diff --git a/Documentation/MeshBedLeveling.md b/Documentation/MeshBedLeveling.md
index 7981a896c..09c1ec948 100644
--- a/Documentation/MeshBedLeveling.md
+++ b/Documentation/MeshBedLeveling.md
@@ -7,7 +7,7 @@ Background
 
 This mesh based method of leveling/compensating can compensate for an non-flat bed. There are various opinions about doing this. It was primarily written to compensate a RigidBot BIG bed (40x30cm) that was somewhat bent.
 
-Currently there is no automatic way to probe the bed like the Auto Bed Leveling feature. This might soon be implemented though, stay tuned.
+Currently there is no automatic way to probe the bed like the Auto Bed Leveling feature. So, you can not enable `ENABLE_AUTO_BED_LEVELING` at the same time. This might soon be implemented though, stay tuned.
 
 Theory
 ------
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 419e010dc..7803bdd0a 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -417,6 +417,10 @@ const bool Z_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the logic
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/configurator/config/Configuration.h b/Marlin/configurator/config/Configuration.h
index bb8125ef1..cd260bf89 100644
--- a/Marlin/configurator/config/Configuration.h
+++ b/Marlin/configurator/config/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h
index 49df589dd..fe95e1a2e 100644
--- a/Marlin/example_configurations/Felix/Configuration.h
+++ b/Marlin/example_configurations/Felix/Configuration.h
@@ -387,6 +387,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/Hephestos/Configuration.h b/Marlin/example_configurations/Hephestos/Configuration.h
index f58fd8315..04a9060c2 100644
--- a/Marlin/example_configurations/Hephestos/Configuration.h
+++ b/Marlin/example_configurations/Hephestos/Configuration.h
@@ -410,6 +410,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/K8200/Configuration.h b/Marlin/example_configurations/K8200/Configuration.h
index 07af43647..5655219dd 100644
--- a/Marlin/example_configurations/K8200/Configuration.h
+++ b/Marlin/example_configurations/K8200/Configuration.h
@@ -415,6 +415,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h
index 8a85e8e80..8e4a5ea7d 100644
--- a/Marlin/example_configurations/SCARA/Configuration.h
+++ b/Marlin/example_configurations/SCARA/Configuration.h
@@ -439,6 +439,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/WITBOX/Configuration.h b/Marlin/example_configurations/WITBOX/Configuration.h
index ed964304f..1bde59441 100644
--- a/Marlin/example_configurations/WITBOX/Configuration.h
+++ b/Marlin/example_configurations/WITBOX/Configuration.h
@@ -409,6 +409,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h
index acd6d9f34..5a25872b0 100644
--- a/Marlin/example_configurations/delta/generic/Configuration.h
+++ b/Marlin/example_configurations/delta/generic/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
index bc0a000e0..a5ebffcdd 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h
@@ -437,6 +437,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h
index 557b15fe2..c3566eb57 100644
--- a/Marlin/example_configurations/makibox/Configuration.h
+++ b/Marlin/example_configurations/makibox/Configuration.h
@@ -407,6 +407,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
index e9158b041..c88fe8128 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h
@@ -409,6 +409,10 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 #ifdef ENABLE_AUTO_BED_LEVELING
 
+  #ifdef MESH_BED_LEVELING
+    #error Select 'ENABLE_AUTO_BED_LEVELING' or 'MESH_BED_LEVELING', not both
+  #endif // MESH_BED_LEVELING
+
   // There are 2 different ways to specify probing locations
   //
   // - "grid" mode