+      EEPROM_WRITE(parser.volumetric_enabled);
+
+      // Save filament sizes
+      for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
+        if (q < COUNT(planner.filament_size)) dummy = planner.filament_size[q];
+        EEPROM_WRITE(dummy);
+      }
+
+    #endif // !NO_VOLUMETRICS
 
     // Save TMC2130 or TMC2208 Configuration, and placeholder values
     uint16_t val;
@@ -1053,12 +1062,16 @@ void MarlinSettings::postprocess() {
       //
       // Volumetric & Filament Size
       //
+      #if DISABLED(NO_VOLUMETRICS)
 
-      EEPROM_READ(parser.volumetric_enabled);
-      for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
-        EEPROM_READ(dummy);
-        if (q < COUNT(planner.filament_size)) planner.filament_size[q] = dummy;
-      }
+        EEPROM_READ(parser.volumetric_enabled);
+
+        for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) {
+          EEPROM_READ(dummy);
+          if (q < COUNT(planner.filament_size)) planner.filament_size[q] = dummy;
+        }
+
+      #endif
 
       //
       // TMC2130 Stepper Current
@@ -1502,15 +1515,19 @@ void MarlinSettings::reset() {
     swap_retract_recover_feedrate_mm_s = RETRACT_RECOVER_FEEDRATE_SWAP;
   #endif // FWRETRACT
 
-  parser.volumetric_enabled =
-    #if ENABLED(VOLUMETRIC_DEFAULT_ON)
-      true
-    #else
-      false
-    #endif
-  ;
-  for (uint8_t q = 0; q < COUNT(planner.filament_size); q++)
-    planner.filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA;
+  #if DISABLED(NO_VOLUMETRICS)
+
+    parser.volumetric_enabled =
+      #if ENABLED(VOLUMETRIC_DEFAULT_ON)
+        true
+      #else
+        false
+      #endif
+    ;
+    for (uint8_t q = 0; q < COUNT(planner.filament_size); q++)
+      planner.filament_size[q] = DEFAULT_NOMINAL_FILAMENT_DIA;
+
+  #endif
 
   endstops.enable_globally(
     #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT)
@@ -1648,46 +1665,50 @@ void MarlinSettings::reset() {
 
     SERIAL_EOL();
 
-    /**
-     * Volumetric extrusion M200
-     */
-    if (!forReplay) {
-      CONFIG_ECHO_START;
-      SERIAL_ECHOPGM("Filament settings:");
-      if (parser.volumetric_enabled)
-        SERIAL_EOL();
-      else
-        SERIAL_ECHOLNPGM(" Disabled");
-    }
+    #if DISABLED(NO_VOLUMETRICS)
+
+      /**
+       * Volumetric extrusion M200
+       */
+      if (!forReplay) {
+        CONFIG_ECHO_START;
+        SERIAL_ECHOPGM("Filament settings:");
+        if (parser.volumetric_enabled)
+          SERIAL_EOL();
+        else
+          SERIAL_ECHOLNPGM(" Disabled");
+      }
 
-    CONFIG_ECHO_START;
-    SERIAL_ECHOPAIR("  M200 D", LINEAR_UNIT(planner.filament_size[0]));
-    SERIAL_EOL();
-    #if EXTRUDERS > 1
       CONFIG_ECHO_START;
-      SERIAL_ECHOPAIR("  M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
+      SERIAL_ECHOPAIR("  M200 D", LINEAR_UNIT(planner.filament_size[0]));
       SERIAL_EOL();
-      #if EXTRUDERS > 2
+      #if EXTRUDERS > 1
         CONFIG_ECHO_START;
-        SERIAL_ECHOPAIR("  M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
+        SERIAL_ECHOPAIR("  M200 T1 D", LINEAR_UNIT(planner.filament_size[1]));
         SERIAL_EOL();
-        #if EXTRUDERS > 3
+        #if EXTRUDERS > 2
           CONFIG_ECHO_START;
-          SERIAL_ECHOPAIR("  M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
+          SERIAL_ECHOPAIR("  M200 T2 D", LINEAR_UNIT(planner.filament_size[2]));
           SERIAL_EOL();
-          #if EXTRUDERS > 4
+          #if EXTRUDERS > 3
             CONFIG_ECHO_START;
-            SERIAL_ECHOPAIR("  M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
+            SERIAL_ECHOPAIR("  M200 T3 D", LINEAR_UNIT(planner.filament_size[3]));
             SERIAL_EOL();
-          #endif // EXTRUDERS > 4
-        #endif // EXTRUDERS > 3
-      #endif // EXTRUDERS > 2
-    #endif // EXTRUDERS > 1
+            #if EXTRUDERS > 4
+              CONFIG_ECHO_START;
+              SERIAL_ECHOPAIR("  M200 T4 D", LINEAR_UNIT(planner.filament_size[4]));
+              SERIAL_EOL();
+            #endif // EXTRUDERS > 4
+          #endif // EXTRUDERS > 3
+        #endif // EXTRUDERS > 2
+      #endif // EXTRUDERS > 1
 
