From 697ee2dc502eb9e9dda8600a57ed21d7db621547 Mon Sep 17 00:00:00 2001 From: Natealus Date: Sun, 8 Feb 2015 01:05:05 -0700 Subject: [PATCH 1/4] Compiling errors with 4 Extruders defined Here were a few changes that I had to make/add lines for the 4th hotend. A compiling problem in the Temperature.cpp and missing lines in configuration.h and configuration_adv.h. I added these lines in all of the example configs too. --- Marlin/Configuration.h | 3 +++ .../example_configurations/Hephestos/Configuration.h | 5 ++++- Marlin/example_configurations/K8200/Configuration.h | 5 ++++- Marlin/example_configurations/SCARA/Configuration.h | 5 ++++- .../example_configurations/SCARA/Configuration_adv.h | 12 ++++++++++++ Marlin/example_configurations/WITBOX/Configuration.h | 5 ++++- Marlin/example_configurations/delta/Configuration.h | 5 ++++- .../example_configurations/delta/Configuration_adv.h | 12 ++++++++++++ .../example_configurations/makibox/Configuration.h | 5 ++++- .../makibox/Configuration_adv.h | 12 ++++++++++++ .../tvrrug/Round2/Configuration.h | 5 ++++- .../tvrrug/Round2/Configuration_adv.h | 12 ++++++++++++ Marlin/temperature.cpp | 3 +-- 13 files changed, 80 insertions(+), 9 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 770c86eb1..ea4bf9600 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -122,6 +122,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 0 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -139,6 +140,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -147,6 +149,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 2823f2d95..c5554546e 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -122,6 +122,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 0 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -139,6 +140,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -147,6 +149,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 260 #define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index 06e944b19..eb53407ff 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -124,6 +124,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 5 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -141,6 +142,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -149,6 +151,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 8bc4eb70e..9a165a3c6 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -142,6 +142,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 1 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -159,6 +160,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -167,6 +169,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index 8c65ad26c..40d4fc2e9 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -78,6 +78,7 @@ #define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -478,6 +479,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -491,6 +496,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -509,6 +517,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 4a12bda51..26302076b 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -125,6 +125,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 0 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -142,6 +143,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -150,6 +152,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 260 #define HEATER_1_MAXTEMP 260 #define HEATER_2_MAXTEMP 260 +#define HEATER_3_MAXTEMP 260 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/delta/Configuration.h b/Marlin/example_configurations/delta/Configuration.h index 3eb268041..d3a6f7fcc 100644 --- a/Marlin/example_configurations/delta/Configuration.h +++ b/Marlin/example_configurations/delta/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -147,6 +147,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 0 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -164,6 +165,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -172,6 +174,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/delta/Configuration_adv.h b/Marlin/example_configurations/delta/Configuration_adv.h index 7150c2c88..73264982b 100644 --- a/Marlin/example_configurations/delta/Configuration_adv.h +++ b/Marlin/example_configurations/delta/Configuration_adv.h @@ -78,6 +78,7 @@ #define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -472,6 +473,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -485,6 +490,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -503,6 +511,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 99feceba8..be3b0f69d 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -127,6 +127,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 12 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -144,6 +145,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -152,6 +154,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 // If your bed has low resistance e.g. .6 ohm and throws the fuse you can duty cycle it to reduce the diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index