|
|
|
|
@ -1,5 +1,5 @@
|
|
|
|
|
/*
|
|
|
|
|
temperature.c - temperature control
|
|
|
|
|
temperature.cpp - temperature control
|
|
|
|
|
Part of Marlin
|
|
|
|
|
|
|
|
|
|
Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
|
|
|
@ -16,18 +16,7 @@
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
This firmware is a mashup between Sprinter and grbl.
|
|
|
|
|
(https://github.com/kliment/Sprinter)
|
|
|
|
|
(https://github.com/simen/grbl/tree)
|
|
|
|
|
|
|
|
|
|
It has preliminary support for Matthew Roberts advance algorithm
|
|
|
|
|
http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
|
|
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "Marlin.h"
|
|
|
|
|
#include "ultralcd.h"
|
|
|
|
|
@ -87,14 +76,15 @@ unsigned char soft_pwm_bed;
|
|
|
|
|
#define HAS_HEATER_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0)
|
|
|
|
|
#define HAS_BED_THERMAL_PROTECTION (defined(THERMAL_RUNAWAY_PROTECTION_BED_PERIOD) && THERMAL_RUNAWAY_PROTECTION_BED_PERIOD > 0 && TEMP_SENSOR_BED != 0)
|
|
|
|
|
#if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
|
|
|
|
|
enum TRState { TRInactive, TRFirstHeating, TRStable };
|
|
|
|
|
static bool thermal_runaway = false;
|
|
|
|
|
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
|
|
|
|
|
void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc);
|
|
|
|
|
#if HAS_HEATER_THERMAL_PROTECTION
|
|
|
|
|
static int thermal_runaway_state_machine[4]; // = {0,0,0,0};
|
|
|
|
|
static TRState thermal_runaway_state_machine[4] = { TRInactive, TRInactive, TRInactive, TRInactive };
|
|
|
|
|
static unsigned long thermal_runaway_timer[4]; // = {0,0,0,0};
|
|
|
|
|
#endif
|
|
|
|
|
#if HAS_BED_THERMAL_PROTECTION
|
|
|
|
|
static int thermal_runaway_bed_state_machine;
|
|
|
|
|
static TRState thermal_runaway_bed_state_machine = { TRInactive, TRInactive, TRInactive, TRInactive };
|
|
|
|
|
static unsigned long thermal_runaway_bed_timer;
|
|
|
|
|
#endif
|
|
|
|
|
#endif
|
|
|
|
|
@ -238,7 +228,7 @@ void PID_autotune(float temp, int extruder, int ncycles)
|
|
|
|
|
soft_pwm[extruder] = bias = d = PID_MAX / 2;
|
|
|
|
|
|
|
|
|
|
// PID Tuning loop
|
|
|
|
|
for(;;) {
|
|
|
|
|
for (;;) {
|
|
|
|
|
|
|
|
|
|
unsigned long ms = millis();
|
|
|
|
|
|
|
|
|
|
@ -609,7 +599,7 @@ void manage_heater() {
|
|
|
|
|
// Loop through all extruders
|
|
|
|
|
for (int e = 0; e < EXTRUDERS; e++) {
|
|
|
|
|
|
|
|
|
|
#if defined (THERMAL_RUNAWAY_PROTECTION_PERIOD) && THERMAL_RUNAWAY_PROTECTION_PERIOD > 0
|
|
|
|
|
#if HAS_HEATER_THERMAL_PROTECTION
|
|
|
|
|
thermal_runaway_protection(&thermal_runaway_state_machine[e], &thermal_runaway_timer[e], current_temperature[e], target_temperature[e], e, THERMAL_RUNAWAY_PROTECTION_PERIOD, THERMAL_RUNAWAY_PROTECTION_HYSTERESIS);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
@ -637,7 +627,7 @@ void manage_heater() {
|
|
|
|
|
disable_heater();
|
|
|
|
|