-    if (!parser.volumetric_enabled) {
-      CONFIG_ECHO_START;
-      SERIAL_ECHOLNPGM("  M200 D0");
-    }
+      if (!parser.volumetric_enabled) {
+        CONFIG_ECHO_START;
+        SERIAL_ECHOLNPGM("  M200 D0");
+      }
+
+    #endif
 
     if (!forReplay) {
       CONFIG_ECHO_START;
diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index 5eb56dcfd..c1aaeb4b1 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index dad62f700..ff27fb9a2 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 05c9befe6..f2644b7ff 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index f610717e4..9be30ed4a 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 03decf76f..a7742ab97 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index f610717e4..9be30ed4a 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 4f1084c5d..3274529e6 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 25e631d22..811120766 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1379,13 +1379,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 903ea8d09..e160214ba 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index e6ff3e506..18589d399 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index 4a0ae9b12..7129862d1 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 //#define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index d5685033a..2aca91b10 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 49dffb376..e5bd595c9 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1377,13 +1377,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index c1d49a5b9..a24e54576 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 791f8cefb..845b16e51 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index a447bfa49..7c755597f 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1343,13 +1343,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index a15ee4439..1e75c2200 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index e8e25031a..677c8bf06 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1387,13 +1387,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index 06517f43e..89f7f6fef 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index a9383c7de..1c5cc06ad 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 910c4b740..1ba8825da 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index a2c7a0242..91ff478da 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index a2c7a0242..91ff478da 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index a2c7a0242..91ff478da 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 0ed880e23..297c3b658 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1383,13 +1383,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index e2bc53b0c..c5df70e4a 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1378,13 +1378,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index 5c1f232d9..e94c72b1e 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 51704a8c7..f4409c9ee 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 1c035e7c9..5ce261587 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1376,13 +1376,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 6a394e9bb..33c3ebb02 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1366,13 +1366,20 @@
 #define EXTENDED_CAPABILITIES_REPORT
 
 /**
- * Volumetric extrusion default state
- * Activate to make volumetric extrusion the default method,
- * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
- *
- * M200 D0 to disable, M200 Dn to set a new diameter.
+ * Disable all Volumetric extrusion options
  */
-//#define VOLUMETRIC_DEFAULT_ON
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+  /**
+   * Volumetric extrusion default state
+   * Activate to make volumetric extrusion the default method,
+   * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+   *
+   * M200 D0 to disable, M200 Dn to set a new diameter.
+   */
+  //#define VOLUMETRIC_DEFAULT_ON
+#endif
 
 /**
  * Enable this option for a leaner build of Marlin that removes all
diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp
index 4b44bce9f..f69b18d2b 100644
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@@ -94,10 +94,13 @@ float Planner::max_feedrate_mm_s[XYZE_N], // Max speeds in mm per second
 
 int16_t Planner::flow_percentage[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(100); // Extrusion factor for each extruder
 
-float Planner::e_factor[EXTRUDERS],               // The flow percentage and volumetric multiplier combine to scale E movement
-      Planner::filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder
-      Planner::volumetric_area_nominal = CIRCLE_AREA((DEFAULT_NOMINAL_FILAMENT_DIA) * 0.5), // Nominal cross-sectional area
-      Planner::volumetric_multiplier[EXTRUDERS];  // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner
+float Planner::e_factor[EXTRUDERS];               // The flow percentage and volumetric multiplier combine to scale E movement
+
+#if DISABLED(NO_VOLUMETRICS)
+  float Planner::filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder
+        Planner::volumetric_area_nominal = CIRCLE_AREA((DEFAULT_NOMINAL_FILAMENT_DIA) * 0.5), // Nominal cross-sectional area
+        Planner::volumetric_multiplier[EXTRUDERS];  // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner
+#endif
 
 uint32_t Planner::max_acceleration_steps_per_s2[XYZE_N],
          Planner::max_acceleration_mm_per_s2[XYZE_N]; // Use M201 to override by software
@@ -550,25 +553,29 @@ void Planner::check_axes_activity() {
   #endif
 }
 
