From cd769781a1629868c15ee7907f85a8ebe74d4ddf Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 16:56:37 -0800
Subject: [PATCH 01/11] M0-M1 Enhancements
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
---
 Marlin/Marlin_main.cpp | 22 +++++++++++++++++++---
 Marlin/ultralcd.cpp    | 30 ++++++++++++++++++++++++++++--
 Marlin/ultralcd.h      |  2 ++
 3 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 4f691b036..d80913deb 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1841,11 +1841,26 @@ void process_commands()
     case 0: // M0 - Unconditional stop - Wait for user button press on LCD
     case 1: // M1 - Conditional stop - Wait for user button press on LCD
     {
-      LCD_MESSAGEPGM(MSG_USERWAIT);
+      char *src = strchr_pointer + 2;
+
       codenum = 0;
-      if(code_seen('P')) codenum = code_value(); // milliseconds to wait
-      if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
 
+      bool hasP = code_seen('P');
+      if (hasP) codenum = code_value(); // milliseconds to wait
+
+      bool hasS = code_seen('S');
+      if (hasS) codenum = code_value() * 1000; // seconds to wait
+
+      if (!hasP && !hasS && *src != '\0') {
+        while (*src == ' ') ++src;
+        starpos = strchr(src, '*');
+        if (starpos != NULL) *(starpos) = '\0';
+        lcd_setstatus(src);
+      } else {
+        LCD_MESSAGEPGM(MSG_USERWAIT);
+      }
+
+      lcd_ignore_click();
       st_synchronize();
       previous_millis_cmd = millis();
       if (codenum > 0){
@@ -1855,6 +1870,7 @@ void process_commands()
           manage_inactivity();
           lcd_update();
         }
+        lcd_ignore_click(false);
       }else{
         while(!lcd_clicked()){
           manage_heater();
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index fb2ddbfff..b9e9549d8 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -162,6 +162,7 @@ bool lcd_oldcardstatus;
 menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently active menu */
 uint32_t lcd_next_update_millis;
 uint8_t lcd_status_update_delay;
+bool ignore_click = false;
 uint8_t lcdDrawUpdate = 2;                  /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */
 
 //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
@@ -189,7 +190,8 @@ static void lcd_status_screen()
         lcd_status_update_delay = 10;   /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
     }
 #ifdef ULTIPANEL
-    if (LCD_CLICKED)
+
+    if (lcd_clicked())
     {
         currentMenu = lcd_main_menu;
         encoderPosition = 0;
@@ -1289,6 +1291,11 @@ void lcd_update()
     }
 }
 
+void lcd_ignore_click(bool b)
+{
+    ignore_click = b;
+}
+
 void lcd_setstatus(const char* message)
 {
     if (lcd_status_message_level > 0)
@@ -1418,7 +1425,26 @@ void lcd_buzz(long duration, uint16_t freq)
 
 bool lcd_clicked()
 {
-  return LCD_CLICKED;
+  static bool wait_for_unclick = false;
+  bool current_click = LCD_CLICKED;
+
+  if (ignore_click) {
+    if (wait_for_unclick) {
+      if (!current_click) {
+        ignore_click = wait_for_unclick = false;
+      }
+      else {
+        current_click = false;
+      }
+    }
+    else if (current_click) {
+      wait_for_unclick = true;
+      current_click = false;
+      lcd_quick_feedback();
+    }
+  }
+
+  return current_click;
 }
 #endif//ULTIPANEL
 
diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h
index 9bf685805..761cd5f01 100644
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@@ -48,6 +48,8 @@
   void lcd_buzz(long duration,uint16_t freq);
   bool lcd_clicked();
 
+  void lcd_ignore_click(bool b=true);
+
   #ifdef NEWPANEL
     #define EN_C (1<<BLEN_C)
     #define EN_B (1<<BLEN_B)

From aa4160ba62714bb96bde9d3dffab6b5f0c1d9213 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 17:12:08 -0800
Subject: [PATCH 02/11] Relocate click ignore code into info screen

---
 Marlin/ultralcd.cpp | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index b9e9549d8..a2749ccb1 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -163,6 +163,7 @@ menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently
 uint32_t lcd_next_update_millis;
 uint8_t lcd_status_update_delay;
 bool ignore_click = false;
+bool wait_for_unclick;
 uint8_t lcdDrawUpdate = 2;                  /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */
 
 //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
@@ -191,7 +192,25 @@ static void lcd_status_screen()
     }
 #ifdef ULTIPANEL
 
-    if (lcd_clicked())
+    bool current_click = LCD_CLICKED;
+
+    if (ignore_click) {
+        if (wait_for_unclick) {
+          if (!current_click) {
+              ignore_click = wait_for_unclick = false;
+          }
+          else {
+              current_click = false;
+          }
+        }
+        else if (current_click) {
+            lcd_quick_feedback();
+            wait_for_unclick = true;
+            current_click = false;
+        }
+    }
+
+    if (current_click)
     {
         currentMenu = lcd_main_menu;
         encoderPosition = 0;
@@ -1294,6 +1313,7 @@ void lcd_update()
 void lcd_ignore_click(bool b)
 {
     ignore_click = b;
+    wait_for_unclick = false;
 }
 
 void lcd_setstatus(const char* message)
@@ -1425,26 +1445,7 @@ void lcd_buzz(long duration, uint16_t freq)
 
 bool lcd_clicked()
 {
-  static bool wait_for_unclick = false;
-  bool current_click = LCD_CLICKED;
-
-  if (ignore_click) {
-    if (wait_for_unclick) {
-      if (!current_click) {
-        ignore_click = wait_for_unclick = false;
-      }
-      else {
-        current_click = false;
-      }
-    }
-    else if (current_click) {
-      wait_for_unclick = true;
-      current_click = false;
-      lcd_quick_feedback();
-    }
-  }
-
-  return current_click;
+  return LCD_CLICKED;
 }
 #endif//ULTIPANEL
 

From 7681711e7e65d787110b97611bb7c10cea394af2 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 18:50:11 -0800
Subject: [PATCH 03/11] Clear LCD to welcome_msg if not printing
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The welcome message is more appropriate than “resuming print” if
nothing is printing.
---
 Marlin/Marlin_main.cpp | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index d80913deb..a25a5f036 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1363,7 +1363,7 @@ void process_commands()
       st_synchronize();
       codenum += millis();  // keep track of when we started waiting
       previous_millis_cmd = millis();
-      while(millis()  < codenum ){
+      while(millis() < codenum) {
         manage_heater();
         manage_inactivity();
         lcd_update();
@@ -1391,7 +1391,6 @@ void process_commands()
       plan_bed_level_matrix.set_to_identity();  //Reset the plane ("erase" all leveling data)
 #endif //ENABLE_AUTO_BED_LEVELING
 
-
       saved_feedrate = feedrate;
       saved_feedmultiply = feedmultiply;
       feedmultiply = 100;
@@ -1437,7 +1436,7 @@ void process_commands()
 #else // NOT DELTA
 
       home_all_axis = !((code_seen(axis_codes[X_AXIS])) || (code_seen(axis_codes[Y_AXIS])) || (code_seen(axis_codes[Z_AXIS])));
-	  
+
       #if Z_HOME_DIR > 0                      // If homing away from BED do Z first
       if((home_all_axis) || (code_seen(axis_codes[Z_AXIS]))) {
         HOMEAXIS(Z);
@@ -1852,9 +1851,9 @@ void process_commands()
       if (hasS) codenum = code_value() * 1000; // seconds to wait
 
       if (!hasP && !hasS && *src != '\0') {
-        while (*src == ' ') ++src;
         starpos = strchr(src, '*');
         if (starpos != NULL) *(starpos) = '\0';
+        while (*src == ' ') ++src;
         lcd_setstatus(src);
       } else {
         LCD_MESSAGEPGM(MSG_USERWAIT);
@@ -1865,7 +1864,7 @@ void process_commands()
       previous_millis_cmd = millis();
       if (codenum > 0){
         codenum += millis();  // keep track of when we started waiting
-        while(millis()  < codenum && !lcd_clicked()){
+        while(millis() < codenum && !lcd_clicked()){
           manage_heater();
           manage_inactivity();
           lcd_update();
@@ -1878,7 +1877,10 @@ void process_commands()
           lcd_update();
         }
       }
-      LCD_MESSAGEPGM(MSG_RESUMING);
+      if (IS_SD_PRINTING)
+        LCD_MESSAGEPGM(MSG_RESUMING);
+      else
+        LCD_MESSAGEPGM(WELCOME_MSG);
     }
     break;
 #endif

From d407a43ac1ab447d3e7f825cd867535e19ec8062 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 26 Nov 2014 09:21:37 -0800
Subject: [PATCH 04/11] Ignore S and P if no value >0 is included.

---
 Marlin/Marlin_main.cpp | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index a25a5f036..d5dbd6329 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1844,12 +1844,15 @@ void process_commands()
 
       codenum = 0;
 
-      bool hasP = code_seen('P');
-      if (hasP) codenum = code_value(); // milliseconds to wait
-
-      bool hasS = code_seen('S');
-      if (hasS) codenum = code_value() * 1000; // seconds to wait
-
+      bool hasP = false, hasS = false;
+      if (code_seen('P')) {
+        codenum = code_value(); // milliseconds to wait
+        hasP = codenum > 0;
+      }
+      if (code_seen('S')) {
+        codenum = code_value() * 1000; // seconds to wait
+        hasS = codenum > 0;
+      }
       if (!hasP && !hasS && *src != '\0') {
         starpos = strchr(src, '*');
         if (starpos != NULL) *(starpos) = '\0';

From 5714f649278f65f916ccc77d194dddb80c9d5d9e Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 26 Nov 2014 21:00:02 -0800
Subject: [PATCH 05/11] get latest Marlin_v1 changes

---
 .travis.yml                                   |  14 ++
 DEADJOE                                       |  53 +++++
 Marlin/Configuration.h                        |  36 ++-
 Marlin/ConfigurationStore.cpp                 |  12 +-
 Marlin/DOGMbitmaps.h                          | 204 +++++++++++++----
 Marlin/Marlin.h                               |  12 +-
 Marlin/MarlinSerial.cpp                       |   2 +-
 Marlin/Marlin_main.cpp                        | 142 +++++++++---
 Marlin/dogm_lcd_implementation.h              |   6 -
 .../delta/Configuration.h                     | 212 +++++++++++++++---
 .../delta/Configuration_adv.h                 |  15 +-
 Marlin/language.h                             |  17 +-
 Marlin/motion_control.cpp                     |   8 +
 Marlin/pins.h                                 |  28 ++-
 Marlin/planner.cpp                            |  47 ++++
 Marlin/stepper.cpp                            |   2 +-
 Marlin/temperature.cpp                        | 123 +++++++++-
 Marlin/temperature.h                          |   8 +
 Marlin/thermistortables.h                     |  69 ++++++
 Marlin/ultralcd.cpp                           |  28 ++-
 .../ultralcd_implementation_hitachi_HD44780.h |   2 +-
 README.md                                     |   5 +
 22 files changed, 905 insertions(+), 140 deletions(-)
 create mode 100644 .travis.yml
 create mode 100644 DEADJOE

diff --git a/.travis.yml b/.travis.yml
new file mode 100644
index 000000000..c646ff080
--- /dev/null
+++ b/.travis.yml
@@ -0,0 +1,14 @@
+---
+language: c
+
+before_install:
+  - sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
+  - sudo apt-get update -qq
+install:
+  - sudo apt-get install -qq gcc-avr binutils-avr avr-libc gcc-4.8 g++-4.8 arduino
+  - sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 90
+  - sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.8 90
+  - gcc --version
+  - g++ --version
+
+script: "cd Marlin && make HARDWARE_MOTHERBOARD=70 ARDUINO_INSTALL_DIR=/usr/share/arduino"
diff --git a/DEADJOE b/DEADJOE
new file mode 100644
index 000000000..acfa30191
--- /dev/null
+++ b/DEADJOE
@@ -0,0 +1,53 @@
+
+*** These modified files were found in JOE when it aborted on Wed Nov 26 20:52:44 2014
+*** JOE was aborted because the terminal closed
+
+*** File '/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG'
+Merge remote-tracking branch 'upstream/Marlin_v1' into lcd_wait_better
+
+# Please enter a commit message to explain why this merge is necessary,
+# especially if it merges an updated upstream into a topic branch.
+#
+# Lines starting with '#' will be ignored, and an empty message aborts
+# the commit.
+
+*** File '(Unnamed)'
+sort
+echo
+
+*** File '(Unnamed)'
+d7
+/drupal7
+3bl-justmeans-wp/editorial
+SLICER_HOME
+remindmeinbox
+&>
+8
+alchemist
+/Users/lordscott/Sites/git.loc
+goth
+
+*** File '(Unnamed)'
+mysql
+socket
+.sock
+error_repo
+zone
+ini_set
+localhost
+/Library/WebServer/Documents/gitprojects
+mydemoproject1
+alias
+
+*** File '(Unnamed)'
+/Users/lordscott/bin/clean
+thinkyhead.conf
+/etc/hosts
+thinkyhead.conf
+drupal7.conf
+thinkyhead.conf
+thinkyhead.conf
+thinkyhead.conf
+drupal7.conf
+thinkyhead.conf
+/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index eb2141a89..2702024e5 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -30,7 +30,6 @@
 // Serial port 0 is still used by the Arduino bootloader regardless of this setting.
 #define SERIAL_PORT 0
 
-// This determines the communication speed of the printer
 // This determines the communication speed of the printer
 #define BAUDRATE 250000
 