bf646f0f4..bcdb09ef4 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -78,6 +78,7 @@ #define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -469,6 +470,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -482,6 +487,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -500,6 +508,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 4ca415d8f..4c01596ce 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -1,4 +1,4 @@ -#ifndef CONFIGURATION_H +#ifndef CONFIGURATION_H #define CONFIGURATION_H #include "boards.h" @@ -126,6 +126,7 @@ Here are some standard links for getting your machine calibrated: #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 #define TEMP_SENSOR_BED 5 // This makes temp sensor 1 a redundant sensor for sensor 0. If the temperatures difference between these sensors is to high the print will be aborted. @@ -143,6 +144,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MINTEMP 5 #define HEATER_1_MINTEMP 5 #define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 #define BED_MINTEMP 5 // When temperature exceeds max temp, your heater will be switched off. @@ -151,6 +153,7 @@ Here are some standard links for getting your machine calibrated: #define HEATER_0_MAXTEMP 275 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 #define BED_MAXTEMP 150 #define CONFIG_STEPPERS_TOSHIBA 1 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 6f1bf7322..46c0a9ba5 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -78,6 +78,7 @@ #define EXTRUDER_0_AUTO_FAN_PIN -1 #define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1 +#define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -472,6 +473,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #define THERMISTORHEATER_2 TEMP_SENSOR_2 #define HEATER_2_USES_THERMISTOR #endif +#if TEMP_SENSOR_3 > 0 + #define THERMISTORHEATER_3 TEMP_SENSOR_3 + #define HEATER_3_USES_THERMISTOR +#endif #if TEMP_SENSOR_BED > 0 #define THERMISTORBED TEMP_SENSOR_BED #define BED_USES_THERMISTOR @@ -485,6 +490,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st #if TEMP_SENSOR_2 == -1 #define HEATER_2_USES_AD595 #endif +#if TEMP_SENSOR_3 == -1 + #define HEATER_3_USES_AD595 +#endif #if TEMP_SENSOR_BED == -1 #define BED_USES_AD595 #endif @@ -503,6 +511,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st #undef HEATER_2_MINTEMP #undef HEATER_2_MAXTEMP #endif +#if TEMP_SENSOR_3 == 0 + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif #if TEMP_SENSOR_BED == 0 #undef BED_MINTEMP #undef BED_MAXTEMP diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 9889e1fda..b04ea4d96 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -465,8 +465,7 @@ void checkExtruderAutoFans() #endif #if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1 if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN - && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) - && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) + && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN) setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0); #endif } From 38a500d05cf033a549c3e2b1b5c7fe32f92a9c48 Mon Sep 17 00:00:00 2001 From: Natealus Date: Sun, 8 Feb 2015 03:14:59 -0700 Subject: [PATCH 2/4] Viki 2 Implementation I've insert the define and pointer entries for the Viki 2 and miniViki from Panucatt in all of the example configs and main config. With these additions and with pins done in the old single pin.h style...I was able to get the display working fine save for needing to turn Delta Segments per Second down. But that's a common graphics lcd issue being looked into right now. I need assistance in understanding how the new divided pins files fit together because my previous attempts at trying to get it to work appropriately didn't seem successful. This originally came from trying to find out how to swap the XYZ Min and Max Endstop pins in the Azteeg X3 Pro. It only comes with one set of connectors and they're Min Endstops. My previous experience didn't turn out well trying to tell the firmware to home to the Min Endstops so the best solution I found was to swap the pins in the firmware. If I'm missing a conflict with a setup other than delta please let me know, but it makes sense in my setup. --- Marlin/Configuration.h | 22 +++++++++++++++++++ Marlin/Marlin_main.cpp | 9 ++++++++ Marlin/dogm_lcd_implementation.h | 3 +++ .../Hephestos/Configuration.h | 22 +++++++++++++++++++ .../K8200/Configuration.h | 22 +++++++++++++++++++ .../SCARA/Configuration.h | 22 +++++++++++++++++++ .../WITBOX/Configuration.h | 22 +++++++++++++++++++ .../delta/Configuration.h | 22 +++++++++++++++++++ .../makibox/Configuration.h | 22 +++++++++++++++++++ .../tvrrug/Round2/Configuration.h | 22 +++++++++++++++++++ 10 files changed, 188 insertions(+) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index ea4bf9600..68cd20135 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -584,6 +584,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -617,6 +623,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index e42b33f41..ca6311d83 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -632,6 +632,15 @@ void setup() digitalWrite(SERVO0_PIN, LOW); // turn it off #endif // Z_PROBE_SLED setup_homepin(); + +#ifdef STAT_LED_RED + pinMode(STAT_LED_RED, OUTPUT); + digitalWrite(STAT_LED_RED, LOW); // turn it off +#endif +#ifdef STAT_LED_BLUE + pinMode(STAT_LED_BLUE, OUTPUT); + digitalWrite(STAT_LED_BLUE, LOW); // turn it off +#endif } diff --git a/Marlin/dogm_lcd_implementation.h b/Marlin/dogm_lcd_implementation.h index 1ccff63e3..f512d3295 100644 --- a/Marlin/dogm_lcd_implementation.h +++ b/Marlin/dogm_lcd_implementation.h @@ -92,6 +92,9 @@ U8GLIB_ST7920_128X64_RRD u8g(0); #elif defined(MAKRPANEL) // The MaKrPanel display, ST7565 controller as well U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); +#elif defined(VIKI2) || defined(miniVIKI) +// Mini Viki and Viki 2.0 LCD, ST7565 controller as well +U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0); #else // for regular DOGM128 display with HW-SPI U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0); // HW-SPI Com: CS, A0 diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index c5554546e..9df2c5a67 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -590,6 +590,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller #define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -623,6 +629,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index eb53407ff..d3992890f 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -600,6 +600,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -633,6 +639,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 9a165a3c6..6b465f29d 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -593,6 +593,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -626,6 +632,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 26302076b..3d974b154 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -594,6 +594,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller #define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -627,6 +633,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/delta/Configuration.h b/Marlin/example_configurations/delta/Configuration.h index d3a6f7fcc..6306ddc50 100644 --- a/Marlin/example_configurations/delta/Configuration.h +++ b/Marlin/example_configurations/delta/Configuration.h @@ -498,6 +498,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -538,6 +544,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index be3b0f69d..03fdee783 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -568,6 +568,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -601,6 +607,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 4c01596ce..6ca7bad6a 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -581,6 +581,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of // http://reprap.org/wiki/MaKr3d_MaKrPanel //#define MAKRPANEL +// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD +// http://panucatt.com +// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib +//#define VIKI2 +//#define miniVIKI + // The RepRapDiscount Smart Controller (white PCB) // http://reprap.org/wiki/RepRapDiscount_Smart_Controller //#define REPRAP_DISCOUNT_SMART_CONTROLLER @@ -614,6 +620,22 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DEFAULT_LCD_CONTRAST 17 #endif +#if defined(miniVIKI) || defined(VIKI2) + #define ULTRA_LCD //general LCD support, also 16x2 + #define DOGLCD // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family) + #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store. + + #ifdef miniVIKI + #define DEFAULT_LCD_CONTRAST 95 + #else + #define DEFAULT_LCD_CONTRAST 40 + #endif + + #define ENCODER_PULSES_PER_STEP 4 + #define ENCODER_STEPS_PER_MENU_ITEM 1 +#endif + + #if defined (REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define DOGLCD #define U8GLIB_ST7920 From f4b0a40abb6cf31d742eb1b180605346b8fef942 Mon Sep 17 00:00:00 2001 From: Natealus Date: Sun, 8 Feb 2015 15:43:58 -0700 Subject: [PATCH 3/4] Additional fixes to temperature.cpp and found another missing line Looks like INVERT_E3_DIR was missing in the configuration.h also as I did a test compile with 4 extruders and Azteeg X3 Pro defined. So I also added those lines too. Additional formatting to make the comments line up better in that section. --- Marlin/Configuration.h | 5 +++-- Marlin/example_configurations/Hephestos/Configuration.h | 3 ++- Marlin/example_configurations/K8200/Configuration.h | 5 +++-- Marlin/example_configurations/SCARA/Configuration.h | 3 ++- Marlin/example_configurations/WITBOX/Configuration.h | 5 +++-- Marlin/example_configurations/delta/Configuration.h | 3 ++- Marlin/example_configurations/makibox/Configuration.h | 5 +++-- .../example_configurations/tvrrug/Round2/Configuration.h | 7 ++++--- Marlin/temperature.cpp | 3 +++ 9 files changed, 25 insertions(+), 14 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 68cd20135..c05c3a0e3 