-/**
- * Get a volumetric multiplier from a filament diameter.
- * This is the reciprocal of the circular cross-section area.
- * Return 1.0 with volumetric off or a diameter of 0.0.
- */
-inline float calculate_volumetric_multiplier(const float &diameter) {
-  return (parser.volumetric_enabled && diameter) ? 1.0 / CIRCLE_AREA(diameter * 0.5) : 1.0;
-}
+#if DISABLED(NO_VOLUMETRICS)
 
-/**
- * Convert the filament sizes into volumetric multipliers.
- * The multiplier converts a given E value into a length.
- */
-void Planner::calculate_volumetric_multipliers() {
-  for (uint8_t i = 0; i < COUNT(filament_size); i++) {
-    volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
-    refresh_e_factor(i);
+  /**
+   * Get a volumetric multiplier from a filament diameter.
+   * This is the reciprocal of the circular cross-section area.
+   * Return 1.0 with volumetric off or a diameter of 0.0.
+   */
+  inline float calculate_volumetric_multiplier(const float &diameter) {
+    return (parser.volumetric_enabled && diameter) ? 1.0 / CIRCLE_AREA(diameter * 0.5) : 1.0;
   }
-}
+
+  /**
+   * Convert the filament sizes into volumetric multipliers.
+   * The multiplier converts a given E value into a length.
+   */
+  void Planner::calculate_volumetric_multipliers() {
+    for (uint8_t i = 0; i < COUNT(filament_size); i++) {
+      volumetric_multiplier[i] = calculate_volumetric_multiplier(filament_size[i]);
+      refresh_e_factor(i);
+    }
+  }
+
+#endif // !NO_VOLUMETRICS
 
 #if ENABLED(FILAMENT_WIDTH_SENSOR)
   /**
diff --git a/Marlin/planner.h b/Marlin/planner.h
index dce88bf8b..55493c417 100644
--- a/Marlin/planner.h
+++ b/Marlin/planner.h
@@ -155,11 +155,14 @@ class Planner {
 
     static int16_t flow_percentage[EXTRUDERS];      // Extrusion factor for each extruder
 
-    static float e_factor[EXTRUDERS],               // The flow percentage and volumetric multiplier combine to scale E movement
-                 filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder
-                 volumetric_area_nominal,           // Nominal cross-sectional area
-                 volumetric_multiplier[EXTRUDERS];  // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner
-                                                    // May be auto-adjusted by a filament width sensor
+    static float e_factor[EXTRUDERS];               // The flow percentage and volumetric multiplier combine to scale E movement
+
+    #if DISABLED(NO_VOLUMETRICS)
+      static float filament_size[EXTRUDERS],          // diameter of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder
+                   volumetric_area_nominal,           // Nominal cross-sectional area
+                   volumetric_multiplier[EXTRUDERS];  // Reciprocal of cross-sectional area of filament (in mm^2). Pre-calculated to reduce computation in the planner
+                                                      // May be auto-adjusted by a filament width sensor
+    #endif
 
     static float max_feedrate_mm_s[XYZE_N],         // Max speeds in mm per second
                  axis_steps_per_mm[XYZE_N],
@@ -273,7 +276,11 @@ class Planner {
     static void refresh_positioning();
 
     FORCE_INLINE static void refresh_e_factor(const uint8_t e) {
-      e_factor[e] = volumetric_multiplier[e] * flow_percentage[e] * 0.01;
+      e_factor[e] = (flow_percentage[e] * 0.01
+        #if DISABLED(NO_VOLUMETRICS)
+          * volumetric_multiplier[e]
+        #endif
+      );
     }
 
     // Manage fans, paste pressure, etc.
@@ -293,12 +300,16 @@ class Planner {
       void calculate_volumetric_for_width_sensor(const int8_t encoded_ratio);
     #endif
 
-    FORCE_INLINE static void set_filament_size(const uint8_t e, const float &v) {
-      filament_size[e] = v;
-      // make sure all extruders have some sane value for the filament size
-      for (uint8_t i = 0; i < COUNT(filament_size); i++)
-        if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
-    }
+    #if DISABLED(NO_VOLUMETRICS)
+
+      FORCE_INLINE static void set_filament_size(const uint8_t e, const float &v) {
+        filament_size[e] = v;
+        // make sure all extruders have some sane value for the filament size
+        for (uint8_t i = 0; i < COUNT(filament_size); i++)
+          if (!filament_size[i]) filament_size[i] = DEFAULT_NOMINAL_FILAMENT_DIA;
+      }
+
+    #endif
 
     #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)