@@ -49,6 +48,7 @@
 // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
 // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
 // 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
+// 36 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
 // 4  = Duemilanove w/ ATMega328P pin assignment
 // 5  = Gen6
 // 51 = Gen6 deluxe
@@ -127,6 +127,7 @@
 // 10 is 100k RS thermistor 198-961 (4.7k pullup)
 // 11 is 100k beta 3950 1% thermistor (4.7k pullup)
 // 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+// 13 is 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" 
 // 20 is the PT100 circuit found in the Ultimainboard V2.x
 // 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
 //
@@ -192,7 +193,7 @@
                                   // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
   #define PID_INTEGRAL_DRIVE_MAX 255  //limit for the integral term
   #define K1 0.95 //smoothing factor within the PID
-  #define PID_dT ((OVERSAMPLENR * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
+  #define PID_dT ((OVERSAMPLENR * 10.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
 
 // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 // Ultimaker
@@ -765,6 +766,37 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
 //#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
 
+/**********************************************************************\
+ * Support for a filament diameter sensor
+ * Also allows adjustment of diameter at print time (vs  at slicing)
+ * Single extruder only at this point (extruder 0)
+ * 
+ * Motherboards
+ * 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector 
+ * 81 - Printrboard - Uses Analog input 2 on the Aux 2 connector
+ * 301 - Rambo  - uses Analog input 3
+ * Note may require analog pins to be defined for different motherboards
+ **********************************************************************/
+// Uncomment below to enable
+//#define FILAMENT_SENSOR
+
+#define FILAMENT_SENSOR_EXTRUDER_NUM	0  //The number of the extruder that has the filament sensor (0,1,2)
+#define MEASUREMENT_DELAY_CM			14  //measurement delay in cm.  This is the distance from filament sensor to middle of barrel
+
+#define DEFAULT_NOMINAL_FILAMENT_DIA  3.0  //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software.  Used for sensor reading validation
+#define MEASURED_UPPER_LIMIT          3.30  //upper limit factor used for sensor reading validation in mm
+#define MEASURED_LOWER_LIMIT          1.90  //lower limit factor for sensor reading validation in mm
+#define MAX_MEASUREMENT_DELAY			20  //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM  and lower number saves RAM)
+
+//defines used in the code
+#define DEFAULT_MEASURED_FILAMENT_DIA  DEFAULT_NOMINAL_FILAMENT_DIA  //set measured to nominal initially 
+
+
+
+
+
+
+
 #include "Configuration_adv.h"
 #include "thermistortables.h"
 
diff --git a/Marlin/ConfigurationStore.cpp b/Marlin/ConfigurationStore.cpp
index 7bbfede75..dbbe33a23 100644
--- a/Marlin/ConfigurationStore.cpp
+++ b/Marlin/ConfigurationStore.cpp
@@ -65,7 +65,7 @@ void Config_StoreSettings()
   EEPROM_WRITE_VAR(i,max_xy_jerk);
   EEPROM_WRITE_VAR(i,max_z_jerk);
   EEPROM_WRITE_VAR(i,max_e_jerk);
-  EEPROM_WRITE_VAR(i,add_homeing);
+  EEPROM_WRITE_VAR(i,add_homing);
   #ifdef DELTA
   EEPROM_WRITE_VAR(i,endstop_adj);
   EEPROM_WRITE_VAR(i,delta_radius);
@@ -170,9 +170,9 @@ SERIAL_ECHOLNPGM("Scaling factors:");
     SERIAL_ECHO_START;
     SERIAL_ECHOLNPGM("Home offset (mm):");
     SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M206 X",add_homeing[0] );
-    SERIAL_ECHOPAIR(" Y" ,add_homeing[1] );
-    SERIAL_ECHOPAIR(" Z" ,add_homeing[2] );
+    SERIAL_ECHOPAIR("  M206 X",add_homing[0] );
+    SERIAL_ECHOPAIR(" Y" ,add_homing[1] );
+    SERIAL_ECHOPAIR(" Z" ,add_homing[2] );
     SERIAL_ECHOLN("");
 #ifdef DELTA
     SERIAL_ECHO_START;
@@ -229,7 +229,7 @@ void Config_RetrieveSettings()
         EEPROM_READ_VAR(i,max_xy_jerk);
         EEPROM_READ_VAR(i,max_z_jerk);
         EEPROM_READ_VAR(i,max_e_jerk);
-        EEPROM_READ_VAR(i,add_homeing);
+        EEPROM_READ_VAR(i,add_homing);
         #ifdef DELTA
 		EEPROM_READ_VAR(i,endstop_adj);
 		EEPROM_READ_VAR(i,delta_radius);
@@ -303,7 +303,7 @@ void Config_ResetDefault()
     max_xy_jerk=DEFAULT_XYJERK;
     max_z_jerk=DEFAULT_ZJERK;
     max_e_jerk=DEFAULT_EJERK;
-    add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
+    add_homing[0] = add_homing[1] = add_homing[2] = 0;
 #ifdef DELTA
 	endstop_adj[0] = endstop_adj[1] = endstop_adj[2] = 0;
 	delta_radius= DELTA_RADIUS;
diff --git a/Marlin/DOGMbitmaps.h b/Marlin/DOGMbitmaps.h
index 984f421c0..d4b8659a0 100644
--- a/Marlin/DOGMbitmaps.h
+++ b/Marlin/DOGMbitmaps.h
@@ -68,54 +68,162 @@ const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0
 };
 
-#define STATUS_SCREENWIDTH 		115	//Width in pixels
-#define STATUS_SCREENHEIGHT 	19	//Height in pixels
-#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
-const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x47,0x0E,0x20,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4F,0x0F,0x20,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5F,0x0F,0xA0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5E,0x07,0xA0,
-0x7F,0x80,0x00,0x3F,0xC0,0x00,0x3F,0xC0,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
-0xFB,0xC0,0x00,0x79,0xE0,0x00,0x79,0xE0,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
-0xF3,0xC0,0x00,0x76,0xE0,0x00,0x76,0xE0,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
-0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x7E,0xE0,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
-0x7B,0x80,0x00,0x3D,0xC0,0x00,0x39,0xC0,0x00,0x82,0x08,0x00,0x5E,0x07,0xA0,
-0x7B,0x80,0x00,0x3B,0xC0,0x00,0x3E,0xC0,0x01,0x04,0x10,0x00,0x5F,0x0F,0xA0,
-0xFB,0xC0,0x00,0x77,0xE0,0x00,0x76,0xE0,0x01,0x04,0x10,0x00,0x4F,0x0F,0x20,
-0xFB,0xC0,0x00,0x70,0xE0,0x00,0x79,0xE0,0x00,0x82,0x08,0x00,0x47,0x0E,0x20,
-0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x7F,0xE0,0x00,0x41,0x04,0x00,0x63,0x0C,0x60,
-0x3F,0x00,0x00,0x1F,0x80,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
-0x1E,0x00,0x00,0x0F,0x00,0x00,0x0F,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
-0x0C,0x00,0x00,0x06,0x00,0x00,0x06,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
-};
+// Here comes a compile-time operation to match the extruder symbols 
+// on the info screen to the set number of extruders in configuration.h
+// 
+// When only one extruder is selected, the "1" on the symbol will not 
+// be displayed.
 
-#define STATUS_SCREENWIDTH 		115	//Width in pixels
-#define STATUS_SCREENHEIGHT 	19	//Height in pixels
-#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
-const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0xF8,0x20,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0xF0,0x20,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x60,0x20,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x01,0xA0,
-0x7F,0x80,0x00,0x3F,0xC0,0x00,0x3F,0xC0,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
-0xFB,0xC0,0x00,0x79,0xE0,0x00,0x79,0xE0,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
-0xF3,0xC0,0x00,0x76,0xE0,0x00,0x76,0xE0,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
-0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x7E,0xE0,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
-0x7B,0x80,0x00,0x3D,0xC0,0x00,0x39,0xC0,0x00,0x82,0x08,0x00,0x58,0x01,0xA0,
-0x7B,0x80,0x00,0x3B,0xC0,0x00,0x3E,0xC0,0x01,0x04,0x10,0x00,0x40,0x60,0x20,
-0xFB,0xC0,0x00,0x77,0xE0,0x00,0x76,0xE0,0x01,0x04,0x10,0x00,0x40,0xF0,0x20,
-0xFB,0xC0,0x00,0x70,0xE0,0x00,0x79,0xE0,0x00,0x82,0x08,0x00,0x41,0xF8,0x20,
-0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x7F,0xE0,0x00,0x41,0x04,0x00,0x61,0xF8,0x60,
-0x3F,0x00,0x00,0x1F,0x80,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
-0x1E,0x00,0x00,0x0F,0x00,0x00,0x0F,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
-0x0C,0x00,0x00,0x06,0x00,0x00,0x06,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
-};
+#if EXTRUDERS == 1
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x47,0x0E,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4F,0x0F,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5F,0x0F,0xA0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5E,0x07,0xA0,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x5E,0x07,0xA0,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x5F,0x0F,0xA0,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x4F,0x0F,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x47,0x0E,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x63,0x0C,0x60,
+	0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0xF8,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0xF0,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x60,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x01,0xA0,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x58,0x01,0xA0,
+	0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x40,0x60,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x40,0xF0,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x41,0xF8,0x20,
+	0xFF,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x61,0xF8,0x60,
+	0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+#elif EXTRUDERS == 2
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x47,0x0E,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4F,0x0F,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5F,0x0F,0xA0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5E,0x07,0xA0,
+	0x7F,0x80,0x00,0x3F,0xC0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0xFB,0xC0,0x00,0x79,0xE0,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xF3,0xC0,0x00,0x76,0xE0,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0x7B,0x80,0x00,0x3D,0xC0,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x5E,0x07,0xA0,
+	0x7B,0x80,0x00,0x3B,0xC0,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x5F,0x0F,0xA0,
+	0xFB,0xC0,0x00,0x77,0xE0,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x4F,0x0F,0x20,
+	0xFB,0xC0,0x00,0x70,0xE0,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x47,0x0E,0x20,
+	0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x63,0x0C,0x60,
+	0x3F,0x00,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0xF8,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0xF0,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x60,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x01,0xA0,
+	0x7F,0x80,0x00,0x3F,0xC0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0xFB,0xC0,0x00,0x79,0xE0,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xF3,0xC0,0x00,0x76,0xE0,0x00,0x00,0x00,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0x7B,0x80,0x00,0x3D,0xC0,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x58,0x01,0xA0,
+	0x7B,0x80,0x00,0x3B,0xC0,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x40,0x60,0x20,
+	0xFB,0xC0,0x00,0x77,0xE0,0x00,0x00,0x00,0x01,0x04,0x10,0x00,0x40,0xF0,0x20,
+	0xFB,0xC0,0x00,0x70,0xE0,0x00,0x00,0x00,0x00,0x82,0x08,0x00,0x41,0xF8,0x20,
+	0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x00,0x00,0x00,0x41,0x04,0x00,0x61,0xF8,0x60,
+	0x3F,0x00,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x0F,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+#else
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x0C,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x47,0x0E,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4F,0x0F,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5F,0x0F,0xA0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5E,0x07,0xA0,
+	0x7F,0x80,0x00,0x3F,0xC0,0x00,0x3F,0xC0,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0xFB,0xC0,0x00,0x79,0xE0,0x00,0x79,0xE0,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xF3,0xC0,0x00,0x76,0xE0,0x00,0x76,0xE0,0x00,0x20,0x82,0x00,0x40,0xF0,0x20,
+	0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x7E,0xE0,0x00,0x41,0x04,0x00,0x40,0x60,0x20,
+	0x7B,0x80,0x00,0x3D,0xC0,0x00,0x39,0xC0,0x00,0x82,0x08,0x00,0x5E,0x07,0xA0,
+	0x7B,0x80,0x00,0x3B,0xC0,0x00,0x3E,0xC0,0x01,0x04,0x10,0x00,0x5F,0x0F,0xA0,
+	0xFB,0xC0,0x00,0x77,0xE0,0x00,0x76,0xE0,0x01,0x04,0x10,0x00,0x4F,0x0F,0x20,
+	0xFB,0xC0,0x00,0x70,0xE0,0x00,0x79,0xE0,0x00,0x82,0x08,0x00,0x47,0x0E,0x20,
+	0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x7F,0xE0,0x00,0x41,0x04,0x00,0x63,0x0C,0x60,
+	0x3F,0x00,0x00,0x1F,0x80,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x0F,0x00,0x00,0x0F,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x06,0x00,0x00,0x06,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+
+	#define STATUS_SCREENWIDTH 		115	//Width in pixels
+	#define STATUS_SCREENHEIGHT 	19	//Height in pixels
+	#define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+	const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0xFF,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x61,0xF8,0x60,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0xF8,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0xF0,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x60,0x20,
+	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,0x01,0xA0,
+	0x7F,0x80,0x00,0x3F,0xC0,0x00,0x3F,0xC0,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0xFB,0xC0,0x00,0x79,0xE0,0x00,0x79,0xE0,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xF3,0xC0,0x00,0x76,0xE0,0x00,0x76,0xE0,0x00,0x20,0x82,0x00,0x5E,0xF7,0xA0,
+	0xEB,0xC0,0x00,0x7E,0xE0,0x00,0x7E,0xE0,0x00,0x41,0x04,0x00,0x5C,0x63,0xA0,
+	0x7B,0x80,0x00,0x3D,0xC0,0x00,0x39,0xC0,0x00,0x82,0x08,0x00,0x58,0x01,0xA0,
+	0x7B,0x80,0x00,0x3B,0xC0,0x00,0x3E,0xC0,0x01,0x04,0x10,0x00,0x40,0x60,0x20,
+	0xFB,0xC0,0x00,0x77,0xE0,0x00,0x76,0xE0,0x01,0x04,0x10,0x00,0x40,0xF0,0x20,
+	0xFB,0xC0,0x00,0x70,0xE0,0x00,0x79,0xE0,0x00,0x82,0x08,0x00,0x41,0xF8,0x20,
+	0xFF,0xC0,0x00,0x7F,0xE0,0x00,0x7F,0xE0,0x00,0x41,0x04,0x00,0x61,0xF8,0x60,
+	0x3F,0x00,0x00,0x1F,0x80,0x00,0x1F,0x80,0x00,0x00,0x00,0x00,0x70,0x00,0xE0,
+	0x1E,0x00,0x00,0x0F,0x00,0x00,0x0F,0x00,0x01,0xFF,0xFF,0x80,0x7F,0xFF,0xE0,
+	0x0C,0x00,0x00,0x06,0x00,0x00,0x06,0x00,0x01,0xFF,0xFF,0x80,0x00,0x00,0x00
+	};
+#endif // Extruders 
 
 
diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h
index 9e6ba2636..e271ddc8c 100644
--- a/Marlin/Marlin.h
+++ b/Marlin/Marlin.h
@@ -211,7 +211,7 @@ extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all
 extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
 extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
 extern float current_position[NUM_AXIS] ;
-extern float add_homeing[3];
+extern float add_homing[3];
 #ifdef DELTA
 extern float endstop_adj[3];
 extern float delta_radius;
@@ -236,6 +236,16 @@ extern int EtoPPressure;
 extern unsigned char fanSpeedSoftPwm;
 #endif
 