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -344,12 +344,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled -#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h index 9df2c5a67..93a0f1809 100644 --- a/Marlin/example_configurations/Hephestos/Configuration.h +++ b/Marlin/example_configurations/Hephestos/Configuration.h @@ -354,8 +354,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h index d3992890f..e17ee9e33 100644 --- a/Marlin/example_configurations/K8200/Configuration.h +++ b/Marlin/example_configurations/K8200/Configuration.h @@ -360,10 +360,11 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false -#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 6b465f29d..43a94f705 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -383,8 +383,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstop s when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h index 3d974b154..02aa94b2d 100644 --- a/Marlin/example_configurations/WITBOX/Configuration.h +++ b/Marlin/example_configurations/WITBOX/Configuration.h @@ -354,12 +354,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_E false // For all extruders #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled -#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true +#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/delta/Configuration.h b/Marlin/example_configurations/delta/Configuration.h index 6306ddc50..ba5f6590a 100644 --- a/Marlin/example_configurations/delta/Configuration.h +++ b/Marlin/example_configurations/delta/Configuration.h @@ -371,8 +371,9 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define INVERT_Z_DIR false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 03fdee783..e054918b9 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -355,9 +355,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true -#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E0_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 6ca7bad6a..fccc267f2 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -356,11 +356,12 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of #define DISABLE_INACTIVE_EXTRUDER true //disable only inactive extruders and keep active extruder enabled #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true -#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false -#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true +#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false +#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false -#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E1_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false +#define INVERT_E3_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false // ENDSTOP SETTINGS: // Sets direction of endstops when homing; 1=MAX, -1=MIN diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index b04ea4d96..3936c2f05 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -460,11 +460,14 @@ void checkExtruderAutoFans() #endif #if defined(EXTRUDER_2_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN > -1 if (EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN + && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) && EXTRUDER_2_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) setExtruderAutoFanState(EXTRUDER_2_AUTO_FAN_PIN, (fanState & 4) != 0); #endif #if defined(EXTRUDER_3_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN > -1 if (EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN + && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_0_AUTO_FAN_PIN) + && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_1_AUTO_FAN_PIN) && EXTRUDER_3_AUTO_FAN_PIN != EXTRUDER_2_AUTO_FAN_PIN) setExtruderAutoFanState(EXTRUDER_3_AUTO_FAN_PIN, (fanState & 8) != 0); #endif From ea9e49b20d9964bf5bbbc73c9bddfe2d27fc865b Mon Sep 17 00:00:00 2001 From: Natealus Date: Thu, 12 Feb 2015 00:56:47 -0700 Subject: [PATCH 4/4] ARRAY_BY_EXTRUDERS 4th hotend PID parameters --- Marlin/temperature.cpp | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index 3936c2f05..d5bd2d63d 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -136,11 +136,11 @@ static volatile bool temp_meas_ready = false; #ifdef PIDTEMP #ifdef PID_PARAMS_PER_EXTRUDER - float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp); - float Ki[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT); - float Kd[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT); + float Kp[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp, DEFAULT_Kp); + float Ki[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT, DEFAULT_Ki*PID_dT); + float Kd[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT, DEFAULT_Kd / PID_dT); #ifdef PID_ADD_EXTRUSION_RATE - float Kc[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc); + float Kc[EXTRUDERS] = ARRAY_BY_EXTRUDERS(DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc, DEFAULT_Kc); #endif // PID_ADD_EXTRUSION_RATE #else //PID_PARAMS_PER_EXTRUDER float Kp = DEFAULT_Kp;