Merge pull request #4285 from thinkyhead/rc_manual_move_fast_fine

No delay for the smallest LCD moves
master
Scott Lahteine 8 years ago committed by GitHub
commit 2224032568

@ -1707,12 +1707,6 @@ static void clean_up_after_endstop_or_probe_move() {
/**
* Raise Z to a minimum height to make room for a probe to move
*
* zprobe_zoffset: Negative of the Z height where the probe engages
* z_raise: The probing raise distance
*
* The zprobe_zoffset is negative for a switch below the nozzle, so
* multiply by Z_HOME_DIR (-1) to move enough away from the bed.
*/
inline void do_probe_raise(float z_raise) {
#if ENABLED(DEBUG_LEVELING_FEATURE)
@ -1723,7 +1717,7 @@ static void clean_up_after_endstop_or_probe_move() {
#endif
float z_dest = home_offset[Z_AXIS] + z_raise;
if ((Z_HOME_DIR) < 0 && zprobe_zoffset < 0)
if (zprobe_zoffset < 0)
z_dest -= zprobe_zoffset;
if (z_dest > current_position[Z_AXIS])

@ -1293,12 +1293,14 @@ void kill_screen(const char* lcd_msg) {
#endif // DELTA_CALIBRATION_MENU
float move_menu_scale;
/**
* If the most recent manual move hasn't been fed to the planner yet,
* and the planner can accept one, send immediately
*/
inline void manage_manual_move() {
if (manual_move_axis != (int8_t)NO_AXIS && millis() >= manual_move_start_time && !planner.is_full()) {
if (manual_move_axis != (int8_t)NO_AXIS && ELAPSED(millis(), manual_move_start_time) && !planner.is_full()) {
#if ENABLED(DELTA)
calculate_delta(current_position);
planner.buffer_line(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS], manual_feedrate[manual_move_axis]/60, manual_move_e_index);
@ -1321,7 +1323,7 @@ void kill_screen(const char* lcd_msg) {
#if EXTRUDERS > 1
if (axis == E_AXIS) manual_move_e_index = eindex >= 0 ? eindex : active_extruder;
#endif
manual_move_start_time = millis() + 500UL; // 1/2 second delay
manual_move_start_time = millis() + (move_menu_scale < 0.99 ? 0UL : 250UL); // delay for bigger moves
manual_move_axis = (int8_t)axis;
}
@ -1331,8 +1333,6 @@ void kill_screen(const char* lcd_msg) {
*
*/
float move_menu_scale;
static void _lcd_move_xyz(const char* name, AxisEnum axis, float min, float max) {
if (LCD_CLICKED) { lcd_goto_previous_menu(true); return; }
ENCODER_DIRECTION_NORMAL();

Loading…
Cancel
Save