diff --git a/Marlin/language.h b/Marlin/language.h
index f236dd381..ce5f7fdec 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -1,3 +1,4 @@
+<<<<<<< HEAD
 #ifndef LANGUAGE_H
 #define LANGUAGE_H
 
@@ -504,3 +505,482 @@
 
 #endif
 #endif // ifndef LANGUAGE_H
+=======
+#ifndef LANGUAGE_H
+#define LANGUAGE_H
+
+// Languages
+// 1  Custom (For you to add your own messages)
+// 2  English 
+// 3  French	(Waiting translation)
+// 4  German	(Waiting translation)
+// 5  Spanish
+// 6  Etc
+
+#define LANGUAGE_CHOICE 1  // Pick your language from the list above
+
+#define PROTOCOL_VERSION "1.0"
+
+#if MOTHERBOARD == 7 || MOTHERBOARD == 71
+	#define MACHINE_NAME "Ultimaker"
+	#define FIRMWARE_URL "http://firmware.ultimaker.com"
+#else
+	#define MACHINE_NAME "Mendel"
+	#define FIRMWARE_URL "http://www.mendel-parts.com"
+#endif
+
+#define STRINGIFY_(n) #n
+#define STRINGIFY(n) STRINGIFY_(n)
+
+#if LANGUAGE_CHOICE == 1
+
+// LCD Menu Messages
+	#define WELCOME_MSG MACHINE_NAME " Ready."
+	#define MSG_SD_INSERTED "Card inserted"
+	#define MSG_SD_REMOVED "Card removed"
+	#define MSG_MAIN " Main \003"
+	#define MSG_AUTOSTART " Autostart"
+	#define MSG_DISABLE_STEPPERS " Disable Steppers"
+	#define MSG_AUTO_HOME " Auto Home"
+	#define MSG_SET_ORIGIN " Set Origin"
+	#define MSG_COOLDOWN " Cooldown"
+	#define MSG_EXTRUDE " Extrude"
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_MOVE_AXIS " Move Axis      \x7E"
+	#define MSG_SPEED " Speed:"
+	#define MSG_NOZZLE " \002Nozzle:"
+	#define MSG_NOZZLE1 " \002Nozzle2:"
+	#define MSG_NOZZLE2 " \002Nozzle3:"
+	#define MSG_BED " \002Bed:"
+	#define MSG_FAN_SPEED " Fan speed:"
+	#define MSG_FLOW " Flow:"
+	#define MSG_CONTROL " Control \003"
+	#define MSG_MIN " \002 Min:"
+	#define MSG_MAX " \002 Max:"
+	#define MSG_FACTOR " \002 Fact:"
+	#define MSG_AUTOTEMP " Autotemp:"
+	#define MSG_ON "On "
+	#define MSG_OFF "Off"
+	#define MSG_PID_P " PID-P: "
+	#define MSG_PID_I " PID-I: "
+	#define MSG_PID_D " PID-D: "
+	#define MSG_PID_C " PID-C: "
+	#define MSG_ACC  " Acc:"
+	#define MSG_VXY_JERK " Vxy-jerk: "
+	#define MSG_VMAX " Vmax "
+	#define MSG_X "x:"
+	#define MSG_Y "y:"
+	#define MSG_Z "z:"
+	#define MSG_E "e:"
+	#define MSG_VMIN " Vmin:"
+	#define MSG_VTRAV_MIN " VTrav min:"
+	#define MSG_AMAX " Amax "
+	#define MSG_A_RETRACT " A-retract:"
+	#define MSG_XSTEPS " Xsteps/mm:"
+	#define MSG_YSTEPS " Ysteps/mm:"
+	#define MSG_ZSTEPS " Zsteps/mm:"
+	#define MSG_ESTEPS " Esteps/mm:"
+	#define MSG_MAIN_WIDE " Main        \003"
+	#define MSG_RECTRACT_WIDE " Rectract    \x7E"
+	#define MSG_TEMPERATURE_WIDE " Temperature \x7E"
+	#define MSG_MOTION_WIDE " Motion      \x7E"
+	#define MSG_STORE_EPROM " Store memory"
+	#define MSG_LOAD_EPROM " Load memory"
+	#define MSG_RESTORE_FAILSAFE " Restore Failsafe"
+	#define MSG_REFRESH "\004Refresh"
+	#define MSG_WATCH " Watch   \003"
+	#define MSG_PREPARE " Prepare \x7E"
+	#define MSG_PREPARE_ALT " Prepare \003"
+	#define MSG_CONTROL_ARROW " Control \x7E"
+	#define MSG_RETRACT_ARROW " Control \x7E"
+	#define MSG_TUNE " Tune    \x7E"
+	#define MSG_STOP_PRINT " Stop Print   \x7E"
+	#define MSG_CARD_MENU " Card Menu    \x7E"
+	#define MSG_NO_CARD " No Card"
+	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+	#define MSG_DWELL "Sleep..."
