Adjusted coordinate system for Hibiscus (T2251)

- Shifted build area 2mm to the left.
master
Marcio Teixeira 7 years ago
parent fefb68a971
commit 929be0f460

@ -13,7 +13,7 @@
* got disabled.
*/
#define LULZBOT_FW_VERSION ".24" // Change this with each update
#define LULZBOT_FW_VERSION ".25" // Change this with each update
#if ( \
!defined(LULZBOT_Gladiola_Mini) && \
@ -452,8 +452,8 @@
/*********************** AUTOLEVELING / BED PROBE *******************************/
#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
#define LULZBOT_LEFT_PROBE_BED_POSITION -5
#define LULZBOT_RIGHT_PROBE_BED_POSITION 163
#define LULZBOT_LEFT_PROBE_BED_POSITION -3
#define LULZBOT_RIGHT_PROBE_BED_POSITION 161
#define LULZBOT_BACK_PROBE_BED_POSITION 167
#define LULZBOT_FRONT_PROBE_BED_POSITION -5
@ -1052,8 +1052,8 @@
#define LULZBOT_Y_BED_SIZE 155
#elif defined(LULZBOT_IS_MINI) && defined(LULZBOT_USE_Z_BELT)
#define LULZBOT_STANDARD_X_MAX_POS 163
#define LULZBOT_STANDARD_X_MIN_POS -5
#define LULZBOT_STANDARD_X_MAX_POS 161
#define LULZBOT_STANDARD_X_MIN_POS -3
#define LULZBOT_STANDARD_Y_MAX_POS 191
#define LULZBOT_STANDARD_Y_MIN_POS -6
@ -1478,8 +1478,8 @@
// Nozzle wiping points (varies by toolhead, as the nozzle position varies)
#if defined(LULZBOT_USE_AUTOLEVELING) && defined(LULZBOT_MINI_BED) && defined(LULZBOT_USE_Z_BELT)
// Mini has a horizontal wiping pad on the back of the bed
#define LULZBOT_STANDARD_WIPE_X1 43
#define LULZBOT_STANDARD_WIPE_X2 113
#define LULZBOT_STANDARD_WIPE_X1 45
#define LULZBOT_STANDARD_WIPE_X2 115
#define LULZBOT_STANDARD_WIPE_Y1 173
#define LULZBOT_STANDARD_WIPE_Y2 173
#define LULZBOT_STANDARD_WIPE_Z 1

Loading…
Cancel
Save