From 77769e284f0e2a8ca9af93aff880972fd05a7bab Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 5 May 2017 13:30:19 -0500 Subject: [PATCH] Edit configuration comments --- Marlin/Configuration.h | 277 +++++++++--------- .../Cartesio/Configuration.h | 277 +++++++++--------- .../Felix/Configuration.h | 277 +++++++++--------- .../Felix/DUAL/Configuration.h | 277 +++++++++--------- .../FolgerTech-i3-2020/Configuration.h | 277 +++++++++--------- .../Hephestos/Configuration.h | 277 +++++++++--------- .../Hephestos_2/Configuration.h | 277 +++++++++--------- .../K8200/Configuration.h | 277 +++++++++--------- .../K8400/Configuration.h | 277 +++++++++--------- .../K8400/Dual-head/Configuration.h | 277 +++++++++--------- .../RepRapWorld/Megatronics/Configuration.h | 277 +++++++++--------- .../RigidBot/Configuration.h | 277 +++++++++--------- .../SCARA/Configuration.h | 277 +++++++++--------- .../TAZ4/Configuration.h | 277 +++++++++--------- .../TinyBoy2/Configuration.h | 277 +++++++++--------- .../WITBOX/Configuration.h | 277 +++++++++--------- .../adafruit/ST7565/Configuration.h | 277 +++++++++--------- .../FLSUN/auto_calibrate/Configuration.h | 277 +++++++++--------- .../delta/FLSUN/kossel_mini/Configuration.h | 277 +++++++++--------- .../delta/generic/Configuration.h | 277 +++++++++--------- .../delta/kossel_mini/Configuration.h | 277 +++++++++--------- .../delta/kossel_pro/Configuration.h | 277 +++++++++--------- .../delta/kossel_xl/Configuration.h | 277 +++++++++--------- .../gCreate_gMax1.5+/Configuration.h | 277 +++++++++--------- .../makibox/Configuration.h | 277 +++++++++--------- .../tvrrug/Round2/Configuration.h | 277 +++++++++--------- .../wt150/Configuration.h | 277 +++++++++--------- 27 files changed, 3699 insertions(+), 3780 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 478bb9a1e..4c1a39b8f 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -987,23 +987,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1011,44 +1005,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1073,33 +1067,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1108,78 +1104,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1207,7 +1204,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 1c363e529..f38780bd2 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -985,23 +985,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1009,44 +1003,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1071,33 +1065,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1106,78 +1102,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1205,7 +1202,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index 477063b4f..ec12db1ab 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -969,23 +969,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -993,44 +987,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1055,33 +1049,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1090,78 +1086,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1189,7 +1186,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index f3d60d472..88c750fb3 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -969,23 +969,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -993,44 +987,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1055,33 +1049,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1090,78 +1086,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1189,7 +1186,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h index e467d3eed..0e131869f 100644 --- a/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech-i3-2020/Configuration.h @@ -991,23 +991,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1015,44 +1009,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1077,33 +1071,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1112,78 +1108,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1211,7 +1208,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index ceee2afdf..02dfe9c4f 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -977,23 +977,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1001,44 +995,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1063,33 +1057,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1098,78 +1094,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ #define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1197,7 +1194,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/Hephestos_2/Configuration.h b/Marlin/example_configurations/Hephestos_2/Configuration.h index 9ca6416e4..5c81632d8 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration.h @@ -980,23 +980,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ #define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1004,44 +998,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ #define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1066,33 +1060,35 @@ //#define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1101,78 +1097,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1200,7 +1197,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 1f4964895..914deba96 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1015,23 +1015,17 @@ #define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1039,44 +1033,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1101,33 +1095,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1139,78 +1135,79 @@ // K8200: for Display VM8201 with SD slot #if ENABLED(K8200_VM8201) -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1238,7 +1235,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/K8400/Configuration.h b/Marlin/example_configurations/K8400/Configuration.h index 6705dc9fd..1a0bd3e03 100644 --- a/Marlin/example_configurations/K8400/Configuration.h +++ b/Marlin/example_configurations/K8400/Configuration.h @@ -986,23 +986,17 @@ #define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1010,44 +1004,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1072,33 +1066,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1107,78 +1103,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ #define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1206,7 +1203,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/K8400/Dual-head/Configuration.h index dd0ab0e12..4d04d6ea6 100644 --- a/Marlin/example_configurations/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/K8400/Dual-head/Configuration.h @@ -986,23 +986,17 @@ #define PREHEAT_2_TEMP_BED 0 #define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1010,44 +1004,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1072,33 +1066,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1107,78 +1103,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ #define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1206,7 +1203,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index aff721065..1b18f8ba9 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -986,23 +986,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1010,44 +1004,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1072,33 +1066,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1107,78 +1103,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ #define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1206,7 +1203,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index d90db6f6e..4a109a5c9 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -985,23 +985,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1009,44 +1003,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1071,33 +1065,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1106,78 +1102,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED #define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1205,7 +1202,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 55d991b20..63bc0f333 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -1001,23 +1001,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1025,44 +1019,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1087,33 +1081,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1122,78 +1118,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1221,7 +1218,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/TAZ4/Configuration.h b/Marlin/example_configurations/TAZ4/Configuration.h index 83c7a1873..1b3d640a4 100644 --- a/Marlin/example_configurations/TAZ4/Configuration.h +++ b/Marlin/example_configurations/TAZ4/Configuration.h @@ -1006,23 +1006,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1030,44 +1024,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1092,33 +1086,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1127,78 +1123,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1226,7 +1223,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 966ec447f..39b4ca6b1 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -1042,23 +1042,17 @@ #define PREHEAT_2_TEMP_BED 90 // TB2: ABS default 110, 90 is the maximum temp at 12V supply #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ #define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1066,44 +1060,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1128,33 +1122,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1163,78 +1159,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1262,7 +1259,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 5143d7bd7..4c6ac763b 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -977,23 +977,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1001,44 +995,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1063,33 +1057,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1098,78 +1094,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ #define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1197,7 +1194,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 1874b12d3..a620b8029 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -986,23 +986,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1010,44 +1004,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1072,33 +1066,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1107,78 +1103,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ #define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1206,7 +1203,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h index e7a7fd20b..f31c8f9e8 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h @@ -1104,23 +1104,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1128,44 +1122,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1190,33 +1184,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1225,78 +1221,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 WESTERN -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1324,7 +1321,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 9654740b1..7e312bfcb 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -1106,23 +1106,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1130,44 +1124,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1192,33 +1186,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1227,78 +1223,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 WESTERN -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1326,7 +1323,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index d93cd6699..0cceaf4c7 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -1093,23 +1093,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1117,44 +1111,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1179,33 +1173,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1214,78 +1210,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1313,7 +1310,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index 7d6754fc4..ff3f5b286 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -1096,23 +1096,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1120,44 +1114,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1182,33 +1176,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1217,78 +1213,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1316,7 +1313,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index 244976604..2128469ea 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -1102,23 +1102,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1126,44 +1120,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1188,33 +1182,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1223,78 +1219,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1322,7 +1319,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index f3e549470..479b4e466 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -1160,23 +1160,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1184,44 +1178,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1246,33 +1240,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1281,78 +1277,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1380,7 +1377,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h index a841fb604..62ccbfefa 100644 --- a/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate_gMax1.5+/Configuration.h @@ -971,23 +971,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -995,44 +989,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1057,33 +1051,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1092,78 +1088,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ #define SD_CHECK_AND_RETRY // @@ -1191,7 +1188,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 1a4d79019..735278440 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -989,23 +989,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1013,44 +1007,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1075,33 +1069,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1110,78 +1106,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ #define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1209,7 +1206,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 0caad869f..ec6485eab 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -982,23 +982,17 @@ #define PREHEAT_2_TEMP_BED 100 #define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1006,44 +1000,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1068,33 +1062,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ //#define PRINTCOUNTER //============================================================================= @@ -1103,78 +1099,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ //#define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ //#define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1202,7 +1199,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE // diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index dde673fc9..5deaccf7d 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -991,23 +991,17 @@ #define PREHEAT_2_TEMP_BED 110 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 -// -// Nozzle Park -- EXPERIMENTAL -// -// When enabled allows the user to define a special XYZ position, inside the -// machine's topology, to park the nozzle when idle or when receiving the G27 -// command. -// -// The "P" paramenter controls what is the action applied to the Z axis: -// P0: (Default) If current Z-pos is lower than Z-park then the nozzle will -// be raised to reach Z-park height. -// -// P1: No matter the current Z-pos, the nozzle will be raised/lowered to -// reach Z-park height. -// -// P2: The nozzle height will be raised by Z-park amount but never going over -// the machine's limit of Z_MAX_POS. -// +/** + * Nozzle Park -- EXPERIMENTAL + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ //#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) @@ -1015,44 +1009,44 @@ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } #endif -// -// Clean Nozzle Feature -- EXPERIMENTAL -// -// When enabled allows the user to send G12 to start the nozzle cleaning -// process, the G-Code accepts two parameters: -// "P" for pattern selection -// "S" for defining the number of strokes/repetitions -// -// Available list of patterns: -// P0: This is the default pattern, this process requires a sponge type -// material at a fixed bed location. S defines "strokes" i.e. -// back-and-forth movements between the starting and end points. -// -// P1: This starts a zig-zag pattern between (X0, Y0) and (X1, Y1), "T" -// defines the number of zig-zag triangles to be done. "S" defines the -// number of strokes aka one back-and-forth movement. Zig-zags will -// be performed in whichever dimension is smallest. As an example, -// sending "G12 P1 S1 T3" will execute: -// -// -- -// | (X0, Y1) | /\ /\ /\ | (X1, Y1) -// | | / \ / \ / \ | -// A | | / \ / \ / \ | -// | | / \ / \ / \ | -// | (X0, Y0) | / \/ \/ \ | (X1, Y0) -// -- +--------------------------------+ -// |________|_________|_________| -// T1 T2 T3 -// -// P2: This starts a circular pattern with circle with middle in -// NOZZLE_CLEAN_CIRCLE_MIDDLE radius of R and stroke count of S. -// Before starting the circle nozzle goes to NOZZLE_CLEAN_START_POINT. -// -// Caveats: End point Z should use the same value as Start point Z. -// -// Attention: This is an EXPERIMENTAL feature, in the future the G-code arguments -// may change to add new functionality like different wipe patterns. -// +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) @@ -1077,33 +1071,35 @@ #define NOZZLE_CLEAN_GOBACK #endif -// -// Print job timer -// -// Enable this option to automatically start and stop the -// print job timer when M104/M109/M190 commands are received. -// M104 (extruder without wait) - high temp = none, low temp = stop timer -// M109 (extruder with wait) - high temp = start timer, low temp = stop timer -// M190 (bed with wait) - high temp = start timer, low temp = none -// -// In all cases the timer can be started and stopped using -// the following commands: -// -// - M75 - Start the print job timer -// - M76 - Pause the print job timer -// - M77 - Stop the print job timer +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ #define PRINTJOB_TIMER_AUTOSTART -// -// Print Counter -// -// When enabled Marlin will keep track of some print statistical data such as: -// - Total print jobs -// - Total successful print jobs -// - Total failed print jobs -// - Total time printing -// -// This information can be viewed by the M78 command. +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ #define PRINTCOUNTER //============================================================================= @@ -1112,78 +1108,79 @@ // @section lcd -// -// LCD LANGUAGE -// -// Here you may choose the language used by Marlin on the LCD menus, the following -// list of languages are available: -// en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, -// kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test -// -// :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } -// +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, de, el, el-gr, es, eu, fi, fr, gl, hr, it, + * kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, tr, uk, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'tr':'Turkish', 'uk':'Ukrainian', 'test':'TEST' } + */ #define LCD_LANGUAGE en -// -// LCD Character Set -// -// Note: This option is NOT applicable to Graphical Displays. -// -// All character-based LCD's provide ASCII plus one of these -// language extensions: -// -// - JAPANESE ... the most common -// - WESTERN ... with more accented characters -// - CYRILLIC ... for the Russian language -// -// To determine the language extension installed on your controller: -// -// - Compile and upload with LCD_LANGUAGE set to 'test' -// - Click the controller to view the LCD menu -// - The LCD will display Japanese, Western, or Cyrillic text -// -// See https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language -// -// :['JAPANESE', 'WESTERN', 'CYRILLIC'] -// +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See https: *github.com/MarlinFirmware/Marlin/wiki/LCD-Language + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ #define DISPLAY_CHARSET_HD44780 JAPANESE -// -// LCD TYPE -// -// You may choose ULTRA_LCD if you have character based LCD with 16x2, 16x4, 20x2, -// 20x4 char/lines or DOGLCD for the full graphics display with 128x64 pixels -// (ST7565R family). (This option will be set automatically for certain displays.) -// -// IMPORTANT NOTE: The U8glib library is required for Full Graphic Display! -// https://github.com/olikraus/U8glib_Arduino -// +/** + * LCD TYPE + * + * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + * (These options will be enabled automatically for most displays.) + * + * IMPORTANT: The U8glib library is required for Full Graphic Display! + * https://github.com/olikraus/U8glib_Arduino + */ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display -// -// SD CARD -// -// SD Card support is disabled by default. If your controller has an SD slot, -// you must uncomment the following option or it won't work. -// +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ #define SDSUPPORT -// -// SD CARD: SPI SPEED -// -// Uncomment ONE of the following items to use a slower SPI transfer -// speed. This is usually required if you're getting volume init errors. -// +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED -// -// SD CARD: ENABLE CRC -// -// Use CRC checks and retries on the SD communication. -// +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ //#define SD_CHECK_AND_RETRY // @@ -1211,7 +1208,7 @@ */ // -// This option reverses the encoder direction everywhere +// This option reverses the encoder direction everywhere. // // Set this option if CLOCKWISE causes values to DECREASE //