From 4f7c6dfe35faf351214e8d31a99fa61a9d95603b Mon Sep 17 00:00:00 2001 From: phq1910 Date: Thu, 26 Sep 2013 11:40:54 -0300 Subject: [PATCH] Update pins.h Include Pins cpu Sethi 3D --- Marlin/pins.h | 77 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/Marlin/pins.h b/Marlin/pins.h index cbc45abc7..1ae3cb486 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -53,6 +53,83 @@ #endif /* 99 */ +/**************************************************************************************** +* Sethi 3D_1 pin assignment - www.sethi3d.com.br +* +****************************************************************************************/ + +#if MOTHERBOARD == 20 +#define KNOWN_BOARD + +#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__) +#error Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu. + +#endif + +#ifndef GEN7_VERSION +#define GEN7_VERSION 12 // v1.x +#endif + +//x axis pins +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 +#define X_STOP_PIN 2 + +//y axis pins +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 +#define Y_STOP_PIN 0 + +//z axis pins +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 + +//extruder pins +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 + +#define TEMP_0_PIN 1 +#define TEMP_1_PIN -1 +#define TEMP_2_PIN -1 +#define TEMP_BED_PIN 2 + +#define HEATER_0_PIN 4 +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 +#define HEATER_BED_PIN 3 + +#define KILL_PIN -1 + +#define SDPOWER -1 +#define SDSS -1 // SCL pin of I2C header +#define LED_PIN -1 + +#if (GEN7_VERSION >= 13) +// Gen7 v1.3 removed the fan pin +#define FAN_PIN -1 +#else +#define FAN_PIN 31 +#endif +#define PS_ON_PIN 15 + +//All these generations of Gen7 supply thermistor power +//via PS_ON, so ignore bad thermistor readings +#define BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE + +//our pin for debugging. +#define DEBUG_PIN 0 + +//our RS485 pins +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 + +#endif /**************************************************************************************** * Gen7 v1.1, v1.2, v1.3 pin assignment