+	#define MSG_USERWAIT "Wait for user..."
+	#define MSG_NO_MOVE "No move."
+	#define MSG_PART_RELEASE "Partial Release"
+	#define MSG_KILLED "KILLED. "
+	#define MSG_STOPPED "STOPPED. "
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_STEPPER_RELEASED "Released."
+  #define MSG_CONTROL_RETRACT  " Retract mm:"
+  #define MSG_CONTROL_RETRACTF " Retract  F:"
+  #define MSG_CONTROL_RETRACT_ZLIFT " Hop mm:"
+  #define MSG_CONTROL_RETRACT_RECOVER " UnRet +mm:"
+  #define MSG_CONTROL_RETRACT_RECOVERF " UnRet  F:"
+  #define MSG_AUTORETRACT " AutoRetr.:"
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "enqueing \""
+	#define MSG_POWERUP "PowerUp"
+	#define MSG_EXTERNAL_RESET " External Reset"
+	#define MSG_BROWNOUT_RESET " Brown out Reset"
+	#define MSG_WATCHDOG_RESET " Watchdog Reset"
+	#define MSG_SOFTWARE_RESET " Software Reset"
+	#define MSG_MARLIN "Marlin "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Last Updated: "
+	#define MSG_FREE_MEMORY " Free Memory: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Done saving file."
+	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+	#define MSG_FILE_PRINTED "Done printing file"
+	#define MSG_BEGIN_FILE_LIST "Begin file list"
+	#define MSG_END_FILE_LIST "End file list"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+	#define MSG_HEATING "Heating..."
+	#define MSG_HEATING_COMPLETE "Heating done."
+	#define MSG_BED_HEATING "Bed Heating."
+	#define MSG_BED_DONE "Bed done."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Count X:"
+	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
+	#define MSG_ERR_STOPPED "Printer stopped deu to errors. Fix the error and use M999 to restart!. (Temperature is reset. Set it before restarting)"
+	#define MSG_RESEND "Resend:"
+	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
+	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+	#define MSG_INVALID_EXTRUDER "Invalid extruder"
+	#define MSG_X_MIN "x_min:"
+	#define MSG_X_MAX "x_max:"
+	#define MSG_Y_MIN "y_min:"
+	#define MSG_Y_MAX "y_max:"
+	#define MSG_Z_MIN "z_min:"
+	#define MSG_Z_MAX "z_max:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+	#define MSG_SD_INIT_FAIL "SD init fail"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
+	#define MSG_SD_CARD_OK "SD card ok"
+	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
+	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+	#define MSG_SD_FILE_OPENED "File opened:"
+	#define MSG_SD_SIZE " Size:"
+	#define MSG_SD_FILE_SELECTED "File selected"
+	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
+	#define MSG_SD_PRINTING_BYTE "SD printing byte "
+	#define MSG_SD_NOT_PRINTING "Not SD printing"
+	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+
+	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
+	#define MSG_ENDSTOPS_HIT "endstops hit: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+#if LANGUAGE_CHOICE == 4
+
+// LCD Menu Messages
+
+	#define WELCOME_MSG MACHINE_NAME " Ready."