+#ifdef FILAMENT_SENSOR
+  extern float filament_width_nominal;  //holds the theoretical filament diameter ie., 3.00 or 1.75 
+  extern bool filament_sensor;  //indicates that filament sensor readings should control extrusion  
+  extern float filament_width_meas; //holds the filament diameter as accurately measured 
+  extern signed char measurement_delay[];  //ring buffer to delay measurement
+  extern int delay_index1, delay_index2;  //index into ring buffer
+  extern float delay_dist; //delay distance counter
+  extern int meas_delay_cm; //delay distance
+#endif
+
 #ifdef FWRETRACT
 extern bool autoretract_enabled;
 extern bool retracted[EXTRUDERS];
diff --git a/Marlin/MarlinSerial.cpp b/Marlin/MarlinSerial.cpp
index a7251dd6a..e4e737433 100644
--- a/Marlin/MarlinSerial.cpp
+++ b/Marlin/MarlinSerial.cpp
@@ -73,7 +73,7 @@ void MarlinSerial::begin(long baud)
   bool useU2X = true;
 
 #if F_CPU == 16000000UL && SERIAL_PORT == 0
-  // hard coded exception for compatibility with the bootloader shipped
+  // hard-coded exception for compatibility with the bootloader shipped
   // with the Duemilanove and previous boards and the firmware on the 8U2
   // on the Uno and Mega 2560.
   if (baud == 57600) {
diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index d5dbd6329..5e49b89a8 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -159,6 +159,10 @@
 // M400 - Finish all moves
 // M401 - Lower z-probe if present
 // M402 - Raise z-probe if present
+// M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
+// M405 - Turn on Filament Sensor extrusion control.  Optional D<delay in cm> to set delay in centimeters between sensor and extruder 
+// M406 - Turn off Filament Sensor extrusion control 
+// M407 - Displays measured filament diameter 
 // M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
@@ -220,7 +224,7 @@ float volumetric_multiplier[EXTRUDERS] = {1.0
   #endif
 };
 float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
-float add_homeing[3]={0,0,0};
+float add_homing[3]={0,0,0};
 #ifdef DELTA
 float endstop_adj[3]={0,0,0};
 #endif
@@ -313,12 +317,28 @@ float axis_scaling[3]={1,1,1};  // Build size scaling, default to 1
 
 bool cancel_heatup = false ;
 
+#ifdef FILAMENT_SENSOR
+  //Variables for Filament Sensor input 
+  float filament_width_nominal=DEFAULT_NOMINAL_FILAMENT_DIA;  //Set nominal filament width, can be changed with M404 
+  bool filament_sensor=false;  //M405 turns on filament_sensor control, M406 turns it off 
+  float filament_width_meas=DEFAULT_MEASURED_FILAMENT_DIA; //Stores the measured filament diameter 
+  signed char measurement_delay[MAX_MEASUREMENT_DELAY+1];  //ring buffer to delay measurement  store extruder factor after subtracting 100 
+  int delay_index1=0;  //index into ring buffer
+  int delay_index2=-1;  //index into ring buffer - set to -1 on startup to indicate ring buffer needs to be initialized
+  float delay_dist=0; //delay distance counter  
+  int meas_delay_cm = MEASUREMENT_DELAY_CM;  //distance delay setting
+#endif
+
 //===========================================================================
 //=============================Private Variables=============================
 //===========================================================================
 const char axis_codes[NUM_AXIS] = {'X', 'Y', 'Z', 'E'};
 static float destination[NUM_AXIS] = {  0.0, 0.0, 0.0, 0.0};
+
+#ifndef DELTA
 static float delta[3] = {0.0, 0.0, 0.0};
+#endif
+
 static float offset[3] = {0.0, 0.0, 0.0};
 static bool home_all_axis = true;
 static float feedrate = 1500.0, next_feedrate, saved_feedrate;
@@ -506,6 +526,7 @@ void servo_init()
   #endif
 }
 
+
 void setup()
 {
   setup_killpin();
@@ -555,6 +576,7 @@ void setup()
   st_init();    // Initialize stepper, this enables interrupts!
   setup_photpin();
   servo_init();
+  
 
   lcd_init();
   _delay_ms(1000);	// wait 1sec to display the splash screen
@@ -852,7 +874,7 @@ static int dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
 
 static float x_home_pos(int extruder) {
   if (extruder == 0)
-    return base_home_pos(X_AXIS) + add_homeing[X_AXIS];
+    return base_home_pos(X_AXIS) + add_homing[X_AXIS];
   else
     // In dual carriage mode the extruder offset provides an override of the
     // second X-carriage offset when homed - otherwise X2_HOME_POS is used.
@@ -884,9 +906,9 @@ static void axis_is_at_home(int axis) {
       return;
     }
     else if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && active_extruder == 0) {
-      current_position[X_AXIS] = base_home_pos(X_AXIS) + add_homeing[X_AXIS];
-      min_pos[X_AXIS] =          base_min_pos(X_AXIS) + add_homeing[X_AXIS];
-      max_pos[X_AXIS] =          min(base_max_pos(X_AXIS) + add_homeing[X_AXIS],
+      current_position[X_AXIS] = base_home_pos(X_AXIS) + add_homing[X_AXIS];
+      min_pos[X_AXIS] =          base_min_pos(X_AXIS) + add_homing[X_AXIS];
+      max_pos[X_AXIS] =          min(base_max_pos(X_AXIS) + add_homing[X_AXIS],
                                   max(extruder_offset[X_AXIS][1], X2_MAX_POS) - duplicate_extruder_x_offset);
       return;
     }
@@ -914,11 +936,11 @@ static void axis_is_at_home(int axis) {
      
      for (i=0; i<2; i++)
      {
-        delta[i] -= add_homeing[i];
+        delta[i] -= add_homing[i];
      } 
      
-    // SERIAL_ECHOPGM("addhome X="); SERIAL_ECHO(add_homeing[X_AXIS]);
-	// SERIAL_ECHOPGM(" addhome Y="); SERIAL_ECHO(add_homeing[Y_AXIS]);
+    // SERIAL_ECHOPGM("addhome X="); SERIAL_ECHO(add_homing[X_AXIS]);
+	// SERIAL_ECHOPGM(" addhome Y="); SERIAL_ECHO(add_homing[Y_AXIS]);
     // SERIAL_ECHOPGM(" addhome Theta="); SERIAL_ECHO(delta[X_AXIS]);
     // SERIAL_ECHOPGM(" addhome Psi+Theta="); SERIAL_ECHOLN(delta[Y_AXIS]);
       
@@ -936,14 +958,14 @@ static void axis_is_at_home(int axis) {
    } 
    else
    {
-      current_position[axis] = base_home_pos(axis) + add_homeing[axis];
-      min_pos[axis] =          base_min_pos(axis) + add_homeing[axis];
-      max_pos[axis] =          base_max_pos(axis) + add_homeing[axis];
+      current_position[axis] = base_home_pos(axis) + add_homing[axis];
+      min_pos[axis] =          base_min_pos(axis) + add_homing[axis];
+      max_pos[axis] =          base_max_pos(axis) + add_homing[axis];
    }
 #else
-  current_position[axis] = base_home_pos(axis) + add_homeing[axis];
-  min_pos[axis] =          base_min_pos(axis) + add_homeing[axis];
-  max_pos[axis] =          base_max_pos(axis) + add_homeing[axis];
+  current_position[axis] = base_home_pos(axis) + add_homing[axis];
+  min_pos[axis] =          base_min_pos(axis) + add_homing[axis];
+  max_pos[axis] =          base_max_pos(axis) + add_homing[axis];
 #endif
 }
 
@@ -1431,8 +1453,8 @@ void process_commands()
           HOMEAXIS(Z);
 
           calculate_delta(current_position);
-          plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);		  
-		  
+          plan_set_position(delta[X_AXIS], delta[Y_AXIS], delta[Z_AXIS], current_position[E_AXIS]);
+
 #else // NOT DELTA
 
       home_all_axis = !((code_seen(axis_codes[X_AXIS])) || (code_seen(axis_codes[Y_AXIS])) || (code_seen(axis_codes[Z_AXIS])));
@@ -1515,7 +1537,7 @@ void process_commands()
 		#ifdef SCARA
 		   current_position[X_AXIS]=code_value();
 		#else
-		   current_position[X_AXIS]=code_value()+add_homeing[0];
+		   current_position[X_AXIS]=code_value()+add_homing[0];
 		#endif
         }
       }
@@ -1525,7 +1547,7 @@ void process_commands()
          #ifdef SCARA
 		   current_position[Y_AXIS]=code_value();
 		#else
-		   current_position[Y_AXIS]=code_value()+add_homeing[1];
+		   current_position[Y_AXIS]=code_value()+add_homing[1];
 		#endif
         }
       }
@@ -1590,7 +1612,7 @@ void process_commands()
 
       if(code_seen(axis_codes[Z_AXIS])) {
         if(code_value_long() != 0) {
-          current_position[Z_AXIS]=code_value()+add_homeing[2];
+          current_position[Z_AXIS]=code_value()+add_homing[2];
         }
       }
       #ifdef ENABLE_AUTO_BED_LEVELING
@@ -1819,10 +1841,10 @@ void process_commands()
                 	current_position[i] = code_value();  
 		}
 		else {
-                current_position[i] = code_value()+add_homeing[i];  
+                current_position[i] = code_value()+add_homing[i];  
             	}  
 #else
-		current_position[i] = code_value()+add_homeing[i];
+		current_position[i] = code_value()+add_homing[i];
 #endif
             plan_set_position(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]);
            }
@@ -2721,9 +2743,9 @@ Sigma_Exit:
       SERIAL_PROTOCOLLN("");
       
       SERIAL_PROTOCOLPGM("SCARA Cal - Theta:");
-      SERIAL_PROTOCOL(delta[X_AXIS]+add_homeing[0]);
+      SERIAL_PROTOCOL(delta[X_AXIS]+add_homing[0]);
       SERIAL_PROTOCOLPGM("   Psi+Theta (90):");
-      SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+add_homeing[1]);
+      SERIAL_PROTOCOL(delta[Y_AXIS]-delta[X_AXIS]-90+add_homing[1]);
       SERIAL_PROTOCOLLN("");
       
       SERIAL_PROTOCOLPGM("SCARA step Cal - Theta:");
@@ -2797,6 +2819,8 @@ Sigma_Exit:
         } else {
           //reserved for setting filament diameter via UFID or filament measuring device
           break;
+        
+          
         }
         tmp_extruder = active_extruder;
         if(code_seen('T')) {
@@ -2849,19 +2873,19 @@ Sigma_Exit:
       if(code_seen('E')) max_e_jerk = code_value() ;
     }
     break;
-    case 206: // M206 additional homeing offset
+    case 206: // M206 additional homing offset
       for(int8_t i=0; i < 3; i++)
       {
-        if(code_seen(axis_codes[i])) add_homeing[i] = code_value();
+        if(code_seen(axis_codes[i])) add_homing[i] = code_value();
       }
 	  #ifdef SCARA
 	   if(code_seen('T'))       // Theta
       {
-        add_homeing[0] = code_value() ;
+        add_homing[0] = code_value() ;
       }
       if(code_seen('P'))       // Psi
       {
-        add_homeing[1] = code_value() ;
+        add_homing[1] = code_value() ;
       }
 	  #endif
       break;
@@ -3359,6 +3383,70 @@ Sigma_Exit:
     }
     break;
 #endif
+
+#ifdef FILAMENT_SENSOR
+case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or display nominal filament width 
+    {
+    #if (FILWIDTH_PIN > -1) 
+    if(code_seen('N')) filament_width_nominal=code_value();
+    else{
+    SERIAL_PROTOCOLPGM("Filament dia (nominal mm):"); 
+    SERIAL_PROTOCOLLN(filament_width_nominal); 
+    }
+    #endif
+    }
+    break; 
+    
+    case 405:  //M405 Turn on filament sensor for control 
+    {
+    
+    
+    if(code_seen('D')) meas_delay_cm=code_value();
+       
+       if(meas_delay_cm> MAX_MEASUREMENT_DELAY)
+       	meas_delay_cm = MAX_MEASUREMENT_DELAY;
+    
+       if(delay_index2 == -1)  //initialize the ring buffer if it has not been done since startup
+    	   {
+    	   int temp_ratio = widthFil_to_size_ratio(); 
+       	    
+       	    for (delay_index1=0; delay_index1<(MAX_MEASUREMENT_DELAY+1); ++delay_index1 ){
+       	              measurement_delay[delay_index1]=temp_ratio-100;  //subtract 100 to scale within a signed byte
+       	        }
+       	    delay_index1=0;
+       	    delay_index2=0;	
+    	   }
+    
+    filament_sensor = true ; 
+    
+    //SERIAL_PROTOCOLPGM("Filament dia (measured mm):"); 
+    //SERIAL_PROTOCOL(filament_width_meas); 
+    //SERIAL_PROTOCOLPGM("Extrusion ratio(%):"); 
+    //SERIAL_PROTOCOL(extrudemultiply); 
+    } 
+    break; 
+    
+    case 406:  //M406 Turn off filament sensor for control 
+    {      
+    filament_sensor = false ; 
+    } 
+    break; 
+  
+    case 407:   //M407 Display measured filament diameter 
+    { 
+     
+    
+    
+    SERIAL_PROTOCOLPGM("Filament dia (measured mm):"); 
+    SERIAL_PROTOCOLLN(filament_width_meas);   
+    } 
+    break; 
+    #endif
+    
+
+
+
+
     case 500: // M500 Store settings in EEPROM
     {
         Config_StoreSettings();
diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h
index 8d450cb37..d0570c99c 100644
--- a/Marlin/dogm_lcd_implementation.h
+++ b/Marlin/dogm_lcd_implementation.h
@@ -245,9 +245,6 @@ static void lcd_implementation_status_screen()
 		 u8g.drawBox(38,17,2,2);
 		 u8g.setColorIndex(1);	// black on white
 		}
- #else
- u8g.setPrintPos(31,27);
- u8g.print("---");
  #endif
  
