diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index df0614b50..1cde25fca 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -31,10 +31,12 @@ Here are some standard links for getting your machine calibrated: //=========================================================================== //============================= SCARA Printer =============================== //=========================================================================== -// For a Delta printer replace the configuration files with the files in the +// For a Scara printer replace the configuration files with the files in the // example_configurations/SCARA directory. // +// @section info + // User-specified version info of this build to display in [Pronterface, etc] terminal window during // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // build by the user have been successfully uploaded into firmware. @@ -45,12 +47,16 @@ Here are some standard links for getting your machine calibrated: #define STRING_SPLASH_LINE1 "v" STRING_VERSION // will be shown during bootup in line 1 //#define STRING_SPLASH_LINE2 STRING_VERSION_CONFIG_H // will be shown during bootup in line2 +// @section machine + // SERIAL_PORT selects which serial port should be used for communication with the host. // This allows the connection of wireless adapters (for instance) to non-default port pins. // Serial port 0 is still used by the Arduino bootloader regardless of this setting. +// :[0,1,2,3,4,5,6,7] #define SERIAL_PORT 0 // This determines the communication speed of the printer +// :[2400,9600,19200,38400,57600,115200,250000] #define BAUDRATE 250000 // This enables the serial port associated to the Bluetooth interface @@ -71,17 +77,27 @@ Here are some standard links for getting your machine calibrated: // #define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // This defines the number of extruders +// :[1,2,3,4] #define EXTRUDERS 1 +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + //// The following define selects which power supply you have. Please choose the one that matches your setup // 1 = ATX // 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) +// :{1:'ATX',2:'X-Box 360'} #define POWER_SUPPLY 1 // Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it. // #define PS_DEFAULT_OFF +// @section temperature + //=========================================================================== //============================= Thermal Settings ============================ //=========================================================================== @@ -245,7 +261,7 @@ Here are some standard links for getting your machine calibrated: // #define DEFAULT_bedKi 1.41 // #define DEFAULT_bedKd 1675.16 -//Vellemann K8200 PCB heatbed with standard PCU - calculated with PID Autotune and tested +//Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested //from pidautotune #define DEFAULT_bedKp 341.88 #define DEFAULT_bedKi 25.32 @@ -254,6 +270,7 @@ Here are some standard links for getting your machine calibrated: // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED +// @section extruder //this prevents dangerous Extruder moves, i.e. if the temperature is under the limit //can be software-disabled for whatever purposes by @@ -308,12 +325,16 @@ your extruder heater takes 2 minutes to hit the target on heating. //============================= Mechanical Settings ========================= //=========================================================================== +// @section machine + // Uncomment this option to enable CoreXY kinematics // #define COREXY // Enable this option for Toshiba steppers // #define CONFIG_STEPPERS_TOSHIBA +// @section homing + // coarse Endstop Settings #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors @@ -325,6 +346,7 @@ your extruder heater takes 2 minutes to hit the target on heating. #define ENDSTOPPULLUP_XMIN #define ENDSTOPPULLUP_YMIN #define ENDSTOPPULLUP_ZMIN + // #define ENDSTOPPULLUP_ZPROBE #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). @@ -338,7 +360,15 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define DISABLE_MAX_ENDSTOPS //#define DISABLE_MIN_ENDSTOPS +// @section machine +// If you want to enable the Z Probe pin, but disable its use, uncomment the line below. +// This only affects a Z Probe Endstop if you have separate Z min endstop as well and have +// activated Z_PROBE_ENDSTOP below. If you are using the Z Min endstop on your Z Probe, +// this has no effect. +//#define DISABLE_Z_PROBE_ENDSTOP + // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{0:'Low',1:'High'} #define X_ENABLE_ON 0 #define Y_ENABLE_ON 0 #define Z_ENABLE_ON 0 @@ -348,20 +378,32 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define DISABLE_X false #define DISABLE_Y false #define DISABLE_Z true + +// @section extruder + #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled +// @section machine + // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. #define INVERT_X_DIR false #define INVERT_Y_DIR false #define INVERT_Z_DIR false -#define INVERT_E0_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true // K8200: true for geared default extruder! #define INVERT_E1_DIR true #define INVERT_E2_DIR true #define INVERT_E3_DIR true +// @section homing + // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] #define X_HOME_DIR -1 #define Y_HOME_DIR -1 #define Z_HOME_DIR -1 @@ -369,6 +411,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define min_software_endstops true // If true, axis won't move to coordinates less than HOME_POS. #define max_software_endstops true // If true, axis won't move to coordinates greater than the defined lengths below. +// @section machine + // Travel limits after homing (units are in mm) #define X_MIN_POS 0 #define Y_MIN_POS 0 @@ -388,14 +432,14 