+
+	#define MSG_SD_INSERTED "Card inserted"
+	#define MSG_SD_REMOVED "Card removed"
+	#define MSG_MAIN " Main \003"
+	#define MSG_AUTOSTART " Autostart"
+	#define MSG_DISABLE_STEPPERS " Stepper abschalten"
+	#define MSG_AUTO_HOME " Auto Heim"
+	#define MSG_SET_ORIGIN " Position setzen"
+	#define MSG_PREHEAT_PLA " Aufheizen PLA"
+	#define MSG_PREHEAT_ABS " Aufheizen ABS"
+	#define MSG_COOLDOWN " Abkuehlen"
+	#define MSG_EXTRUDE " Extrude"
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_MOVE_AXIS " Move Axis      \x7E"
+	#define MSG_MOVE_AXIS " Achsen verfahren   \x7E"
+	#define MSG_SPEED " Geschw:"
+	#define MSG_NOZZLE " \002Duese:"
+	#define MSG_NOZZLE1 " \002Duese2:"
+	#define MSG_NOZZLE2 " \002Duese3:"
+	#define MSG_BED " \002Bett:"
+	#define MSG_FAN_SPEED " Luefter geschw.:"
+	#define MSG_FLOW " Fluss:"
+	#define MSG_CONTROL " Kontrolle \003"
+	#define MSG_MIN " \002 Min:"
+	#define MSG_MAX " \002 Max:"
+	#define MSG_FACTOR " \002 Faktor:"
+	#define MSG_AUTOTEMP " AutoTemp:"
+	#define MSG_ON "Ein "
+	#define MSG_OFF "Aus "
+	#define MSG_PID_P " PID-P: "
+	#define MSG_PID_I " PID-I: "
+	#define MSG_PID_D " PID-D: "
+	#define MSG_PID_C " PID-C: "
+	#define MSG_ACC  " Acc:"
+	#define MSG_VXY_JERK " Vxy-jerk: "
+	#define MSG_VMAX " Vmax "
+	#define MSG_X "x:"
+	#define MSG_Y "y:"
+	#define MSG_Z "z:"
+	#define MSG_E "e:"
+	#define MSG_VMIN " Vmin:"
+	#define MSG_VTRAV_MIN " VTrav min:"
+	#define MSG_AMAX " Amax "
+	#define MSG_A_RETRACT " A-retract:"
+	#define MSG_XSTEPS " Xsteps/mm:"
+	#define MSG_YSTEPS " Ysteps/mm:"
+	#define MSG_ZSTEPS " Zsteps/mm:"
+	#define MSG_ESTEPS " Esteps/mm:"
+	#define MSG_MAIN_WIDE " Main        \003"
+	#define MSG_TEMPERATURE_WIDE " Temperatur \x7E"
+	#define MSG_MOTION_WIDE " Motion      \x7E"
+	#define MSG_STORE_EPROM " EPROM speichern"
+	#define MSG_LOAD_EPROM "  EPROM laden"
+	#define MSG_RESTORE_FAILSAFE " Standard Konfig."
+	#define MSG_REFRESH "\004Refresh"
+	#define MSG_WATCH " Beobachten   \003"
+	#define MSG_PREPARE " Prepare \x7E"
+	#define MSG_PREPARE_ALT " Prepare \003"
+	#define MSG_CONTROL_ARROW " Control \x7E"
+	
+	#define MSG_TUNE " Tune    \x7E"
+	#define MSG_STOP_PRINT " Druck stoppen   \x7E"
+	#define MSG_CARD_MENU " SDKarten Menue    \x7E"
+	#define MSG_NO_CARD " Keine SDKarte"
+	#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Fehler in der  Menuestruktur."
+	#define MSG_DWELL "DWELL..."		
+	#define MSG_NO_MOVE "No move."
+	#define MSG_PART_RELEASE "Partial Release"
+	#define MSG_KILLED "KILLED. "
+	#define MSG_STOPPED "STOPPED. "
+	#define MSG_PREHEAT_PLA " Preheat PLA"
+	#define MSG_PREHEAT_ABS " Preheat ABS"
+	#define MSG_STEPPER_RELEASED "Released."
+	
+
+
+// Serial Console Messages
+
+	#define MSG_Enqueing "enqueing \""
+	#define MSG_POWERUP "PowerUp"
+	#define MSG_EXTERNAL_RESET " External Reset"
+	#define MSG_BROWNOUT_RESET " Brown out Reset"
+	#define MSG_WATCHDOG_RESET " Watchdog Reset"
+	#define MSG_SOFTWARE_RESET " Software Reset"
+	#define MSG_MARLIN "Marlin: "
+	#define MSG_AUTHOR " | Author: "
+	#define MSG_CONFIGURATION_VER " Last Updated: "
+	#define MSG_FREE_MEMORY " Free Memory: "
+	#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+	#define MSG_OK "ok"
+	#define MSG_FILE_SAVED "Done saving file."
+	#define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+	#define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+	#define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+	#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+	#define MSG_FILE_PRINTED "Done printing file"
+	#define MSG_BEGIN_FILE_LIST "Begin file list"
+	#define MSG_END_FILE_LIST "End file list"
+	#define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+	#define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+	#define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+	#define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+	#define MSG_HEATING "Heating..."
+	#define MSG_HEATING_COMPLETE "Heating done."
+	#define MSG_BED_HEATING "Bed Heating."
+	#define MSG_BED_DONE "Bed done."
+	#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+	#define MSG_COUNT_X " Count X:"
+	#define MSG_ERR_KILLED "Printer halted. kill() called !!"
+	#define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart!"
+	#define MSG_RESEND "Resend:"
+	#define MSG_UNKNOWN_COMMAND "Unknown command:\""
+	#define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+	#define MSG_INVALID_EXTRUDER "Invalid extruder"
+	#define MSG_X_MIN "x_min:"
+	#define MSG_X_MAX "x_max:"
+	#define MSG_Y_MIN "y_min:"
+	#define MSG_Y_MAX "y_max:"
+	#define MSG_Z_MIN "z_min:"
+	#define MSG_Z_MAX "z_max:"
+
+	#define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+	#define MSG_SD_INIT_FAIL "SD init fail"
+	#define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+	#define MSG_SD_OPENROOT_FAIL "openRoot failed"
+	#define MSG_SD_CARD_OK "SD card ok"
+	#define MSG_SD_WORKDIR_FAIL "workDir open failed"
+	#define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+	#define MSG_SD_FILE_OPENED "File opened:"
+	#define MSG_SD_SIZE " Size:"
+	#define MSG_SD_FILE_SELECTED "File selected"
+	#define MSG_SD_WRITE_TO_FILE "Writing to file: "
+	#define MSG_SD_PRINTING_BYTE "SD printing byte "
+	#define MSG_SD_NOT_PRINTING "Not SD printing"
+	#define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+	#define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+
+	#define MSG_STEPPER_TO_HIGH "Steprate to high : "
+	#define MSG_ENDSTOPS_HIT "endstops hit: "
+	#define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+	#define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
+
+#endif
+
+#if LANGUAGE_CHOICE == 5
+
+// LCD Menu Messages
+#define WELCOME_MSG MACHINE_NAME " Lista."
