From f06f4b40b8b5fe9806451ff3d7c93d07487a19c5 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 19 Oct 2017 01:40:29 -0500 Subject: [PATCH 1/3] Apply physical limits to mesh bounds --- Marlin/Conditionals_post.h | 93 +++++++++++++------ Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 81 +++------------- Marlin/SanityCheck.h | 4 + .../AlephObjects/TAZ4/Configuration.h | 2 +- .../AlephObjects/TAZ4/Configuration_adv.h | 81 +++------------- .../AliExpress/CL-260/Configuration.h | 2 +- .../Anet/A6/Configuration.h | 2 +- .../Anet/A6/Configuration_adv.h | 81 +++------------- .../Anet/A8/Configuration.h | 2 +- .../Anet/A8/Configuration_adv.h | 81 +++------------- .../BQ/Hephestos/Configuration.h | 2 +- .../BQ/Hephestos/Configuration_adv.h | 81 +++------------- .../BQ/Hephestos_2/Configuration.h | 2 +- .../BQ/Hephestos_2/Configuration_adv.h | 81 +++------------- .../BQ/WITBOX/Configuration.h | 2 +- .../BQ/WITBOX/Configuration_adv.h | 81 +++------------- .../Cartesio/Configuration.h | 2 +- .../Cartesio/Configuration_adv.h | 81 +++------------- .../Creality/CR-10/Configuration.h | 2 +- .../Creality/CR-10/Configuration_adv.h | 81 +++------------- .../Felix/Configuration.h | 2 +- .../Felix/Configuration_adv.h | 81 +++------------- .../Felix/DUAL/Configuration.h | 2 +- .../Folger Tech/i3-2020/Configuration.h | 2 +- .../Folger Tech/i3-2020/Configuration_adv.h | 81 +++------------- .../Geeetech/GT2560/Configuration.h | 2 +- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 2 +- .../Infitary/i3-M508/Configuration.h | 2 +- .../Infitary/i3-M508/Configuration_adv.h | 81 +++------------- .../Malyan/M150/Configuration.h | 2 +- .../Malyan/M150/Configuration_adv.h | 81 +++------------- .../Micromake/C1/basic/Configuration.h | 2 +- .../Micromake/C1/enhanced/Configuration.h | 2 +- .../RepRapWorld/Megatronics/Configuration.h | 2 +- .../RigidBot/Configuration.h | 2 +- .../RigidBot/Configuration_adv.h | 81 +++------------- .../SCARA/Configuration.h | 2 +- .../SCARA/Configuration_adv.h | 81 +++------------- .../Sanguinololu/Configuration.h | 2 +- .../Sanguinololu/Configuration_adv.h | 81 +++------------- .../TinyBoy2/Configuration.h | 2 +- .../TinyBoy2/Configuration_adv.h | 81 +++------------- .../Velleman/K8200/Configuration.h | 2 +- .../Velleman/K8200/Configuration_adv.h | 73 ++------------- .../Velleman/K8400/Configuration.h | 2 +- .../Velleman/K8400/Configuration_adv.h | 81 +++------------- .../Velleman/K8400/Dual-head/Configuration.h | 2 +- .../adafruit/ST7565/Configuration.h | 2 +- .../FLSUN/auto_calibrate/Configuration.h | 2 +- .../FLSUN/auto_calibrate/Configuration_adv.h | 81 +++------------- .../delta/FLSUN/kossel_mini/Configuration.h | 2 +- .../FLSUN/kossel_mini/Configuration_adv.h | 81 +++------------- .../delta/generic/Configuration.h | 2 +- .../delta/generic/Configuration_adv.h | 81 +++------------- .../delta/kossel_mini/Configuration.h | 2 +- .../delta/kossel_mini/Configuration_adv.h | 81 +++------------- .../delta/kossel_pro/Configuration.h | 2 +- .../delta/kossel_pro/Configuration_adv.h | 81 +++------------- .../delta/kossel_xl/Configuration.h | 2 +- .../delta/kossel_xl/Configuration_adv.h | 81 +++------------- .../gCreate/gMax1.5+/Configuration.h | 2 +- .../gCreate/gMax1.5+/Configuration_adv.h | 81 +++------------- .../makibox/Configuration.h | 2 +- .../makibox/Configuration_adv.h | 81 +++------------- .../tvrrug/Round2/Configuration.h | 2 +- .../tvrrug/Round2/Configuration_adv.h | 81 +++------------- .../wt150/Configuration.h | 2 +- .../wt150/Configuration_adv.h | 81 +++------------- Marlin/ubl.cpp | 8 +- Marlin/ubl.h | 48 +++++----- Marlin/ubl_G29.cpp | 24 ++--- Marlin/ubl_motion.cpp | 4 +- 73 files changed, 578 insertions(+), 2020 deletions(-) diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h index cf747b1a9..681a2aae9 100644 --- a/Marlin/Conditionals_post.h +++ b/Marlin/Conditionals_post.h @@ -795,6 +795,70 @@ #define PROBE_BED_HEIGHT abs(BACK_PROBE_BED_POSITION - (FRONT_PROBE_BED_POSITION)) #endif + /** + * Bed Probing rectangular bounds + * These can be further constrained in code for Delta and SCARA + */ + #if ENABLED(DELTA) + // Probing points may be verified at compile time within the radius + // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") + // so that may be added to SanityCheck.h in the future. + #define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS)) + #define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS)) + #define MAX_PROBE_X (X_CENTER + DELTA_PROBEABLE_RADIUS) + #define MAX_PROBE_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS) + #elif IS_SCARA + #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) + #define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS)) + #define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS)) + #define MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS) + #define MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS) + #else + // Boundaries for Cartesian probing based on bed limits + #define MIN_PROBE_X (max(X_MIN_BED, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MIN_PROBE_Y (max(Y_MIN_BED, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_X (min(X_MAX_BED, X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define MAX_PROBE_Y (min(Y_MAX_BED, Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #endif + + /** + * Default mesh area is an area with an inset margin on the print area. + */ + #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + #if IS_KINEMATIC + // Probing points may be verified at compile time within the radius + // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") + // so that may be added to SanityCheck.h in the future. + #define _MESH_MIN_X (MIN_PROBE_X + MESH_INSET) + #define _MESH_MIN_Y (MIN_PROBE_Y + MESH_INSET) + #define _MESH_MAX_X (MAX_PROBE_X - (MESH_INSET)) + #define _MESH_MAX_Y (MAX_PROBE_Y - (MESH_INSET)) + #else + // Boundaries for Cartesian probing based on set limits + #define _MESH_MIN_X (max(X_MIN_BED + MESH_INSET, X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MIN_Y (max(Y_MIN_BED + MESH_INSET, Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MAX_X (min(X_MAX_BED - (MESH_INSET), X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER)) + #define _MESH_MAX_Y (min(Y_MAX_BED - (MESH_INSET), Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER)) + #endif + /** + * These may be overridden in Configuration if a smaller area is wanted + */ + #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + #ifndef MESH_MIN_X + #define MESH_MIN_X _MESH_MIN_X + #endif + #ifndef MESH_MIN_Y + #define MESH_MIN_Y _MESH_MIN_Y + #endif + #ifndef MESH_MAX_X + #define MESH_MAX_X _MESH_MAX_X + #endif + #ifndef MESH_MAX_Y + #define MESH_MAX_Y _MESH_MAX_Y + #endif + #endif + #endif // MESH_BED_LEVELING || AUTO_BED_LEVELING_UBL + /** * Buzzer/Speaker */ @@ -833,35 +897,6 @@ #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT #endif - /** - * Bed Probing rectangular bounds - * These can be further constrained in code for Delta and SCARA - */ - #if ENABLED(DELTA) - #ifndef DELTA_PROBEABLE_RADIUS - #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS - #endif - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS)) - #define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS)) - #define MAX_PROBE_X (X_CENTER + DELTA_PROBEABLE_RADIUS) - #define MAX_PROBE_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS) - #elif IS_SCARA - #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) - #define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS)) - #define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS)) - #define MAX_PROBE_X (X_CENTER + SCARA_PRINTABLE_RADIUS) - #define MAX_PROBE_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS) - #else - // Boundaries for Cartesian probing based on set limits - #define MIN_PROBE_X (max(X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_MIN_BED)) - #define MIN_PROBE_Y (max(Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_MIN_BED)) - #define MAX_PROBE_X (min(X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_MAX_BED)) - #define MAX_PROBE_Y (min(Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_MAX_BED)) - #endif - // Stepper pulse duration, in cycles #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 9b1fbaa5e..f051c9523 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 4101e2b3d..ba19a7e3a 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 0c1b67803..593293e3b 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -212,6 +212,10 @@ #error "ADVANCE was removed in Marlin 1.1.6. Please use LIN_ADVANCE." #elif defined(NEOPIXEL_RGBW_LED) #error "NEOPIXEL_RGBW_LED is now NEOPIXEL_LED. Please update your configuration." +#elif defined(UBL_MESH_INSET) + #error "UBL_MESH_INSET is now just MESH_INSET. Please update your configuration." +#elif defined(UBL_MESH_MIN_X) || defined(UBL_MESH_MIN_Y) || defined(UBL_MESH_MAX_X) || defined(UBL_MESH_MAX_Y) + #error "UBL_MESH_(MIN|MAX)_[XY] is now just MESH_(MIN|MAX)_[XY]. Please update your configuration." #endif /** diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index 34ad766ce..ba99fe9a2 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -961,7 +961,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 690879050..78bc40ea0 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 1a909ce32..1d28b941e 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index 27bca9def..2b223e595 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -1084,7 +1084,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 7214db023..ae389536b 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). //#define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index f45ae7073..649909d8b 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -947,7 +947,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index 7b1388d42..d6c0f5b9f 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). //#define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index c8f4ae546..9ab3efb36 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -932,7 +932,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 110f447d8..866d5fe56 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index 653606d42..fca287f2b 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -942,7 +942,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index e3d0a9cfc..f35ddcd08 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M104 S0\nM84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -667,69 +669,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 6b1e728ae..7fbda03d1 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -932,7 +932,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 110f447d8..866d5fe56 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index f2b5fd7d6..ea72a704e 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -940,7 +940,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 806508974..57afe2dda 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index 05be39bd0..28a93e996 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -951,7 +951,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index e13ff4de2..137e3c841 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 759b67d11..69c110cfe 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -923,7 +923,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 650039ae1..609d3a33f 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 741a2a622..ca3309f09 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -923,7 +923,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h index c3acdc503..08b1827a0 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h @@ -946,7 +946,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y 10 diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index ae58b4d4b..1ee813850 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index d2f6daad9..bca8d72f4 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -956,7 +956,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 56d192f0a..94f9ff671 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index 83cdfaba1..6437f1567 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -945,7 +945,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index 07f67fd6c..f8dbf9f43 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index cb612893e..9e6877dd1 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -969,7 +969,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 1402ee599..33c7372b5 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -667,69 +669,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index a103f73a9..42ec3e993 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -945,7 +945,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index 5e1949faa..ebb0b41a8 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -945,7 +945,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 8feaa0cc9..668757db3 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 10a7d4907..bcbd40890 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -939,7 +939,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 112c0bec9..4c00fb92c 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 1be646935..6cf87ce9c 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -953,7 +953,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 63bee9e12..86bf4ade2 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 771ba98d3..916b7a4e8 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -972,7 +972,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 526984b25..70c3d6c55 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -464,12 +464,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -659,69 +661,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 3feaabf47..01f8b7348 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -997,7 +997,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index b2f921e5c..15820d007 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index 71ffc4651..022b3fa74 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -971,7 +971,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index 5956adfbe..d4de22797 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -488,7 +488,7 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. @@ -680,69 +680,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index f37088669..16c563302 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index db81334d4..88fa27ecb 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index 213d11392..982c799b2 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 044172ed9..607c58599 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -941,7 +941,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 0a74b085c..6dba4d313 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -1067,7 +1067,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 2356a54af..5218c874f 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -477,12 +477,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -672,69 +674,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 72abf8228..1b01e74d5 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1061,7 +1061,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index c26f6f35c..314b97467 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -477,12 +477,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -672,69 +674,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index e933aacc4..e640e71f8 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1056,7 +1056,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index c26f6f35c..314b97467 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -477,12 +477,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -672,69 +674,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 736a0b18e..3d041fd0d 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1059,7 +1059,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index c26f6f35c..314b97467 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -477,12 +477,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -672,69 +674,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index c8a554609..653769b99 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1059,7 +1059,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 254d3b049..063a8abd0 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -482,12 +482,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -677,69 +679,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index c888f3f61..3c797e323 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1068,7 +1068,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 1c79fb6f2..bd2ffda4e 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -477,12 +477,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -672,69 +674,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 7d4a3d109..d0a018791 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -955,7 +955,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 45 // Mesh inset margin on print area + #define MESH_INSET 45 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index 277edd659..54b3eb277 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 7ef098f8e..ebd3340d1 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -944,7 +944,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 560164eb9..f483ecf05 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). //#define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index e494d6854..5549c85d7 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -936,7 +936,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index dd293430c..f4e20e226 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 5e0bce710..96d224a41 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -946,7 +946,7 @@ //========================= Unified Bed Leveling ============================ //=========================================================================== - #define UBL_MESH_INSET 1 // Mesh inset margin on print area + #define MESH_INSET 1 // Mesh inset margin on print area #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index d8cedff8d..d9c663c83 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -475,12 +475,14 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. - #define SDCARD_RATHERRECENTFIRST //reverse file order of sd card menu display. Its sorted practically after the file system block order. - // if a file is deleted, it frees a block. hence, the order is not purely chronological. To still have auto0.g accessible, there is again the option to do that. - // using: + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART /** @@ -670,69 +672,16 @@ #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) #endif -// Default mesh area is an area with an inset margin on the print area. -// Below are the macros that are used to define the borders for the mesh area, -// made available here for specialized needs, ie dual extruder setup. -#if ENABLED(MESH_BED_LEVELING) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (MESH_INSET)) - #elif IS_SCARA - #define MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + MESH_INSET) - #define MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #define MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define MESH_MIN_X (max(MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define MESH_MIN_Y (max(MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define MESH_MAX_X (min(X_BED_SIZE - (MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define MESH_MAX_Y (min(Y_BED_SIZE - (MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define MESH_MIN_X (max(X_MIN_POS + MESH_INSET, 0)) - #define MESH_MIN_Y (max(Y_MIN_POS + MESH_INSET, 0)) - #define MESH_MAX_X (min(X_MAX_POS - (MESH_INSET), X_BED_SIZE)) - #define MESH_MAX_Y (min(Y_MAX_POS - (MESH_INSET), Y_BED_SIZE)) - #endif - #endif -#elif ENABLED(AUTO_BED_LEVELING_UBL) - #if ENABLED(DELTA) - // Probing points may be verified at compile time within the radius - // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!") - // so that may be added to SanityCheck.h in the future. - #define UBL_MESH_MIN_X (X_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + DELTA_PROBEABLE_RADIUS - (UBL_MESH_INSET)) - #elif IS_SCARA - #define UBL_MESH_MIN_X (X_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MIN_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS) + UBL_MESH_INSET) - #define UBL_MESH_MAX_X (X_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #define UBL_MESH_MAX_Y (Y_CENTER + SCARA_PRINTABLE_RADIUS - (UBL_MESH_INSET)) - #else - // Boundaries for Cartesian probing based on set limits - #if ENABLED(BED_CENTER_AT_0_0) - #define UBL_MESH_MIN_X (max(UBL_MESH_INSET, 0) - (X_BED_SIZE) / 2) - #define UBL_MESH_MIN_Y (max(UBL_MESH_INSET, 0) - (Y_BED_SIZE) / 2) - #define UBL_MESH_MAX_X (min(X_BED_SIZE - (UBL_MESH_INSET), X_BED_SIZE) - (X_BED_SIZE) / 2) - #define UBL_MESH_MAX_Y (min(Y_BED_SIZE - (UBL_MESH_INSET), Y_BED_SIZE) - (Y_BED_SIZE) / 2) - #else - #define UBL_MESH_MIN_X (max(X_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MIN_Y (max(Y_MIN_POS + UBL_MESH_INSET, 0)) - #define UBL_MESH_MAX_X (min(X_MAX_POS - (UBL_MESH_INSET), X_BED_SIZE)) - #define UBL_MESH_MAX_Y (min(Y_MAX_POS - (UBL_MESH_INSET), Y_BED_SIZE)) - #endif - #endif +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - // If this is defined, the currently active mesh will be saved in the - // current slot on M500. - #define UBL_SAVE_ACTIVE_ON_M500 + #if ENABLED(AUTO_BED_LEVELING_UBL) + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + #endif #endif // @section extras diff --git a/Marlin/ubl.cpp b/Marlin/ubl.cpp index 89fd12df4..bf99fb8d3 100644 --- a/Marlin/ubl.cpp +++ b/Marlin/ubl.cpp @@ -117,9 +117,9 @@ SERIAL_ECHO_SP(spaces + 3); serial_echo_xy(GRID_MAX_POINTS_X - 1, GRID_MAX_POINTS_Y - 1); SERIAL_EOL(); - serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MAX_Y); + serial_echo_xy(MESH_MIN_X, MESH_MAX_Y); SERIAL_ECHO_SP(spaces); - serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MAX_Y); + serial_echo_xy(MESH_MAX_X, MESH_MAX_Y); SERIAL_EOL(); } else { @@ -166,9 +166,9 @@ } if (map_type == 0) { - serial_echo_xy(UBL_MESH_MIN_X, UBL_MESH_MIN_Y); + serial_echo_xy(MESH_MIN_X, MESH_MIN_Y); SERIAL_ECHO_SP(spaces + 4); - serial_echo_xy(UBL_MESH_MAX_X, UBL_MESH_MIN_Y); + serial_echo_xy(MESH_MAX_X, MESH_MIN_Y); SERIAL_EOL(); serial_echo_xy(0, 0); SERIAL_ECHO_SP(spaces + 5); diff --git a/Marlin/ubl.h b/Marlin/ubl.h index ee0675b48..e367857a2 100644 --- a/Marlin/ubl.h +++ b/Marlin/ubl.h @@ -73,8 +73,8 @@ void lcd_quick_feedback(); #endif - #define MESH_X_DIST (float(UBL_MESH_MAX_X - (UBL_MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1)) - #define MESH_Y_DIST (float(UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1)) + #define MESH_X_DIST (float(MESH_MAX_X - (MESH_MIN_X)) / float(GRID_MAX_POINTS_X - 1)) + #define MESH_Y_DIST (float(MESH_MAX_Y - (MESH_MIN_Y)) / float(GRID_MAX_POINTS_Y - 1)) class unified_bed_leveling { private: @@ -167,25 +167,25 @@ // 15 is the maximum nubmer of grid points supported + 1 safety margin for now, // until determinism prevails constexpr static float _mesh_index_to_xpos[16] PROGMEM = { - UBL_MESH_MIN_X + 0 * (MESH_X_DIST), UBL_MESH_MIN_X + 1 * (MESH_X_DIST), - UBL_MESH_MIN_X + 2 * (MESH_X_DIST), UBL_MESH_MIN_X + 3 * (MESH_X_DIST), - UBL_MESH_MIN_X + 4 * (MESH_X_DIST), UBL_MESH_MIN_X + 5 * (MESH_X_DIST), - UBL_MESH_MIN_X + 6 * (MESH_X_DIST), UBL_MESH_MIN_X + 7 * (MESH_X_DIST), - UBL_MESH_MIN_X + 8 * (MESH_X_DIST), UBL_MESH_MIN_X + 9 * (MESH_X_DIST), - UBL_MESH_MIN_X + 10 * (MESH_X_DIST), UBL_MESH_MIN_X + 11 * (MESH_X_DIST), - UBL_MESH_MIN_X + 12 * (MESH_X_DIST), UBL_MESH_MIN_X + 13 * (MESH_X_DIST), - UBL_MESH_MIN_X + 14 * (MESH_X_DIST), UBL_MESH_MIN_X + 15 * (MESH_X_DIST) + MESH_MIN_X + 0 * (MESH_X_DIST), MESH_MIN_X + 1 * (MESH_X_DIST), + MESH_MIN_X + 2 * (MESH_X_DIST), MESH_MIN_X + 3 * (MESH_X_DIST), + MESH_MIN_X + 4 * (MESH_X_DIST), MESH_MIN_X + 5 * (MESH_X_DIST), + MESH_MIN_X + 6 * (MESH_X_DIST), MESH_MIN_X + 7 * (MESH_X_DIST), + MESH_MIN_X + 8 * (MESH_X_DIST), MESH_MIN_X + 9 * (MESH_X_DIST), + MESH_MIN_X + 10 * (MESH_X_DIST), MESH_MIN_X + 11 * (MESH_X_DIST), + MESH_MIN_X + 12 * (MESH_X_DIST), MESH_MIN_X + 13 * (MESH_X_DIST), + MESH_MIN_X + 14 * (MESH_X_DIST), MESH_MIN_X + 15 * (MESH_X_DIST) }; constexpr static float _mesh_index_to_ypos[16] PROGMEM = { - UBL_MESH_MIN_Y + 0 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 1 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 2 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 3 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 4 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 5 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 6 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 7 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 8 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 9 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 10 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 11 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 12 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 13 * (MESH_Y_DIST), - UBL_MESH_MIN_Y + 14 * (MESH_Y_DIST), UBL_MESH_MIN_Y + 15 * (MESH_Y_DIST) + MESH_MIN_Y + 0 * (MESH_Y_DIST), MESH_MIN_Y + 1 * (MESH_Y_DIST), + MESH_MIN_Y + 2 * (MESH_Y_DIST), MESH_MIN_Y + 3 * (MESH_Y_DIST), + MESH_MIN_Y + 4 * (MESH_Y_DIST), MESH_MIN_Y + 5 * (MESH_Y_DIST), + MESH_MIN_Y + 6 * (MESH_Y_DIST), MESH_MIN_Y + 7 * (MESH_Y_DIST), + MESH_MIN_Y + 8 * (MESH_Y_DIST), MESH_MIN_Y + 9 * (MESH_Y_DIST), + MESH_MIN_Y + 10 * (MESH_Y_DIST), MESH_MIN_Y + 11 * (MESH_Y_DIST), + MESH_MIN_Y + 12 * (MESH_Y_DIST), MESH_MIN_Y + 13 * (MESH_Y_DIST), + MESH_MIN_Y + 14 * (MESH_Y_DIST), MESH_MIN_Y + 15 * (MESH_Y_DIST) }; static bool g26_debug_flag, has_control_of_lcd_panel; @@ -197,14 +197,14 @@ FORCE_INLINE static void set_z(const int8_t px, const int8_t py, const float &z) { z_values[px][py] = z; } static int8_t get_cell_index_x(const float &x) { - const int8_t cx = (x - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST)); + const int8_t cx = (x - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)); return constrain(cx, 0, (GRID_MAX_POINTS_X) - 1); // -1 is appropriate if we want all movement to the X_MAX } // position. But with this defined this way, it is possible // to extrapolate off of this point even further out. Probably // that is OK because something else should be keeping that from // happening and should not be worried about at this level. static int8_t get_cell_index_y(const float &y) { - const int8_t cy = (y - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST)); + const int8_t cy = (y - (MESH_MIN_Y)) * (1.0 / (MESH_Y_DIST)); return constrain(cy, 0, (GRID_MAX_POINTS_Y) - 1); // -1 is appropriate if we want all movement to the Y_MAX } // position. But with this defined this way, it is possible // to extrapolate off of this point even further out. Probably @@ -212,12 +212,12 @@ // happening and should not be worried about at this level. static int8_t find_closest_x_index(const float &x) { - const int8_t px = (x - (UBL_MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST)); + const int8_t px = (x - (MESH_MIN_X) + (MESH_X_DIST) * 0.5) * (1.0 / (MESH_X_DIST)); return WITHIN(px, 0, GRID_MAX_POINTS_X - 1) ? px : -1; } static int8_t find_closest_y_index(const float &y) { - const int8_t py = (y - (UBL_MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST)); + const int8_t py = (y - (MESH_MIN_Y) + (MESH_Y_DIST) * 0.5) * (1.0 / (MESH_Y_DIST)); return WITHIN(py, 0, GRID_MAX_POINTS_Y - 1) ? py : -1; } @@ -355,11 +355,11 @@ } FORCE_INLINE static float mesh_index_to_xpos(const uint8_t i) { - return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : UBL_MESH_MIN_X + i * (MESH_X_DIST); + return i < GRID_MAX_POINTS_X ? pgm_read_float(&_mesh_index_to_xpos[i]) : MESH_MIN_X + i * (MESH_X_DIST); } FORCE_INLINE static float mesh_index_to_ypos(const uint8_t i) { - return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : UBL_MESH_MIN_Y + i * (MESH_Y_DIST); + return