From 907e8e98e5d547ddcb67b8447c857394eac4b10f Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Fri, 10 Apr 2015 14:55:21 -0700 Subject: [PATCH] Add GCodes from Marlin 1.0.3 dev, format as pre --- Documentation/GCodes.md | 227 ++++++++++++++++++++++------------------ 1 file changed, 128 insertions(+), 99 deletions(-) diff --git a/Documentation/GCodes.md b/Documentation/GCodes.md index 57b95cdee..94756f8d9 100644 --- a/Documentation/GCodes.md +++ b/Documentation/GCodes.md @@ -2,105 +2,134 @@ ## G Codes -* G0 -> G1 -* G1 - Coordinated Movement X Y Z E -* G2 - CW ARC -* G3 - CCW ARC -* G4 - Dwell S[seconds] or P[milliseconds] -* G10 - retract filament according to settings of M207 -* G11 - retract recover filament according to settings of M208 -* G28 - Home all Axis -* G29 - Detailed Z-Probe, probes the bed at 3 points. You must be at the home position for this to work correctly. -* G30 - Single Z Probe, probes bed at current XY location. -* G31 - Dock Z Probe sled (if enabled) -* G32 - Undock Z Probe sled (if enabled) -* G90 - Use Absolute Coordinates -* G91 - Use Relative Coordinates -* G92 - Set current position to cordinates given - +``` +G0 -> G1 +G1 - Coordinated Movement X Y Z E +G2 - CW ARC +G3 - CCW ARC +G4 - Dwell S[seconds] or P[milliseconds] +G10 - retract filament according to settings of M207 +G11 - retract recover filament according to settings of M208 +G28 - Home all Axis +G29 - Detailed Z-Probe, probes the bed at 3 points. You must be at the home position for this to work correctly. +G30 - Single Z Probe, probes bed at current XY location. +G31 - Dock Z Probe sled (if enabled) +G32 - Undock Z Probe sled (if enabled) +G90 - Use Absolute Coordinates +G91 - Use Relative Coordinates +G92 - Set current position to cordinates given +``` ## M Codes -* M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) -* M1 - Same as M0 -* M17 - Enable/Power all stepper motors -* M18 - Disable all stepper motors; same as M84 -* M20 - List SD card -* M21 - Init SD card -* M22 - Release SD card -* M23 - Select SD file (M23 filename.g) -* M24 - Start/resume SD print -* M25 - Pause SD print -* M26 - Set SD position in bytes (M26 S12345) -* M27 - Report SD print status -* M28 - Start SD write (M28 filename.g) -* M29 - Stop SD write -* M30 - Delete file from SD (M30 filename.g) -* M31 - Output time since last M109 or SD card start to serial -* M32 - Select file and start SD print (Can be used when printing from SD card) -* M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. -* M80 - Turn on Power Supply -* M81 - Turn off Power Supply -* M82 - Set E codes absolute (default) -* M83 - Set E codes relative while in Absolute Coordinates (G90) mode -* M84 - Disable steppers until next move, or use S[seconds] to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. -* M85 - Set inactivity shutdown timer with parameter S[seconds]. To disable set zero (default) -* M92 - Set axis_steps_per_unit - same syntax as G92 -* M104 - Set extruder target temp -* M105 - Read current temp -* M106 - Fan on -* M107 - Fan off -* M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating -* Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling -* M112 - Emergency stop -* M114 - Output current position to serial port -* M115 - Capabilities string -* M117 - display message -* M119 - Output Endstop status to serial port -* M126 - Solenoid Air Valve Open (BariCUDA support by jmil) -* M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) -* M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) -* M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) -* M140 - Set bed target temp -* M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating -* Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling -* M200 - D[millimeters]- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). -* M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) -* M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! -* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec -* M204 - Set default acceleration: P for Printing moves, R for Retract only (no X, Y, Z) moves and T for Travel (non printing) moves (ex. M204 P800 T3000 R9000) in mm/sec^2 -* M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk -* M206 - set additional homing offset -* M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting -* M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/min] -* M209 - S[1=true/0=false] enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. -* M218 - set hotend offset (in mm): T[extruder_number] X[offset_on_X] Y[offset_on_Y] -* M220 - S[factor in percent] - set speed factor override percentage -* M221 - S[factor in percent] - set extrude factor override percentage -* M240 - Trigger a camera to take a photograph -* M280 - Position an RC Servo P[index] S[angle/microseconds], ommit S to report back current angle -* M300 - Play beep sound S[frequency Hz] P[duration ms] -* M301 - Set PID parameters P I and D -* M302 - Allow cold extrudes -* M303 - PID relay autotune S[temperature] sets the target temperature. (default target temperature = 150C) -* M304 - Set bed PID parameters P I and D -* M350 - Set microstepping mode. -* M351 - Toggle MS1 MS2 pins directly. -* M400 - Finish all moves -* M401 - Lower z-probe if present -* M402 - Raise z-probe if present -* M404 - N[dia in mm] Enter the nominal filament width (3mm, 1.75mm) or will display nominal filament width without parameters -* M405 - Turn on Filament Sensor extrusion control. Optional D[delay in cm] to set delay in centimeters between sensor and extruder -* M406 - Turn off Filament Sensor extrusion control -* M407 - Displays measured filament diameter -* M500 - stores paramters in EEPROM -* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). -* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. -* M503 - print the current settings (from memory not from EEPROM) -* M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) -* M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] -* M907 - Set digital trimpot motor current using axis codes. -* M908 - Control digital trimpot directly. -* M928 - Start SD logging (M928 filename.g) - ended by