From 8e31248adbb1c8b225afa1defe8f4a0629038d36 Mon Sep 17 00:00:00 2001 From: Marcio Teixeira Date: Fri, 22 Sep 2017 12:21:23 -0600 Subject: [PATCH] Added missing file. --- Marlin/pins_EINSYRAMBO.h | 171 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 171 insertions(+) create mode 100644 Marlin/pins_EINSYRAMBO.h diff --git a/Marlin/pins_EINSYRAMBO.h b/Marlin/pins_EINSYRAMBO.h new file mode 100644 index 000000000..fd05e40ff --- /dev/null +++ b/Marlin/pins_EINSYRAMBO.h @@ -0,0 +1,171 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Einsy-Rambo pin assignments + */ + +#ifndef __AVR_ATmega2560__ + #error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu." +#endif + +#define BOARD_NAME "Einsy Rambo" +#define LARGE_FLASH true + +// Enable use of TMC2130 +#define HAVE_TMC2130 +#define X_IS_TMC2130 +#define Y_IS_TMC2130 +#define Z_IS_TMC2130 +#define E0_IS_TMC2130 + +#define BOARD_Z_THRES_PIN 57 // PF3 as defined in "fastio_1280.h" +#define BOARD_X_DIAG_PIN 64 // PK2 as defined in "fastio_1280.h" +#define BOARD_Y_DIAG_PIN 69 // PK7 as defined in "fastio_1280.h" +#define BOARD_Z_DIAG_PIN 68 // PK6 as defined in "fastio_1280.h" +#define BOARD_E0_DIAG_PIN 65 // PK3 as defined in "fastio_1280.h" +#define BOARD_X_MIN_PIN 12 +#define BOARD_Y_MIN_PIN 11 +#define BOARD_Z_MIN_PIN 10 + +// +// Limit Switches +// +#if defined(LULZBOT_SENSORLESS_HOMING) + #define X_MIN_PIN BOARD_X_DIAG_PIN + #define Y_MIN_PIN -1 + #define Z_MIN_PIN BOARD_Y_MIN_PIN + #define X_MAX_PIN -1 + #define Y_MAX_PIN BOARD_Y_DIAG_PIN + #define Z_MAX_PIN BOARD_X_MIN_PIN +#else + #define X_MIN_PIN BOARD_X_MIN_PIN + #define Y_MIN_PIN BOARD_Y_MIN_PIN + #define Z_MIN_PIN BOARD_Z_MIN_PIN + #define X_MAX_PIN -1 // 30 + #define Y_MAX_PIN -1 // 24 + #define Z_MAX_PIN BOARD_Z_THRES_PIN +#endif + +// +// Steppers +// +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 + +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 + +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 + +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 + +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 + +// Microstepping pins - Mapping not from fastio.h (?) +#define X_MS1_PIN -1 +#define X_MS2_PIN -1 +#define X_CS_PIN 41 +#define Y_MS1_PIN -1 +#define Y_MS2_PIN -1 +#define Y_CS_PIN 39 +#define Z_MS1_PIN -1 +#define Z_MS2_PIN -1 +#define Z_CS_PIN 67 +#define E0_MS1_PIN -1 +#define E0_MS2_PIN -1 +#define E0_CS_PIN 66 + +#define MOTOR_CURRENT_PWM_XY_PIN 46 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 44 +// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range +#ifndef MOTOR_CURRENT_PWM_RANGE + #define MOTOR_CURRENT_PWM_RANGE 2000 +#endif +#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1300} + +// +// Temperature Sensors +// +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input + +// +// Heaters / Fans +// +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 6 +#define HEATER_BED_PIN 4 + +#define FAN_PIN 8 +#define FAN1_PIN 6 + +// +// Misc. Functions +// +//#define SDSS 53 // EINY 0-.1 - EINSY 0.3 +#define SDSS 77 // EINSY 0.4 +#define LED_PIN 13 + +// +// LCD / Controller +// +#if ENABLED(ULTRA_LCD) + + #define KILL_PIN 32 + + #if ENABLED(NEWPANEL) + + // Beeper on AUX-4 + #define BEEPER_PIN 84 + + #define LCD_PINS_RS 82 + // EINY 0.1- EINSY-0.3 + //#define LCD_PINS_ENABLE 18 + //#define LCD_PINS_D4 19 + // EINSY 0.4+ + #define LCD_PINS_ENABLE 61 + #define LCD_PINS_D4 59 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + + // buttons are directly attached using AUX-2 + #define BTN_EN1 14 + #define BTN_EN2 72 + #define BTN_ENC 9 // the click + + #define SD_DETECT_PIN 15 + + #endif // NEWPANEL +#endif // ULTRA_LCD