i < GRID_MAX_POINTS_Y ? pgm_read_float(&_mesh_index_to_ypos[i]) : MESH_MIN_Y + i * (MESH_Y_DIST); } static bool prepare_segmented_line_to(const float ltarget[XYZE], const float &feedrate); diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 999d9f860..a0e3481e1 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -414,7 +414,7 @@ z2 -= get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_2_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_2_Y)) /* + zprobe_zoffset */ ; z3 -= get_z_correction(LOGICAL_X_POSITION(UBL_PROBE_PT_3_X), LOGICAL_Y_POSITION(UBL_PROBE_PT_3_Y)) /* + zprobe_zoffset */ ; - do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y))); + do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y))); tilt_mesh_based_on_3pts(z1, z2, z3); restore_ubl_active_state_and_leave(); } @@ -773,8 +773,8 @@ restore_ubl_active_state_and_leave(); do_blocking_move_to_xy( - constrain(lx - (X_PROBE_OFFSET_FROM_EXTRUDER), UBL_MESH_MIN_X, UBL_MESH_MAX_X), - constrain(ly - (Y_PROBE_OFFSET_FROM_EXTRUDER), UBL_MESH_MIN_Y, UBL_MESH_MAX_Y) + constrain(lx - (X_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_X, MESH_MAX_X), + constrain(ly - (Y_PROBE_OFFSET_FROM_EXTRUDER), MESH_MIN_Y, MESH_MAX_Y) ); } @@ -908,7 +908,7 @@ save_ubl_active_state_and_disable(); // Disable bed level correction for probing do_blocking_move_to_z(in_height); - do_blocking_move_to_xy(0.5 * (UBL_MESH_MAX_X - (UBL_MESH_MIN_X)), 0.5 * (UBL_MESH_MAX_Y - (UBL_MESH_MIN_Y))); + do_blocking_move_to_xy(0.5 * (MESH_MAX_X - (MESH_MIN_X)), 0.5 * (MESH_MAX_Y - (MESH_MIN_Y))); //, min(planner.max_feedrate_mm_s[X_AXIS], planner.max_feedrate_mm_s[Y_AXIS]) / 2.0); stepper.synchronize(); @@ -1215,11 +1215,11 @@ SERIAL_EOL(); #endif - SERIAL_ECHOLNPAIR("UBL_MESH_MIN_X " STRINGIFY(UBL_MESH_MIN_X) "=", UBL_MESH_MIN_X); - SERIAL_ECHOLNPAIR("UBL_MESH_MIN_Y " STRINGIFY(UBL_MESH_MIN_Y) "=", UBL_MESH_MIN_Y); + SERIAL_ECHOLNPAIR("MESH_MIN_X " STRINGIFY(MESH_MIN_X) "=", MESH_MIN_X); + SERIAL_ECHOLNPAIR("MESH_MIN_Y " STRINGIFY(MESH_MIN_Y) "=", MESH_MIN_Y); safe_delay(25); - SERIAL_ECHOLNPAIR("UBL_MESH_MAX_X " STRINGIFY(UBL_MESH_MAX_X) "=", UBL_MESH_MAX_X); - SERIAL_ECHOLNPAIR("UBL_MESH_MAX_Y " STRINGIFY(UBL_MESH_MAX_Y) "=", UBL_MESH_MAX_Y); + SERIAL_ECHOLNPAIR("MESH_MAX_X " STRINGIFY(MESH_MAX_X) "=", MESH_MAX_X); + SERIAL_ECHOLNPAIR("MESH_MAX_Y " STRINGIFY(MESH_MAX_Y) "=", MESH_MAX_Y); safe_delay(25); SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_X ", GRID_MAX_POINTS_X); SERIAL_ECHOLNPAIR("GRID_MAX_POINTS_Y ", GRID_MAX_POINTS_Y); @@ -1597,10 +1597,10 @@ #if HAS_BED_PROBE void unified_bed_leveling::tilt_mesh_based_on_probed_grid(const bool do_ubl_mesh_map) { - constexpr int16_t x_min = max(MIN_PROBE_X, UBL_MESH_MIN_X), - x_max = min(MAX_PROBE_X, UBL_MESH_MAX_X), - y_min = max(MIN_PROBE_Y, UBL_MESH_MIN_Y), - y_max = min(MAX_PROBE_Y, UBL_MESH_MAX_Y); + constexpr int16_t x_min = max(MIN_PROBE_X, MESH_MIN_X), + x_max = min(MAX_PROBE_X, MESH_MAX_X), + y_min = max(MIN_PROBE_Y, MESH_MIN_Y), + y_max = min(MAX_PROBE_Y, MESH_MAX_Y); const float dx = float(x_max - x_min) / (g29_grid_size - 1.0), dy = float(y_max - y_min) / (g29_grid_size - 1.0); diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index 6a0d6979a..48de3e7d0 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -645,8 +645,8 @@ // in top of loop and again re-find same adjacent cell and use it, just less efficient // for mesh inset area. - int8_t cell_xi = (seg_rx - (UBL_MESH_MIN_X)) * (1.0 / (MESH_X_DIST)), - cell_yi = (seg_ry - (UBL_MESH_MIN_Y)) * (1.0 / (MESH_X_DIST)); + int8_t cell_xi = (seg_rx - (MESH_MIN_X)) * (1.0 / (MESH_X_DIST)), + cell_yi = (seg_ry - (MESH_MIN_Y)) * (1.0 / (MESH_X_DIST)); cell_xi = constrain(cell_xi, 0, (GRID_MAX_POINTS_X) - 1); cell_yi = constrain(cell_yi, 0, (GRID_MAX_POINTS_Y) - 1); From 1c97c1582cb79e11a141d59da883ff148fbf862b Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 24 Oct 2017 18:25:50 -0500 Subject: [PATCH 2/3] Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h --- Marlin/Configuration.h | 1 + Marlin/Configuration_adv.h | 4 ---- .../example_configurations/AlephObjects/TAZ4/Configuration.h | 1 + .../AlephObjects/TAZ4/Configuration_adv.h | 4 ---- .../example_configurations/AliExpress/CL-260/Configuration.h | 1 + Marlin/example_configurations/Anet/A6/Configuration.h | 1 + Marlin/example_configurations/Anet/A6/Configuration_adv.h | 4 ---- Marlin/example_configurations/Anet/A8/Configuration.h | 1 + Marlin/example_configurations/Anet/A8/Configuration_adv.h | 4 ---- Marlin/example_configurations/BQ/Hephestos/Configuration.h | 1 + .../example_configurations/BQ/Hephestos/Configuration_adv.h | 4 ---- Marlin/example_configurations/BQ/Hephestos_2/Configuration.h | 1 + .../example_configurations/BQ/Hephestos_2/Configuration_adv.h | 4 ---- Marlin/example_configurations/BQ/WITBOX/Configuration.h | 1 + Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h | 4 ---- Marlin/example_configurations/Cartesio/Configuration.h | 1 + Marlin/example_configurations/Cartesio/Configuration_adv.h | 4 ---- Marlin/example_configurations/Creality/CR-10/Configuration.h | 1 + .../example_configurations/Creality/CR-10/Configuration_adv.h | 4 ---- Marlin/example_configurations/Felix/Configuration.h | 1 + Marlin/example_configurations/Felix/Configuration_adv.h | 4 ---- Marlin/example_configurations/Felix/DUAL/Configuration.h | 1 + .../Folger Tech/i3-2020/Configuration.h | 1 + .../Folger Tech/i3-2020/Configuration_adv.h | 4 ---- Marlin/example_configurations/Geeetech/GT2560/Configuration.h | 1 + .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 1 + .../example_configurations/Infitary/i3-M508/Configuration.h | 1 + .../Infitary/i3-M508/Configuration_adv.h | 4 ---- Marlin/example_configurations/Malyan/M150/Configuration.h | 1 + Marlin/example_configurations/Malyan/M150/Configuration_adv.h | 4 ---- .../example_configurations/Micromake/C1/basic/Configuration.h | 1 + .../Micromake/C1/enhanced/Configuration.h | 1 + .../RepRapWorld/Megatronics/Configuration.h | 1 + Marlin/example_configurations/RigidBot/Configuration.h | 1 + Marlin/example_configurations/RigidBot/Configuration_adv.h | 4 ---- Marlin/example_configurations/SCARA/Configuration.h | 1 + Marlin/example_configurations/SCARA/Configuration_adv.h | 4 ---- Marlin/example_configurations/Sanguinololu/Configuration.h | 1 + .../example_configurations/Sanguinololu/Configuration_adv.h | 4 ---- Marlin/example_configurations/TinyBoy2/Configuration.h | 1 + Marlin/example_configurations/TinyBoy2/Configuration_adv.h | 4 ---- Marlin/example_configurations/Velleman/K8200/Configuration.h | 1 + .../example_configurations/Velleman/K8200/Configuration_adv.h | 4 ---- Marlin/example_configurations/Velleman/K8400/Configuration.h | 1 + .../example_configurations/Velleman/K8400/Configuration_adv.h | 4 ---- .../Velleman/K8400/Dual-head/Configuration.h | 1 + Marlin/example_configurations/adafruit/ST7565/Configuration.h | 1 + .../delta/FLSUN/auto_calibrate/Configuration.h | 1 + .../delta/FLSUN/auto_calibrate/Configuration_adv.h | 4 ---- .../delta/FLSUN/kossel_mini/Configuration.h | 1 + .../delta/FLSUN/kossel_mini/Configuration_adv.h | 4 ---- Marlin/example_configurations/delta/generic/Configuration.h | 1 + .../example_configurations/delta/generic/Configuration_adv.h | 4 ---- .../example_configurations/delta/kossel_mini/Configuration.h | 1 + .../delta/kossel_mini/Configuration_adv.h | 4 ---- .../example_configurations/delta/kossel_pro/Configuration.h | 1 + .../delta/kossel_pro/Configuration_adv.h | 4 ---- Marlin/example_configurations/delta/kossel_xl/Configuration.h | 1 + .../delta/kossel_xl/Configuration_adv.h | 4 ---- .../example_configurations/gCreate/gMax1.5+/Configuration.h | 1 + .../gCreate/gMax1.5+/Configuration_adv.h | 4 ---- Marlin/example_configurations/makibox/Configuration.h | 1 + Marlin/example_configurations/makibox/Configuration_adv.h | 4 ---- Marlin/example_configurations/tvrrug/Round2/Configuration.h | 1 + .../example_configurations/tvrrug/Round2/Configuration_adv.h | 4 ---- Marlin/example_configurations/wt150/Configuration.h | 1 + Marlin/example_configurations/wt150/Configuration_adv.h | 4 ---- 67 files changed, 38 insertions(+), 116 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index f051c9523..763561660 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -954,6 +954,7 @@ //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index ba19a7e3a..65c617cb8 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index ba99fe9a2..b70a2884c 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -974,6 +974,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 78bc40ea0..3bae53008 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 1d28b941e..29d5f2258 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index 2b223e595..d100ccdc4 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -1097,6 +1097,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index ae389536b..0684756cc 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 649909d8b..1aa092306 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -960,6 +960,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index d6c0f5b9f..1a013868e 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index 9ab3efb36..ad4d423ad 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -945,6 +945,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 866d5fe56..9f9947a09 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index fca287f2b..06d04a0d1 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -955,6 +955,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index f35ddcd08..a725c3a4c 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -675,10 +675,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 7fbda03d1..507d22fc2 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -945,6 +945,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 866d5fe56..9f9947a09 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index ea72a704e..ac610218b 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -953,6 +953,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 57afe2dda..9db3043c3 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index 28a93e996..a7132a5d1 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -964,6 +964,7 @@ //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index 137e3c841..a5e81cfbf 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 69c110cfe..14ff54832 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -936,6 +936,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 609d3a33f..992401930 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index ca3309f09..067840889 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -936,6 +936,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h index 08b1827a0..2b3448de9 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h @@ -959,6 +959,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 1ee813850..77b33e37a 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index bca8d72f4..3ad6439f6 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -969,6 +969,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 94f9ff671..76c453925 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index 6437f1567..5707e95cc 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -958,6 +958,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index f8dbf9f43..60bd28e30 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index 9e6877dd1..9e21f490f 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -982,6 +982,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 33c7372b5..af795b0b9 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -675,10 +675,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index 42ec3e993..08791225d 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -958,6 +958,7 @@ //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index ebb0b41a8..ec7d8d705 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -958,6 +958,7 @@ //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 668757db3..487595558 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index bcbd40890..b63d8a2e9 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -952,6 +952,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 4c00fb92c..999ef71d6 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 6cf87ce9c..1abb3fa4d 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -966,6 +966,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 86bf4ade2..6c521636c 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 916b7a4e8..7c6f6959f 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -985,6 +985,7 @@ //#define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 70c3d6c55..08a6abf19 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -667,10 +667,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 01f8b7348..218ad4869 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -1010,6 +1010,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 15820d007..2513ade40 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index 022b3fa74..cc9646fd5 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -984,6 +984,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index d4de22797..aeebbe332 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -686,10 +686,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 16c563302..4eef02baf 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index 88fa27ecb..a5569184d 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index 982c799b2..fffdce047 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 607c58599..2c564cc1f 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -954,6 +954,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 6dba4d313..86965bb21 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -1082,6 +1082,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 5218c874f..e015ffc52 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -680,10 +680,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 1b01e74d5..6062d39b8 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1076,6 +1076,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 314b97467..2d4a0a88e 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -680,10 +680,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index e640e71f8..8fe5415b4 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1071,6 +1071,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 314b97467..2d4a0a88e 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -680,10 +680,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 3d041fd0d..6d4699f22 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1074,6 +1074,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 314b97467..2d4a0a88e 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -680,10 +680,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 653769b99..a375c996e 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1074,6 +1074,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index 063a8abd0..ee671cb2c 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -685,10 +685,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 3c797e323..425220a89 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1083,6 +1083,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index bd2ffda4e..fa59f8d54 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -680,10 +680,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index d0a018791..41177f22c 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -968,6 +968,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index 54b3eb277..623bf69c6 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index ebd3340d1..c915f0252 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -957,6 +957,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index f483ecf05..53bcca8f7 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 5549c85d7..697f00cae 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -949,6 +949,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index f4e20e226..590687094 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 96d224a41..b5c867336 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -959,6 +959,7 @@ #define UBL_G26_MESH_VALIDATION // Enable G26 mesh validation #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #elif ENABLED(MESH_BED_LEVELING) diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index d9c663c83..f201f6957 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -678,10 +678,6 @@ //#define MESH_MIN_Y MESH_INSET //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) - - #if ENABLED(AUTO_BED_LEVELING_UBL) - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - #endif #endif // @section extras From ec9d7b639de8e90d0e09940dba7c6e014d1e3afe Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 24 Oct 2017 18:32:20 -0500 Subject: [PATCH 3/3] Encourage users to re-examine their configs --- Marlin/Configuration.h | 2 +- Marlin/Configuration_adv.h | 2 +- Marlin/Version.h | 6 +++--- .../AlephObjects/TAZ4/Configuration.h | 2 +- .../AlephObjects/TAZ4/Configuration_adv.h | 2 +- .../AliExpress/CL-260/Configuration.h | 2 +- Marlin/example_configurations/Anet/A6/Configuration.h | 2 +- Marlin/example_configurations/Anet/A6/Configuration_adv.h | 2 +- Marlin/example_configurations/Anet/A8/Configuration.h | 2 +- Marlin/example_configurations/Anet/A8/Configuration_adv.h | 2 +- Marlin/example_configurations/BQ/Hephestos/Configuration.h | 2 +- .../example_configurations/BQ/Hephestos/Configuration_adv.h | 2 +- .../example_configurations/BQ/Hephestos_2/Configuration.h | 2 +- .../BQ/Hephestos_2/Configuration_adv.h | 2 +- Marlin/example_configurations/BQ/WITBOX/Configuration.h | 2 +- Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h | 2 +- Marlin/example_configurations/Cartesio/Configuration.h | 2 +- Marlin/example_configurations/Cartesio/Configuration_adv.h | 2 +- .../example_configurations/Creality/CR-10/Configuration.h | 2 +- .../Creality/CR-10/Configuration_adv.h | 2 +- Marlin/example_configurations/Felix/Configuration.h | 2 +- Marlin/example_configurations/Felix/Configuration_adv.h | 2 +- Marlin/example_configurations/Felix/DUAL/Configuration.h | 2 +- .../Folger Tech/i3-2020/Configuration.h | 2 +- .../Folger Tech/i3-2020/Configuration_adv.h | 2 +- .../example_configurations/Geeetech/GT2560/Configuration.h | 2 +- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 2 +- .../example_configurations/Infitary/i3-M508/Configuration.h | 2 +- .../Infitary/i3-M508/Configuration_adv.h | 2 +- Marlin/example_configurations/Malyan/M150/Configuration.h | 2 +- .../example_configurations/Malyan/M150/Configuration_adv.h | 2 +- .../Micromake/C1/basic/Configuration.h | 2 +- .../Micromake/C1/enhanced/Configuration.h | 2 +- .../Micromake/C1/enhanced/Configuration_adv.h | 2 +- .../RepRapWorld/Megatronics/Configuration.h | 2 +- Marlin/example_configurations/RigidBot/Configuration.h | 2 +- Marlin/example_configurations/RigidBot/Configuration_adv.h | 2 +- Marlin/example_configurations/SCARA/Configuration.h | 2 +- Marlin/example_configurations/SCARA/Configuration_adv.h | 2 +- Marlin/example_configurations/Sanguinololu/Configuration.h | 2 +- .../example_configurations/Sanguinololu/Configuration_adv.h | 2 +- Marlin/example_configurations/TinyBoy2/Configuration.h | 2 +- Marlin/example_configurations/TinyBoy2/Configuration_adv.h | 2 +- .../example_configurations/Velleman/K8200/Configuration.h | 2 +- .../Velleman/K8200/Configuration_adv.h | 2 +- .../example_configurations/Velleman/K8400/Configuration.h | 2 +- .../Velleman/K8400/Configuration_adv.h | 2 +- .../Velleman/K8400/Dual-head/Configuration.h | 2 +- .../example_configurations/adafruit/ST7565/Configuration.h | 2 +- .../delta/FLSUN/auto_calibrate/Configuration.h | 2 +- .../delta/FLSUN/auto_calibrate/Configuration_adv.h | 2 +- .../delta/FLSUN/kossel_mini/Configuration.h | 2 +- .../delta/FLSUN/kossel_mini/Configuration_adv.h | 2 +- Marlin/example_configurations/delta/generic/Configuration.h | 2 +- .../delta/generic/Configuration_adv.h | 2 +- .../delta/kossel_mini/Configuration.h | 2 +- .../delta/kossel_mini/Configuration_adv.h | 2 +- .../example_configurations/delta/kossel_pro/Configuration.h | 2 +- .../delta/kossel_pro/Configuration_adv.h | 2 +- .../example_configurations/delta/kossel_xl/Configuration.h | 2 +- .../delta/kossel_xl/Configuration_adv.h | 2 +- .../example_configurations/gCreate/gMax1.5+/Configuration.h | 2 +- .../gCreate/gMax1.5+/Configuration_adv.h | 2 +- Marlin/example_configurations/makibox/Configuration.h | 2 +- Marlin/example_configurations/makibox/Configuration_adv.h | 2 +- Marlin/example_configurations/tvrrug/Round2/Configuration.h | 2 +- .../tvrrug/Round2/Configuration_adv.h | 2 +- Marlin/example_configurations/wt150/Configuration.h | 2 +- Marlin/example_configurations/wt150/Configuration_adv.h | 2 +- 69 files changed, 71 insertions(+), 71 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 763561660..fb0bb88b1 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 65c617cb8..de59e34a7 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/Version.h