M29 -* M999 - Restart after being stopped by error +``` +M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled) +M1 - Same as M0 +M17 - Enable/Power all stepper motors +M18 - Disable all stepper motors; same as M84 +M20 - List SD card +M21 - Init SD card +M22 - Release SD card +M23 - Select SD file (M23 filename.g) +M24 - Start/resume SD print +M25 - Pause SD print +M26 - Set SD position in bytes (M26 S12345) +M27 - Report SD print status +M28 - Start SD write (M28 filename.g) +M29 - Stop SD write +M30 - Delete file from SD (M30 filename.g) +M31 - Output time since last M109 or SD card start to serial +M32 - Select file and start SD print (Can be used _while_ printing from SD card files): + syntax "M32 /path/filename#", or "M32 S !filename#" + Call gcode file : "M32 P !filename#" and return to caller file after finishing (similar to #include). + The '#' is necessary when calling from within sd files, as it stops buffer prereading +M42 - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used. +M48 - Measure Z_Probe repeatability. M48 [n # of points] [X position] [Y position] [V_erboseness #] [E_ngage Probe] [L # of legs of travel] +M80 - Turn on Power Supply +M81 - Turn off Power Supply +M82 - Set E codes absolute (default) +M83 - Set E codes relative while in Absolute Coordinates (G90) mode +M84 - Disable steppers until next move, + or use S to specify an inactivity timeout, after which the steppers will be disabled. S0 to disable the timeout. +M85 - Set inactivity shutdown timer with parameter S. To disable set zero (default) +M92 - Set axis_steps_per_unit - same syntax as G92 +M104 - Set extruder target temp +M105 - Read current temp +M106 - Fan on +M107 - Fan off +M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating + Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling + IF AUTOTEMP is enabled, S B F. Exit autotemp by any M109 without F +M112 - Emergency stop +M114 - Output current position to serial port +M115 - Capabilities string +M117 - display message +M119 - Output Endstop status to serial port +M120 - Enable endstop detection +M121 - Disable endstop detection +M126 - Solenoid Air Valve Open (BariCUDA support by jmil) +M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil) +M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil) +M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil) +M140 - Set bed target temp +M150 - Set BlinkM Color Output R: Red<0-255> U(!): Green<0-255> B: Blue<0-255> over i2c, G for green does not work. +M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating + Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling +M200 D- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters). +M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000) +M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!! +M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec +M204 - Set default acceleration: P for Printing moves, R for Retract only (no X, Y, Z) moves and T for Travel (non printing) moves (ex. M204 P800 T3000 R9000) in mm/sec^2 +M205 - advanced settings: minimum travel speed S=while printing T=travel only, B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk +M206 - Set additional homing offset +M207 - Set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting +M208 - Set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/sec] +M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction. +M218 - Set hotend offset (in mm): T X Y +M220 S- set speed factor override percentage +M221 S- set extrude factor override percentage +M226 P S- Wait until the specified pin reaches the state required +M240 - Trigger a camera to take a photograph +M250 - Set LCD contrast C (value 0..63) +M280 - Set servo position absolute. P: servo index, S: angle or microseconds +M300 - Play beep sound S P +M301 - Set PID parameters P I and D +M302 - Allow cold extrudes, or set the minimum extrude S. +M303 - PID relay autotune S sets the target temperature. (default target temperature = 150C) +M304 - Set bed PID parameters P I and D +M380 - Activate solenoid on active extruder +M381 - Disable all solenoids +M400 - Finish all moves +M401 - Lower z-probe if present +M402 - Raise z-probe if present +M404 - N Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters +M405 - Turn on Filament Sensor extrusion control. Optional D to set delay in centimeters between sensor and extruder +M406 - Turn off Filament Sensor extrusion control +M407 - Display measured filament diameter +M500 - Store parameters in EEPROM +M501 - Read parameters from EEPROM (if you need reset them after you changed them temporarily). +M502 - Revert to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +M503 - Print the current settings (from memory not from EEPROM). Use S0 to leave off headings. +M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) +M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal] +M665 - Set delta configurations +M666 - Set delta endstop adjustment +M605 - Set dual x-carriage movement mode: S [ X R ] +M907 - Set digital trimpot motor current using axis codes. +M908 - Control digital trimpot directly. +M350 - Set microstepping mode. +M351 - Toggle MS1 MS2 pins directly. + +M928 - Start SD logging (M928 filename.g) - ended by M29 +M999 - Restart after being stopped by error +``` +## SCARA-specific M-Codes - May change to suit future G-code standards +``` +M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration) +M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree) +M362 - SCARA calibration: Move to cal-position PsiA (0 deg calibration) +M363 - SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree) +M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position) +M365 - SCARA calibration: Scaling factor, X, Y, Z axis +``` # Comments @@ -122,4 +151,4 @@ If you need to use a literal `;` somewhere (for example within `M117`), you can M117 backslash: \\;and a comment -Please note that hosts should strip any comments before sending GCODE to the printer in order to save bandwidth. \ No newline at end of file +Please note that hosts should strip any comments before sending GCODE to the printer in order to save bandwidth.