+#define MSG_SD_INSERTED "Tarjeta SD Colocada"
+#define MSG_SD_REMOVED "Tarjeta SD Retirada"
+#define MSG_MAIN " Menu Principal \003"
+#define MSG_AUTOSTART " Autostart"
+#define MSG_DISABLE_STEPPERS " Apagar Motores"
+#define MSG_AUTO_HOME " Llevar Ejes al Cero"
+#define MSG_SET_ORIGIN " Establecer Cero"
+#define MSG_COOLDOWN " Enfriar"
+#define MSG_EXTRUDE " Extruir"
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_MOVE_AXIS " Mover Ejes      \x7E"
+#define MSG_SPEED " Velocidad:"
+#define MSG_NOZZLE " \002Nozzle:"
+#define MSG_NOZZLE1 " \002Nozzle2:"
+#define MSG_NOZZLE2 " \002Nozzle3:"
+#define MSG_BED " \002Base:"
+#define MSG_FAN_SPEED " Ventilador:"
+#define MSG_FLOW " Flujo:"
+#define MSG_CONTROL " Control \003"
+#define MSG_MIN " \002 Min:"
+#define MSG_MAX " \002 Max:"
+#define MSG_FACTOR " \002 Fact:"
+#define MSG_AUTOTEMP " Autotemp:"
+#define MSG_ON "On "
+#define MSG_OFF "Off"
+#define MSG_PID_P " PID-P: "
+#define MSG_PID_I " PID-I: "
+#define MSG_PID_D " PID-D: "
+#define MSG_PID_C " PID-C: "
+#define MSG_ACC  " Acc:"
+#define MSG_VXY_JERK " Vxy-jerk: "
+#define MSG_VMAX " Vmax "
+#define MSG_X "x:"
+#define MSG_Y "y:"
+#define MSG_Z "z:"
+#define MSG_E "e:"
+#define MSG_VMIN " Vmin:"
+#define MSG_VTRAV_MIN " VTrav min:"
+#define MSG_AMAX " Amax "
+#define MSG_A_RETRACT " A-retrac.:"
+#define MSG_XSTEPS " Xpasos/mm:"
+#define MSG_YSTEPS " Ypasos/mm:"
+#define MSG_ZSTEPS " Zpasos/mm:"
+#define MSG_ESTEPS " Epasos/mm:"
+#define MSG_MAIN_WIDE " Menu Principal  \003"
+#define MSG_RECTRACT_WIDE " Retraer         \x7E"
+#define MSG_TEMPERATURE_WIDE " Temperatura     \x7E"
+#define MSG_MOTION_WIDE " Movimiento      \x7E"
+#define MSG_STORE_EPROM " Guardar Memoria"
+#define MSG_LOAD_EPROM " Cargar Memoria"
+#define MSG_RESTORE_FAILSAFE " Rest. de emergencia"
+#define MSG_REFRESH "\004Volver a cargar"
+#define MSG_WATCH " Monitorizar \003"
+#define MSG_PREPARE " Preparar \x7E"
+#define MSG_PREPARE_ALT " Preparar \003"
+#define MSG_CONTROL_ARROW " Control  \x7E"
+#define MSG_RETRACT_ARROW " Control  \x7E"
+#define MSG_TUNE " Ajustar \x7E"
+#define MSG_STOP_PRINT " Detener Impresion \x7E"
+#define MSG_CARD_MENU " Menu de SD    \x7E"
+#define MSG_NO_CARD " No hay Tarjeta SD"
+#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Hay un error en la estructura del menu"
+#define MSG_DWELL "Reposo..."
+#define MSG_USERWAIT "Esperando Ordenes..."
+#define MSG_NO_MOVE "Sin movimiento"
+#define MSG_PART_RELEASE "Desacople Parcial"
+#define MSG_KILLED "PARADA DE EMERGENCIA. "
+#define MSG_STOPPED "PARADA. "
+#define MSG_PREHEAT_PLA " Precalentar PLA"
+#define MSG_PREHEAT_ABS " Precalentar ABS"
+#define MSG_STEPPER_RELEASED "Desacoplada."
+#define MSG_CONTROL_RETRACT  " Retraer mm:"
+#define MSG_CONTROL_RETRACTF " Retraer  F:"
+#define MSG_CONTROL_RETRACT_ZLIFT " Levantar mm:"
+#define MSG_CONTROL_RETRACT_RECOVER " DesRet +mm:"
+#define MSG_CONTROL_RETRACT_RECOVERF " DesRet F:"
+#define MSG_AUTORETRACT " AutoRetr.:"
+
+// Serial Console Messages
+
+#define MSG_Enqueing "En cola \""
+#define MSG_POWERUP "PowerUp"
+#define MSG_EXTERNAL_RESET " Reset Externo"
+#define MSG_BROWNOUT_RESET " Reset por Voltaje Incorrecto"
+#define MSG_WATCHDOG_RESET " Reset por Bloqueo"
+#define MSG_SOFTWARE_RESET " Reset por Software"
+#define MSG_MARLIN "Marlin "
+#define MSG_AUTHOR " | Autor: "
+#define MSG_CONFIGURATION_VER " Ultima actualizacion: "
+#define MSG_FREE_MEMORY " Memoria libre: "
+#define MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+#define MSG_OK "ok"
+#define MSG_FILE_SAVED "Guardado."
