From 3b1f186c0c8bea53bdd002dfdc91fb10c788f576 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Thu, 18 Dec 2014 12:07:26 -0800
Subject: [PATCH] Clean up configs

---
 Marlin/Configuration.h                        |  1 -
 .../SCARA/Configuration.h                     | 46 +------------------
 .../makibox/Configuration.h                   | 44 +-----------------
 3 files changed, 4 insertions(+), 87 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 591ce1333..b99ec6a29 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -38,7 +38,6 @@
 // This enables the serial port associated to the Bluetooth interface
 //#define BTENABLED              // Enable BT interface on AT90USB devices
 
-
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index f7bdab828..e87d22848 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -55,50 +55,8 @@
 // This enables the serial port associated to the Bluetooth interface
 //#define BTENABLED              // Enable BT interface on AT90USB devices
 
-
-//// The following define selects which electronics board you have. Please choose the one that matches your setup
-// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
-// 11 = Gen7 v1.1, v1.2 = 11
-// 12 = Gen7 v1.3
-// 13 = Gen7 v1.4
-// 131 = OpenHardware.co.za custom Gen7 electronics
-// 2  = Cheaptronic v1.0
-// 20 = Sethi 3D_1
-// 3  = MEGA/RAMPS up to 1.2 = 3
-// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
-// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
-// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
-// 4  = Duemilanove w/ ATMega328P pin assignment
-// 5  = Gen6
-// 51 = Gen6 deluxe
-// 6  = Sanguinololu < 1.2
-// 62 = Sanguinololu 1.2 and above
-// 63 = Melzi
-// 64 = STB V1.1
-// 65 = Azteeg X1
-// 66 = Melzi with ATmega1284 (MaKr3d version)
-// 67 = Azteeg X3
-// 68 = Azteeg X3 Pro
-// 7  = Ultimaker
-// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-// 72 = Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-// 77 = 3Drag Controller
-// 8  = Teensylu
-// 80 = Rumba
-// 81 = Printrboard (AT90USB1286)
-// 82 = Brainwave (AT90USB646)
-// 83 = SAV Mk-I (AT90USB1286)
-// 84 = Teensy++2.0 (AT90USB1286) // CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84  make
-// 9  = Gen3+
-// 70 = Megatronics
-// 701= Megatronics v2.0
-// 702= Minitronics v1.0
-// 90 = Alpha OMCA board
-// 91 = Final OMCA board
-// 301= Rambo
-// 21 = Elefu Ra Board (v3)
-// 88 = 5DPrint D8 Driver Board
-
+// The following define selects which electronics board you have.
+// Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_RAMPS_13_EFB
 #endif
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index c39465f2b..967f0e3b2 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -30,48 +30,8 @@
 // This enables the serial port associated to the Bluetooth interface
 //#define BTENABLED              // Enable BT interface on AT90USB devices
 
-
-//// The following define selects which electronics board you have. Please choose the one that matches your setup
-// 10 = Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
-// 11 = Gen7 v1.1, v1.2 = 11
-// 12 = Gen7 v1.3
-// 13 = Gen7 v1.4
-// 2  = Cheaptronic v1.0
-// 20 = Sethi 3D_1
-// 3  = MEGA/RAMPS up to 1.2 = 3
-// 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
-// 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
-// 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
-// 4  = Duemilanove w/ ATMega328P pin assignment
-// 5  = Gen6
-// 51 = Gen6 deluxe
-// 6  = Sanguinololu < 1.2
-// 62 = Sanguinololu 1.2 and above
-// 63 = Melzi
-// 64 = STB V1.1
-// 65 = Azteeg X1
-// 66 = Melzi with ATmega1284 (MaKr3d version)
-// 67 = Azteeg X3
-// 68 = Azteeg X3 Pro
-// 7  = Ultimaker
-// 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-// 72 = Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-// 77 = 3Drag Controller
-// 8  = Teensylu
-// 80 = Rumba
-// 81 = Printrboard (AT90USB1286)
-// 82 = Brainwave (AT90USB646)
-// 83 = SAV Mk-I (AT90USB1286)
-// 9  = Gen3+
-// 70 = Megatronics
-// 701= Megatronics v2.0
-// 702= Minitronics v1.0
-// 90 = Alpha OMCA board
-// 91 = Final OMCA board
-// 301= Rambo
-// 21 = Elefu Ra Board (v3)
-// 88 = 5DPrint D8 Driver Board
-
+// The following define selects which electronics board you have.
+// Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
   #define MOTHERBOARD BOARD_5DPRINT
 #endif