  // Extruder 3
@@ -266,9 +263,6 @@ static void lcd_implementation_status_screen()
 		 u8g.drawBox(62,17,2,2);
 		 u8g.setColorIndex(1);	// black on white
 		}
- #else
- u8g.setPrintPos(55,27);
- u8g.print("---");
  #endif
  
  // Heatbed
diff --git a/Marlin/example_configurations/delta/Configuration.h b/Marlin/example_configurations/delta/Configuration.h
index c724484bd..042b221c3 100644
--- a/Marlin/example_configurations/delta/Configuration.h
+++ b/Marlin/example_configurations/delta/Configuration.h
@@ -8,7 +8,7 @@
 //===========================================================================
 //============================= DELTA Printer ===============================
 //===========================================================================
-// For a Delta printer rplace the configuration files wilth the files in the
+// For a Delta printer replace the configuration files with the files in the
 // example_configurations/delta directory.
 //
 
@@ -41,6 +41,7 @@
 // 33 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Bed)
 // 34 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Bed)
 // 35 = RAMPS 1.3 / 1.4 (Power outputs: Extruder, Fan, Fan)
+// 36 = RAMPS 1.3 / 1.4 (Power outputs: Extruder0, Extruder1, Fan)
 // 4  = Duemilanove w/ ATMega328P pin assignment
 // 5  = Gen6
 // 51 = Gen6 deluxe
@@ -54,20 +55,24 @@
 // 68 = Azteeg X3 Pro
 // 7  = Ultimaker
 // 71 = Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+// 72 = Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 // 77 = 3Drag Controller
 // 8  = Teensylu
 // 80 = Rumba
 // 81 = Printrboard (AT90USB1286)
 // 82 = Brainwave (AT90USB646)
 // 83 = SAV Mk-I (AT90USB1286)
+// 84 = Teensy++2.0 (AT90USB1286) // CLI compile: DEFINES=AT90USBxx_TEENSYPP_ASSIGNMENTS HARDWARE_MOTHERBOARD=84  make
 // 9  = Gen3+
 // 70 = Megatronics
 // 701= Megatronics v2.0
 // 702= Minitronics v1.0
 // 90 = Alpha OMCA board
 // 91 = Final OMCA board
-// 301 = Rambo
+// 301= Rambo
 // 21 = Elefu Ra Board (v3)
+// 88 = 5DPrint D8 Driver Board
+// 999 = Leapfrog
 
 #ifndef MOTHERBOARD
 #define MOTHERBOARD 33
@@ -89,7 +94,7 @@
 
 #define POWER_SUPPLY 1
 
-// Define this to have the electronics keep the powersupply off on startup. If you don't know what this is leave it.
+// Define this to have the electronics keep the power supply off on startup. If you don't know what this is leave it.
 // #define PS_DEFAULT_OFF
 
 //===========================================================================
@@ -103,7 +108,7 @@
 // and processor overload (too many expensive sqrt calls).
 #define DELTA_SEGMENTS_PER_SECOND 200
 
-// NOTE NB all values for DELTA_* values MOUST be floating point, so always have a decimal point in them
+// NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them
 
 // Center-to-center distance of the holes in the diagonal push rods.
 #define DELTA_DIAGONAL_ROD 250.0 // mm
@@ -132,7 +137,7 @@
 // 0 is not used
 // 1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
 // 2 is 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
-// 3 is mendel-parts thermistor (4.7k pullup)
+// 3 is Mendel-parts thermistor (4.7k pullup)
 // 4 is 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
 // 5 is 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
 // 6 is 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
@@ -141,13 +146,22 @@
 // 8 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
 // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
 // 10 is 100k RS thermistor 198-961 (4.7k pullup)
-// 60 is 100k Maker's Tool Works Kapton Bed Thermister
+// 11 is 100k beta 3950 1% thermistor (4.7k pullup)
+// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+// 13 is 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" 
+// 20 is the PT100 circuit found in the Ultimainboard V2.x
+// 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
 //
 //    1k ohm pullup tables - This is not normal, you would have to have changed out your 4.7k for 1k
 //                          (but gives greater accuracy and more stable PID)
 // 51 is 100k thermistor - EPCOS (1k pullup)
 // 52 is 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
 // 55 is 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+//
+// 1047 is Pt1000 with 4k7 pullup
+// 1010 is Pt1000 with 1k pullup (non standard)
+// 147 is Pt100 with 4k7 pullup
+// 110 is Pt100 with 1k pullup (non standard)
 
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1
@@ -184,6 +198,10 @@
 // HEATER_BED_DUTY_CYCLE_DIVIDER intervals.
 //#define HEATER_BED_DUTY_CYCLE_DIVIDER 4
 
+// If you want the M105 heater power reported in watts, define the BED_WATTS, and (shared for all extruders) EXTRUDER_WATTS
+//#define EXTRUDER_WATTS (12.0*12.0/6.7) //  P=I^2/R
+//#define BED_WATTS (12.0*12.0/1.1)      // P=I^2/R
+
 // PID settings:
 // Comment the following line to disable PID and enable bang-bang.
 #define PIDTEMP
@@ -196,15 +214,15 @@
                                   // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
   #define PID_INTEGRAL_DRIVE_MAX 255  //limit for the integral term
   #define K1 0.95 //smoothing factor within the PID
-  #define PID_dT ((16.0 * 8.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
+  #define PID_dT ((OVERSAMPLENR * 10.0)/(F_CPU / 64.0 / 256.0)) //sampling period of the temperature routine
 
-// If you are using a preconfigured hotend then you can use one of the value sets by uncommenting it
+// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 // Ultimaker
     #define  DEFAULT_Kp 22.2
     #define  DEFAULT_Ki 1.08
     #define  DEFAULT_Kd 114
 
-// Makergear
+// MakerGear
 //    #define  DEFAULT_Kp 7.0
 //    #define  DEFAULT_Ki 0.1
 //    #define  DEFAULT_Kd 12
@@ -262,6 +280,44 @@
 #define EXTRUDE_MINTEMP 170
 #define EXTRUDE_MAXLENGTH (X_MAX_LENGTH+Y_MAX_LENGTH) //prevent extrusion of very large distances.
 
+/*================== Thermal Runaway Protection ==============================
+This is a feature to protect your printer from burn up in flames if it has
+a thermistor coming off place (this happened to a friend of mine recently and
+motivated me writing this feature).
+
+The issue: If a thermistor come off, it will read a lower temperature than actual.
+The system will turn the heater on forever, burning up the filament and anything
+else around.
+
+After the temperature reaches the target for the first time, this feature will 
+start measuring for how long the current temperature stays below the target 
+minus _HYSTERESIS (set_temperature - THERMAL_RUNAWAY_PROTECTION_HYSTERESIS).
+
+If it stays longer than _PERIOD, it means the thermistor temperature
+cannot catch up with the target, so something *may be* wrong. Then, to be on the
+safe side, the system will he halt.
+
+Bear in mind the count down will just start AFTER the first time the 
+thermistor temperature is over the target, so you will have no problem if
+your extruder heater takes 2 minutes to hit the target on heating.
+
+*/
+// If you want to enable this feature for all your extruder heaters,
+// uncomment the 2 defines below:
+
+// Parameters for all extruder heaters
+//#define THERMAL_RUNAWAY_PROTECTION_PERIOD 40 //in seconds
+//#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS 4 // in degree Celsius
+
+// If you want to enable this feature for your bed heater,
+// uncomment the 2 defines below:
+
+// Parameters for the bed heater
+//#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD 20 //in seconds
+//#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS 2 // in degree Celsius
+//===========================================================================
+
+
 //===========================================================================
 //=============================Mechanical Settings===========================
 //===========================================================================
@@ -273,7 +329,7 @@
 #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
 
 #ifndef ENDSTOPPULLUPS
-  // fine Enstop settings: Individual Pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
   // #define ENDSTOPPULLUP_XMAX
   // #define ENDSTOPPULLUP_YMAX
   // #define ENDSTOPPULLUP_ZMAX
@@ -317,6 +373,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #define DISABLE_Y false
 #define DISABLE_Z false
 #define DISABLE_E false // For all extruders
+#define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled
 
 #define INVERT_X_DIR false // DELTA does not invert
 #define INVERT_Y_DIR false
@@ -350,16 +407,55 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //============================= Bed Auto Leveling ===========================
 
 //#define ENABLE_AUTO_BED_LEVELING // Delete the comment to enable (remove // at the start of the line)
+#define Z_PROBE_REPEATABILITY_TEST  // If not commented out, Z-Probe Repeatability test will be included if Auto Bed Leveling is Enabled.
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
-  // these are the positions on the bed to do the probing
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define BACK_PROBE_BED_POSITION 180
-  #define FRONT_PROBE_BED_POSITION 20
+// There are 2 different ways to pick the X and Y locations to probe:
+
+//  - "grid" mode
+//    Probe every point in a rectangular grid
+//    You must specify the rectangle, and the density of sample points
+//    This mode is preferred because there are more measurements.
+//    It used to be called ACCURATE_BED_LEVELING but "grid" is more descriptive
+
+//  - "3-point" mode
+//    Probe 3 arbitrary points on the bed (that aren't colinear)
+//    You must specify the X & Y coordinates of all 3 points
+
+  #define AUTO_BED_LEVELING_GRID
+  // with AUTO_BED_LEVELING_GRID, the bed is sampled in a
+  // AUTO_BED_LEVELING_GRID_POINTSxAUTO_BED_LEVELING_GRID_POINTS grid
+  // and least squares solution is calculated
+  // Note: this feature occupies 10'206 byte
+  #ifdef AUTO_BED_LEVELING_GRID
+
+    // set the rectangle in which to probe
+    #define LEFT_PROBE_BED_POSITION 15
+    #define RIGHT_PROBE_BED_POSITION 170
+    #define BACK_PROBE_BED_POSITION 180
+    #define FRONT_PROBE_BED_POSITION 20
+
+     // set the number of grid points per dimension
+     // I wouldn't see a reason to go above 3 (=9 probing points on the bed)
+    #define AUTO_BED_LEVELING_GRID_POINTS 2
+
+
+  #else  // not AUTO_BED_LEVELING_GRID
+    // with no grid, just probe 3 arbitrary points.  A simple cross-product
+    // is used to esimate the plane of the print bed
+
+      #define ABL_PROBE_PT_1_X 15
+      #define ABL_PROBE_PT_1_Y 180
+      #define ABL_PROBE_PT_2_X 15
+      #define ABL_PROBE_PT_2_Y 20
+      #define ABL_PROBE_PT_3_X 170
+      #define ABL_PROBE_PT_3_Y 20
+
+  #endif // AUTO_BED_LEVELING_GRID
 
-  // these are the offsets to the prob relative to the extruder tip (Hotend - Probe)
+
+  // these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25
   #define Y_PROBE_OFFSET_FROM_EXTRUDER -29
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
@@ -372,6 +468,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
   #define Z_RAISE_BEFORE_PROBING 15    //How much the extruder will be raised before traveling to the first probing point.
   #define Z_RAISE_BETWEEN_PROBINGS 5  //How much the extruder will be raised when traveling from between next probing points
 
+  //#define Z_PROBE_SLED // turn on if you have a z-probe mounted on a sled like those designed by Charles Bell
+  //#define SLED_DOCKING_OFFSET 5 // the extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
 
   //If defined, the Probe servo will be turned on only during movement and then turned off to avoid jerk
   //The value is the delay to turn the servo off after powered on - depends on the servo speed; 300ms is good value, but you can try lower it.
@@ -380,7 +478,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //  #define PROBE_SERVO_DEACTIVATION_DELAY 300
 
 
-//If you have enabled the Bed Auto Levelling and are using the same Z Probe for Z Homing,
+//If you have enabled the Bed Auto Leveling and are using the same Z Probe for Z Homing,
 //it is highly recommended you let this Z_SAFE_HOMING enabled!!!
 
