From 80682ec61e6ce7d15167b376be85e7136c3dffae Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 10 Nov 2017 04:49:09 -0600 Subject: [PATCH] Updates Traditional Chinese, rebase for bugfix-1.1.x --- Marlin/language_zh_TW.h | 58 ++++++++++++++++++++--------------------- 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/Marlin/language_zh_TW.h b/Marlin/language_zh_TW.h index 777c09312..315f77f7f 100644 --- a/Marlin/language_zh_TW.h +++ b/Marlin/language_zh_TW.h @@ -36,12 +36,12 @@ #define MSG_LCD_ENDSTOPS _UxGT("擋塊") //"Endstops" // Max length 8 characters #define MSG_MAIN _UxGT("主選單") //"Main" #define MSG_AUTOSTART _UxGT("自動開始") //"Autostart" -#define MSG_DISABLE_STEPPERS _UxGT("關閉步進驅動") //"Disable steppers" +#define MSG_DISABLE_STEPPERS _UxGT("關閉步進馬達") //"Disable steppers" #define MSG_AUTO_HOME _UxGT("自動回原點") //"Auto home" -#define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X" -#define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y" -#define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z" -#define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原位") //"Homing XYZ" +#define MSG_AUTO_HOME_X _UxGT("回X原點") //"Home X" +#define MSG_AUTO_HOME_Y _UxGT("回Y原點") //"Home Y" +#define MSG_AUTO_HOME_Z _UxGT("回Z原點") //"Home Z" +#define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原點") //"Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("單擊開始熱床調平") //"Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("下個熱床調平點") //"Next Point" #define MSG_LEVEL_BED_DONE _UxGT("完成熱床調平") //"Leveling Done!" @@ -62,7 +62,7 @@ #define MSG_SWITCH_PS_ON _UxGT("電源打開") //"Switch power on" #define MSG_SWITCH_PS_OFF _UxGT("電源關閉") //"Switch power off" #define MSG_EXTRUDE _UxGT("擠出") //"Extrude" -#define MSG_RETRACT _UxGT("回抽") //"Retract" +#define MSG_RETRACT _UxGT("回縮") //"Retract" #define MSG_MOVE_AXIS _UxGT("移動軸") //"Move axis" #define MSG_BED_LEVELING _UxGT("調平熱床") //"Bed leveling" #define MSG_LEVEL_BED _UxGT("調平熱床") //"Level bed" @@ -101,7 +101,7 @@ #define MSG_VMIN _UxGT("最小進料速率") //"Vmin" min_feedrate_mm_s #define MSG_VTRAV_MIN _UxGT("最小移動速率") //"VTrav min" min_travel_feedrate_mm_s, (target) speed of the move #define MSG_AMAX _UxGT("最大列印加速度") //"Amax " max_acceleration_mm_per_s2, acceleration in units/s^2 for print moves -#define MSG_A_RETRACT _UxGT("收進加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts +#define MSG_A_RETRACT _UxGT("回縮加速度") //"A-retract" retract_acceleration, E acceleration in mm/s^2 for retracts #define MSG_A_TRAVEL _UxGT("非列印移動加速度") //"A-travel" travel_acceleration, X, Y, Z acceleration in mm/s^2 for travel (non printing) moves #define MSG_STEPS_PER_MM _UxGT("軸步數/mm") //"Steps/mm" axis_steps_per_mm, axis steps-per-unit G92 #define MSG_XSTEPS _UxGT("X軸步數/mm") //"Xsteps/mm" axis_steps_per_mm, axis steps-per-unit G92 @@ -109,38 +109,38 @@ #define MSG_ZSTEPS _UxGT("Z軸步數/mm") //"Zsteps/mm" #define MSG_ESTEPS _UxGT("擠出機步數/mm") //"Esteps/mm" #define MSG_TEMPERATURE _UxGT("溫度") //"Temperature" -#define MSG_MOTION _UxGT("運動") //"Motion" +#define MSG_MOTION _UxGT("運作") //"Motion" #define MSG_FILAMENT _UxGT("絲料測容") //"Filament" lcd_control_volumetric_menu #define MSG_VOLUMETRIC_ENABLED _UxGT("測容積mm³") //"E in mm3" volumetric_enabled #define MSG_FILAMENT_DIAM _UxGT("絲料直徑") //"Fil. Dia." #define MSG_CONTRAST _UxGT("LCD對比度") //"LCD contrast" #define MSG_STORE_EEPROM _UxGT("保存設置") //"Store memory" -#define MSG_LOAD_EEPROM _UxGT("裝載設置") //"Load memory" -#define MSG_RESTORE_FAILSAFE _UxGT("恢複安全值") //"Restore failsafe" +#define MSG_LOAD_EEPROM _UxGT("載入設置") //"Load memory" +#define MSG_RESTORE_FAILSAFE _UxGT("恢復安全值") //"Restore failsafe" #define MSG_REFRESH _UxGT("刷新") //"Refresh" #define MSG_WATCH _UxGT("資訊界面") //"Info screen" #define MSG_PREPARE _UxGT("準備") //"Prepare" #define MSG_TUNE _UxGT("調整") //"Tune" #define MSG_PAUSE_PRINT _UxGT("暫停列印") //"Pause print" -#define MSG_RESUME_PRINT _UxGT("恢複列印") //"Resume print" +#define MSG_RESUME_PRINT _UxGT("恢復列印") //"Resume print" #define MSG_STOP_PRINT _UxGT("停止列印") //"Stop print" #define MSG_CARD_MENU _UxGT("從記憶卡上列印") //"Print from SD" #define MSG_NO_CARD _UxGT("無記憶卡") //"No SD card" #define MSG_DWELL _UxGT("休眠 ...") //"Sleep..." #define MSG_USERWAIT _UxGT("等待用戶 ...") //"Wait for user..." -#define MSG_RESUMING _UxGT("恢複列印中") //"Resuming print" +#define MSG_RESUMING _UxGT("恢復列印中") //"Resuming print" #define MSG_PRINT_ABORTED _UxGT("列印已取消") //"Print aborted" #define MSG_NO_MOVE _UxGT("無移動") //"No move." -#define MSG_KILLED _UxGT("已殺掉") //"KILLED. " +#define MSG_KILLED _UxGT("已砍掉") //"KILLED. " #define MSG_STOPPED _UxGT("已停止") //"STOPPED. " -#define MSG_CONTROL_RETRACT _UxGT("回抽長度mm") //"Retract mm" retract_length, retract length (positive mm) +#define MSG_CONTROL_RETRACT _UxGT("回縮長度mm") //"Retract mm" retract_length, retract length (positive mm) #define MSG_CONTROL_RETRACT_SWAP _UxGT("換手回抽長度mm") //"Swap Re.mm" swap_retract_length, swap retract length (positive mm), for extruder change -#define MSG_CONTROL_RETRACTF _UxGT("回抽速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) +#define MSG_CONTROL_RETRACTF _UxGT("回縮速率mm/s") //"Retract V" retract_feedrate_mm_s, feedrate for retracting (mm/s) #define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm") //"Hop mm" retract_zlift, retract Z-lift -#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回抽恢複長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) -#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回抽恢複長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) -#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回抽恢複後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) -#define MSG_AUTORETRACT _UxGT("自動抽回") //"AutoRetr." autoretract_enabled, +#define MSG_CONTROL_RETRACT_RECOVER _UxGT("回縮恢復長度mm") //"UnRet +mm" retract_recover_length, additional recover length (mm, added to retract length when recovering) +#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("換手回縮恢復長度mm") //"S UnRet+mm" swap_retract_recover_length, additional swap recover length (mm, added to retract length when recovering from extruder change) +#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("回縮恢復後進料速率mm/s") //"UnRet V" retract_recover_feedrate_mm_s, feedrate for recovering from retraction (mm/s) +#define MSG_AUTORETRACT _UxGT("自動回縮") //"AutoRetr." autoretract_enabled, #define MSG_FILAMENTCHANGE _UxGT("更換絲料") //"Change filament" #define MSG_INIT_SDCARD _UxGT("初始化記憶卡") //"Init. SD card" #define MSG_CNG_SDCARD _UxGT("更換記憶卡") //"Change SD card" @@ -175,17 +175,17 @@ #define MSG_DELTA_CALIBRATE_CENTER _UxGT("校準中心") //"Calibrate Center" #define MSG_INFO_MENU _UxGT("關於印表機") //"About Printer" -#define MSG_INFO_PRINTER_MENU _UxGT("印表機信息") //"Printer Info" +#define MSG_INFO_PRINTER_MENU _UxGT("印表機訊息") //"Printer Info" #define MSG_INFO_STATS_MENU _UxGT("印表機統計") //"Printer Stats" -#define MSG_INFO_BOARD_MENU _UxGT("主板信息") //"Board Info" +#define MSG_INFO_BOARD_MENU _UxGT("主板訊息") //"Board Info" #define MSG_INFO_THERMISTOR_MENU _UxGT("溫度計") //"Thermistors" #define MSG_INFO_EXTRUDERS _UxGT("擠出機") //"Extruders" -#define MSG_INFO_BAUDRATE _UxGT("波特率") //"Baud" +#define MSG_INFO_BAUDRATE _UxGT("傳輸率") //"Baud" #define MSG_INFO_PROTOCOL _UxGT("協議") //"Protocol" #if LCD_WIDTH > 19 #define MSG_INFO_PRINT_COUNT _UxGT("列印計數") //"Print Count" -#define MSG_INFO_COMPLETED_PRINTS _UxGT("完成了") //"Completed" +#define MSG_INFO_COMPLETED_PRINTS _UxGT("已完成") //"Completed" #define MSG_INFO_PRINT_TIME _UxGT("總列印時間") //"Total print time" #define MSG_INFO_PRINT_LONGEST _UxGT("最長工作時間") //"Longest job time" #define MSG_INFO_PRINT_FILAMENT _UxGT("總計擠出") //"Extruded total" @@ -204,7 +204,7 @@ #define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:") #define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("擠出更多") //"Extrude more" -#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢複列印") //"Resume print" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("恢復列印") //"Resume print" #if LCD_HEIGHT >= 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("等待開始") //"Wait for start" @@ -215,7 +215,7 @@ #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("") //"" #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入絲料") //"Insert filament" #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("並按鍵") //"and press button" -#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("來繼續 ...") //"to continue..." +#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("繼續 ...") //"to continue..." #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("等待") //"Wait for" #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("進料") //"filament load" #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("") //"" @@ -223,16 +223,16 @@ #define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("絲料擠出") //"filament extrude" #define MSG_FILAMENT_CHANGE_EXTRUDE_3 _UxGT("") //"" #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("等待列印") //"Wait for print" -#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢複") //"to resume" +#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("恢復") //"to resume" #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("") //"" #else // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("請等待 ...") //"Please wait..." #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("退出中 ...") //"Ejecting..." -#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並單擊") //"Insert and Click" -#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("裝載中 ...") //"Loading..." +#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("插入並點擊") //"Insert and Click" +#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("載入中 ...") //"Loading..." #define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("擠出中 ...") //"Extruding..." -#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢複中 ...") //"Resuming..." +#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("恢復中 ...") //"Resuming..." #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_ZH_TW_H