@ -176,7 +176,7 @@
* M304 - Set bed PID parameters P I and D . ( Requires PIDTEMPBED )
* M350 - Set microstepping mode . ( Requires digital microstepping pins . )
* M351 - Toggle MS1 MS2 pins directly . ( Requires digital microstepping pins . )
* M355 - Turn the Case Light on / off and set its brightness . ( Requires CASE_LIGHT_PIN )
* M355 - Set Case Light on / off and set brightness . ( Requires CASE_LIGHT_PIN )
* M380 - Activate solenoid on active extruder . ( Requires EXT_SOLENOID )
* M381 - Disable all solenoids . ( Requires EXT_SOLENOID )
* M400 - Finish all moves .
@ -566,16 +566,6 @@ static uint8_t target_extruder;
;
# endif
# if HAS_CASE_LIGHT
bool case_light_on =
# if ENABLED(CASE_LIGHT_DEFAULT_ON)
true
# else
false
# endif
;
# endif
# if ENABLED(DELTA)
float delta [ ABC ] ,
@ -720,7 +710,8 @@ static void report_current_position();
SERIAL_ECHOPAIR ( " , " , z ) ;
SERIAL_CHAR ( ' ) ' ) ;
suffix ? serialprintPGM ( suffix ) : SERIAL_EOL ;
if ( suffix ) { serialprintPGM ( suffix ) ; } //won't compile for Teensy with the previous construction
else SERIAL_EOL ;
}
void print_xyz ( const char * prefix , const char * suffix , const float xyz [ ] ) {
@ -5263,7 +5254,7 @@ void home_all_axes() { gcode_G28(true); }
recalc_delta_settings ( delta_radius , delta_diagonal_rod ) ;
}
else if ( zero_std_dev > = test_precision ) { // step one back
else if ( zero_std_dev > = test_precision ) { // step one back
COPY ( endstop_adj , e_old ) ;
delta_radius = dr_old ;
home_offset [ Z_AXIS ] = zh_old ;
@ -7678,11 +7669,18 @@ inline void gcode_M115() {
SERIAL_PROTOCOLLNPGM ( " Cap:SOFTWARE_POWER:0 " ) ;
# endif
// TOGGLE_ LIGHTS (M355)
// CASE LIGHTS (M355)
# if HAS_CASE_LIGHT
SERIAL_PROTOCOLLNPGM ( " Cap:TOGGLE_LIGHTS:1 " ) ;
bool USEABLE_HARDWARE_PWM ( uint8_t pin ) ;
if ( USEABLE_HARDWARE_PWM ( CASE_LIGHT_PIN ) ) {
SERIAL_PROTOCOLLNPGM ( " Cap:CASE_LIGHT_BRIGHTNESS:1 " ) ;
}
else
SERIAL_PROTOCOLLNPGM ( " Cap:CASE_LIGHT_BRIGHTNESS:0 " ) ;
# else
SERIAL_PROTOCOLLNPGM ( " Cap:TOGGLE_LIGHTS:0 " ) ;
SERIAL_PROTOCOLLNPGM ( " Cap:CASE_LIGHT_BRIGHTNESS:0 " ) ;
# endif
// EMERGENCY_PARSER (M108, M112, M410)
@ -9472,30 +9470,54 @@ inline void gcode_M907() {
# endif // HAS_MICROSTEPS
# if HAS_CASE_LIGHT
uint8_t case_light_brightness = 255 ;
# ifndef INVERT_CASE_LIGHT
# define INVERT_CASE_LIGHT false
# endif
int case_light_brightness ; // LCD routine wants INT
bool case_light_on ;
void update_case_light ( ) {
WRITE ( CASE_LIGHT_PIN , case_light_on ! = INVERT_CASE_LIGHT ? HIGH : LOW ) ;
analogWrite ( CASE_LIGHT_PIN , case_light_on ! = INVERT_CASE_LIGHT ? case_light_brightness : 0 ) ;
pinMode ( CASE_LIGHT_PIN , OUTPUT ) ; // digitalWrite doesn't set the port mode
uint8_t case_light_bright = ( uint8_t ) case_light_brightness ;
if ( case_light_on ) {
if ( USEABLE_HARDWARE_PWM ( CASE_LIGHT_PIN ) ) {
analogWrite ( CASE_LIGHT_PIN , INVERT_CASE_LIGHT ? 255 - case_light_brightness : case_light_brightness ) ;
}
else digitalWrite ( CASE_LIGHT_PIN , INVERT_CASE_LIGHT ? LOW : HIGH ) ;
}
else digitalWrite ( CASE_LIGHT_PIN , INVERT_CASE_LIGHT ? HIGH : LOW ) ;
}
# endif // HAS_CASE_LIGHT
/**
* M355 : Turn case lights on / off and set brightness
* M355 : Turn case light on / off and set brightness
*
* P < byte > Set case light brightness ( PWM pin required - ignored otherwise )
*
* S < bool > Set case light on / off
*
* When S turns on the light on a PWM pin then the current brightness level is used / restored
*
* S < bool > Turn case light on or off
* P < byte > Set case light brightness ( PWM pin required )
* M355 P200 S0 turns off the light & sets the brightness level
* M355 S1 turns on the light with a brightness of 200 ( assuming a PWM pin )
*/
inline void gcode_M355 ( ) {
# if HAS_CASE_LIGHT
if ( parser . seen ( ' P ' ) ) case_light_brightness = parser . value_byte ( ) ;
if ( parser . seen ( ' S ' ) ) case_light_on = parser . value_bool ( ) ;
update_case_light ( ) ;
uint8_t args = 0 ;
if ( parser . seen ( ' P ' ) ) + + args , case_light_brightness = parser . value_byte ( ) ;
if ( parser . seen ( ' S ' ) ) + + args , case_light_on = parser . value_bool ( ) ;
if ( args ) update_case_light ( ) ;
// always report case light status
SERIAL_ECHO_START ;
SERIAL_ECHOPGM ( " Case lights " ) ;
case_light_on ? SERIAL_ECHOLNPGM ( " on " ) : SERIAL_ECHOLNPGM ( " off " ) ;
if ( ! case_light_on ) {
SERIAL_ECHOLN ( " Case light: off " ) ;
}
else {
if ( ! USEABLE_HARDWARE_PWM ( CASE_LIGHT_PIN ) ) SERIAL_ECHOLN ( " Case light: on " ) ;
else SERIAL_ECHOLNPAIR ( " Case light: " , case_light_brightness ) ;
}
# else
SERIAL_ERROR_START ;
SERIAL_ERRORLNPGM ( MSG_ERR_M355_NONE ) ;
@ -10710,7 +10732,7 @@ void process_next_command() {
# endif // HAS_MICROSTEPS
case 355 : // M355 Turn case lights on/off
case 355 : // M355 set case light brightness
gcode_M355 ( ) ;
break ;
@ -12459,6 +12481,8 @@ void setup() {
# endif
# if HAS_CASE_LIGHT
case_light_on = CASE_LIGHT_DEFAULT_ON ;
case_light_brightness = CASE_LIGHT_DEFAULT_BRIGHTNESS ;
update_case_light ( ) ;
# endif
Bob-the-Kuhn
7 years ago