   #define Z_SAFE_HOMING   // This feature is meant to avoid Z homing with probe outside the bed area.
@@ -397,7 +495,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
   #endif
 
-#endif
+#endif // ENABLE_AUTO_BED_LEVELING
 
 
 // The position of the homing switches
@@ -407,7 +505,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //Manual homing switch locations:
 
 #define MANUAL_HOME_POSITIONS  // MANUAL_*_HOME_POS below will be used
-// For deltabots this means top and center of the cartesian print volume.
+// For deltabots this means top and center of the Cartesian print volume.
 #define MANUAL_X_HOME_POS 0
 #define MANUAL_Y_HOME_POS 0
 #define MANUAL_Z_HOME_POS 250 // For delta: Distance between nozzle and print surface after homing.
@@ -442,12 +540,21 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //=============================Additional Features===========================
 //===========================================================================
 
+// Custom M code points
+#define CUSTOM_M_CODES
+#ifdef CUSTOM_M_CODES
+  #define CUSTOM_M_CODE_SET_Z_PROBE_OFFSET 851
+  #define Z_PROBE_OFFSET_RANGE_MIN -15
+  #define Z_PROBE_OFFSET_RANGE_MAX -5
+#endif
+
+
 // EEPROM
-// the microcontroller can store settings in the EEPROM, e.g. max velocity...
-// M500 - stores paramters in EEPROM
+// The microcontroller can store settings in the EEPROM, e.g. max velocity...
+// M500 - stores parameters in EEPROM
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-//define this to enable eeprom support
+//define this to enable EEPROM support
 //#define EEPROM_SETTINGS
 //to disable EEPROM Serial responses and decrease program space by ~1700 byte: comment this out:
 // please keep turned on if you can.
@@ -463,14 +570,17 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
 //LCD and SD support
-//#define ULTRA_LCD  //general lcd support, also 16x2
+//#define ULTRA_LCD  //general LCD support, also 16x2
 //#define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
 //#define SDSUPPORT // Enable SD Card Support in Hardware Console
 //#define SDSLOW // Use slower SD transfer mode (not normally needed - uncomment if you're getting volume init error)
+//#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
 //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
 //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
-//#define ULTIMAKERCONTROLLER //as available from the ultimaker online store.
-//#define ULTIPANEL  //the ultipanel as on thingiverse
+//#define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
+//#define ULTIPANEL  //the UltiPanel as on Thingiverse
+//#define LCD_FEEDBACK_FREQUENCY_HZ 1000	// this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click
 
 // The MaKr3d Makr-Panel with graphic controller and SD support
 // http://reprap.org/wiki/MaKr3d_MaKrPanel
@@ -556,6 +666,21 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
   #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
   #define NEWPANEL
   #define ULTIPANEL
+
+  #ifndef ENCODER_PULSES_PER_STEP
+	#define ENCODER_PULSES_PER_STEP 4
+  #endif
+
+  #ifndef ENCODER_STEPS_PER_MENU_ITEM
+	#define ENCODER_STEPS_PER_MENU_ITEM 1
+  #endif
+
+
+  #ifdef LCD_USE_I2C_BUZZER
+	#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+	#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
+  #endif
+
 #endif
 
 // Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
@@ -578,7 +703,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
 //#define SR_LCD
 #ifdef SR_LCD
-   #define SR_LCD_2W_NL    // Non latching 2 wire shiftregister
+   #define SR_LCD_2W_NL    // Non latching 2 wire shift register
    //#define NEWPANEL
 #endif
 
@@ -594,7 +719,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
     #define LCD_WIDTH 20
     #define LCD_HEIGHT 4
   #endif
-#else //no panel but just lcd
+#else //no panel but just LCD
   #ifdef ULTRA_LCD
   #ifdef DOGLCD // Change number of lines to match the 128x64 graphics display
     #define LCD_WIDTH 20
@@ -616,8 +741,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Increase the FAN pwm frequency. Removes the PWM noise but increases heating in the FET/Arduino
 //#define FAST_PWM_FAN
 
-// Temperature status leds that display the hotend and bet temperature.
-// If alle hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
+// Temperature status LEDs that display the hotend and bet temperature.
+// If all hotends and bed temperature and temperature setpoint are < 54C then the BLUE led is on.
 // Otherwise the RED led is on. There is 1C hysteresis.
 //#define TEMP_STAT_LEDS
 
@@ -667,6 +792,35 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
 //#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 70,0} // X,Y,Z Axis Extend and Retract angles
 
+/**********************************************************************\
+ * Support for a filament diameter sensor
+ * Also allows adjustment of diameter at print time (vs  at slicing)
+ * Single extruder only at this point (extruder 0)
+ * 
+ * Motherboards
+ * 34 - RAMPS1.4 - uses Analog input 5 on the AUX2 connector 
+ * 81 - Printrboard - Uses Analog input 2 on the Aux 2 connector
+ * 301 - Rambo  - uses Analog input 3
+ * Note may require analog pins to be defined for different motherboards
+ **********************************************************************/
+#define FILAMENT_SENSOR
+#define FILAMENT_SENSOR_EXTRUDER_NUM	0  //The number of the extruder that has the filament sensor (0,1,2)
+#define MEASUREMENT_DELAY_CM			14  //measurement delay in cm.  This is the distance from filament sensor to middle of barrel
+
+#define DEFAULT_NOMINAL_FILAMENT_DIA  3.0  //Enter the diameter (in mm) of the filament generally used (3.0 mm or 1.75 mm) - this is then used in the slicer software.  Used for sensor reading validation
+#define MEASURED_UPPER_LIMIT          3.30  //upper limit factor used for sensor reading validation in mm
+#define MEASURED_LOWER_LIMIT          1.90  //lower limit factor for sensor reading validation in mm
+#define MAX_MEASUREMENT_DELAY			20  //delay buffer size in bytes (1 byte = 1cm)- limits maximum measurement delay allowable (must be larger than MEASUREMENT_DELAY_CM  and lower number saves RAM)
+
+//defines used in the code
+#define DEFAULT_MEASURED_FILAMENT_DIA  DEFAULT_NOMINAL_FILAMENT_DIA  //set measured to nominal initially 
+
+
+
+
+
+
+
 #include "Configuration_adv.h"
 #include "thermistortables.h"
 
diff --git a/Marlin/example_configurations/delta/Configuration_adv.h b/Marlin/example_configurations/delta/Configuration_adv.h
index 4d6e78b4d..ee42481be 100644
--- a/Marlin/example_configurations/delta/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/Configuration_adv.h
@@ -281,6 +281,9 @@
 //=============================Additional Features===========================
 //===========================================================================
 
+//#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
+
 #define SD_FINISHED_STEPPERRELEASE true  //if sd support and the file is finished: disable steppers?
 #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
 
@@ -401,8 +404,16 @@ const unsigned int dropsegments=5; //everything with less than this number of st
 // the moves are than replaced by the firmware controlled ones.
 
 // #define FWRETRACT  //ONLY PARTIALLY TESTED
-#define MIN_RETRACT 0.1 //minimum extruded mm to accept a automatic gcode retraction attempt
-
+#ifdef FWRETRACT
+  #define MIN_RETRACT 0.1                //minimum extruded mm to accept a automatic gcode retraction attempt
+  #define RETRACT_LENGTH 3               //default retract length (positive mm)
+  #define RETRACT_LENGTH_SWAP 13         //default swap retract length (positive mm), for extruder change
+  #define RETRACT_FEEDRATE 45            //default feedrate for retracting (mm/s)
+  #define RETRACT_ZLIFT 0                //default retract Z-lift
+  #define RETRACT_RECOVER_LENGTH 0       //default additional recover length (mm, added to retract length when recovering)
+  #define RETRACT_RECOVER_LENGTH_SWAP 0  //default additional swap recover length (mm, added to retract length when recovering from extruder change)
+  #define RETRACT_RECOVER_FEEDRATE 8     //default feedrate for recovering from retraction (mm/s)
+#endif
 
 //adds support for experimental filament exchange support M600; requires display
 #ifdef ULTIPANEL
diff --git a/Marlin/language.h b/Marlin/language.h
index 54ca5bc62..ee5d77dbc 100644
--- a/Marlin/language.h
+++ b/Marlin/language.h
@@ -155,6 +155,7 @@
 	#define MSG_AUTOSTART "Autostart"
 	#define MSG_DISABLE_STEPPERS "Disable steppers"
 	#define MSG_AUTO_HOME "Auto home"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Set origin"
 	#define MSG_PREHEAT_PLA "Preheat PLA"
 	#define MSG_PREHEAT_PLA0 "Preheat PLA 1"
@@ -279,6 +280,7 @@
 	#define MSG_AUTOSTART "Autostart"
 	#define MSG_DISABLE_STEPPERS "Wylacz silniki"
 	#define MSG_AUTO_HOME "Auto. poz. zerowa"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Ustaw punkt zero"
 	#define MSG_PREHEAT_PLA "Rozgrzej PLA"
 	#define MSG_PREHEAT_PLA0 "Rozgrzej PLA 1"
@@ -406,10 +408,11 @@
 	#define MSG_AUTOSTART "Demarrage auto"
 	#define MSG_DISABLE_STEPPERS "Arreter moteurs"
 	#define MSG_AUTO_HOME "Home auto."
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Regler origine"
 	#define MSG_PREHEAT_PLA " Prechauffage PLA"
 	#define MSG_PREHEAT_PLA0 "Prechauff. PLA 1"
-        #define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
+    #define MSG_PREHEAT_PLA1 "Prechauff. PLA 2"
 	#define MSG_PREHEAT_PLA2 "Prechauff. PLA 3"
 	#define MSG_PREHEAT_PLA012 "Prech. PLA Tout"
 	#define MSG_PREHEAT_PLA_BEDONLY "Prech. PLA Plateau"
@@ -534,6 +537,7 @@
 	#define MSG_AUTOSTART        "Autostart"
 	#define MSG_DISABLE_STEPPERS "Stepper abschalt."
 	#define MSG_AUTO_HOME        "Auto Nullpunkt"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN       "Setze Nullpunkt"
 	#define MSG_PREHEAT_PLA      "Vorwärmen PLA"
 	#define MSG_PREHEAT_PLA0     "Vorwärmen PLA 1"
@@ -661,6 +665,7 @@
 	#define MSG_AUTOSTART " Autostart"
 	#define MSG_DISABLE_STEPPERS "Apagar motores"
 	#define MSG_AUTO_HOME "Llevar al origen"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Establecer cero"
 	#define MSG_PREHEAT_PLA "Precalentar PLA"
 	#define MSG_PREHEAT_PLA0 "Precalentar PLA 1"
@@ -794,6 +799,7 @@
 	#define MSG_AUTOSTART						"Автостарт"
 	#define MSG_DISABLE_STEPPERS 				"Выкл. двигатели"
 	#define MSG_AUTO_HOME						"Парковка"
+	#define MSG_SET_HOME_OFFSETS				"Set home offsets"
 	#define MSG_SET_ORIGIN						"Запомнить ноль"
 	#define MSG_PREHEAT_PLA 					"Преднагрев PLA"
 	#define MSG_PREHEAT_PLA0					"Преднагрев PLA0"
@@ -885,11 +891,11 @@
 	#define MSG_KILLED							"УБИТО."
 	#define MSG_STOPPED							"ОСТАНОВЛЕНО."
 	#define MSG_CONTROL_RETRACT					"Откат mm:"
-	#define MSG_CONTROL_RETRACT_SWAP				"своп Откат mm:"
+	#define MSG_CONTROL_RETRACT_SWAP			"своп Откат mm:"
 	#define MSG_CONTROL_RETRACTF				"Откат  V:"
 	#define MSG_CONTROL_RETRACT_ZLIFT			"Прыжок mm:"
 	#define MSG_CONTROL_RETRACT_RECOVER			"Возврат +mm:"
-	#define MSG_CONTROL_RETRACT_RECOVER_SWAP		"своп Возврат +mm:"
+	#define MSG_CONTROL_RETRACT_RECOVER_SWAP	"своп Возврат +mm:"
 	#define MSG_CONTROL_RETRACT_RECOVERF		"Возврат  V:"
 	#define MSG_AUTORETRACT						"АвтоОткат:"
 	#define MSG_FILAMENTCHANGE 					"Change filament"
@@ -919,6 +925,7 @@
 	#define MSG_AUTOSTART            "Autostart"
 	#define MSG_DISABLE_STEPPERS     "Disabilita Motori"
 	#define MSG_AUTO_HOME            "Auto Home"
+	#define MSG_SET_HOME_OFFSETS     "Set home offsets"
 	#define MSG_SET_ORIGIN           "Imposta Origine"
 	#define MSG_PREHEAT_PLA          "Preriscalda PLA"
 	#define MSG_PREHEAT_PLA0         "Preriscalda PLA 1"
@@ -1044,6 +1051,7 @@
 	#define MSG_AUTOSTART "Autostart"
 	#define MSG_DISABLE_STEPPERS " Apagar motores"
 	#define MSG_AUTO_HOME "Ir para origen"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Estabelecer orig."
 	#define MSG_PREHEAT_PLA "Pre-aquecer PLA"
 	#define MSG_PREHEAT_PLA0 " pre-aquecer PLA 1"
@@ -1176,6 +1184,7 @@
 	#define MSG_AUTOSTART "Automaatti"
 	#define MSG_DISABLE_STEPPERS "Vapauta moottorit"
 	#define MSG_AUTO_HOME "Aja referenssiin"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Aseta origo"
 	#define MSG_PREHEAT_PLA "Esilammita PLA"
 	#define MSG_PREHEAT_PLA0 "Esilammita PLA 1"
@@ -1299,6 +1308,7 @@
 	#define MSG_AUTOSTART " Autostart"
 	#define MSG_DISABLE_STEPPERS "Amortar motors"
 	#define MSG_AUTO_HOME "Levar a l'orichen"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Establir zero"
 	#define MSG_PREHEAT_PLA "Precalentar PLA"
 	#define MSG_PREHEAT_PLA0 "Precalentar PLA0"
@@ -1431,6 +1441,7 @@
 	#define MSG_AUTOSTART "Autostart"
 	#define MSG_DISABLE_STEPPERS "Motoren uit"
 	#define MSG_AUTO_HOME "Auto home"
+	#define MSG_SET_HOME_OFFSETS "Set home offsets"
 	#define MSG_SET_ORIGIN "Nulpunt instellen"
 	#define MSG_PREHEAT_PLA "PLA voorverwarmen"
 	#define MSG_PREHEAT_PLA0 "PLA voorverw. 0"
diff --git a/Marlin/motion_control.cpp b/Marlin/motion_control.cpp
index 76609054f..b26cbafc8 100644
--- a/Marlin/motion_control.cpp
+++ b/Marlin/motion_control.cpp
@@ -44,6 +44,14 @@ void mc_arc(float *position, float *target, float *offset, uint8_t axis_0, uint8
   if (angular_travel < 0) { angular_travel += 2*M_PI; }
   if (isclockwise) { angular_travel -= 2*M_PI; }
   