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //#define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined. //=========================================================================== -//============================ Manual Bed Leveling ========================== +//============================ Mesh Bed Leveling ============================ //=========================================================================== // #define MANUAL_BED_LEVELING // Add display menu option for bed leveling // #define MESH_BED_LEVELING // Enable mesh bed leveling #ifdef MANUAL_BED_LEVELING - #define MBL_Z_STEP 0.025 + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis #endif // MANUAL_BED_LEVELING #ifdef MESH_BED_LEVELING @@ -412,6 +456,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //============================= Bed Auto Leveling =========================== //=========================================================================== +// @section bedlevel + //#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line) #define Z_PROBE_REPEATABILITY_TEST // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled. @@ -520,6 +566,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #endif // ENABLE_AUTO_BED_LEVELING +// @section homing + // The position of the homing switches //#define MANUAL_HOME_POSITIONS // If defined, MANUAL_*_HOME_POS below will be used //#define BED_CENTER_AT_0_0 // If defined, the center of the bed is at (X=0, Y=0) @@ -533,6 +581,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //#define MANUAL_Z_HOME_POS 402 // For delta: Distance between nozzle and print surface after homing. #endif +// @section movement + /** * MOVEMENT SETTINGS */ @@ -549,13 +599,6 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration in mm/s^2 for retracts #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration in mm/s^2 for travel (non printing) moves - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -// #define EXTRUDER_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis -// #define EXTRUDER_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis - // The speed change that does not require acceleration (i.e. the software might assume it can be done instantaneously) #define DEFAULT_XYJERK 20.0 // (mm/sec) #define DEFAULT_ZJERK 0.4 // (mm/sec) @@ -566,6 +609,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //============================= Additional Features =========================== //============================================================================= +// @section more + // Custom M code points #define CUSTOM_M_CODES #ifdef CUSTOM_M_CODES @@ -576,6 +621,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #endif #endif +// @section extras // EEPROM // The microcontroller can store settings in the EEPROM, e.g. max velocity... @@ -590,26 +636,30 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define EEPROM_CHITCHAT // please keep turned on if you can. #endif + +// @section temperature + // Preheat Constants #define PLA_PREHEAT_HOTEND_TEMP 190 -#define PLA_PREHEAT_HPB_TEMP 50 +#define PLA_PREHEAT_HPB_TEMP 50 // K8200: set back to 70 if you have an upgraded heatbed power supply #define PLA_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 #define ABS_PREHEAT_HOTEND_TEMP 240 -#define ABS_PREHEAT_HPB_TEMP 60 +#define ABS_PREHEAT_HPB_TEMP 60 // K8200: set back to 110 if you have an upgraded heatbed power supply #define ABS_PREHEAT_FAN_SPEED 0 // Insert Value between 0 and 255 //==============================LCD and SD support============================= +// @section lcd // Define your display language below. Replace (en) with your language code and uncomment. // en, pl, fr, de, es, ru, it, pt, pt-br, fi, an, nl, ca, eu, kana, kana_utf8, test // See also language.h -//#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en) +#define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en) // Choose ONE of these 3 charsets. This has to match your hardware. Ignored for full graphic display. // To find out what type you have - compile with (test) - upload - click to get the menu. You'll see two typical lines from the upper half of the charset. // See also documentation/LCDLanguageFont.md - #define DISPLAY_CHARSET_HD44780_JAPAN // this is the most common hardware + #define DISPLAY_CHARSET_HD44780_JAPAN // K8200: for Display VM8201 // this is the most common hardware //#define DISPLAY_CHARSET_HD44780_WESTERN //#define DISPLAY_CHARSET_HD44780_CYRILLIC @@ -620,7 +670,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking -#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. +#define ULTIMAKERCONTROLLER // K8200: for Display VM8201 // as available from the Ultimaker online store. //#define ULTIPANEL //the UltiPanel as on Thingiverse //#define LCD_FEEDBACK_FREQUENCY_HZ 1000 // this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click @@ -683,6 +733,8 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic //#define SAV_3DLCD +// @section extras + // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino //#define FAST_PWM_FAN @@ -706,7 +758,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ // #define PHOTOGRAPH_PIN 23 -// SF send wrong arc g-codes when using Arc Point as fillet procedure +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure //#define SF_ARC_FIX // Support for the BariCUDA Paste Extruder. @@ -760,7 +812,7 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic #define MAX_MEASUREMENT_DELAY 20 //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM and lower number saves RAM) //defines used in the code -#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially +#define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA //set measured to nominal initially //When using an LCD, uncomment the line below to display the Filament sensor data on the last line instead of status. Status will appear for 5 sec. //#define FILAMENT_LCD_DISPLAY