_temp_error(0, PSTR(MSG_EXTRUDER_SWITCHED_OFF), PSTR(MSG_ERR_REDUNDANT_TEMP));
|
|
|
|
|
}
|
|
|
|
|
#endif //TEMP_SENSOR_1_AS_REDUNDANT
|
|
|
|
|
#endif // TEMP_SENSOR_1_AS_REDUNDANT
|
|
|
|
|
|
|
|
|
|
} // Extruders Loop
|
|
|
|
|
|
|
|
|
|
@ -656,7 +646,7 @@ void manage_heater() {
|
|
|
|
|
#if TEMP_SENSOR_BED != 0
|
|
|
|
|
|
|
|
|
|
#if HAS_BED_THERMAL_PROTECTION
|
|
|
|
|
thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, 9, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS);
|
|
|
|
|
thermal_runaway_protection(&thermal_runaway_bed_state_machine, &thermal_runaway_bed_timer, current_temperature_bed, target_temperature_bed, -1, THERMAL_RUNAWAY_PROTECTION_BED_PERIOD, THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS);
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifdef PIDTEMPBED
|
|
|
|
|
@ -1014,69 +1004,76 @@ void setWatch() {
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#if HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
|
|
|
|
|
void thermal_runaway_protection(int *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc)
|
|
|
|
|
{
|
|
|
|
|
/*
|
|
|
|
|
SERIAL_ECHO_START;
|
|
|
|
|
SERIAL_ECHO("Thermal Thermal Runaway Running. Heater ID:");
|
|
|
|
|
SERIAL_ECHO(heater_id);
|
|
|
|
|
SERIAL_ECHO(" ; State:");
|
|
|
|
|
SERIAL_ECHO(*state);
|
|
|
|
|
SERIAL_ECHO(" ; Timer:");
|
|
|
|
|
SERIAL_ECHO(*timer);
|
|
|
|
|
SERIAL_ECHO(" ; Temperature:");
|
|
|
|
|
SERIAL_ECHO(temperature);
|
|
|
|
|
SERIAL_ECHO(" ; Target Temp:");
|
|
|
|
|
SERIAL_ECHO(target_temperature);
|
|
|
|
|
SERIAL_ECHOLN("");
|
|
|
|
|
*/
|
|
|
|
|
if ((target_temperature == 0) || thermal_runaway)
|
|
|
|
|
{
|
|
|
|
|
*state = 0;
|
|
|
|
|
*timer = 0;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
switch (*state)
|
|
|
|
|
{
|
|
|
|
|
case 0: // "Heater Inactive" state
|
|
|
|
|
if (target_temperature > 0) *state = 1;
|
|
|
|
|
break;
|
|
|
|
|
case 1: // "First Heating" state
|
|
|
|
|
if (temperature >= target_temperature) *state = 2;
|
|
|
|
|
break;
|
|
|
|
|
case 2: // "Temperature Stable" state
|
|
|
|
|
{
|
|
|
|
|
unsigned long ms = millis();
|
|
|
|
|
if (temperature >= (target_temperature - hysteresis_degc))
|
|
|
|
|
{
|
|
|
|
|
*timer = ms;
|
|
|
|
|
}
|
|
|
|
|
else if ( (ms - *timer) > ((unsigned long) period_seconds) * 1000)
|
|
|
|
|
|
|
|
|
|
void thermal_runaway_protection(TRState *state, unsigned long *timer, float temperature, float target_temperature, int heater_id, int period_seconds, int hysteresis_degc) {
|
|
|
|
|
|
|
|
|
|
static int tr_target_temperature[EXTRUDERS+1];
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
SERIAL_ECHO_START;
|
|
|
|
|
SERIAL_ECHOPGM("Thermal Thermal Runaway Running. Heater ID: ");
|
|
|
|
|
if (heater_id < 0) SERIAL_ECHOPGM("bed"); else SERIAL_ECHOPGM(heater_id);
|
|
|
|
|
SERIAL_ECHOPGM(" ; State:");
|
|
|
|
|
SERIAL_ECHOPGM(*state);
|
|
|
|
|
SERIAL_ECHOPGM(" ; Timer:");
|
|
|
|
|
SERIAL_ECHOPGM(*timer);
|
|
|
|