+  //20141002:full circle for G03 did not work, e.g. G03 X80 Y80 I20 J0 F2000 is giving an Angle of zero so head is not moving
+  //to compensate when start pos = target pos && angle is zero -> angle = 2Pi
+  if (position[axis_0] == target[axis_0] && position[axis_1] == target[axis_1] && angular_travel == 0)
+  {
+	  angular_travel += 2*M_PI;
+  }
+  //end fix G03
+  
   float millimeters_of_travel = hypot(angular_travel*radius, fabs(linear_travel));
   if (millimeters_of_travel < 0.001) { return; }
   uint16_t segments = floor(millimeters_of_travel/MM_PER_ARC_SEGMENT);
diff --git a/Marlin/pins.h b/Marlin/pins.h
index 9351d06c5..7488940ce 100644
--- a/Marlin/pins.h
+++ b/Marlin/pins.h
@@ -531,7 +531,7 @@
 * Arduino Mega pin assignment
 *
 ****************************************************************************************/
-#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
+#if MOTHERBOARD == 3 || MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 36 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
 #define KNOWN_BOARD 1
 
 //////////////////FIX THIS//////////////
@@ -547,7 +547,7 @@
 // #define RAMPS_V_1_0
 
 
-#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
+#if MOTHERBOARD == 33 || MOTHERBOARD == 34 || MOTHERBOARD == 35 || MOTHERBOARD == 36 ||  MOTHERBOARD == 77 || MOTHERBOARD == 67 || MOTHERBOARD == 68
 
   #define LARGE_FLASH true
 
@@ -628,6 +628,15 @@
     #define E1_DIR_PIN         34
     #define E1_ENABLE_PIN      30
 
+#if MOTHERBOARD == 34  //FMM added for Filament Extruder
+#ifdef FILAMENT_SENSOR
+	  //define analog pin for the filament width sensor input
+	  //Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
+      #define FILWIDTH_PIN        5
+#endif
+#endif
+
+
     #if MOTHERBOARD == 68
       #define E2_STEP_PIN        23
       #define E2_DIR_PIN         25
@@ -653,7 +662,7 @@
     #define FAN_PIN            4 // IO pin. Buffer needed
   #endif
 
-  #if MOTHERBOARD == 77
+  #if MOTHERBOARD == 77 || MOTHERBOARD == 36
     #define FAN_PIN            8
   #endif
 
@@ -709,7 +718,7 @@
     #define TEMP_2_PIN         -1   // ANALOG NUMBERING
   #endif
 
-  #if MOTHERBOARD == 35
+  #if MOTHERBOARD == 35 || MOTHERBOARD == 36
     #define HEATER_BED_PIN     -1    // NO BED
   #else
     #if MOTHERBOARD == 77
@@ -1762,6 +1771,9 @@
   #define Z_STOP_PIN         36
   #define TEMP_0_PIN          1  // Extruder / Analog pin numbering
   #define TEMP_BED_PIN        0  // Bed / Analog pin numbering
+  #ifdef FILAMENT_SENSOR
+   #define FILWIDTH_PIN        2
+  #endif //FILAMENT_SENSOR
 #endif
 
 #define TEMP_1_PIN         -1
@@ -2078,8 +2090,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
 #define Z_DIR_PIN          28
 #define Z_STOP_PIN         30
 
-#define E0_STEP_PIN         17
-#define E0_DIR_PIN          21
+#define E0_STEP_PIN        17
+#define E0_DIR_PIN         21
 
 #define LED_PIN            -1
 
@@ -2396,6 +2408,10 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
   #endif
 #endif //ULTRA_LCD
 
+#ifdef FILAMENT_SENSOR
+  //Filip added pin for Filament sensor analog input 
+  #define FILWIDTH_PIN        3
+#endif //FILAMENT_SENSOR
 
 #endif
 
diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp
index 4ae1871cd..fe617501f 100644
--- a/Marlin/planner.cpp
+++ b/Marlin/planner.cpp
@@ -119,6 +119,10 @@ static long x_segment_time[3]={MAX_FREQ_TIME + 1,0,0};     // Segment times (in
 static long y_segment_time[3]={MAX_FREQ_TIME + 1,0,0};
 #endif
 
+#ifdef FILAMENT_SENSOR
+ static char meas_sample; //temporary variable to hold filament measurement sample
+#endif
+
 // Returns the index of the next block in the ring buffer
 // NOTE: Removed modulo (%) operator, which uses an expensive divide and multiplication.
 static int8_t next_block_index(int8_t block_index) {
@@ -762,6 +766,49 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
   block->nominal_speed = block->millimeters * inverse_second; // (mm/sec) Always > 0
   block->nominal_rate = ceil(block->step_event_count * inverse_second); // (step/sec) Always > 0
 
+#ifdef FILAMENT_SENSOR
+  //FMM update ring buffer used for delay with filament measurements
+  
+  
+    if((extruder==FILAMENT_SENSOR_EXTRUDER_NUM) && (delay_index2 > -1))  //only for extruder with filament sensor and if ring buffer is initialized
+  	  {
+    delay_dist = delay_dist + delta_mm[E_AXIS];  //increment counter with next move in e axis
+  
+    while (delay_dist >= (10*(MAX_MEASUREMENT_DELAY+1)))  //check if counter is over max buffer size in mm
+      	  delay_dist = delay_dist - 10*(MAX_MEASUREMENT_DELAY+1);  //loop around the buffer
+    while (delay_dist<0)
+    	  delay_dist = delay_dist + 10*(MAX_MEASUREMENT_DELAY+1); //loop around the buffer
+      
+    delay_index1=delay_dist/10.0;  //calculate index
+    
+    //ensure the number is within range of the array after converting from floating point
+    if(delay_index1<0)
+    	delay_index1=0;
+    else if (delay_index1>MAX_MEASUREMENT_DELAY)
+    	delay_index1=MAX_MEASUREMENT_DELAY;
+    	
+    if(delay_index1 != delay_index2)  //moved index
+  	  {
+    	meas_sample=widthFil_to_size_ratio()-100;  //subtract off 100 to reduce magnitude - to store in a signed char
+  	  }
+    while( delay_index1 != delay_index2)
+  	  {
+  	  delay_index2 = delay_index2 + 1;
+  	if(delay_index2>MAX_MEASUREMENT_DELAY)
+  			  delay_index2=delay_index2-(MAX_MEASUREMENT_DELAY+1);  //loop around buffer when incrementing
+  	  if(delay_index2<0)
+  		delay_index2=0;
+  	  else if (delay_index2>MAX_MEASUREMENT_DELAY)
+  		delay_index2=MAX_MEASUREMENT_DELAY;  
+  	  
+  	  measurement_delay[delay_index2]=meas_sample;
+  	  }
+    	
+    
+  	  }
+#endif
+
+
   // Calculate and limit speed in mm/sec for each axis
   float current_speed[4];
   float speed_factor = 1.0; //factor <=1 do decrease speed
diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp
index 9bc8eb839..9e22eb198 100644
--- a/Marlin/stepper.cpp
+++ b/Marlin/stepper.cpp
@@ -1241,7 +1241,7 @@ void microstep_init()
   pinMode(Y_MS1_PIN,OUTPUT);
   pinMode(Y_MS2_PIN,OUTPUT);
   pinMode(Z_MS1_PIN,OUTPUT);
-  pinMode(Z_MS2_PIN,OUTPUT);  
+  pinMode(Z_MS2_PIN,OUTPUT);
   pinMode(E0_MS1_PIN,OUTPUT);
   pinMode(E0_MS2_PIN,OUTPUT);
   for(int i=0;i<=4;i++) microstep_mode(i,microstep_modes[i]);
diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp
index 6a5d58e3b..af5d8c130 100644
--- a/Marlin/temperature.cpp
+++ b/Marlin/temperature.cpp
@@ -74,7 +74,10 @@ unsigned char soft_pwm_bed;
 #ifdef BABYSTEPPING
   volatile int babystepsTodo[3]={0,0,0};
 #endif
-  
+
+#ifdef FILAMENT_SENSOR
+  int current_raw_filwidth = 0;  //Holds measured filament diameter - one extruder only
+#endif  
 //===========================================================================
 //=============================private variables============================
 //===========================================================================
@@ -161,6 +164,9 @@ unsigned long watchmillis[EXTRUDERS] = ARRAY_BY_EXTRUDERS(0,0,0);
 #define SOFT_PWM_SCALE 0
 #endif
 
+#ifdef FILAMENT_SENSOR
+  static int meas_shift_index;  //used to point to a delayed sample in buffer for filament width sensor
+#endif
 //===========================================================================
 //=============================   functions      ============================
 //===========================================================================
@@ -604,6 +610,28 @@ void manage_heater()
       }
     #endif
   #endif
+  
+//code for controlling the extruder rate based on the width sensor 
+#ifdef FILAMENT_SENSOR
+  if(filament_sensor) 
+	{
+	meas_shift_index=delay_index1-meas_delay_cm;
+		  if(meas_shift_index<0)
+			  meas_shift_index = meas_shift_index + (MAX_MEASUREMENT_DELAY+1);  //loop around buffer if needed
+		  
+		  //get the delayed info and add 100 to reconstitute to a percent of the nominal filament diameter
+		  //then square it to get an area
+		  
+		  if(meas_shift_index<0)
+			  meas_shift_index=0;
+		  else if (meas_shift_index>MAX_MEASUREMENT_DELAY)
+			  meas_shift_index=MAX_MEASUREMENT_DELAY;
+		  
+		     volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] = pow((float)(100+measurement_delay[meas_shift_index])/100.0,2);
+		     if (volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] <0.01)
+		    	 volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]=0.01;
+	}
+#endif
 }
 
 #define PGM_RD_W(x)   (short)pgm_read_word(&x)
@@ -697,6 +725,9 @@ static void updateTemperaturesFromRawValues()
     #ifdef TEMP_SENSOR_1_AS_REDUNDANT
       redundant_temperature = analog2temp(redundant_temperature_raw, 1);
     #endif
+    #ifdef FILAMENT_SENSOR  && (FILWIDTH_PIN > -1)    //check if a sensor is supported 
+      filament_width_meas = analog2widthFil();
+    #endif  
     //Reset the watchdog after we know we have a temperature measurement.
     watchdog_reset();
 
@@ -705,6 +736,36 @@ static void updateTemperaturesFromRawValues()
     CRITICAL_SECTION_END;
 }
 
+
+// For converting raw Filament Width to milimeters 
+#ifdef FILAMENT_SENSOR
+float analog2widthFil() { 
+return current_raw_filwidth/16383.0*5.0; 
+//return current_raw_filwidth; 
+} 
+ 
+// For converting raw Filament Width to a ratio 
+int widthFil_to_size_ratio() { 
+ 
+float temp; 
+      
+temp=filament_width_meas;
+if(filament_width_meas<MEASURED_LOWER_LIMIT)
+	temp=filament_width_nominal;  //assume sensor cut out
+else if (filament_width_meas>MEASURED_UPPER_LIMIT)
+	temp= MEASURED_UPPER_LIMIT;
+
+
+return(filament_width_nominal/temp*100); 
+
+
+} 
+#endif
+
+
+
+
+
 void tp_init()
 {
 #if (MOTHERBOARD == 80) && ((TEMP_SENSOR_0==-1)||(TEMP_SENSOR_1==-1)||(TEMP_SENSOR_2==-1)||(TEMP_SENSOR_BED==-1))
@@ -804,6 +865,17 @@ void tp_init()
     #endif
   #endif
   
+  //Added for Filament Sensor 
+  #ifdef FILAMENT_SENSOR
+   #if defined(FILWIDTH_PIN) && (FILWIDTH_PIN > -1) 
+	#if FILWIDTH_PIN < 8 
+       	   DIDR0 |= 1<<FILWIDTH_PIN;  
+	#else 
+       	   DIDR2 |= 1<<(FILWIDTH_PIN - 8);  
+	#endif 
+   #endif
+  #endif
+  
   // Use timer0 for temperature measurement
   // Interleave temperature interrupt with millies interrupt
   OCR0B = 128;
@@ -1116,7 +1188,7 @@ ISR(TIMER0_COMPB_vect)
   static unsigned long raw_temp_1_value = 0;
   static unsigned long raw_temp_2_value = 0;
   static unsigned long raw_temp_bed_value = 0;
-  static unsigned char temp_state = 8;
+  static unsigned char temp_state = 10;
   static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
   static unsigned char soft_pwm_0;
   #if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
@@ -1129,6 +1201,10 @@ ISR(TIMER0_COMPB_vect)
   static unsigned char soft_pwm_b;
   #endif
   