+#define MSG_ERR_LINE_NO "El Numero de Linea no es igual al Ultimo Numero de Linea+1, Ultima Linea:"
+#define MSG_ERR_CHECKSUM_MISMATCH "el checksum no coincide, Ultima Linea:"
+#define MSG_ERR_NO_CHECKSUM "No se pudo hallar el Checksum con el numero de linea, Ultima Linea:"
+#define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No se hallo el Numero de Linea con el Checksum, Ultima Linea:"
+#define MSG_FILE_PRINTED "Impresion terminada"
+#define MSG_BEGIN_FILE_LIST "Comienzo de la lista de archivos"
+#define MSG_END_FILE_LIST "Fin de la lista de archivos"
+#define MSG_M104_INVALID_EXTRUDER "M104 Extrusor Invalido "
+#define MSG_M105_INVALID_EXTRUDER "M105 Extrusor Invalido "
+#define MSG_ERR_NO_THERMISTORS "No hay termistores - no temp"
+#define MSG_M109_INVALID_EXTRUDER "M109 Extrusor Invalido "
+#define MSG_HEATING "Calentando..."
+#define MSG_HEATING_COMPLETE "Calentamiento Hecho."
+#define MSG_BED_HEATING "Calentando la base."
+#define MSG_BED_DONE "Base Caliente."
+#define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) "\n"
+#define MSG_COUNT_X " Cuenta X:"
+#define MSG_ERR_KILLED "¡¡Impresora Parada con kill()!!"
+#define MSG_ERR_STOPPED "¡Impresora parada por errores. Arregle el error y use M999 Para reiniciar!. (La temperatura se reestablece. Ajustela antes de continuar)"
+#define MSG_RESEND "Reenviar:"
+#define MSG_UNKNOWN_COMMAND "Comando Desconocido:\""
+#define MSG_ACTIVE_EXTRUDER "Extrusor Activo: "
+#define MSG_INVALID_EXTRUDER "Extrusor Invalido"
+#define MSG_X_MIN "x_min:"
+#define MSG_X_MAX "x_max:"
+#define MSG_Y_MIN "y_min:"
+#define MSG_Y_MAX "y_max:"
+#define MSG_Z_MIN "z_min:"
+#define MSG_Z_MAX "z_max:"
+
+#define MSG_SD_CANT_OPEN_SUBDIR "No se pudo abrir la subcarpeta."
+#define MSG_SD_INIT_FAIL "Fallo al iniciar la SD"
+#define MSG_SD_VOL_INIT_FAIL "Fallo al montar el volumen"
+#define MSG_SD_OPENROOT_FAIL "Fallo al abrir la carpeta raiz"
+#define MSG_SD_CARD_OK "Tarjeta SD OK"
+#define MSG_SD_WORKDIR_FAIL "Fallo al abrir la carpeta de trabajo"
+#define MSG_SD_OPEN_FILE_FAIL "Error al abrir, Archivo: "
+#define MSG_SD_FILE_OPENED "Archivo abierto:"
+#define MSG_SD_SIZE " Tamaño:"
+#define MSG_SD_FILE_SELECTED "Archivo Seleccionado"
+#define MSG_SD_WRITE_TO_FILE "Escribiendo en el archivo: "
+#define MSG_SD_PRINTING_BYTE "SD imprimiendo el byte "
+#define MSG_SD_NOT_PRINTING "No se esta imprimiendo con SD"
+#define MSG_SD_ERR_WRITE_TO_FILE "Error al escribir en el archivo"
+#define MSG_SD_CANT_ENTER_SUBDIR "No se puede entrar en la carpeta:"
+
+#define MSG_STEPPER_TO_HIGH "Steprate demasiado alto : "
+#define MSG_ENDSTOPS_HIT "Se ha tocado el fin de carril: "
+#define MSG_ERR_COLD_EXTRUDE_STOP " extrusion fria evitada"
+#define MSG_ERR_LONG_EXTRUDE_STOP " extrusion demasiado larga evitada"
+
+#endif
+#endif // ifndef LANGUAGE_H
+>>>>>>> 6cd150842f6741b75cd7b5911805f307d1dbc2eb