|
SERIAL_ECHOPGM(" ; Temperature:");
|
|
|
|
|
SERIAL_ECHOPGM(temperature);
|
|
|
|
|
SERIAL_ECHOPGM(" ; Target Temp:");
|
|
|
|
|
SERIAL_ECHOPGM(target_temperature);
|
|
|
|
|
SERIAL_EOL;
|
|
|
|
|
*/
|
|
|
|
|
if (target_temperature == 0 || thermal_runaway) {
|
|
|
|
|
*state = TRInactive;
|
|
|
|
|
*timer = 0;
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
int heater_index = heater_id >= 0 ? heater_id : EXTRUDERS;
|
|
|
|
|
|
|
|
|
|
switch (*state) {
|
|
|
|
|
// Inactive state waits for a target temperature to be set
|
|
|
|
|
case TRInactive:
|
|
|
|
|
if (target_temperature > 0) {
|
|
|
|
|
*state = TRFirstHeating;
|
|
|
|
|
tr_target_temperature[heater_index] = target_temperature;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
// When first heating, wait for the temperature to be reached then go to Stable state
|
|
|
|
|
case TRFirstHeating:
|
|
|
|
|
if (temperature >= tr_target_temperature[heater_index]) *state = TRStable;
|
|
|
|
|
break;
|
|
|
|
|
// While the temperature is stable watch for a bad temperature
|
|
|
|
|
case TRStable:
|
|
|
|
|
{
|
|
|
|
|
SERIAL_ERROR_START;
|
|
|
|
|
SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
|
|
|
|
|
SERIAL_ERRORLN((int)heater_id);
|
|
|
|
|
LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY); // translatable
|
|
|
|
|
thermal_runaway = true;
|
|
|
|
|
while(1)
|
|
|
|
|
{
|
|
|
|
|
disable_heater();
|
|
|
|
|
disable_x();
|
|
|
|
|
disable_y();
|
|
|
|
|
disable_z();
|
|
|
|
|
disable_e0();
|
|
|
|
|
disable_e1();
|
|
|
|
|
disable_e2();
|
|
|
|
|
disable_e3();
|
|
|
|
|
manage_heater();
|
|
|
|
|
lcd_update();
|
|
|
|
|
// If the target temperature changes, restart
|
|
|
|
|
if (tr_target_temperature[heater_index] != target_temperature) {
|
|
|
|
|
*state = TRInactive;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} break;
|
|
|
|
|
|
|
|
|
|
// If the temperature is over the target (-hysteresis) restart the timer
|
|
|
|
|
if (temperature >= tr_target_temperature[heater_index] - hysteresis_degc) *timer = millis();
|
|
|
|
|
|
|
|
|
|
// If the timer goes too long without a reset, trigger shutdown
|
|
|
|
|
else if (millis() > *timer + period_seconds * 1000UL) {
|
|
|
|
|
SERIAL_ERROR_START;
|
|
|
|
|
SERIAL_ERRORLNPGM(MSG_THERMAL_RUNAWAY_STOP);
|
|
|
|
|
if (heater_id < 0) SERIAL_ERRORLNPGM("bed"); else SERIAL_ERRORLN(heater_id);
|
|
|
|
|
LCD_ALERTMESSAGEPGM(MSG_THERMAL_RUNAWAY);
|
|
|
|
|
thermal_runaway = true;
|
|
|
|
|
for (;;) {
|
|
|
|
|
disable_heater();
|
|
|
|
|
disable_all_steppers();
|
|
|
|
|
manage_heater();
|
|
|
|
|
lcd_update();
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
#endif //THERMAL_RUNAWAY_PROTECTION_PERIOD
|
|
|
|
|
|
|
|
|
|
#endif // HAS_HEATER_THERMAL_PROTECTION || HAS_BED_THERMAL_PROTECTION
|
|
|
|
|
|
|
|
|
|
void disable_heater() {
|
|
|
|
|
for (int i=0; i<EXTRUDERS; i++) setTargetHotend(0, i);
|
|
|
|
|
|
Scott Lahteine
9 years ago