From 9a4af6bd7c038b239588eeda3eb5e473e5da6286 Mon Sep 17 00:00:00 2001
From: Scott Lahteine <github@thinkyhead.com>
Date: Fri, 15 Dec 2017 16:04:52 -0600
Subject: [PATCH] Add NANODLP_ALL_AXIS to config examples

---
 .../AlephObjects/TAZ4/Configuration_adv.h                     | 4 ++++
 Marlin/example_configurations/Anet/A6/Configuration_adv.h     | 4 ++++
 Marlin/example_configurations/Anet/A8/Configuration_adv.h     | 4 ++++
 .../example_configurations/BQ/Hephestos/Configuration_adv.h   | 4 ++++
 .../example_configurations/BQ/Hephestos_2/Configuration_adv.h | 4 ++++
 Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h   | 4 ++++
 Marlin/example_configurations/Cartesio/Configuration_adv.h    | 4 ++++
 .../example_configurations/Creality/CR-10/Configuration_adv.h | 4 ++++
 Marlin/example_configurations/Felix/Configuration_adv.h       | 4 ++++
 .../FolgerTech/i3-2020/Configuration_adv.h                    | 4 ++++
 .../Infitary/i3-M508/Configuration_adv.h                      | 4 ++++
 Marlin/example_configurations/Malyan/M150/Configuration_adv.h | 4 ++++
 .../Micromake/C1/enhanced/Configuration_adv.h                 | 4 ++++
 Marlin/example_configurations/RigidBot/Configuration_adv.h    | 4 ++++
 Marlin/example_configurations/SCARA/Configuration_adv.h       | 4 ++++
 .../example_configurations/Sanguinololu/Configuration_adv.h   | 4 ++++
 Marlin/example_configurations/TinyBoy2/Configuration_adv.h    | 4 ++++
 .../example_configurations/Velleman/K8200/Configuration_adv.h | 4 ++++
 .../example_configurations/Velleman/K8400/Configuration_adv.h | 4 ++++
 .../Wanhao/Duplicator 6/Configuration_adv.h                   | 4 ++++
 .../delta/FLSUN/auto_calibrate/Configuration_adv.h            | 4 ++++
 .../delta/FLSUN/kossel_mini/Configuration_adv.h               | 4 ++++
 .../example_configurations/delta/generic/Configuration_adv.h  | 4 ++++
 .../delta/kossel_mini/Configuration_adv.h                     | 4 ++++
 .../delta/kossel_pro/Configuration_adv.h                      | 4 ++++
 .../delta/kossel_xl/Configuration_adv.h                       | 4 ++++
 .../gCreate/gMax1.5+/Configuration_adv.h                      | 4 ++++
 Marlin/example_configurations/makibox/Configuration_adv.h     | 4 ++++
 .../example_configurations/tvrrug/Round2/Configuration_adv.h  | 4 ++++
 Marlin/example_configurations/wt150/Configuration_adv.h       | 4 ++++
 30 files changed, 120 insertions(+)

diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
index d7478e684..5eb56dcfd 100644
--- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
index 1e556c36d..dad62f700 100644
--- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
index 0cd3796d3..05c9befe6 100644
--- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h
+++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
index 6e1dd12a4..f610717e4 100644
--- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
index 04dca8e98..03decf76f 100644
--- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
index 6e1dd12a4..f610717e4 100644
--- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 1ef1df35b..4f1084c5d 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
index 5ebc2c0fa..25e631d22 100755
--- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h
@@ -1562,5 +1562,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 8f7ca8b51..903ea8d09 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
index f9e2f45fb..e6ff3e506 100644
--- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
index bf47651b8..4a0ae9b12 100644
--- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
index 3208774d3..d5685033a 100644
--- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
+++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
index 806a0d92c..49dffb376 100644
--- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h
@@ -1560,5 +1560,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 6aa1658d9..c1d49a5b9 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index c871f880f..791f8cefb 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
index d666d175a..a447bfa49 100644
--- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
+++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h
@@ -1526,5 +1526,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
index 0f86a306b..a15ee4439 100644
--- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
+++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
index b37b397d4..e8e25031a 100644
--- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h
@@ -1570,5 +1570,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
index d64da998d..06517f43e 100644
--- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h
index b64fb2d5d..a9383c7de 100644
--- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
+++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h	
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 70704fe15..910c4b740 100644
--- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
index 388f5ecdf..a2c7a0242 100644
--- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index 388f5ecdf..a2c7a0242 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index 388f5ecdf..a2c7a0242 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index 061b44dff..0ed880e23 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -1566,5 +1566,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index 98733b96b..e2bc53b0c 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -1561,5 +1561,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
index d8b30cbdc..5c1f232d9 100644
--- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h
@@ -1560,5 +1560,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index c0924d4df..51704a8c7 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 6dc7b28f8..1c035e7c9 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -1559,5 +1559,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H
diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h
index 6d8ba1c2d..6a394e9bb 100644
--- a/Marlin/example_configurations/wt150/Configuration_adv.h
+++ b/Marlin/example_configurations/wt150/Configuration_adv.h
@@ -1549,5 +1549,9 @@
  * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
  */
 //#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+  //#define NANODLP_ALL_AXIS  // Enables "Z_move_comp" output on any axis move.
+                              // Default behaviour is limited to Z axis only.
+#endif
 
 #endif // CONFIGURATION_ADV_H