Merge pull request #7380 from thinkyhead/bf_touchy_probe_delay

Implement probing delay for piezo sensors

Marlin/Conditionals_post.h

@@ -688,7 +688,7 @@
   #if FAN_COUNT == 0
     #undef PROBING_FANS_OFF
   #endif
-  #define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF)))
+  #define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
   #define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
 
   /**

Marlin/Configuration.h

@@ -624,14 +624,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/Marlin_main.cpp

@@ -2089,7 +2089,13 @@ static void clean_up_after_endstop_or_probe_move() {
       #if ENABLED(PROBING_FANS_OFF)
         fans_pause(p);
       #endif
-      if (p) safe_delay(25);
+      if (p) safe_delay(
+        #if DELAY_BEFORE_PROBING > 25
+          DELAY_BEFORE_PROBING
+        #else
+          25
+        #endif
+      );
     }
   #endif // QUIET_PROBING
 

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -639,14 +639,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -621,14 +621,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -681,14 +681,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 #define PROBING_HEATERS_OFF       // Turn heaters off when probing
 #define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -630,14 +630,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -610,14 +610,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -621,14 +621,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -610,14 +610,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Cartesio/Configuration.h

@@ -618,14 +618,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -634,14 +634,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Felix/Configuration.h

@@ -602,14 +602,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -602,14 +602,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Folger Tech/i3-2020/Configuration.h

@@ -626,14 +626,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -628,14 +628,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -639,14 +639,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -620,14 +620,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/RigidBot/Configuration.h

@@ -618,14 +618,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/SCARA/Configuration.h

@@ -632,14 +632,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -671,14 +671,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -649,14 +649,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -620,14 +620,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -620,14 +620,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -620,14 +620,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -694,14 +694,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -694,14 +694,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/generic/Configuration.h

@@ -684,14 +684,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -679,14 +679,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -677,14 +677,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -696,14 +696,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -635,14 +635,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/makibox/Configuration.h

@@ -623,14 +623,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -615,14 +615,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

Marlin/example_configurations/wt150/Configuration.h

@@ -626,14 +626,15 @@
 #endif
 
 /**
- * Enable if probing seems unreliable. Heaters and/or fans - consistent with the
- * options selected below - will be disabled during probing so as to minimize
- * potential EM interference by quieting/silencing the source of the 'noise' (the change
- * in current flowing through the wires).  This is likely most useful to users of the
- * BLTouch probe, but may also help those with inductive or other probe types.
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
 //#define PROBING_FANS_OFF          // Turn fans off when probing
+//#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE