diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 15bfd5ef4..2fe035f6c 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 36c1239da..f8c84739d 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 55e068957..db8d390c6 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 2 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index d5b6ed0b2..e2bb15834 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -123,6 +123,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 7b9849bac..daf41cfbf 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index e99d4dd01..9037af19f 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -127,6 +127,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 2d3067c6d..b145d9a5a 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index d1522c3fa..276828341 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 13c484ac1..522760893 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -145,6 +145,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 0da46efdd..cebbcc137 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index ae59c5d15..8553ac700 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -123,6 +123,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 638ce4032..b1f19d42a 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration.h b/Marlin/example_configurations/delta/biv2.5/Configuration.h index 4560cd8b9..55f99dc41 100644 --- a/Marlin/example_configurations/delta/biv2.5/Configuration.h +++ b/Marlin/example_configurations/delta/biv2.5/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 2 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index e2e9227b3..b92ee7dae 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 4729e39be..080268d6b 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index a37bced78..3f98ab105 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -126,6 +126,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index c23b546ab..8af8a844e 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -113,6 +113,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index db34f1ab0..bc5c1317f 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend. diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 9e85c919d..eb3759e37 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -120,6 +120,9 @@ // :[1,2,3,4] #define EXTRUDERS 1 +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + // Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). // The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). // For the other hotends it is their distance from the extruder 0 hotend.