Remove extra @section directive from configs

Marlin/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/Felix/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/Hephestos/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/Hephestos_2/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -290,8 +290,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/RigidBot/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/SCARA/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/TAZ4/Configuration_adv.h

@@ -292,8 +292,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/WITBOX/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/delta/biv2.5/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/delta/generic/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h

@@ -289,8 +289,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/makibox/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false

Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h

@@ -284,8 +284,6 @@
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
 
-// @section machine
-
 //By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false