+  #if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
+   static unsigned long raw_filwidth_value = 0;  //added for filament width sensor
+  #endif
+  
   if(pwm_count == 0){
     soft_pwm_0 = soft_pwm[0];
     if(soft_pwm_0 > 0) { 
@@ -1255,10 +1331,39 @@ ISR(TIMER0_COMPB_vect)
       #if defined(TEMP_2_PIN) && (TEMP_2_PIN > -1)
         raw_temp_2_value += ADC;
       #endif
-      temp_state = 0;
-      temp_count++;
+      temp_state = 8;//change so that Filament Width is also measured
+      
       break;
-    case 8: //Startup, delay initial temp reading a tiny bit so the hardware can settle.
+    case 8: //Prepare FILWIDTH 
+     #if defined(FILWIDTH_PIN) && (FILWIDTH_PIN> -1) 
+      #if FILWIDTH_PIN>7 
+         ADCSRB = 1<<MUX5;
+      #else
+         ADCSRB = 0; 
+      #endif 
+      ADMUX = ((1 << REFS0) | (FILWIDTH_PIN & 0x07)); 
+      ADCSRA |= 1<<ADSC; // Start conversion 
+     #endif 
+     lcd_buttons_update();       
+     temp_state = 9; 
+     break; 
+    case 9:   //Measure FILWIDTH 
+     #if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1) 
+     //raw_filwidth_value += ADC;  //remove to use an IIR filter approach 
+      if(ADC>102)  //check that ADC is reading a voltage > 0.5 volts, otherwise don't take in the data.
+        {
+    	raw_filwidth_value= raw_filwidth_value-(raw_filwidth_value>>7);  //multipliy raw_filwidth_value by 127/128
+        
+        raw_filwidth_value= raw_filwidth_value + ((unsigned long)ADC<<7);  //add new ADC reading 
+        }
+     #endif 
+     temp_state = 0;   
+      
+     temp_count++;
+     break;      
+      
+      
+    case 10: //Startup, delay initial temp reading a tiny bit so the hardware can settle.
       temp_state = 0;
       break;
 //    default:
@@ -1267,7 +1372,7 @@ ISR(TIMER0_COMPB_vect)
 //      break;
   }
     
-  if(temp_count >= OVERSAMPLENR) // 8 * 16 * 1/(16000000/64/256)  = 131ms.
+  if(temp_count >= OVERSAMPLENR) // 10 * 16 * 1/(16000000/64/256)  = 164ms.
   {
     if (!temp_meas_ready) //Only update the raw values if they have been read. Else we could be updating them during reading.
     {
@@ -1283,6 +1388,12 @@ ISR(TIMER0_COMPB_vect)
 #endif
       current_temperature_bed_raw = raw_temp_bed_value;
     }
+
+//Add similar code for Filament Sensor - can be read any time since IIR filtering is used 
+#if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
+  current_raw_filwidth = raw_filwidth_value>>10;  //need to divide to get to 0-16384 range since we used 1/128 IIR filter approach 
+#endif
+    
     
     temp_meas_ready = true;
     temp_count = 0;
diff --git a/Marlin/temperature.h b/Marlin/temperature.h
index df2b5deac..ca4efabec 100644
--- a/Marlin/temperature.h
+++ b/Marlin/temperature.h
@@ -31,6 +31,14 @@
 void tp_init();  //initialize the heating
 void manage_heater(); //it is critical that this is called periodically.
 
+#ifdef FILAMENT_SENSOR
+// For converting raw Filament Width to milimeters 
+ float analog2widthFil(); 
+ 
+// For converting raw Filament Width to an extrusion ratio 
+ int widthFil_to_size_ratio();
+#endif
+
 // low level conversion routines
 // do not use these routines and variables outside of temperature.cpp
 extern int target_temperature[EXTRUDERS];  
diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h
index 07b385e11..ac1dea736 100644
--- a/Marlin/thermistortables.h
+++ b/Marlin/thermistortables.h
@@ -621,6 +621,75 @@ const short temptable_11[][2] PROGMEM = {
 };
 #endif
 
+#if (THERMISTORHEATER_0 == 13) || (THERMISTORHEATER_1 == 13) || (THERMISTORHEATER_2 == 13) || (THERMISTORBED == 13)
+// Hisens thermistor B25/50 =3950 +/-1%
+
+const short temptable_13[][2] PROGMEM = {
+ {	22.5*OVERSAMPLENR,	300	},
+{	24.125*OVERSAMPLENR,	295	},
+{	25.875*OVERSAMPLENR,	290	},
+{	27.8125*OVERSAMPLENR,	285	},
+{	29.9375*OVERSAMPLENR,	280	},
+{	32.25*OVERSAMPLENR,	275	},
+{	34.8125*OVERSAMPLENR,	270	},
+{	37.625*OVERSAMPLENR,	265	},
+{	40.6875*OVERSAMPLENR,	260	},
+{	44.0625*OVERSAMPLENR,	255	},
+{	47.75*OVERSAMPLENR,	250	},
+{	51.8125*OVERSAMPLENR,	245	},
+{	56.3125*OVERSAMPLENR,	240	},
+{	61.25*OVERSAMPLENR,	235	},
+{	66.75*OVERSAMPLENR,	230	},
+{	72.8125*OVERSAMPLENR,	225	},
+{	79.5*OVERSAMPLENR,	220	},
+{	87*OVERSAMPLENR,	215	},
+{	95.3125*OVERSAMPLENR,	210	},
+{	104.1875*OVERSAMPLENR,	205	},
+{	112.75*OVERSAMPLENR,	200	},
+{	123.125*OVERSAMPLENR,	195	},
+{	135.75*OVERSAMPLENR,	190	},
+{	148.3125*OVERSAMPLENR,	185	},
+{	163.8125*OVERSAMPLENR,	180	},
+{	179*OVERSAMPLENR,	175	},
+{	211.125*OVERSAMPLENR,	170	},
+{	216.125*OVERSAMPLENR,	165	},
+{	236.5625*OVERSAMPLENR,	160	},
+{	258.5*OVERSAMPLENR,	155	},
+{	279.875*OVERSAMPLENR,	150	},
+{	305.375*OVERSAMPLENR,	145	},
+{	333.25*OVERSAMPLENR,	140	},
+{	362.5625*OVERSAMPLENR,	135	},
+{	393.6875*OVERSAMPLENR,	130	},
+{	425*OVERSAMPLENR,	125	},
+{	460.625*OVERSAMPLENR,	120	},
+{	495.1875*OVERSAMPLENR,	115	},
+{	530.875*OVERSAMPLENR,	110	},
+{	567.25*OVERSAMPLENR,	105	},
+{	601.625*OVERSAMPLENR,	100	},
+{	637.875*OVERSAMPLENR,	95	},
+{	674.5625*OVERSAMPLENR,	90	},
+{	710*OVERSAMPLENR,	85	},
+{	744.125*OVERSAMPLENR,	80	},
+{	775.9375*OVERSAMPLENR,	75	},
+{	806.875*OVERSAMPLENR,	70	},
+{	835.1875*OVERSAMPLENR,	65	},
+{	861.125*OVERSAMPLENR,	60	},
+{	884.375*OVERSAMPLENR,	55	},
+{	904.5625*OVERSAMPLENR,	50	},
+{	923.8125*OVERSAMPLENR,	45	},
+{	940.375*OVERSAMPLENR,	40	},
+{	954.625*OVERSAMPLENR,	35	},
+{	966.875*OVERSAMPLENR,	30	},
+{	977.0625*OVERSAMPLENR,	25	},
+{	986*OVERSAMPLENR,	20	},
+{	993.375*OVERSAMPLENR,	15	},
+{	999.5*OVERSAMPLENR,	10	},
+{	1004.5*OVERSAMPLENR,	5	},
+{	1008.5*OVERSAMPLENR,	0	}
+
+ };
+#endif
+
 #if (THERMISTORHEATER_0 == 20) || (THERMISTORHEATER_1 == 20) || (THERMISTORHEATER_2 == 20) || (THERMISTORBED == 20) // PT100 with INA826 amp on Ultimaker v2.0 electronics
 /* The PT100 in the Ultimaker v2.0 electronics has a high sample value for a high temperature.
 This does not match the normal thermistor behaviour so we need to set the following defines */
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index a2749ccb1..550b9cb0b 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -328,6 +328,23 @@ static void lcd_autostart_sd()
 }
 #endif
 
+void lcd_set_home_offsets()
+{
+    for(int8_t i=0; i < NUM_AXIS; i++) {
+      if (i != E_AXIS) {
+        add_homing[i] -= current_position[i];
+        current_position[i] = 0.0;
+      }
+    }
+    plan_set_position(0.0, 0.0, 0.0, current_position[E_AXIS]);
+
+    // Audio feedback
+    enquecommand_P(PSTR("M300 S659 P200"));
+    enquecommand_P(PSTR("M300 S698 P200"));
+    lcd_return_to_status();
+}
+
+
 #ifdef BABYSTEPPING
 static void lcd_babystep_x()
 {
@@ -395,7 +412,9 @@ static void lcd_tune_menu()
     START_MENU();
     MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
     MENU_ITEM_EDIT(int3, MSG_SPEED, &feedmultiply, 10, 999);
+#if TEMP_SENSOR_0 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+#endif
 #if TEMP_SENSOR_1 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
 #endif
@@ -587,6 +606,7 @@ static void lcd_prepare_menu()
 #endif
     MENU_ITEM(gcode, MSG_DISABLE_STEPPERS, PSTR("M84"));
     MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
+    MENU_ITEM(function, MSG_SET_HOME_OFFSETS, lcd_set_home_offsets);
     //MENU_ITEM(gcode, MSG_SET_ORIGIN, PSTR("G92 X0 Y0 Z0"));
 #if TEMP_SENSOR_0 != 0
   #if TEMP_SENSOR_1 != 0 || TEMP_SENSOR_2 != 0 || TEMP_SENSOR_BED != 0
@@ -801,7 +821,9 @@ static void lcd_control_temperature_menu()
 
     START_MENU();
     MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
+#if TEMP_SENSOR_0 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE, &target_temperature[0], 0, HEATER_0_MAXTEMP - 15);
+#endif
 #if TEMP_SENSOR_1 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE1, &target_temperature[1], 0, HEATER_1_MAXTEMP - 15);
 #endif
@@ -812,7 +834,7 @@ static void lcd_control_temperature_menu()
     MENU_ITEM_EDIT(int3, MSG_BED, &target_temperature_bed, 0, BED_MAXTEMP - 15);
 #endif
     MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &fanSpeed, 0, 255);
-#ifdef AUTOTEMP
+#if defined AUTOTEMP && (TEMP_SENSOR_0 != 0)
     MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled);
     MENU_ITEM_EDIT(float3, MSG_MIN, &autotemp_min, 0, HEATER_0_MAXTEMP - 15);
     MENU_ITEM_EDIT(float3, MSG_MAX, &autotemp_max, 0, HEATER_0_MAXTEMP - 15);
@@ -837,7 +859,9 @@ static void lcd_control_temperature_preheat_pla_settings_menu()
     START_MENU();
     MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
     MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &plaPreheatFanSpeed, 0, 255);
+#if TEMP_SENSOR_0 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE, &plaPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15);
+#endif
 #if TEMP_SENSOR_BED != 0
     MENU_ITEM_EDIT(int3, MSG_BED, &plaPreheatHPBTemp, 0, BED_MAXTEMP - 15);
 #endif
@@ -852,7 +876,9 @@ static void lcd_control_temperature_preheat_abs_settings_menu()
     START_MENU();
     MENU_ITEM(back, MSG_TEMPERATURE, lcd_control_temperature_menu);
     MENU_ITEM_EDIT(int3, MSG_FAN_SPEED, &absPreheatFanSpeed, 0, 255);
+#if TEMP_SENSOR_0 != 0
     MENU_ITEM_EDIT(int3, MSG_NOZZLE, &absPreheatHotendTemp, 0, HEATER_0_MAXTEMP - 15);
+#endif
 #if TEMP_SENSOR_BED != 0
     MENU_ITEM_EDIT(int3, MSG_BED, &absPreheatHPBTemp, 0, BED_MAXTEMP - 15);
 #endif
diff --git a/Marlin/ultralcd_implementation_hitachi_HD44780.h b/Marlin/ultralcd_implementation_hitachi_HD44780.h
index 11e0a9519..befb25bfd 100644
--- a/Marlin/ultralcd_implementation_hitachi_HD44780.h
+++ b/Marlin/ultralcd_implementation_hitachi_HD44780.h
@@ -467,7 +467,7 @@ static void lcd_implementation_status_screen()
 # endif//LCD_WIDTH > 19
     lcd.setCursor(LCD_WIDTH - 8, 1);
     lcd.print('Z');
-    lcd.print(ftostr32(current_position[Z_AXIS]));
+    lcd.print(ftostr32(current_position[Z_AXIS] + 0.00001));
 #endif//LCD_HEIGHT > 2
 
 #if LCD_HEIGHT > 3
diff --git a/README.md b/README.md
index 017e989e8..d11925ff7 100644
--- a/README.md
+++ b/README.md
@@ -2,6 +2,7 @@
 Marlin 3D Printer Firmware
 ==========================
 [![Coverity Scan Build Status](https://scan.coverity.com/projects/2224/badge.svg)](https://scan.coverity.com/projects/2224)
+[![Travis Build Status](https://travis-ci.org/ErikZalm/Marlin.svg)](https://travis-ci.org/ErikZalm/Marlin)
 
 Marlin has a GPL license because I believe in open development.
 Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent.
@@ -233,6 +234,10 @@ M Codes
 *  M400 - Finish all moves
 *  M401 - Lower z-probe if present
 *  M402 - Raise z-probe if present
+*  M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
+*  M405 - Turn on Filament Sensor extrusion control.  Optional D<delay in cm> to set delay in centimeters between sensor and extruder
+*  M406 - Turn off Filament Sensor extrusion control
+*  M407 - Displays measured filament diameter
 *  M500 - stores paramters in EEPROM
 *  M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 *  M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.