b/Marlin/Version.h index d8d490ebb..97e570a3a 100644 --- a/Marlin/Version.h +++ b/Marlin/Version.h @@ -48,7 +48,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ - #define STRING_DISTRIBUTION_DATE "2017-05-04 12:00" + #define STRING_DISTRIBUTION_DATE "2017-10-24 12:00" /** * Required minimum Configuration.h and Configuration_adv.h file versions. @@ -57,8 +57,8 @@ * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on * the configuration files. */ - #define REQUIRED_CONFIGURATION_H_VERSION 010100 - #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010100 + #define REQUIRED_CONFIGURATION_H_VERSION 010107 + #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010107 /** * The protocol for communication to the host. Protocol indicates communication diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index b70a2884c..46697634f 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 3bae53008..3db33f142 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 29d5f2258..68f343bdb 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index d100ccdc4..bb985bf2a 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index 0684756cc..e627be39f 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 1aa092306..44caf20e9 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index 1a013868e..f366e7f3d 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index ad4d423ad..b072b93f4 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 9f9947a09..b3bcd8d59 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index 06d04a0d1..2ba7bbc59 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -22,7 +22,7 @@ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //================================= README ================================== diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index a725c3a4c..af14b5d7b 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 507d22fc2..00eda27b6 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 9f9947a09..b3bcd8d59 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index ac610218b..7dc07353c 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 9db3043c3..1350274cc 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index a7132a5d1..42874ad9b 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index a5e81cfbf..cb8f69205 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 14ff54832..afb7ff675 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 992401930..473d6b31b 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 067840889..8ba2779c1 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h index 2b3448de9..bf9822ec8 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h index 77b33e37a..a86b4b7b5 100644 --- a/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/Folger Tech/i3-2020/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index 3ad6439f6..59df838ee 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 76c453925..0c5f4795a 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index 5707e95cc..d2702adf0 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index 60bd28e30..c0da4ae3d 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index 9e21f490f..bf2bc9457 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -42,7 +42,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index af795b0b9..67069d68e 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index 08791225d..818c80445 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index ec7d8d705..e209deed6 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h index 3adae69fa..f76bb1929 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 487595558..ba42c69c0 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index b63d8a2e9..e89472365 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 999ef71d6..b9d74506e 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 1abb3fa4d..c4c5c50b3 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 6c521636c..29182135e 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 7c6f6959f..fe0a8df73 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index 08a6abf19..972e943b8 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 218ad4869..5cb7dfa54 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 /** * Sample configuration file for TinyBoy2 L10/L16 diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 2513ade40..3d76835cf 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index cc9646fd5..9bca7a12d 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 /** * Sample configuration file for Vellemann K8200 diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index aeebbe332..8e79c96ff 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -41,7 +41,7 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 4eef02baf..86a8ef4cc 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index a5569184d..c0aa1dcab 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index fffdce047..f4b0fd0bf 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 2c564cc1f..8766d85be 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index 86965bb21..9da8d30ed 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index e015ffc52..df790f785 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 6062d39b8..958a11921 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 2d4a0a88e..7c03d45a4 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index 8fe5415b4..e452ea039 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 2d4a0a88e..7c03d45a4 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 6d4699f22..ed9d596de 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 2d4a0a88e..7c03d45a4 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index a375c996e..58c79345f 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -41,7 +41,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index ee671cb2c..3c25d3f3d 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index 425220a89..a450fe19c 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index fa59f8d54..cfb5017c2 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 41177f22c..42e2a0763 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index 623bf69c6..794ea0b22 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index c915f0252..55ae6c330 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 53bcca8f7..102f29339 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 697f00cae..f28d1c5d4 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 590687094..a33b57da7 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index b5c867336..705d8ec92 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010100 +#define CONFIGURATION_H_VERSION 010107 //=========================================================================== //============================= Getting Started ============================= diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index f201f6957..67fd9dd30 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010100 +#define CONFIGURATION_ADV_H_VERSION 010107 // @section temperature