From 92e21d3ee2a56cc5e8804170bc1bd93793a23217 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 16:56:37 -0800
Subject: [PATCH 06/11] M0-M1 Enhancements
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Allow M0 and M1 to include a message string. Ignore clicks on “Wait for
user” so that the Info Screen stays up.
---
 Marlin/Marlin_main.cpp | 22 +++++++++++++++++++---
 Marlin/ultralcd.cpp    | 30 ++++++++++++++++++++++++++++--
 Marlin/ultralcd.h      |  2 ++
 3 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 94b3d2624..d3895b83e 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1863,11 +1863,26 @@ void process_commands()
     case 0: // M0 - Unconditional stop - Wait for user button press on LCD
     case 1: // M1 - Conditional stop - Wait for user button press on LCD
     {
-      LCD_MESSAGEPGM(MSG_USERWAIT);
+      char *src = strchr_pointer + 2;
+
       codenum = 0;
-      if(code_seen('P')) codenum = code_value(); // milliseconds to wait
-      if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
 
+      bool hasP = code_seen('P');
+      if (hasP) codenum = code_value(); // milliseconds to wait
+
+      bool hasS = code_seen('S');
+      if (hasS) codenum = code_value() * 1000; // seconds to wait
+
+      if (!hasP && !hasS && *src != '\0') {
+        while (*src == ' ') ++src;
+        starpos = strchr(src, '*');
+        if (starpos != NULL) *(starpos) = '\0';
+        lcd_setstatus(src);
+      } else {
+        LCD_MESSAGEPGM(MSG_USERWAIT);
+      }
+
+      lcd_ignore_click();
       st_synchronize();
       previous_millis_cmd = millis();
       if (codenum > 0){
@@ -1877,6 +1892,7 @@ void process_commands()
           manage_inactivity();
           lcd_update();
         }
+        lcd_ignore_click(false);
       }else{
         while(!lcd_clicked()){
           manage_heater();
diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 734c859d0..1c8479da0 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -162,6 +162,7 @@ bool lcd_oldcardstatus;
 menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently active menu */
 uint32_t lcd_next_update_millis;
 uint8_t lcd_status_update_delay;
+bool ignore_click = false;
 uint8_t lcdDrawUpdate = 2;                  /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */
 
 //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
@@ -189,7 +190,8 @@ static void lcd_status_screen()
         lcd_status_update_delay = 10;   /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */
     }
 #ifdef ULTIPANEL
-    if (LCD_CLICKED)
+
+    if (lcd_clicked())
     {
         currentMenu = lcd_main_menu;
         encoderPosition = 0;
@@ -1315,6 +1317,11 @@ void lcd_update()
     }
 }
 
+void lcd_ignore_click(bool b)
+{
+    ignore_click = b;
+}
+
 void lcd_setstatus(const char* message)
 {
     if (lcd_status_message_level > 0)
@@ -1444,7 +1451,26 @@ void lcd_buzz(long duration, uint16_t freq)
 
 bool lcd_clicked()
 {
-  return LCD_CLICKED;
+  static bool wait_for_unclick = false;
+  bool current_click = LCD_CLICKED;
+
+  if (ignore_click) {
+    if (wait_for_unclick) {
+      if (!current_click) {
+        ignore_click = wait_for_unclick = false;
+      }
+      else {
+        current_click = false;
+      }
+    }
+    else if (current_click) {
+      wait_for_unclick = true;
+      current_click = false;
+      lcd_quick_feedback();
+    }
+  }
+
+  return current_click;
 }
 #endif//ULTIPANEL
 
diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h
index 9bf685805..761cd5f01 100644
--- a/Marlin/ultralcd.h
+++ b/Marlin/ultralcd.h
@@ -48,6 +48,8 @@
   void lcd_buzz(long duration,uint16_t freq);
   bool lcd_clicked();
 
+  void lcd_ignore_click(bool b=true);
+
   #ifdef NEWPANEL
     #define EN_C (1<<BLEN_C)
     #define EN_B (1<<BLEN_B)

From 3f54c9ba33fe9f6248d93ed383b6d2a816fabdd4 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 17:12:08 -0800
Subject: [PATCH 07/11] Relocate click ignore code into info screen

---
 Marlin/ultralcd.cpp | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp
index 1c8479da0..550b9cb0b 100644
--- a/Marlin/ultralcd.cpp
+++ b/Marlin/ultralcd.cpp
@@ -163,6 +163,7 @@ menuFunc_t currentMenu = lcd_status_screen; /* function pointer to the currently
 uint32_t lcd_next_update_millis;
 uint8_t lcd_status_update_delay;
 bool ignore_click = false;
+bool wait_for_unclick;
 uint8_t lcdDrawUpdate = 2;                  /* Set to none-zero when the LCD needs to draw, decreased after every draw. Set to 2 in LCD routines so the LCD gets at least 1 full redraw (first redraw is partial) */
 
 //prevMenu and prevEncoderPosition are used to store the previous menu location when editing settings.
@@ -191,7 +192,25 @@ static void lcd_status_screen()
     }
 #ifdef ULTIPANEL
 
-    if (lcd_clicked())
+    bool current_click = LCD_CLICKED;
+
+    if (ignore_click) {
+        if (wait_for_unclick) {
+          if (!current_click) {
+              ignore_click = wait_for_unclick = false;
+          }
+          else {
+              current_click = false;
+          }
+        }
+        else if (current_click) {
+            lcd_quick_feedback();
+            wait_for_unclick = true;
+            current_click = false;
+        }
+    }
+
+    if (current_click)
     {
         currentMenu = lcd_main_menu;
         encoderPosition = 0;
@@ -1320,6 +1339,7 @@ void lcd_update()
 void lcd_ignore_click(bool b)
 {
     ignore_click = b;
+    wait_for_unclick = false;
 }
 
 void lcd_setstatus(const char* message)
@@ -1451,26 +1471,7 @@ void lcd_buzz(long duration, uint16_t freq)
 
 bool lcd_clicked()
 {
-  static bool wait_for_unclick = false;
-  bool current_click = LCD_CLICKED;
-
-  if (ignore_click) {
-    if (wait_for_unclick) {
-      if (!current_click) {
-        ignore_click = wait_for_unclick = false;
-      }
-      else {
-        current_click = false;
-      }
-    }
-    else if (current_click) {
-      wait_for_unclick = true;
-      current_click = false;
-      lcd_quick_feedback();
-    }
-  }
-
-  return current_click;
+  return LCD_CLICKED;
 }
 #endif//ULTIPANEL
 

From d12b24758a2b1d8cc392294d499bdd0940768ff8 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Mon, 24 Nov 2014 18:50:11 -0800
Subject: [PATCH 08/11] Clear LCD to welcome_msg if not printing
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The welcome message is more appropriate than “resuming print” if
nothing is printing.
---
 Marlin/Marlin_main.cpp | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index d3895b83e..1b8b2f979 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1385,7 +1385,7 @@ void process_commands()
       st_synchronize();
       codenum += millis();  // keep track of when we started waiting
       previous_millis_cmd = millis();
-      while(millis()  < codenum ){
+      while(millis() < codenum) {
         manage_heater();
         manage_inactivity();
         lcd_update();
@@ -1413,7 +1413,6 @@ void process_commands()
       plan_bed_level_matrix.set_to_identity();  //Reset the plane ("erase" all leveling data)
 #endif //ENABLE_AUTO_BED_LEVELING
 
-
       saved_feedrate = feedrate;
       saved_feedmultiply = feedmultiply;
       feedmultiply = 100;
@@ -1874,9 +1873,9 @@ void process_commands()
       if (hasS) codenum = code_value() * 1000; // seconds to wait
 
       if (!hasP && !hasS && *src != '\0') {
-        while (*src == ' ') ++src;
         starpos = strchr(src, '*');
         if (starpos != NULL) *(starpos) = '\0';
+        while (*src == ' ') ++src;
         lcd_setstatus(src);
       } else {
         LCD_MESSAGEPGM(MSG_USERWAIT);
@@ -1887,7 +1886,7 @@ void process_commands()
       previous_millis_cmd = millis();
       if (codenum > 0){
         codenum += millis();  // keep track of when we started waiting
-        while(millis()  < codenum && !lcd_clicked()){
+        while(millis() < codenum && !lcd_clicked()){
           manage_heater();
           manage_inactivity();
           lcd_update();
@@ -1900,7 +1899,10 @@ void process_commands()
           lcd_update();
         }
       }
-      LCD_MESSAGEPGM(MSG_RESUMING);
+      if (IS_SD_PRINTING)
+        LCD_MESSAGEPGM(MSG_RESUMING);
+      else
+        LCD_MESSAGEPGM(WELCOME_MSG);
     }
     break;
 #endif

From 12b51d6060f9b8603e67908a09d81e56211bda36 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 26 Nov 2014 09:21:37 -0800
Subject: [PATCH 09/11] Ignore S and P if no value >0 is included.

---
 Marlin/Marlin_main.cpp | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp
index 1b8b2f979..5e49b89a8 100644
--- a/Marlin/Marlin_main.cpp
+++ b/Marlin/Marlin_main.cpp
@@ -1866,12 +1866,15 @@ void process_commands()
 
       codenum = 0;
 
-      bool hasP = code_seen('P');
-      if (hasP) codenum = code_value(); // milliseconds to wait
-
-      bool hasS = code_seen('S');
-      if (hasS) codenum = code_value() * 1000; // seconds to wait
-
+      bool hasP = false, hasS = false;
+      if (code_seen('P')) {
+        codenum = code_value(); // milliseconds to wait
+        hasP = codenum > 0;
+      }
+      if (code_seen('S')) {
+        codenum = code_value() * 1000; // seconds to wait
+        hasS = codenum > 0;
+      }
       if (!hasP && !hasS && *src != '\0') {
         starpos = strchr(src, '*');
         if (starpos != NULL) *(starpos) = '\0';

From 587485250128bd2c451889193fff2fd26acf1a53 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 26 Nov 2014 21:00:02 -0800
Subject: [PATCH 10/11] get latest Marlin_v1 changes

---
 DEADJOE | 53 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)
 create mode 100644 DEADJOE

diff --git a/DEADJOE b/DEADJOE
new file mode 100644
index 000000000..acfa30191
--- /dev/null
+++ b/DEADJOE
@@ -0,0 +1,53 @@
+
+*** These modified files were found in JOE when it aborted on Wed Nov 26 20:52:44 2014
+*** JOE was aborted because the terminal closed
+
+*** File '/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG'
+Merge remote-tracking branch 'upstream/Marlin_v1' into lcd_wait_better
+
+# Please enter a commit message to explain why this merge is necessary,
+# especially if it merges an updated upstream into a topic branch.
+#
+# Lines starting with '#' will be ignored, and an empty message aborts
+# the commit.
+
+*** File '(Unnamed)'
+sort
+echo
+
+*** File '(Unnamed)'
+d7
+/drupal7
+3bl-justmeans-wp/editorial
+SLICER_HOME
+remindmeinbox
+&>
+8
+alchemist
+/Users/lordscott/Sites/git.loc
+goth
+
+*** File '(Unnamed)'
+mysql
+socket
+.sock
+error_repo
+zone
+ini_set
+localhost
+/Library/WebServer/Documents/gitprojects
+mydemoproject1
+alias
+
+*** File '(Unnamed)'
+/Users/lordscott/bin/clean
+thinkyhead.conf
+/etc/hosts
+thinkyhead.conf
+drupal7.conf
+thinkyhead.conf
+thinkyhead.conf
+thinkyhead.conf
+drupal7.conf
+thinkyhead.conf
+/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG

From 662fe8288bb4a3bceed28ef72fbb37fbb8dc6b39 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <sourcetree@thinkyhead.com>
Date: Wed, 26 Nov 2014 21:07:48 -0800
Subject: [PATCH 11/11] kill DEADJOE

---
 DEADJOE | 53 -----------------------------------------------------
 1 file changed, 53 deletions(-)
 delete mode 100644 DEADJOE

diff --git a/DEADJOE b/DEADJOE
deleted file mode 100644
index acfa30191..000000000
--- a/DEADJOE
+++ /dev/null
@@ -1,53 +0,0 @@
-
-*** These modified files were found in JOE when it aborted on Wed Nov 26 20:52:44 2014
-*** JOE was aborted because the terminal closed
-
-*** File '/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG'
-Merge remote-tracking branch 'upstream/Marlin_v1' into lcd_wait_better
-
-# Please enter a commit message to explain why this merge is necessary,
-# especially if it merges an updated upstream into a topic branch.
-#
-# Lines starting with '#' will be ignored, and an empty message aborts
-# the commit.
-
-*** File '(Unnamed)'
-sort
-echo
-
-*** File '(Unnamed)'
-d7
-/drupal7
-3bl-justmeans-wp/editorial
-SLICER_HOME
-remindmeinbox
-&>
-8
-alchemist
-/Users/lordscott/Sites/git.loc
-goth
-
-*** File '(Unnamed)'
-mysql
-socket
-.sock
-error_repo
-zone
-ini_set
-localhost
-/Library/WebServer/Documents/gitprojects
-mydemoproject1
-alias
-
-*** File '(Unnamed)'
-/Users/lordscott/bin/clean
-thinkyhead.conf
-/etc/hosts
-thinkyhead.conf
-drupal7.conf
-thinkyhead.conf
-thinkyhead.conf
-thinkyhead.conf
-drupal7.conf
-thinkyhead.conf
-/Volumes/Projects/MAKER/Firmware/Marlin-thinkyhead/.git/MERGE_MSG